! Started logfile: /vlbi/uf001/uva//J1300+1206_S_dfm.log on Mon Jan 14 02:08:47 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1300+1206_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1300+1206_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.910185 visibilities/baseline/integration-bin.
! Found source: J1300+1206
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8847 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1300+1206_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028496Jy  sigma=21.919961
! Fit after  self-cal, rms=0.815163Jy  sigma=17.336590
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.814 mas, bmaj=7.828 mas, bpa=-8.843 degrees
! Estimated noise=0.515293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138062 Jy
! Component: 100  -  total flux cleaned = 0.185049 Jy
! Total flux subtracted in 100 components = 0.185049 Jy
! Clean residual min=-0.008240 max=0.021155 Jy/beam
! Clean residual mean=-0.000002 rms=0.002399 Jy/beam
! Combined flux in latest and established models = 0.185049 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.185049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075809Jy  sigma=1.542692
! Fit after  self-cal, rms=0.075216Jy  sigma=1.530917
! Inverting map 
! Added new window around map position (-3, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0247483 Jy
! Component: 100  -  total flux cleaned = 0.0389777 Jy
! Total flux subtracted in 100 components = 0.0389777 Jy
! Clean residual min=-0.004692 max=0.007470 Jy/beam
! Clean residual mean=-0.000003 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 0.224027 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.224027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064643Jy  sigma=1.287811
! Fit after  self-cal, rms=0.064356Jy  sigma=1.281396
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104227 Jy
! Component: 100  -  total flux cleaned = 0.0165968 Jy
! Total flux subtracted in 100 components = 0.0165968 Jy
! Clean residual min=-0.003731 max=0.004872 Jy/beam
! Clean residual mean=-0.000002 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 0.240623 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 34 components and 0.240623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062287Jy  sigma=1.232663
! Fit after  self-cal, rms=0.062195Jy  sigma=1.230449
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.468 mas, bmaj=8.575 mas, bpa=-9.055 degrees
! Estimated noise=0.35956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00642158 Jy
! Component: 100  -  total flux cleaned = 0.0105532 Jy
! Component: 150  -  total flux cleaned = 0.0135039 Jy
! Component: 200  -  total flux cleaned = 0.0156518 Jy
! Total flux subtracted in 200 components = 0.0156518 Jy
! Clean residual min=-0.003307 max=0.004254 Jy/beam
! Clean residual mean=-0.000008 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.256275 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 63 components and 0.256275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061441Jy  sigma=1.212441
! Fit after  self-cal, rms=0.061418Jy  sigma=1.211806
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.468 x 8.575 at -9.055 degrees (North through East)
! Clean map  min=-0.0031894  max=0.18089 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.93     KP        1.01     
!   LA        0.96     MK        0.99     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.05     OV        0.94     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        0.99     KP        1.02     
!   LA        0.95     MK        1.07     NL        1.06     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061418Jy  sigma=1.211806
! Fit after  self-cal, rms=0.060808Jy  sigma=1.190485
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=8.627 mas, bpa=-8.824 degrees
! Estimated noise=0.358128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148083 Jy
! Component: 100  -  total flux cleaned = -0.000411822 Jy
! Component: 150  -  total flux cleaned = -0.000634 Jy
! Component: 200  -  total flux cleaned = -0.000824104 Jy
! Total flux subtracted in 200 components = -0.000824104 Jy
! Clean residual min=-0.001959 max=0.002256 Jy/beam
! Clean residual mean=-0.000006 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.255451 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.255451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060755Jy  sigma=1.189656
! Fit after  self-cal, rms=0.060766Jy  sigma=1.189453
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060766Jy  sigma=1.189453
! Fit after  self-cal, rms=0.061204Jy  sigma=1.180164
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=8.629 mas, bpa=-8.924 degrees
! Estimated noise=0.358196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198663 Jy
! Component: 100  -  total flux cleaned = -0.000478685 Jy
! Component: 150  -  total flux cleaned = -0.000683951 Jy
! Component: 200  -  total flux cleaned = -0.000806433 Jy
! Total flux subtracted in 200 components = -0.000806433 Jy
! Clean residual min=-0.001561 max=0.001823 Jy/beam
! Clean residual mean=-0.000005 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.254644 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.254645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061187Jy  sigma=1.179747
! Fit after  self-cal, rms=0.061199Jy  sigma=1.179678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24, 124).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00060214 Jy
! Component: 100  -  total flux cleaned = 0.000351884 Jy
! Component: 150  -  total flux cleaned = 0.000181358 Jy
! Component: 200  -  total flux cleaned = 0.000150909 Jy
! Total flux subtracted in 200 components = 0.000150909 Jy
! Clean residual min=-0.001620 max=0.001587 Jy/beam
! Clean residual mean=-0.000005 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.254795 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.254795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061135Jy  sigma=1.178439
! Fit after  self-cal, rms=0.061133Jy  sigma=1.178388
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061133Jy  sigma=1.178388
! Fit after  self-cal, rms=0.061076Jy  sigma=1.178252
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.473 mas, bmaj=8.629 mas, bpa=-8.969 degrees
! Estimated noise=0.357708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162252 Jy
! Component: 100  -  total flux cleaned = -0.00021422 Jy
! Component: 150  -  total flux cleaned = -0.000261691 Jy
! Component: 200  -  total flux cleaned = -0.00034915 Jy
! Total flux subtracted in 200 components = -0.00034915 Jy
! Clean residual min=-0.001670 max=0.001510 Jy/beam
! Clean residual mean=-0.000005 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.254446 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 111 components and 0.254446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061054Jy  sigma=1.177829
! Fit after  self-cal, rms=0.061055Jy  sigma=1.177816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207184 Jy
! Component: 100  -  total flux cleaned = -0.000267285 Jy
! Component: 150  -  total flux cleaned = -0.000360488 Jy
! Component: 200  -  total flux cleaned = -0.000430041 Jy
! Total flux subtracted in 200 components = -0.000430041 Jy
! Clean residual min=-0.001676 max=0.001497 Jy/beam
! Clean residual mean=-0.000005 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.254016 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.254016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061043Jy  sigma=1.177586
! Fit after  self-cal, rms=0.061043Jy  sigma=1.177577
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061043Jy  sigma=1.177577
! Fit after  self-cal, rms=0.060984Jy  sigma=1.177541
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.449 mas, bmaj=11.66 mas, bpa=-7.553 degrees
! Estimated noise=0.433941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000545556 Jy
! Component: 100  -  total flux cleaned = -0.00079292 Jy
! Component: 150  -  total flux cleaned = -0.000865177 Jy
! Component: 200  -  total flux cleaned = -0.00090926 Jy
! Total flux subtracted in 200 components = -0.00090926 Jy
! Clean residual min=-0.001522 max=0.001664 Jy/beam
! Clean residual mean=-0.000010 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.253107 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 0.253107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060977Jy  sigma=1.177457
! Fit after  self-cal, rms=0.060977Jy  sigma=1.177448
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160594 Jy
! Component: 100  -  total flux cleaned = -0.00019002 Jy
! Component: 150  -  total flux cleaned = -0.000208077 Jy
! Component: 200  -  total flux cleaned = -0.0002253 Jy
! Total flux subtracted in 200 components = -0.0002253 Jy
! Clean residual min=-0.001513 max=0.001668 Jy/beam
! Clean residual mean=-0.000010 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.252882 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 138 components and 0.252882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060974Jy  sigma=1.177424
! Fit after  self-cal, rms=0.060974Jy  sigma=1.177422
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.47 mas, bmaj=8.634 mas, bpa=-9.018 degrees
! Estimated noise=0.357335 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.47 x 8.634 at -9.018 degrees (North through East)
! Clean map  min=-0.0016314  max=0.17998 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.816 mas, bmaj=7.874 mas, bpa=-8.708 degrees
! Estimated noise=0.511788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137424 Jy
! Component: 100  -  total flux cleaned = 0.186989 Jy
! Component: 150  -  total flux cleaned = 0.212029 Jy
! Component: 200  -  total flux cleaned = 0.226192 Jy
! Total flux subtracted in 200 components = 0.226192 Jy
! Clean residual min=-0.003301 max=0.007033 Jy/beam
! Clean residual mean=-0.000002 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.226192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.226192 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.47 mas, bmaj=8.634 mas, bpa=-9.018 degrees
! Estimated noise=0.357335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106327 Jy
! Component: 100  -  total flux cleaned = 0.0161403 Jy
! Component: 150  -  total flux cleaned = 0.0194948 Jy
! Component: 200  -  total flux cleaned = 0.0219066 Jy
! Total flux subtracted in 200 components = 0.0219066 Jy
! Clean residual min=-0.001760 max=0.002114 Jy/beam
! Clean residual mean=-0.000007 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.248098 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 57 components and 0.248098 Jy
! Inverting map 
! Added new window around map position (5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169863 Jy
! Component: 100  -  total flux cleaned = 0.0023601 Jy
! Component: 150  -  total flux cleaned = 0.00256065 Jy
! Component: 200  -  total flux cleaned = 0.00273261 Jy
! Total flux subtracted in 200 components = 0.00273261 Jy
! Clean residual min=-0.001560 max=0.001515 Jy/beam
! Clean residual mean=-0.000006 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.250831 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 77 components and 0.250831 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.449 mas, bmaj=11.66 mas, bpa=-7.553 degrees
! Estimated noise=0.433941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000963081 Jy
! Component: 100  -  total flux cleaned = 0.00115264 Jy
! Component: 150  -  total flux cleaned = 0.00130249 Jy
! Component: 200  -  total flux cleaned = 0.00132511 Jy
! Total flux subtracted in 200 components = 0.00132511 Jy
! Clean residual min=-0.001486 max=0.001643 Jy/beam
! Clean residual mean=-0.000011 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.252156 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.78876e-05 Jy
! Component: 100  -  total flux cleaned = -3.32296e-05 Jy
! Component: 150  -  total flux cleaned = -6.17511e-05 Jy
! Component: 200  -  total flux cleaned = -8.755e-05 Jy
! Total flux subtracted in 200 components = -8.755e-05 Jy
! Clean residual min=-0.001485 max=0.001681 Jy/beam
! Clean residual mean=-0.000010 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.252069 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 120 components and 0.252069 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.47 mas, bmaj=8.634 mas, bpa=-9.018 degrees
! Estimated noise=0.357335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136075 Jy
! Component: 100  -  total flux cleaned = 0.00011022 Jy
! Component: 150  -  total flux cleaned = 1.22315e-05 Jy
! Component: 200  -  total flux cleaned = -5.65091e-05 Jy
! Total flux subtracted in 200 components = -5.65091e-05 Jy
! Clean residual min=-0.001586 max=0.001419 Jy/beam
! Clean residual mean=-0.000005 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.252012 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.252012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060956Jy  sigma=1.177165
! Fit after  self-cal, rms=0.060950Jy  sigma=1.177005
wmodel J1300+1206_S_map.mod
! Writing 139 model components to file: J1300+1206_S_map.mod
wobs   J1300+1206_S_uvs.fits
! Writing UV FITS file: J1300+1206_S_uvs.fits
wwins  J1300+1206_S_map.win
! wwins: Wrote 4 windows to J1300+1206_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029398 Jy
! Component: 100  -  total flux cleaned = -0.000292953 Jy
! Component: 150  -  total flux cleaned = -0.000291949 Jy
! Component: 200  -  total flux cleaned = -0.000268282 Jy
! Component: 250  -  total flux cleaned = -0.000222324 Jy
! Component: 300  -  total flux cleaned = -0.00017733 Jy
! Component: 350  -  total flux cleaned = -8.9863e-05 Jy
! Component: 400  -  total flux cleaned = -6.91127e-05 Jy
! Component: 450  -  total flux cleaned = -0.000152978 Jy
! Component: 500  -  total flux cleaned = -0.000173202 Jy
! Component: 550  -  total flux cleaned = -0.000173017 Jy
! Component: 600  -  total flux cleaned = -0.000192884 Jy
! Component: 650  -  total flux cleaned = -0.000192825 Jy
! Component: 700  -  total flux cleaned = -0.000231116 Jy
! Component: 750  -  total flux cleaned = -0.000231028 Jy
! Component: 800  -  total flux cleaned = -0.000249761 Jy
! Component: 850  -  total flux cleaned = -0.000249807 Jy
! Component: 900  -  total flux cleaned = -0.0002135 Jy
! Component: 950  -  total flux cleaned = -0.000159957 Jy
! Component: 1000  -  total flux cleaned = -0.000107183 Jy
! Component: 1050  -  total flux cleaned = -0.000159715 Jy
! Component: 1100  -  total flux cleaned = -0.000159798 Jy
! Component: 1150  -  total flux cleaned = -7.4841e-05 Jy
! Component: 1200  -  total flux cleaned = -7.5108e-05 Jy
! Component: 1250  -  total flux cleaned = -7.48089e-05 Jy
! Component: 1300  -  total flux cleaned = -5.84018e-05 Jy
! Component: 1350  -  total flux cleaned = 6.50134e-06 Jy
! Component: 1400  -  total flux cleaned = -2.57217e-05 Jy
! Component: 1450  -  total flux cleaned = 5.91452e-06 Jy
! Component: 1500  -  total flux cleaned = 3.69585e-05 Jy
! Component: 1550  -  total flux cleaned = -4.0461e-05 Jy
! Component: 1600  -  total flux cleaned = -4.03752e-05 Jy
! Component: 1650  -  total flux cleaned = -4.03596e-05 Jy
! Component: 1700  -  total flux cleaned = -2.5127e-05 Jy
! Component: 1750  -  total flux cleaned = -2.5102e-05 Jy
! Component: 1800  -  total flux cleaned = -5.45631e-05 Jy
! Component: 1850  -  total flux cleaned = -3.99152e-05 Jy
! Component: 1900  -  total flux cleaned = -6.88681e-05 Jy
! Component: 1950  -  total flux cleaned = -9.72216e-05 Jy
! Component: 2000  -  total flux cleaned = -8.28741e-05 Jy
! Component: 2050  -  total flux cleaned = -5.4811e-05 Jy
! Component: 2100  -  total flux cleaned = -8.24042e-05 Jy
! Component: 2150  -  total flux cleaned = -9.61578e-05 Jy
! Component: 2200  -  total flux cleaned = -9.6201e-05 Jy
! Component: 2250  -  total flux cleaned = -4.24892e-05 Jy
! Component: 2300  -  total flux cleaned = -5.58083e-05 Jy
! Component: 2350  -  total flux cleaned = -5.61059e-05 Jy
! Component: 2400  -  total flux cleaned = -3.99182e-06 Jy
! Component: 2450  -  total flux cleaned = -4.28079e-05 Jy
! Component: 2500  -  total flux cleaned = 8.43697e-06 Jy
! Component: 2550  -  total flux cleaned = 2.098e-05 Jy
! Component: 2600  -  total flux cleaned = 7.12238e-05 Jy
! Component: 2650  -  total flux cleaned = 0.000133448 Jy
! Component: 2700  -  total flux cleaned = 0.000108515 Jy
! Component: 2750  -  total flux cleaned = 0.000169846 Jy
! Component: 2800  -  total flux cleaned = 0.000181982 Jy
! Component: 2850  -  total flux cleaned = 0.000181812 Jy
! Component: 2900  -  total flux cleaned = 0.000241773 Jy
! Component: 2950  -  total flux cleaned = 0.000194359 Jy
! Component: 3000  -  total flux cleaned = 0.000276757 Jy
! Component: 3050  -  total flux cleaned = 0.000218345 Jy
! Component: 3100  -  total flux cleaned = 0.000368815 Jy
! Component: 3150  -  total flux cleaned = 0.000357092 Jy
! Component: 3200  -  total flux cleaned = 0.000391191 Jy
! Component: 3250  -  total flux cleaned = 0.000447518 Jy
! Component: 3300  -  total flux cleaned = 0.00042503 Jy
! Component: 3350  -  total flux cleaned = 0.000424984 Jy
! Component: 3400  -  total flux cleaned = 0.000402908 Jy
! Component: 3450  -  total flux cleaned = 0.000435919 Jy
! Component: 3500  -  total flux cleaned = 0.000490553 Jy
! Component: 3550  -  total flux cleaned = 0.0005014 Jy
! Component: 3600  -  total flux cleaned = 0.00051208 Jy
! Component: 3650  -  total flux cleaned = 0.000533432 Jy
! Component: 3700  -  total flux cleaned = 0.000618196 Jy
! Component: 3750  -  total flux cleaned = 0.000670767 Jy
! Component: 3800  -  total flux cleaned = 0.000681237 Jy
! Component: 3850  -  total flux cleaned = 0.000733107 Jy
! Component: 3900  -  total flux cleaned = 0.00078454 Jy
! Component: 3950  -  total flux cleaned = 0.000805033 Jy
! Component: 4000  -  total flux cleaned = 0.000835426 Jy
! Component: 4050  -  total flux cleaned = 0.000875806 Jy
! Total flux subtracted in 4096 components = 0.000875701 Jy
! Clean residual min=-0.000701 max=0.000659 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.252888 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 455 components and 0.252888 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1300+1206_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.47 x 8.634 at -9.018 degrees (North through East)
! Clean map  min=-0.0013746  max=0.1804 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1300+1206_S_map.fits
wmodel /vlbi/uf001/uva//J1300+1206_S_map.mod
! Writing 455 model components to file: /vlbi/uf001/uva//J1300+1206_S_map.mod
wobs   /vlbi/uf001/uva//J1300+1206_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1300+1206_S_uvs.fits
wwins  /vlbi/uf001/uva//J1300+1206_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1300+1206_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.180404 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000185051 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.307729 0.307729 0.615458 1.23092 2.46183 4.92366 9.84732 19.6946 39.3893 78.7786
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.18 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  974.884 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1300+1206_S_dfm.log closed on Mon Jan 14 02:08:52 2019