! Started logfile: /vlbi/uf001/uva//J1254+0859_X_dfm.log on Mon Jan 14 02:05:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1254+0859_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1254+0859_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.989198 visibilities/baseline/integration-bin. ! Found source: J1254+0859 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38460 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1254+0859_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011611Jy sigma=23.246682 ! Fit after self-cal, rms=0.920697Jy sigma=21.042983 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6903 mas, bmaj=1.672 mas, bpa=-2.151 degrees ! Estimated noise=0.30069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0610729 Jy ! Component: 100 - total flux cleaned = 0.0783253 Jy ! Total flux subtracted in 100 components = 0.0783253 Jy ! Clean residual min=-0.012855 max=0.034494 Jy/beam ! Clean residual mean=-0.000003 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.0783253 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0783253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099759Jy sigma=2.159683 ! Fit after self-cal, rms=0.098724Jy sigma=2.136488 ! Inverting map ! Added new window around map position (8.8, -26). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297708 Jy ! Component: 100 - total flux cleaned = 0.0423858 Jy ! Total flux subtracted in 100 components = 0.0423858 Jy ! Clean residual min=-0.008113 max=0.024776 Jy/beam ! Clean residual mean=-0.000003 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.120711 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.120711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088936Jy sigma=1.876106 ! Fit after self-cal, rms=0.082287Jy sigma=1.720810 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225571 Jy ! Component: 100 - total flux cleaned = 0.0320481 Jy ! Total flux subtracted in 100 components = 0.0320481 Jy ! Clean residual min=-0.006132 max=0.010376 Jy/beam ! Clean residual mean=-0.000003 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.152759 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.152759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075070Jy sigma=1.516860 ! Fit after self-cal, rms=0.073744Jy sigma=1.486281 ! Inverting map ! Added new window around map position (7.8, -23.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121749 Jy ! Component: 100 - total flux cleaned = 0.0198003 Jy ! Total flux subtracted in 100 components = 0.0198003 Jy ! Clean residual min=-0.004741 max=0.009099 Jy/beam ! Clean residual mean=-0.000003 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.172559 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.172559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070878Jy sigma=1.400675 ! Fit after self-cal, rms=0.070604Jy sigma=1.393182 ! Inverting map ! Added new window around map position (1.2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853857 Jy ! Component: 100 - total flux cleaned = 0.0152601 Jy ! Total flux subtracted in 100 components = 0.0152601 Jy ! Clean residual min=-0.003998 max=0.006460 Jy/beam ! Clean residual mean=-0.000002 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.18782 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.18782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068790Jy sigma=1.337984 ! Fit after self-cal, rms=0.068757Jy sigma=1.337258 ! Inverting map ! Added new window around map position (2.2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655958 Jy ! Component: 100 - total flux cleaned = 0.0117546 Jy ! Total flux subtracted in 100 components = 0.0117546 Jy ! Clean residual min=-0.003445 max=0.004950 Jy/beam ! Clean residual mean=-0.000002 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.199574 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.199574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067690Jy sigma=1.305332 ! Fit after self-cal, rms=0.067673Jy sigma=1.304888 ! Inverting map ! Added new window around map position (0.2, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051573 Jy ! Component: 100 - total flux cleaned = 0.0093795 Jy ! Total flux subtracted in 100 components = 0.0093795 Jy ! Clean residual min=-0.003088 max=0.003298 Jy/beam ! Clean residual mean=-0.000002 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.208954 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.208954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066988Jy sigma=1.283875 ! Fit after self-cal, rms=0.066986Jy sigma=1.283691 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8708 mas, bmaj=1.975 mas, bpa=-2 degrees ! Estimated noise=0.161495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669081 Jy ! Component: 100 - total flux cleaned = 0.0120262 Jy ! Component: 150 - total flux cleaned = 0.0165361 Jy ! Component: 200 - total flux cleaned = 0.0203999 Jy ! Total flux subtracted in 200 components = 0.0203999 Jy ! Clean residual min=-0.002927 max=0.003812 Jy/beam ! Clean residual mean=-0.000002 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.229354 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 107 components and 0.229354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065996Jy sigma=1.252367 ! Fit after self-cal, rms=0.065986Jy sigma=1.252044 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8708 x 1.975 at -2 degrees (North through East) ! Clean map min=-0.0028742 max=0.080042 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.00 KP 0.95 ! LA 0.96 MK 1.02 NL 1.00 OV 0.91 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.94 KP 0.97 ! LA 0.94 MK 1.04 NL 0.97 OV 0.93 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.97 KP 0.97 ! LA 0.95 MK 0.99 NL 0.99 OV 0.91 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.95 KP 0.99 ! LA 0.96 MK 1.04 NL 0.97 OV 0.94 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.99 KP 0.96 ! LA 0.94 MK 1.03 NL 0.99 OV 0.92 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.95 KP 0.99 ! LA 0.95 MK 1.02 NL 0.98 OV 0.95 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.98 KP 0.97 ! LA 0.96 MK 1.06 NL 0.99 OV 0.93 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.97 KP 1.01 ! LA 0.96 MK 1.07 NL 0.99 OV 0.94 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.99 KP 0.98 ! LA 0.95 MK 1.05 NL 0.99 OV 0.96 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.96 KP 1.00 ! LA 0.96 MK 1.05 NL 1.00 OV 0.95 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.97 KP 1.01 ! LA 0.96 MK 1.02 NL 0.98 OV 0.95 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.97 KP 1.01 ! LA 0.95 MK 0.97 NL 1.01 OV 0.95 ! PT 0.93 SC 1.04 ! ! ! Fit before self-cal, rms=0.065986Jy sigma=1.252044 ! Fit after self-cal, rms=0.064089Jy sigma=1.236305 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8822 mas, bmaj=2.01 mas, bpa=-2.04 degrees ! Estimated noise=0.15745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.4, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349177 Jy ! Component: 100 - total flux cleaned = 0.00563315 Jy ! Component: 150 - total flux cleaned = 0.0070237 Jy ! Component: 200 - total flux cleaned = 0.00818253 Jy ! Total flux subtracted in 200 components = 0.00818253 Jy ! Clean residual min=-0.001964 max=0.002634 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.237536 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 145 components and 0.237536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063869Jy sigma=1.229655 ! Fit after self-cal, rms=0.063875Jy sigma=1.229294 ! Inverting map ! Added new window around map position (-5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210796 Jy ! Component: 100 - total flux cleaned = 0.00290806 Jy ! Component: 150 - total flux cleaned = 0.00357846 Jy ! Component: 200 - total flux cleaned = 0.00413984 Jy ! Total flux subtracted in 200 components = 0.00413984 Jy ! Clean residual min=-0.001759 max=0.002406 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.241676 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 165 components and 0.241676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063760Jy sigma=1.226701 ! Fit after self-cal, rms=0.063753Jy sigma=1.226528 ! Inverting map ! Added new window around map position (2.2, -27.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219205 Jy ! Component: 100 - total flux cleaned = 0.00343408 Jy ! Component: 150 - total flux cleaned = 0.00425831 Jy ! Component: 200 - total flux cleaned = 0.00484813 Jy ! Total flux subtracted in 200 components = 0.00484813 Jy ! Clean residual min=-0.001607 max=0.001898 Jy/beam ! Clean residual mean=-0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.246524 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 193 components and 0.246524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063654Jy sigma=1.224173 ! Fit after self-cal, rms=0.063646Jy sigma=1.224008 ! Inverting map ! Added new window around map position (8.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193179 Jy ! Component: 100 - total flux cleaned = 0.00309817 Jy ! Component: 150 - total flux cleaned = 0.00405349 Jy ! Component: 200 - total flux cleaned = 0.00470812 Jy ! Total flux subtracted in 200 components = 0.00470812 Jy ! Clean residual min=-0.001486 max=0.001555 Jy/beam ! Clean residual mean=-0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.251232 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 217 components and 0.251232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063562Jy sigma=1.222183 ! Fit after self-cal, rms=0.063558Jy sigma=1.222044 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063558Jy sigma=1.222044 ! Fit after self-cal, rms=0.067224Jy sigma=1.216365 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8822 mas, bmaj=2.011 mas, bpa=-2.145 degrees ! Estimated noise=0.157544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662913 Jy ! Component: 100 - total flux cleaned = 0.00137934 Jy ! Component: 150 - total flux cleaned = 0.00191407 Jy ! Component: 200 - total flux cleaned = 0.00250133 Jy ! Total flux subtracted in 200 components = 0.00250133 Jy ! Clean residual min=-0.001185 max=0.001398 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.253734 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 236 components and 0.253733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067186Jy sigma=1.215213 ! Fit after self-cal, rms=0.067218Jy sigma=1.215132 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882943 Jy ! Component: 100 - total flux cleaned = 0.0014466 Jy ! Component: 150 - total flux cleaned = 0.00183847 Jy ! Component: 200 - total flux cleaned = 0.00220535 Jy ! Total flux subtracted in 200 components = 0.00220535 Jy ! Clean residual min=-0.001101 max=0.001294 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.255939 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 254 components and 0.255939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067179Jy sigma=1.214203 ! Fit after self-cal, rms=0.067180Jy sigma=1.214172 ! Inverting map ! Added new window around map position (3.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107969 Jy ! Component: 100 - total flux cleaned = 0.00166882 Jy ! Component: 150 - total flux cleaned = 0.00211385 Jy ! Component: 200 - total flux cleaned = 0.00253388 Jy ! Total flux subtracted in 200 components = 0.00253388 Jy ! Clean residual min=-0.001040 max=0.001056 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.258473 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 269 components and 0.258473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067150Jy sigma=1.213436 ! Fit after self-cal, rms=0.067150Jy sigma=1.213411 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067150Jy sigma=1.213411 ! Fit after self-cal, rms=0.068052Jy sigma=1.213077 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.882 mas, bmaj=2.011 mas, bpa=-2.199 degrees ! Estimated noise=0.157525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451064 Jy ! Component: 100 - total flux cleaned = 0.000709908 Jy ! Component: 150 - total flux cleaned = 0.000927295 Jy ! Component: 200 - total flux cleaned = 0.00113404 Jy ! Total flux subtracted in 200 components = 0.00113404 Jy ! Clean residual min=-0.000958 max=0.001026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.259607 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 280 components and 0.259607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068034Jy sigma=1.212609 ! Fit after self-cal, rms=0.068042Jy sigma=1.212595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.6, -47.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585908 Jy ! Component: 100 - total flux cleaned = 0.000822081 Jy ! Component: 150 - total flux cleaned = 0.000998073 Jy ! Component: 200 - total flux cleaned = 0.00118845 Jy ! Total flux subtracted in 200 components = 0.00118845 Jy ! Clean residual min=-0.000968 max=0.000878 Jy/beam ! Clean residual mean=-0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.260795 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 302 components and 0.260795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068024Jy sigma=1.212090 ! Fit after self-cal, rms=0.068024Jy sigma=1.212080 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068024Jy sigma=1.212080 ! Fit after self-cal, rms=0.068153Jy sigma=1.212049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.143 mas, bpa=-0.7358 degrees ! Estimated noise=0.191074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869089 Jy ! Component: 100 - total flux cleaned = 0.00146666 Jy ! Component: 150 - total flux cleaned = 0.00188587 Jy ! Component: 200 - total flux cleaned = 0.00220987 Jy ! Total flux subtracted in 200 components = 0.00220987 Jy ! Clean residual min=-0.001082 max=0.000976 Jy/beam ! Clean residual mean=-0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.263005 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 322 components and 0.263005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068145Jy sigma=1.211790 ! Fit after self-cal, rms=0.068147Jy sigma=1.211779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217263 Jy ! Component: 100 - total flux cleaned = 0.000454026 Jy ! Component: 150 - total flux cleaned = 0.000715949 Jy ! Component: 200 - total flux cleaned = 0.000947714 Jy ! Total flux subtracted in 200 components = 0.000947714 Jy ! Clean residual min=-0.001050 max=0.000944 Jy/beam ! Clean residual mean=-0.000000 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.263953 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 340 components and 0.263953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068141Jy sigma=1.211646 ! Fit after self-cal, rms=0.068141Jy sigma=1.211644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8819 mas, bmaj=2.011 mas, bpa=-2.233 degrees ! Estimated noise=0.157434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8819 x 2.011 at -2.233 degrees (North through East) ! Clean map min=-0.00082603 max=0.078387 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6952 mas, bmaj=1.693 mas, bpa=-2.415 degrees ! Estimated noise=0.296793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722957 Jy ! Component: 100 - total flux cleaned = 0.108169 Jy ! Component: 150 - total flux cleaned = 0.127877 Jy ! Component: 200 - total flux cleaned = 0.141357 Jy ! Total flux subtracted in 200 components = 0.141357 Jy ! Clean residual min=-0.005112 max=0.007873 Jy/beam ! Clean residual mean=-0.000004 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.141357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.141357 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8819 mas, bmaj=2.011 mas, bpa=-2.233 degrees ! Estimated noise=0.157434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016779 Jy ! Component: 100 - total flux cleaned = 0.0297491 Jy ! Component: 150 - total flux cleaned = 0.0402216 Jy ! Component: 200 - total flux cleaned = 0.0488414 Jy ! Total flux subtracted in 200 components = 0.0488414 Jy ! Clean residual min=-0.003910 max=0.005245 Jy/beam ! Clean residual mean=-0.000004 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.190198 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 75 components and 0.190198 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725171 Jy ! Component: 100 - total flux cleaned = 0.0134355 Jy ! Component: 150 - total flux cleaned = 0.0187307 Jy ! Component: 200 - total flux cleaned = 0.0232885 Jy ! Total flux subtracted in 200 components = 0.0232885 Jy ! Clean residual min=-0.002612 max=0.002872 Jy/beam ! Clean residual mean=-0.000002 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.213487 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 105 components and 0.213487 Jy ! Inverting map ! Added new window around map position (8, -25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395033 Jy ! Component: 100 - total flux cleaned = 0.00738673 Jy ! Component: 150 - total flux cleaned = 0.0104266 Jy ! Component: 200 - total flux cleaned = 0.0131309 Jy ! Total flux subtracted in 200 components = 0.0131309 Jy ! Clean residual min=-0.001880 max=0.001793 Jy/beam ! Clean residual mean=-0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.226618 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 137 components and 0.226618 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.143 mas, bpa=-0.7358 degrees ! Estimated noise=0.191074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409252 Jy ! Component: 100 - total flux cleaned = 0.00737967 Jy ! Component: 150 - total flux cleaned = 0.010183 Jy ! Component: 200 - total flux cleaned = 0.0126239 Jy ! Total flux subtracted in 200 components = 0.0126239 Jy ! Clean residual min=-0.002151 max=0.001893 Jy/beam ! Clean residual mean=-0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.239242 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215489 Jy ! Component: 100 - total flux cleaned = 0.00407461 Jy ! Component: 150 - total flux cleaned = 0.00580105 Jy ! Component: 200 - total flux cleaned = 0.00736403 Jy ! Total flux subtracted in 200 components = 0.00736403 Jy ! Clean residual min=-0.001785 max=0.001538 Jy/beam ! Clean residual mean=-0.000002 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.246606 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 225 components and 0.246606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8819 mas, bmaj=2.011 mas, bpa=-2.233 degrees ! Estimated noise=0.157434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151918 Jy ! Component: 100 - total flux cleaned = 0.00280317 Jy ! Component: 150 - total flux cleaned = 0.00387919 Jy ! Component: 200 - total flux cleaned = 0.00482578 Jy ! Total flux subtracted in 200 components = 0.00482578 Jy ! Clean residual min=-0.001066 max=0.001111 Jy/beam ! Clean residual mean=-0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.251432 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 256 components and 0.251432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068252Jy sigma=1.213959 ! Fit after self-cal, rms=0.068221Jy sigma=1.213764 wmodel J1254+0859_X_map.mod ! Writing 256 model components to file: J1254+0859_X_map.mod wobs J1254+0859_X_uvs.fits ! Writing UV FITS file: J1254+0859_X_uvs.fits wwins J1254+0859_X_map.win ! wwins: Wrote 14 windows to J1254+0859_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.08658e-05 Jy ! Component: 100 - total flux cleaned = 5.77767e-05 Jy ! Component: 150 - total flux cleaned = 0.000146155 Jy ! Component: 200 - total flux cleaned = 0.000249143 Jy ! Component: 250 - total flux cleaned = 0.000399202 Jy ! Component: 300 - total flux cleaned = 0.000496568 Jy ! Component: 350 - total flux cleaned = 0.000591466 Jy ! Component: 400 - total flux cleaned = 0.000622326 Jy ! Component: 450 - total flux cleaned = 0.000698053 Jy ! Component: 500 - total flux cleaned = 0.000742603 Jy ! Component: 550 - total flux cleaned = 0.000786492 Jy ! Component: 600 - total flux cleaned = 0.000858562 Jy ! Component: 650 - total flux cleaned = 0.000886947 Jy ! Component: 700 - total flux cleaned = 0.000970895 Jy ! Component: 750 - total flux cleaned = 0.000998328 Jy ! Component: 800 - total flux cleaned = 0.00105274 Jy ! Component: 850 - total flux cleaned = 0.00105285 Jy ! Component: 900 - total flux cleaned = 0.00109267 Jy ! Component: 950 - total flux cleaned = 0.00117121 Jy ! Component: 1000 - total flux cleaned = 0.0011711 Jy ! Component: 1050 - total flux cleaned = 0.00120937 Jy ! Component: 1100 - total flux cleaned = 0.0011967 Jy ! Component: 1150 - total flux cleaned = 0.00124639 Jy ! Component: 1200 - total flux cleaned = 0.00120936 Jy ! Component: 1250 - total flux cleaned = 0.00124592 Jy ! Component: 1300 - total flux cleaned = 0.0012582 Jy ! Component: 1350 - total flux cleaned = 0.0012584 Jy ! Component: 1400 - total flux cleaned = 0.00128193 Jy ! Component: 1450 - total flux cleaned = 0.00125848 Jy ! Component: 1500 - total flux cleaned = 0.00124673 Jy ! Component: 1550 - total flux cleaned = 0.00122373 Jy ! Component: 1600 - total flux cleaned = 0.00122374 Jy ! Component: 1650 - total flux cleaned = 0.00117897 Jy ! Component: 1700 - total flux cleaned = 0.00117914 Jy ! Component: 1750 - total flux cleaned = 0.0012123 Jy ! Component: 1800 - total flux cleaned = 0.0011796 Jy ! Component: 1850 - total flux cleaned = 0.00117961 Jy ! Component: 1900 - total flux cleaned = 0.00120107 Jy ! Component: 1950 - total flux cleaned = 0.00119042 Jy ! Component: 2000 - total flux cleaned = 0.00120075 Jy ! Component: 2050 - total flux cleaned = 0.00121129 Jy ! Component: 2100 - total flux cleaned = 0.00122164 Jy ! Component: 2150 - total flux cleaned = 0.00125255 Jy ! Component: 2200 - total flux cleaned = 0.00121156 Jy ! Component: 2250 - total flux cleaned = 0.00125225 Jy ! Component: 2300 - total flux cleaned = 0.00125211 Jy ! Component: 2350 - total flux cleaned = 0.00129188 Jy ! Component: 2400 - total flux cleaned = 0.00124208 Jy ! Component: 2450 - total flux cleaned = 0.00123215 Jy ! Component: 2500 - total flux cleaned = 0.00124192 Jy ! Component: 2550 - total flux cleaned = 0.00123224 Jy ! Component: 2600 - total flux cleaned = 0.00122253 Jy ! Component: 2650 - total flux cleaned = 0.00123239 Jy ! Component: 2700 - total flux cleaned = 0.00122293 Jy ! Component: 2750 - total flux cleaned = 0.00125133 Jy ! Component: 2800 - total flux cleaned = 0.00129824 Jy ! Component: 2850 - total flux cleaned = 0.00127022 Jy ! Component: 2900 - total flux cleaned = 0.00129807 Jy ! Component: 2950 - total flux cleaned = 0.00126116 Jy ! Component: 3000 - total flux cleaned = 0.00126115 Jy ! Component: 3050 - total flux cleaned = 0.0012612 Jy ! Component: 3100 - total flux cleaned = 0.00129743 Jy ! Component: 3150 - total flux cleaned = 0.0013064 Jy ! Component: 3200 - total flux cleaned = 0.0013064 Jy ! Component: 3250 - total flux cleaned = 0.00127094 Jy ! Component: 3300 - total flux cleaned = 0.00131521 Jy ! Component: 3350 - total flux cleaned = 0.00134157 Jy ! Component: 3400 - total flux cleaned = 0.00135039 Jy ! Component: 3450 - total flux cleaned = 0.00137637 Jy ! Component: 3500 - total flux cleaned = 0.00138499 Jy ! Component: 3550 - total flux cleaned = 0.0014108 Jy ! Component: 3600 - total flux cleaned = 0.00142786 Jy ! Component: 3650 - total flux cleaned = 0.00143632 Jy ! Component: 3700 - total flux cleaned = 0.00145321 Jy ! Component: 3750 - total flux cleaned = 0.00146159 Jy ! Component: 3800 - total flux cleaned = 0.00149505 Jy ! Component: 3850 - total flux cleaned = 0.00149513 Jy ! Component: 3900 - total flux cleaned = 0.00150339 Jy ! Component: 3950 - total flux cleaned = 0.00150339 Jy ! Component: 4000 - total flux cleaned = 0.0015361 Jy ! Component: 4050 - total flux cleaned = 0.00154416 Jy ! Total flux subtracted in 4096 components = 0.00156028 Jy ! Clean residual min=-0.000464 max=0.000485 Jy/beam ! Clean residual mean=-0.000000 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.252992 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 601 components and 0.252992 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1254+0859_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8819 x 2.011 at -2.233 degrees (North through East) ! Clean map min=-0.0007629 max=0.078774 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1254+0859_X_map.fits wmodel /vlbi/uf001/uva//J1254+0859_X_map.mod ! Writing 601 model components to file: /vlbi/uf001/uva//J1254+0859_X_map.mod wobs /vlbi/uf001/uva//J1254+0859_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1254+0859_X_uvs.fits wwins /vlbi/uf001/uva//J1254+0859_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J1254+0859_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0787743 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144213 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.549212 0.549212 1.09842 2.19685 4.39369 8.78739 17.5748 35.1495 70.2991 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.078 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 546.237 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1254+0859_X_dfm.log closed on Mon Jan 14 02:05:40 2019