! Started logfile: /vlbi/uf001/uva//J1258-2219_S_dfm.log on Mon Jan 14 02:07:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1258-2219_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1258-2219_S_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.953968 visibilities/baseline/integration-bin.
! Found source: J1258-2219
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3606 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1258-2219_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.280843Jy  sigma=17.268485
! Fit after  self-cal, rms=0.284082Jy  sigma=3.853819
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.499 mas, bmaj=6.586 mas, bpa=-3.556 degrees
! Estimated noise=1.16519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.572036 Jy
! Component: 100  -  total flux cleaned = 0.706769 Jy
! Total flux subtracted in 100 components = 0.706769 Jy
! Clean residual min=-0.022425 max=0.054543 Jy/beam
! Clean residual mean=-0.000162 rms=0.007746 Jy/beam
! Combined flux in latest and established models = 0.706769 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.706769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166857Jy  sigma=2.181254
! Fit after  self-cal, rms=0.166764Jy  sigma=2.180196
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0599744 Jy
! Component: 100  -  total flux cleaned = 0.0933497 Jy
! Total flux subtracted in 100 components = 0.0933497 Jy
! Clean residual min=-0.018974 max=0.036407 Jy/beam
! Clean residual mean=-0.000112 rms=0.005871 Jy/beam
! Combined flux in latest and established models = 0.800119 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 30 components and 0.800119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132364Jy  sigma=1.712127
! Fit after  self-cal, rms=0.132308Jy  sigma=1.711503
! Inverting map 
! Added new window around map position (6, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.038569 Jy
! Component: 100  -  total flux cleaned = 0.0625762 Jy
! Total flux subtracted in 100 components = 0.0625762 Jy
! Clean residual min=-0.017886 max=0.031830 Jy/beam
! Clean residual mean=-0.000076 rms=0.004936 Jy/beam
! Combined flux in latest and established models = 0.862695 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.862695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115143Jy  sigma=1.494853
! Fit after  self-cal, rms=0.114041Jy  sigma=1.477352
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=7.534 mas, bpa=-2.832 degrees
! Estimated noise=0.95437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38, 61).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322711 Jy
! Component: 100  -  total flux cleaned = 0.0531633 Jy
! Component: 150  -  total flux cleaned = 0.0684672 Jy
! Component: 200  -  total flux cleaned = 0.0798719 Jy
! Total flux subtracted in 200 components = 0.0798719 Jy
! Clean residual min=-0.015156 max=0.020017 Jy/beam
! Clean residual mean=-0.000067 rms=0.003939 Jy/beam
! Combined flux in latest and established models = 0.942567 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 83 components and 0.942567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101843Jy  sigma=1.324538
! Fit after  self-cal, rms=0.100949Jy  sigma=1.311327
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.936 x 7.534 at -2.832 degrees (North through East)
! Clean map  min=-0.015249  max=0.73526 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.12     KP        1.01     
!   LA        0.96     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.14     KP        1.04     
!   LA        0.97     MK        0.97     NL        1.01     OV        0.96     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.12     KP        1.02     
!   LA        0.96     MK        1.06     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.100949Jy  sigma=1.311327
! Fit after  self-cal, rms=0.089782Jy  sigma=1.149154
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=7.539 mas, bpa=-2.623 degrees
! Estimated noise=0.956068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00246733 Jy
! Component: 100  -  total flux cleaned = -0.00273571 Jy
! Component: 150  -  total flux cleaned = -0.00319005 Jy
! Component: 200  -  total flux cleaned = -0.00355684 Jy
! Total flux subtracted in 200 components = -0.00355684 Jy
! Clean residual min=-0.009591 max=0.009225 Jy/beam
! Clean residual mean=-0.000014 rms=0.002353 Jy/beam
! Combined flux in latest and established models = 0.93901 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.93901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088558Jy  sigma=1.132443
! Fit after  self-cal, rms=0.088553Jy  sigma=1.132061
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088553Jy  sigma=1.132061
! Fit after  self-cal, rms=0.084847Jy  sigma=1.082459
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.542 mas, bpa=-2.681 degrees
! Estimated noise=0.957028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00272244 Jy
! Component: 100  -  total flux cleaned = -0.00337631 Jy
! Component: 150  -  total flux cleaned = -0.00406032 Jy
! Component: 200  -  total flux cleaned = -0.00453819 Jy
! Total flux subtracted in 200 components = -0.00453819 Jy
! Clean residual min=-0.006874 max=0.007842 Jy/beam
! Clean residual mean=-0.000022 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 0.934472 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 117 components and 0.934472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084284Jy  sigma=1.075009
! Fit after  self-cal, rms=0.084265Jy  sigma=1.074731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00796287 Jy
! Component: 100  -  total flux cleaned = 0.0110925 Jy
! Component: 150  -  total flux cleaned = 0.0116772 Jy
! Component: 200  -  total flux cleaned = 0.0120768 Jy
! Total flux subtracted in 200 components = 0.0120768 Jy
! Clean residual min=-0.005884 max=0.005542 Jy/beam
! Clean residual mean=-0.000007 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.946549 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 147 components and 0.946549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083349Jy  sigma=1.062476
! Fit after  self-cal, rms=0.083319Jy  sigma=1.062103
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083319Jy  sigma=1.062103
! Fit after  self-cal, rms=0.083238Jy  sigma=1.059049
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.536 mas, bpa=-2.656 degrees
! Estimated noise=0.955298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00243138 Jy
! Component: 100  -  total flux cleaned = -0.0023029 Jy
! Component: 150  -  total flux cleaned = -0.00218884 Jy
! Component: 200  -  total flux cleaned = -0.00219273 Jy
! Total flux subtracted in 200 components = -0.00219273 Jy
! Clean residual min=-0.005475 max=0.004664 Jy/beam
! Clean residual mean=-0.000004 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.944356 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 171 components and 0.944356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082868Jy  sigma=1.054094
! Fit after  self-cal, rms=0.082847Jy  sigma=1.053837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000366189 Jy
! Component: 100  -  total flux cleaned = -0.000461404 Jy
! Component: 150  -  total flux cleaned = -0.000554137 Jy
! Component: 200  -  total flux cleaned = -0.0006405 Jy
! Total flux subtracted in 200 components = -0.0006405 Jy
! Clean residual min=-0.005229 max=0.004596 Jy/beam
! Clean residual mean=-0.000004 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.943716 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 181 components and 0.943715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082666Jy  sigma=1.051213
! Fit after  self-cal, rms=0.082655Jy  sigma=1.051114
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082655Jy  sigma=1.051114
! Fit after  self-cal, rms=0.082685Jy  sigma=1.050301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.329 mas, bmaj=16.51 mas, bpa=2.463 degrees
! Estimated noise=1.29113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000969224 Jy
! Component: 100  -  total flux cleaned = -0.00119113 Jy
! Component: 150  -  total flux cleaned = -0.00127787 Jy
! Component: 200  -  total flux cleaned = -0.00135364 Jy
! Total flux subtracted in 200 components = -0.00135364 Jy
! Clean residual min=-0.005147 max=0.005210 Jy/beam
! Clean residual mean=0.000005 rms=0.001536 Jy/beam
! Combined flux in latest and established models = 0.942362 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 205 components and 0.942362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082555Jy  sigma=1.048531
! Fit after  self-cal, rms=0.082516Jy  sigma=1.048151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000480493 Jy
! Component: 100  -  total flux cleaned = -0.000409403 Jy
! Component: 150  -  total flux cleaned = -0.000413244 Jy
! Component: 200  -  total flux cleaned = -0.000461159 Jy
! Total flux subtracted in 200 components = -0.000461159 Jy
! Clean residual min=-0.004902 max=0.005072 Jy/beam
! Clean residual mean=0.000006 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.9419 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 219 components and 0.941901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082487Jy  sigma=1.047442
! Fit after  self-cal, rms=0.082456Jy  sigma=1.047202
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=7.533 mas, bpa=-2.643 degrees
! Estimated noise=0.954252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.954 x 7.533 at -2.643 degrees (North through East)
! Clean map  min=-0.0046556  max=0.73749 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082456Jy  sigma=1.047202
! Fit after  self-cal, rms=0.078080Jy  sigma=0.977677
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=7.535 mas, bpa=-2.639 degrees
! Estimated noise=0.954227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199969 Jy
! Component: 100  -  total flux cleaned = -0.00235395 Jy
! Component: 150  -  total flux cleaned = -0.00274002 Jy
! Component: 200  -  total flux cleaned = -0.00301574 Jy
! Total flux subtracted in 200 components = -0.00301574 Jy
! Clean residual min=-0.004410 max=0.004093 Jy/beam
! Clean residual mean=-0.000002 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.938885 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 230 components and 0.938885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077914Jy  sigma=0.975312
! Fit after  self-cal, rms=0.077903Jy  sigma=0.975206
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434402 Jy
! Component: 100  -  total flux cleaned = -0.000814548 Jy
! Component: 150  -  total flux cleaned = -0.00104814 Jy
! Component: 200  -  total flux cleaned = -0.00121197 Jy
! Total flux subtracted in 200 components = -0.00121197 Jy
! Clean residual min=-0.004159 max=0.003991 Jy/beam
! Clean residual mean=-0.000003 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.937673 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 238 components and 0.937673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077822Jy  sigma=0.974015
! Fit after  self-cal, rms=0.077818Jy  sigma=0.973975
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077818Jy  sigma=0.973975
! Fit after  self-cal, rms=0.077857Jy  sigma=0.973543
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.51 mas, bmaj=6.564 mas, bpa=-3.29 degrees
! Estimated noise=1.16759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.573043 Jy
! Component: 100  -  total flux cleaned = 0.708562 Jy
! Component: 150  -  total flux cleaned = 0.767211 Jy
! Component: 200  -  total flux cleaned = 0.802606 Jy
! Total flux subtracted in 200 components = 0.802606 Jy
! Clean residual min=-0.009939 max=0.020123 Jy/beam
! Clean residual mean=-0.000080 rms=0.002996 Jy/beam
! Combined flux in latest and established models = 0.802606 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.802606 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=7.533 mas, bpa=-2.636 degrees
! Estimated noise=0.953714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360838 Jy
! Component: 100  -  total flux cleaned = 0.05868 Jy
! Component: 150  -  total flux cleaned = 0.073945 Jy
! Component: 200  -  total flux cleaned = 0.085298 Jy
! Total flux subtracted in 200 components = 0.085298 Jy
! Clean residual min=-0.005890 max=0.006956 Jy/beam
! Clean residual mean=-0.000054 rms=0.001673 Jy/beam
! Combined flux in latest and established models = 0.887904 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 95 components and 0.887904 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.341 mas, bmaj=16.53 mas, bpa=2.429 degrees
! Estimated noise=1.2895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157152 Jy
! Component: 100  -  total flux cleaned = 0.0254509 Jy
! Component: 150  -  total flux cleaned = 0.0319863 Jy
! Component: 200  -  total flux cleaned = 0.0365696 Jy
! Total flux subtracted in 200 components = 0.0365696 Jy
! Clean residual min=-0.005781 max=0.005723 Jy/beam
! Clean residual mean=-0.000026 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.924473 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00331831 Jy
! Component: 100  -  total flux cleaned = 0.00574565 Jy
! Component: 150  -  total flux cleaned = 0.00695912 Jy
! Component: 200  -  total flux cleaned = 0.00772896 Jy
! Total flux subtracted in 200 components = 0.00772896 Jy
! Clean residual min=-0.005197 max=0.005086 Jy/beam
! Clean residual mean=-0.000007 rms=0.001399 Jy/beam
! Combined flux in latest and established models = 0.932202 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 193 components and 0.932202 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=7.533 mas, bpa=-2.636 degrees
! Estimated noise=0.953714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289007 Jy
! Component: 100  -  total flux cleaned = 0.00049199 Jy
! Component: 150  -  total flux cleaned = 0.000852088 Jy
! Component: 200  -  total flux cleaned = 0.000935052 Jy
! Total flux subtracted in 200 components = 0.000935052 Jy
! Clean residual min=-0.004037 max=0.005035 Jy/beam
! Clean residual mean=-0.000004 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.933137 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 214 components and 0.933137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077953Jy  sigma=0.973924
! Fit after  self-cal, rms=0.077851Jy  sigma=0.972827
wmodel J1258-2219_S_map.mod
! Writing 214 model components to file: J1258-2219_S_map.mod
wobs   J1258-2219_S_uvs.fits
! Writing UV FITS file: J1258-2219_S_uvs.fits
wwins  J1258-2219_S_map.win
! wwins: Wrote 5 windows to J1258-2219_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102244 Jy
! Component: 100  -  total flux cleaned = 0.000554487 Jy
! Component: 150  -  total flux cleaned = 0.000305344 Jy
! Component: 200  -  total flux cleaned = 6.75631e-05 Jy
! Component: 250  -  total flux cleaned = -4.53021e-05 Jy
! Component: 300  -  total flux cleaned = -0.000100585 Jy
! Component: 350  -  total flux cleaned = -0.000155427 Jy
! Component: 400  -  total flux cleaned = -0.000262302 Jy
! Component: 450  -  total flux cleaned = -0.000313825 Jy
! Component: 500  -  total flux cleaned = -0.000363059 Jy
! Component: 550  -  total flux cleaned = -0.00031366 Jy
! Component: 600  -  total flux cleaned = -0.000266513 Jy
! Component: 650  -  total flux cleaned = -0.000267362 Jy
! Component: 700  -  total flux cleaned = -0.000222615 Jy
! Component: 750  -  total flux cleaned = -0.000358914 Jy
! Component: 800  -  total flux cleaned = -0.00035905 Jy
! Component: 850  -  total flux cleaned = -0.000272412 Jy
! Component: 900  -  total flux cleaned = -0.0002722 Jy
! Component: 950  -  total flux cleaned = -0.000230593 Jy
! Component: 1000  -  total flux cleaned = -0.000352176 Jy
! Component: 1050  -  total flux cleaned = -0.000431666 Jy
! Component: 1100  -  total flux cleaned = -0.000431852 Jy
! Component: 1150  -  total flux cleaned = -0.000431623 Jy
! Component: 1200  -  total flux cleaned = -0.000354622 Jy
! Component: 1250  -  total flux cleaned = -0.000279494 Jy
! Component: 1300  -  total flux cleaned = -0.00042884 Jy
! Component: 1350  -  total flux cleaned = -0.000465677 Jy
! Component: 1400  -  total flux cleaned = -0.000357331 Jy
! Component: 1450  -  total flux cleaned = -0.000357027 Jy
! Component: 1500  -  total flux cleaned = -0.000286431 Jy
! Component: 1550  -  total flux cleaned = -0.000112815 Jy
! Component: 1600  -  total flux cleaned = -1.06814e-05 Jy
! Component: 1650  -  total flux cleaned = 5.70188e-05 Jy
! Component: 1700  -  total flux cleaned = 5.62118e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000121817 Jy
! Component: 1800  -  total flux cleaned = 8.96757e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000219214 Jy
! Component: 1900  -  total flux cleaned = 0.000410318 Jy
! Component: 1950  -  total flux cleaned = 0.000253695 Jy
! Component: 2000  -  total flux cleaned = 0.000409302 Jy
! Component: 2050  -  total flux cleaned = 0.000409764 Jy
! Component: 2100  -  total flux cleaned = 0.000500048 Jy
! Component: 2150  -  total flux cleaned = 0.00053029 Jy
! Component: 2200  -  total flux cleaned = 0.000560164 Jy
! Component: 2250  -  total flux cleaned = 0.000618966 Jy
! Component: 2300  -  total flux cleaned = 0.000647874 Jy
! Component: 2350  -  total flux cleaned = 0.00064807 Jy
! Component: 2400  -  total flux cleaned = 0.00064832 Jy
! Component: 2450  -  total flux cleaned = 0.000620938 Jy
! Component: 2500  -  total flux cleaned = 0.000759404 Jy
! Component: 2550  -  total flux cleaned = 0.000759075 Jy
! Component: 2600  -  total flux cleaned = 0.000785924 Jy
! Component: 2650  -  total flux cleaned = 0.00067869 Jy
! Component: 2700  -  total flux cleaned = 0.000704937 Jy
! Component: 2750  -  total flux cleaned = 0.000652711 Jy
! Component: 2800  -  total flux cleaned = 0.000678206 Jy
! Component: 2850  -  total flux cleaned = 0.000601216 Jy
! Component: 2900  -  total flux cleaned = 0.000448872 Jy
! Component: 2950  -  total flux cleaned = 0.000524835 Jy
! Component: 3000  -  total flux cleaned = 0.0003998 Jy
! Component: 3050  -  total flux cleaned = 0.000375705 Jy
! Component: 3100  -  total flux cleaned = 0.000424537 Jy
! Component: 3150  -  total flux cleaned = 0.000376066 Jy
! Component: 3200  -  total flux cleaned = 0.000279991 Jy
! Component: 3250  -  total flux cleaned = 0.000351124 Jy
! Component: 3300  -  total flux cleaned = 0.000351041 Jy
! Component: 3350  -  total flux cleaned = 0.000304 Jy
! Component: 3400  -  total flux cleaned = 0.000188122 Jy
! Component: 3450  -  total flux cleaned = 0.000211288 Jy
! Component: 3500  -  total flux cleaned = 0.000210914 Jy
! Component: 3550  -  total flux cleaned = 0.000188042 Jy
! Component: 3600  -  total flux cleaned = 0.000277064 Jy
! Component: 3650  -  total flux cleaned = 0.000188455 Jy
! Component: 3700  -  total flux cleaned = 0.00027627 Jy
! Component: 3750  -  total flux cleaned = 0.000297552 Jy
! Component: 3800  -  total flux cleaned = 0.00025454 Jy
! Component: 3850  -  total flux cleaned = 0.000211746 Jy
! Component: 3900  -  total flux cleaned = 0.000275289 Jy
! Component: 3950  -  total flux cleaned = 0.000296391 Jy
! Component: 4000  -  total flux cleaned = 0.000275828 Jy
! Component: 4050  -  total flux cleaned = 0.000296621 Jy
! Total flux subtracted in 4096 components = 0.000358353 Jy
! Clean residual min=-0.001115 max=0.001761 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.933496 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 518 components and 0.933496 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1258-2219_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.953 x 7.533 at -2.636 degrees (North through East)
! Clean map  min=-0.0024818  max=0.74222 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1258-2219_S_map.fits
wmodel /vlbi/uf001/uva//J1258-2219_S_map.mod
! Writing 518 model components to file: /vlbi/uf001/uva//J1258-2219_S_map.mod
wobs   /vlbi/uf001/uva//J1258-2219_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1258-2219_S_uvs.fits
wwins  /vlbi/uf001/uva//J1258-2219_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1258-2219_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.742223 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000373686 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.15104 0.15104 0.302081 0.604162 1.20832 2.41665 4.83329 9.66659 19.3332 38.6663 77.3327
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.742 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1986.22 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1258-2219_S_dfm.log closed on Mon Jan 14 02:07:49 2019