! Started logfile: /vlbi/uf001/uvm//J1302+5748_X_a_dfm.log on Sun Jan 13 21:37:04 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1302+5748_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1302+5748_X_a_uvm.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! AN table 2: 12 integrations on 28 of 28 possible baselines. ! AN table 3: 8 integrations on 1 of 1 possible baselines. ! AN table 4: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.751997 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 22596 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1302+5748_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 83 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.097450Jy sigma=21.679195 ! Fit after self-cal, rms=0.548970Jy sigma=10.873815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7154 mas, bmaj=1.007 mas, bpa=-11.33 degrees ! Estimated noise=0.361492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.345746 Jy ! Component: 100 - total flux cleaned = 0.422936 Jy ! Total flux subtracted in 100 components = 0.422936 Jy ! Clean residual min=-0.012157 max=0.026307 Jy/beam ! Clean residual mean=-0.000009 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.422937 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.422937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093929Jy sigma=1.826963 ! Fit after self-cal, rms=0.093927Jy sigma=1.826926 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264114 Jy ! Component: 100 - total flux cleaned = 0.0376005 Jy ! Total flux subtracted in 100 components = 0.0376005 Jy ! Clean residual min=-0.011128 max=0.009580 Jy/beam ! Clean residual mean=-0.000008 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.460537 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.460537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084220Jy sigma=1.638997 ! Fit after self-cal, rms=0.084214Jy sigma=1.638865 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9082 mas, bmaj=1.254 mas, bpa=-6.373 degrees ! Estimated noise=0.254544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014703 Jy ! Component: 100 - total flux cleaned = 0.0243987 Jy ! Component: 150 - total flux cleaned = 0.0294433 Jy ! Component: 200 - total flux cleaned = 0.0310335 Jy ! Total flux subtracted in 200 components = 0.0310335 Jy ! Clean residual min=-0.007150 max=0.010703 Jy/beam ! Clean residual mean=-0.000035 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.491571 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 0.49157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081008Jy sigma=1.577353 ! Fit after self-cal, rms=0.080829Jy sigma=1.573622 ! Inverting map ! Added new window around map position (-1.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103254 Jy ! Component: 100 - total flux cleaned = 0.0135567 Jy ! Component: 150 - total flux cleaned = 0.0159007 Jy ! Component: 200 - total flux cleaned = 0.0173891 Jy ! Total flux subtracted in 200 components = 0.0173891 Jy ! Clean residual min=-0.006642 max=0.006776 Jy/beam ! Clean residual mean=-0.000028 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.508959 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.508959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079169Jy sigma=1.539548 ! Fit after self-cal, rms=0.079111Jy sigma=1.538414 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9082 x 1.254 at -6.373 degrees (North through East) ! Clean map min=-0.0064769 max=0.45227 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.95 KP 1.00 ! LA 1.00 MK 1.03 NL 1.05 OV 0.93 ! PT 0.90 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 0.95 LA 1.00 MK 1.01 ! NL 1.15 OV 1.06 PT 1.00 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 HN 0.92 KP 0.99 LA 0.94 ! MK 1.04 NL 1.00 OV 0.87 PT 0.90 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.97 KP 1.00 ! LA 0.99 MK 1.04 NL 1.06 OV 0.93 ! PT 0.91 SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.94 LA 0.97 MK 1.03 ! NL 1.12 OV 1.04 PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.93 KP 0.94 LA 0.94 ! MK 1.02 NL 1.04 OV 0.88 PT 0.85 ! SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.96 KP 1.01 ! LA 0.98 MK 1.05 NL 1.05 OV 0.93 ! PT 0.90 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 0.96 LA 1.00 MK 1.04 ! NL 1.13 OV 1.09 PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.93 KP 0.95 LA 0.95 ! MK 1.05 NL 1.02 OV 0.88 PT 0.89 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.96 KP 1.02 ! LA 0.97 MK 1.05 NL 1.06 OV 0.93 ! PT 0.91 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.96 LA 0.98 MK 1.01 ! NL 1.13 OV 1.06 PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 HN 0.93 KP 0.99 LA 0.95 ! MK 1.05 NL 1.03 OV 0.86 PT 0.87 ! SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.97 KP 1.01 ! LA 0.98 MK 1.04 NL 1.05 OV 0.93 ! PT 0.91 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.95 LA 1.01 MK 1.02 ! NL 1.16 OV 1.06 PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 HN 0.94 KP 1.00 LA 0.96 ! MK 1.02 NL 1.03 OV 0.88 PT 0.87 ! SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.97 KP 1.01 ! LA 0.99 MK 1.04 NL 1.06 OV 0.93 ! PT 0.90 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.96 LA 1.01 MK 1.03 ! NL 1.18 OV 1.04 PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.94 KP 1.00 LA 0.95 ! MK 1.09 NL 1.04 OV 0.88 PT 0.87 ! SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.98 KP 1.02 ! LA 0.98 MK 1.04 NL 1.05 OV 0.93 ! PT 0.92 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 0.94 LA 1.00 MK 1.04 ! NL 1.15 OV 1.05 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.92 KP 0.96 LA 0.98 ! MK 1.07 NL 1.04 OV 0.90 PT 0.87 ! SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.98 KP 1.02 ! LA 0.99 MK 1.06 NL 1.05 OV 0.92 ! PT 0.92 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.00 LA 0.98 MK 1.04 ! NL 1.14 OV 1.09 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 HN 0.91 KP 0.97 LA 0.96 ! MK 1.05 NL 1.03 OV 0.89 PT 0.90 ! SC 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.98 KP 1.01 ! LA 0.99 MK 1.06 NL 1.05 OV 0.93 ! PT 0.91 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 0.95 LA 1.02 MK 1.05 ! NL 1.18 OV 1.06 PT 1.04 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 HN 0.96 KP 0.99 LA 0.95 ! MK 1.07 NL 1.01 OV 0.92 PT 0.93 ! SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.99 KP 1.02 ! LA 0.99 MK 1.05 NL 1.05 OV 0.93 ! PT 0.91 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 0.98 LA 0.99 MK 1.03 ! NL 1.16 OV 1.08 PT 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.95 KP 1.01 LA 0.97 ! MK 1.04 NL 1.04 OV 0.88 PT 0.90 ! SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.97 KP 1.01 ! LA 0.99 MK 1.04 NL 1.05 OV 0.93 ! PT 0.91 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.96 LA 0.98 MK 1.05 ! NL 1.14 OV 1.11 PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 HN 0.96 KP 1.01 LA 0.97 ! MK 1.12 NL 1.02 OV 0.91 PT 0.88 ! SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.98 KP 1.02 ! LA 0.99 MK 1.02 NL 1.06 OV 0.94 ! PT 0.90 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.97 LA 0.99 MK 1.06 ! NL 1.16 OV 1.05 PT 1.04 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 0.90 KP 1.01 LA 0.98 ! MK 1.04 NL 1.06 OV 0.88 PT 0.88 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.079111Jy sigma=1.538414 ! Fit after self-cal, rms=0.070992Jy sigma=1.373717 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=1.257 mas, bpa=-6.002 degrees ! Estimated noise=0.254692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00599909 Jy ! Component: 100 - total flux cleaned = -0.0102005 Jy ! Component: 150 - total flux cleaned = -0.0125575 Jy ! Component: 200 - total flux cleaned = -0.0129996 Jy ! Total flux subtracted in 200 components = -0.0129996 Jy ! Clean residual min=-0.004908 max=0.004408 Jy/beam ! Clean residual mean=-0.000010 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.49596 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.49596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070308Jy sigma=1.360515 ! Fit after self-cal, rms=0.070315Jy sigma=1.360326 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070315Jy sigma=1.360326 ! Fit after self-cal, rms=0.056706Jy sigma=1.024903 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9106 mas, bmaj=1.257 mas, bpa=-5.97 degrees ! Estimated noise=0.254699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225199 Jy ! Component: 100 - total flux cleaned = -0.00356453 Jy ! Component: 150 - total flux cleaned = -0.00407674 Jy ! Component: 200 - total flux cleaned = -0.00414887 Jy ! Total flux subtracted in 200 components = -0.00414887 Jy ! Clean residual min=-0.001820 max=0.001688 Jy/beam ! Clean residual mean=-0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.491811 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.491811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056382Jy sigma=1.018904 ! Fit after self-cal, rms=0.056415Jy sigma=1.018587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125916 Jy ! Component: 100 - total flux cleaned = -0.000366178 Jy ! Component: 150 - total flux cleaned = -0.000477263 Jy ! Component: 200 - total flux cleaned = -0.000631122 Jy ! Total flux subtracted in 200 components = -0.000631122 Jy ! Clean residual min=-0.001671 max=0.001604 Jy/beam ! Clean residual mean=-0.000002 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.49118 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.49118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056301Jy sigma=1.016503 ! Fit after self-cal, rms=0.056298Jy sigma=1.016470 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056298Jy sigma=1.016470 ! Fit after self-cal, rms=0.056266Jy sigma=1.014762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9093 mas, bmaj=1.256 mas, bpa=-6.014 degrees ! Estimated noise=0.254896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132086 Jy ! Component: 100 - total flux cleaned = -0.00182042 Jy ! Component: 150 - total flux cleaned = -0.00194374 Jy ! Component: 200 - total flux cleaned = -0.00194586 Jy ! Total flux subtracted in 200 components = -0.00194586 Jy ! Clean residual min=-0.001460 max=0.001593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.489234 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.489234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056110Jy sigma=1.011988 ! Fit after self-cal, rms=0.056110Jy sigma=1.011973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937273 Jy ! Component: 100 - total flux cleaned = 0.000989117 Jy ! Component: 150 - total flux cleaned = 0.000944531 Jy ! Component: 200 - total flux cleaned = 0.000901431 Jy ! Total flux subtracted in 200 components = 0.000901431 Jy ! Clean residual min=-0.001441 max=0.001376 Jy/beam ! Clean residual mean=-0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.490135 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 0.490136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056029Jy sigma=1.010437 ! Fit after self-cal, rms=0.056027Jy sigma=1.010403 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056027Jy sigma=1.010403 ! Fit after self-cal, rms=0.056041Jy sigma=1.009621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=2.315 mas, bpa=-4.656 degrees ! Estimated noise=0.340947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258941 Jy ! Component: 100 - total flux cleaned = -0.000407272 Jy ! Component: 150 - total flux cleaned = -0.00049047 Jy ! Component: 200 - total flux cleaned = -0.000528022 Jy ! Total flux subtracted in 200 components = -0.000528022 Jy ! Clean residual min=-0.001329 max=0.001624 Jy/beam ! Clean residual mean=-0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.489608 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.489607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056020Jy sigma=1.009286 ! Fit after self-cal, rms=0.056018Jy sigma=1.009241 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103981 Jy ! Component: 100 - total flux cleaned = -0.000156879 Jy ! Component: 150 - total flux cleaned = -0.0002595 Jy ! Component: 200 - total flux cleaned = -0.000406513 Jy ! Total flux subtracted in 200 components = -0.000406513 Jy ! Clean residual min=-0.001363 max=0.001202 Jy/beam ! Clean residual mean=-0.000002 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.489201 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.489201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055970Jy sigma=1.008421 ! Fit after self-cal, rms=0.055968Jy sigma=1.008358 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9083 mas, bmaj=1.256 mas, bpa=-6.063 degrees ! Estimated noise=0.255101 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9083 x 1.256 at -6.063 degrees (North through East) ! Clean map min=-0.0026 max=0.45315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7146 mas, bmaj=1.007 mas, bpa=-11.09 degrees ! Estimated noise=0.364411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.348308 Jy ! Component: 100 - total flux cleaned = 0.426093 Jy ! Component: 150 - total flux cleaned = 0.452898 Jy ! Component: 200 - total flux cleaned = 0.46524 Jy ! Total flux subtracted in 200 components = 0.46524 Jy ! Clean residual min=-0.004115 max=0.005694 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.46524 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.46524 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9083 mas, bmaj=1.256 mas, bpa=-6.063 degrees ! Estimated noise=0.255101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784527 Jy ! Component: 100 - total flux cleaned = 0.0126846 Jy ! Component: 150 - total flux cleaned = 0.0159013 Jy ! Component: 200 - total flux cleaned = 0.0178754 Jy ! Total flux subtracted in 200 components = 0.0178754 Jy ! Clean residual min=-0.001672 max=0.001935 Jy/beam ! Clean residual mean=-0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.483115 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.483115 Jy ! Inverting map ! Added new window around map position (-0.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153559 Jy ! Component: 100 - total flux cleaned = 0.00269509 Jy ! Component: 150 - total flux cleaned = 0.00366621 Jy ! Component: 200 - total flux cleaned = 0.00428236 Jy ! Total flux subtracted in 200 components = 0.00428236 Jy ! Clean residual min=-0.001602 max=0.001425 Jy/beam ! Clean residual mean=-0.000002 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.487398 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.487398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=2.315 mas, bpa=-4.656 degrees ! Estimated noise=0.340947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154223 Jy ! Component: 100 - total flux cleaned = 0.00179209 Jy ! Component: 150 - total flux cleaned = 0.00184392 Jy ! Component: 200 - total flux cleaned = 0.00193147 Jy ! Total flux subtracted in 200 components = 0.00193147 Jy ! Clean residual min=-0.001321 max=0.001306 Jy/beam ! Clean residual mean=-0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.489329 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.79029e-05 Jy ! Component: 100 - total flux cleaned = 3.09083e-06 Jy ! Component: 150 - total flux cleaned = 3.2444e-05 Jy ! Component: 200 - total flux cleaned = 3.14916e-05 Jy ! Total flux subtracted in 200 components = 3.14916e-05 Jy ! Clean residual min=-0.001330 max=0.001242 Jy/beam ! Clean residual mean=-0.000003 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.489361 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 99 components and 0.489361 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9083 mas, bmaj=1.256 mas, bpa=-6.063 degrees ! Estimated noise=0.255101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395738 Jy ! Component: 100 - total flux cleaned = -0.000338148 Jy ! Component: 150 - total flux cleaned = -0.000237204 Jy ! Component: 200 - total flux cleaned = -0.000238251 Jy ! Total flux subtracted in 200 components = -0.000238251 Jy ! Clean residual min=-0.001319 max=0.001286 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.489122 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.489122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055916Jy sigma=1.008125 ! Fit after self-cal, rms=0.055904Jy sigma=1.007884 wmodel J1302+5748_X_a_map.mod ! Writing 116 model components to file: J1302+5748_X_a_map.mod wobs J1302+5748_X_a_uvs.fits ! Writing UV FITS file: J1302+5748_X_a_uvs.fits wwins J1302+5748_X_a_map.win ! wwins: Wrote 6 windows to J1302+5748_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.66241e-05 Jy ! Component: 100 - total flux cleaned = 0.000331117 Jy ! Component: 150 - total flux cleaned = 0.000584027 Jy ! Component: 200 - total flux cleaned = 0.000706634 Jy ! Component: 250 - total flux cleaned = 0.000806736 Jy ! Component: 300 - total flux cleaned = 0.000905036 Jy ! Component: 350 - total flux cleaned = 0.00106034 Jy ! Component: 400 - total flux cleaned = 0.00121344 Jy ! Component: 450 - total flux cleaned = 0.00130802 Jy ! Component: 500 - total flux cleaned = 0.00143929 Jy ! Component: 550 - total flux cleaned = 0.00155051 Jy ! Component: 600 - total flux cleaned = 0.00166081 Jy ! Component: 650 - total flux cleaned = 0.00178812 Jy ! Component: 700 - total flux cleaned = 0.00189608 Jy ! Component: 750 - total flux cleaned = 0.00189615 Jy ! Component: 800 - total flux cleaned = 0.0020204 Jy ! Component: 850 - total flux cleaned = 0.00209067 Jy ! Component: 900 - total flux cleaned = 0.00217774 Jy ! Component: 950 - total flux cleaned = 0.00217775 Jy ! Component: 1000 - total flux cleaned = 0.00234987 Jy ! Component: 1050 - total flux cleaned = 0.00238385 Jy ! Component: 1100 - total flux cleaned = 0.00243478 Jy ! Component: 1150 - total flux cleaned = 0.00251932 Jy ! Component: 1200 - total flux cleaned = 0.00260327 Jy ! Component: 1250 - total flux cleaned = 0.00265347 Jy ! Component: 1300 - total flux cleaned = 0.00270342 Jy ! Component: 1350 - total flux cleaned = 0.00275292 Jy ! Component: 1400 - total flux cleaned = 0.00276932 Jy ! Component: 1450 - total flux cleaned = 0.00283472 Jy ! Component: 1500 - total flux cleaned = 0.00293238 Jy ! Component: 1550 - total flux cleaned = 0.00302931 Jy ! Component: 1600 - total flux cleaned = 0.00298103 Jy ! Component: 1650 - total flux cleaned = 0.00306119 Jy ! Component: 1700 - total flux cleaned = 0.00307705 Jy ! Component: 1750 - total flux cleaned = 0.00318808 Jy ! Component: 1800 - total flux cleaned = 0.00317229 Jy ! Component: 1850 - total flux cleaned = 0.00320369 Jy ! Component: 1900 - total flux cleaned = 0.00323509 Jy ! Component: 1950 - total flux cleaned = 0.00321953 Jy ! Component: 2000 - total flux cleaned = 0.00328175 Jy ! Component: 2050 - total flux cleaned = 0.00335913 Jy ! Component: 2100 - total flux cleaned = 0.00340535 Jy ! Component: 2150 - total flux cleaned = 0.00345146 Jy ! Component: 2200 - total flux cleaned = 0.00345153 Jy ! Component: 2250 - total flux cleaned = 0.00355831 Jy ! Component: 2300 - total flux cleaned = 0.00357352 Jy ! Component: 2350 - total flux cleaned = 0.00354322 Jy ! Component: 2400 - total flux cleaned = 0.00358861 Jy ! Component: 2450 - total flux cleaned = 0.00367877 Jy ! Component: 2500 - total flux cleaned = 0.00363381 Jy ! Component: 2550 - total flux cleaned = 0.00372334 Jy ! Component: 2600 - total flux cleaned = 0.00379772 Jy ! Component: 2650 - total flux cleaned = 0.0038569 Jy ! Component: 2700 - total flux cleaned = 0.00382735 Jy ! Component: 2750 - total flux cleaned = 0.00385678 Jy ! Component: 2800 - total flux cleaned = 0.00390069 Jy ! Component: 2850 - total flux cleaned = 0.00394453 Jy ! Component: 2900 - total flux cleaned = 0.0039154 Jy ! Component: 2950 - total flux cleaned = 0.00398802 Jy ! Component: 3000 - total flux cleaned = 0.00397359 Jy ! Component: 3050 - total flux cleaned = 0.00401692 Jy ! Component: 3100 - total flux cleaned = 0.00401684 Jy ! Component: 3150 - total flux cleaned = 0.00410288 Jy ! Component: 3200 - total flux cleaned = 0.00410286 Jy ! Component: 3250 - total flux cleaned = 0.0040744 Jy ! Component: 3300 - total flux cleaned = 0.00407437 Jy ! Component: 3350 - total flux cleaned = 0.00414519 Jy ! Component: 3400 - total flux cleaned = 0.00411694 Jy ! Component: 3450 - total flux cleaned = 0.00424365 Jy ! Component: 3500 - total flux cleaned = 0.0042296 Jy ! Component: 3550 - total flux cleaned = 0.00421551 Jy ! Component: 3600 - total flux cleaned = 0.00421544 Jy ! Component: 3650 - total flux cleaned = 0.00424319 Jy ! Component: 3700 - total flux cleaned = 0.00427095 Jy ! Component: 3750 - total flux cleaned = 0.00425713 Jy ! Component: 3800 - total flux cleaned = 0.00429845 Jy ! Component: 3850 - total flux cleaned = 0.00427093 Jy ! Component: 3900 - total flux cleaned = 0.00427088 Jy ! Component: 3950 - total flux cleaned = 0.00427082 Jy ! Component: 4000 - total flux cleaned = 0.0042981 Jy ! Component: 4050 - total flux cleaned = 0.0043117 Jy ! Total flux subtracted in 4096 components = 0.0043253 Jy ! Clean residual min=-0.000746 max=0.000833 Jy/beam ! Clean residual mean=-0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.493448 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 475 components and 0.493448 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1302+5748_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9083 x 1.256 at -6.063 degrees (North through East) ! Clean map min=-0.0023907 max=0.45413 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1302+5748_X_a_map.fits wmodel /vlbi/uf001/uvm//J1302+5748_X_a_map.mod ! Writing 475 model components to file: /vlbi/uf001/uvm//J1302+5748_X_a_map.mod wobs /vlbi/uf001/uvm//J1302+5748_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1302+5748_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1302+5748_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J1302+5748_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.454125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233043 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.153951 0.153951 0.307902 0.615804 1.23161 2.46322 4.92643 9.85286 19.7057 39.4114 78.8229 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.454 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1948.67 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1302+5748_X_a_dfm.log closed on Sun Jan 13 21:37:10 2019