! Started logfile: /vlbi/uf001/uvm//J1250-4432_S_a_dfm.log on Sun Jan 13 21:35:57 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1250-4432_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1250-4432_S_a_uvm.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! AN table 2: 98 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.671659 visibilities/baseline/integration-bin.
! Found source: J1250-4432
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5247 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1250-4432_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 134 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 134 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 134 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.040808Jy  sigma=13.353800
! Fit after  self-cal, rms=0.773672Jy  sigma=9.902011
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.435 mas, bmaj=8.608 mas, bpa=-11.94 degrees
! Estimated noise=1.52203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156805 Jy
! Component: 100  -  total flux cleaned = 0.211391 Jy
! Total flux subtracted in 100 components = 0.211391 Jy
! Clean residual min=-0.015820 max=0.032969 Jy/beam
! Clean residual mean=0.000175 rms=0.005281 Jy/beam
! Combined flux in latest and established models = 0.211391 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.211391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118786Jy  sigma=1.431142
! Fit after  self-cal, rms=0.118494Jy  sigma=1.428736
! Inverting map 
! Added new window around map position (-3, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316663 Jy
! Component: 100  -  total flux cleaned = 0.0501388 Jy
! Total flux subtracted in 100 components = 0.0501388 Jy
! Clean residual min=-0.012151 max=0.019422 Jy/beam
! Clean residual mean=0.000116 rms=0.003636 Jy/beam
! Combined flux in latest and established models = 0.26153 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.26153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104940Jy  sigma=1.248783
! Fit after  self-cal, rms=0.104440Jy  sigma=1.241155
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.341 mas, bmaj=11.82 mas, bpa=-11.59 degrees
! Estimated noise=0.786673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195602 Jy
! Component: 100  -  total flux cleaned = 0.0287498 Jy
! Component: 150  -  total flux cleaned = 0.0332658 Jy
! Component: 200  -  total flux cleaned = 0.0339649 Jy
! Total flux subtracted in 200 components = 0.0339649 Jy
! Clean residual min=-0.007947 max=0.011067 Jy/beam
! Clean residual mean=0.000130 rms=0.002783 Jy/beam
! Combined flux in latest and established models = 0.295495 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 53 components and 0.295495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100972Jy  sigma=1.197172
! Fit after  self-cal, rms=0.100928Jy  sigma=1.196144
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.341 x 11.82 at -11.59 degrees (North through East)
! Clean map  min=-0.007838  max=0.18919 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.06     LA        0.91     MK        1.09     
!   NL        1.79     OV        0.99     PT        0.98     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        0.99     LA        0.96     MK        1.02     
!   PT        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.02     LA        0.92     MK        1.04     
!   NL        1.69     OV        0.98     PT        0.96     SC        1.08     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     KP        0.94     LA        0.97     MK        1.04     
!   PT        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.03     LA        0.92     MK        1.02     
!   NL        1.73     OV        0.95     PT        0.96     SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        0.97     LA        0.90     MK        0.99     
!   PT        1.05     
! 
! 
! Fit before self-cal, rms=0.100928Jy  sigma=1.196144
! Fit after  self-cal, rms=0.114636Jy  sigma=1.151450
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=11.96 mas, bpa=-11.31 degrees
! Estimated noise=0.805892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144809 Jy
! Component: 100  -  total flux cleaned = -0.00144767 Jy
! Component: 150  -  total flux cleaned = -0.00144529 Jy
! Component: 200  -  total flux cleaned = -0.0013803 Jy
! Total flux subtracted in 200 components = -0.0013803 Jy
! Clean residual min=-0.004820 max=0.005835 Jy/beam
! Clean residual mean=0.000201 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.294115 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.294115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114468Jy  sigma=1.149987
! Fit after  self-cal, rms=0.114628Jy  sigma=1.149209
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114628Jy  sigma=1.149209
! Fit after  self-cal, rms=0.115526Jy  sigma=1.138653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.389 mas, bmaj=11.94 mas, bpa=-11.31 degrees
! Estimated noise=0.805648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000711234 Jy
! Component: 100  -  total flux cleaned = -0.000824461 Jy
! Component: 150  -  total flux cleaned = -0.000867452 Jy
! Component: 200  -  total flux cleaned = -0.000909892 Jy
! Total flux subtracted in 200 components = -0.000909892 Jy
! Clean residual min=-0.003764 max=0.003223 Jy/beam
! Clean residual mean=-0.000002 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.293205 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.293205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115450Jy  sigma=1.138125
! Fit after  self-cal, rms=0.115440Jy  sigma=1.137940
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036523 Jy
! Component: 100  -  total flux cleaned = -0.000452516 Jy
! Component: 150  -  total flux cleaned = -0.000488413 Jy
! Component: 200  -  total flux cleaned = -0.000523109 Jy
! Total flux subtracted in 200 components = -0.000523109 Jy
! Clean residual min=-0.003733 max=0.003180 Jy/beam
! Clean residual mean=-0.000001 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.292682 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 86 components and 0.292682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115394Jy  sigma=1.137612
! Fit after  self-cal, rms=0.115382Jy  sigma=1.137540
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115382Jy  sigma=1.137540
! Fit after  self-cal, rms=0.116392Jy  sigma=1.137158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=11.91 mas, bpa=-11.34 degrees
! Estimated noise=0.805067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000513074 Jy
! Component: 100  -  total flux cleaned = -0.000561031 Jy
! Component: 150  -  total flux cleaned = -0.000561261 Jy
! Component: 200  -  total flux cleaned = -0.000624583 Jy
! Total flux subtracted in 200 components = -0.000624583 Jy
! Clean residual min=-0.003596 max=0.003124 Jy/beam
! Clean residual mean=-0.000012 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.292057 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 89 components and 0.292057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116344Jy  sigma=1.136869
! Fit after  self-cal, rms=0.116330Jy  sigma=1.136778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000320581 Jy
! Component: 100  -  total flux cleaned = -0.000322916 Jy
! Component: 150  -  total flux cleaned = -0.000352253 Jy
! Component: 200  -  total flux cleaned = -0.000380191 Jy
! Total flux subtracted in 200 components = -0.000380191 Jy
! Clean residual min=-0.003579 max=0.003099 Jy/beam
! Clean residual mean=-0.000011 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.291677 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.291677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116300Jy  sigma=1.136584
! Fit after  self-cal, rms=0.116288Jy  sigma=1.136536
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116288Jy  sigma=1.136536
! Fit after  self-cal, rms=0.117054Jy  sigma=1.136486
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.06 mas, bmaj=40.11 mas, bpa=-3.945 degrees
! Estimated noise=0.97409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000563459 Jy
! Component: 100  -  total flux cleaned = -0.000566912 Jy
! Component: 150  -  total flux cleaned = -0.000568314 Jy
! Component: 200  -  total flux cleaned = -0.000606684 Jy
! Total flux subtracted in 200 components = -0.000606684 Jy
! Clean residual min=-0.003031 max=0.002716 Jy/beam
! Clean residual mean=-0.000021 rms=0.000925 Jy/beam
! Combined flux in latest and established models = 0.29107 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 101 components and 0.29107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117029Jy  sigma=1.136473
! Fit after  self-cal, rms=0.117028Jy  sigma=1.136360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027161 Jy
! Component: 100  -  total flux cleaned = -0.000268128 Jy
! Component: 150  -  total flux cleaned = -0.000267372 Jy
! Component: 200  -  total flux cleaned = -0.000301412 Jy
! Total flux subtracted in 200 components = -0.000301412 Jy
! Clean residual min=-0.003048 max=0.002773 Jy/beam
! Clean residual mean=-0.000021 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.290769 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 103 components and 0.290769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117012Jy  sigma=1.136359
! Fit after  self-cal, rms=0.117008Jy  sigma=1.136311
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.381 mas, bmaj=11.89 mas, bpa=-11.37 degrees
! Estimated noise=0.804561 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.381 x 11.89 at -11.37 degrees (North through East)
! Clean map  min=-0.0033749  max=0.19668 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.433 mas, bmaj=8.547 mas, bpa=-11.52 degrees
! Estimated noise=1.60906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165381 Jy
! Component: 100  -  total flux cleaned = 0.224305 Jy
! Component: 150  -  total flux cleaned = 0.251859 Jy
! Component: 200  -  total flux cleaned = 0.266736 Jy
! Total flux subtracted in 200 components = 0.266736 Jy
! Clean residual min=-0.008122 max=0.007986 Jy/beam
! Clean residual mean=0.000043 rms=0.002077 Jy/beam
! Combined flux in latest and established models = 0.266736 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.266736 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.381 mas, bmaj=11.89 mas, bpa=-11.37 degrees
! Estimated noise=0.804561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116337 Jy
! Component: 100  -  total flux cleaned = 0.0165293 Jy
! Component: 150  -  total flux cleaned = 0.0188649 Jy
! Component: 200  -  total flux cleaned = 0.0198975 Jy
! Total flux subtracted in 200 components = 0.0198975 Jy
! Clean residual min=-0.003225 max=0.003942 Jy/beam
! Clean residual mean=-0.000008 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.286633 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 69 components and 0.286633 Jy
! Inverting map 
! Added new window around map position (5.5, 35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312047 Jy
! Component: 100  -  total flux cleaned = 0.00332491 Jy
! Component: 150  -  total flux cleaned = 0.00326937 Jy
! Component: 200  -  total flux cleaned = 0.00316904 Jy
! Total flux subtracted in 200 components = 0.00316904 Jy
! Clean residual min=-0.002977 max=0.003485 Jy/beam
! Clean residual mean=-0.000014 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.289802 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.289802 Jy
! Inverting map 
! Added new window around map position (88.5, -48.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219214 Jy
! Component: 100  -  total flux cleaned = 0.00245843 Jy
! Component: 150  -  total flux cleaned = 0.00245888 Jy
! Component: 200  -  total flux cleaned = 0.00245677 Jy
! Total flux subtracted in 200 components = 0.00245677 Jy
! Clean residual min=-0.002919 max=0.002470 Jy/beam
! Clean residual mean=-0.000030 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.292259 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 114 components and 0.292259 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.06 mas, bmaj=40.11 mas, bpa=-3.945 degrees
! Estimated noise=0.97409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448366 Jy
! Component: 100  -  total flux cleaned = 0.000423797 Jy
! Component: 150  -  total flux cleaned = 0.000398058 Jy
! Component: 200  -  total flux cleaned = 0.00039659 Jy
! Total flux subtracted in 200 components = 0.00039659 Jy
! Clean residual min=-0.002443 max=0.002321 Jy/beam
! Clean residual mean=-0.000047 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.292656 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.08963e-05 Jy
! Component: 100  -  total flux cleaned = -4.14631e-05 Jy
! Component: 150  -  total flux cleaned = -6.05643e-05 Jy
! Component: 200  -  total flux cleaned = -9.72239e-05 Jy
! Total flux subtracted in 200 components = -9.72239e-05 Jy
! Clean residual min=-0.002458 max=0.002308 Jy/beam
! Clean residual mean=-0.000047 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.292559 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.292559 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.381 mas, bmaj=11.89 mas, bpa=-11.37 degrees
! Estimated noise=0.804561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.69677e-05 Jy
! Component: 100  -  total flux cleaned = -0.000230445 Jy
! Component: 150  -  total flux cleaned = -0.00030116 Jy
! Component: 200  -  total flux cleaned = -0.000367017 Jy
! Total flux subtracted in 200 components = -0.000367017 Jy
! Clean residual min=-0.002915 max=0.002426 Jy/beam
! Clean residual mean=-0.000027 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.292192 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 146 components and 0.292192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116679Jy  sigma=1.133793
! Fit after  self-cal, rms=0.116577Jy  sigma=1.133442
wmodel J1250-4432_S_a_map.mod
! Writing 146 model components to file: J1250-4432_S_a_map.mod
wobs   J1250-4432_S_a_uvs.fits
! Writing UV FITS file: J1250-4432_S_a_uvs.fits
wwins  J1250-4432_S_a_map.win
! wwins: Wrote 4 windows to J1250-4432_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000685527 Jy
! Component: 100  -  total flux cleaned = -0.000683285 Jy
! Component: 150  -  total flux cleaned = -0.000763009 Jy
! Component: 200  -  total flux cleaned = -0.000652672 Jy
! Component: 250  -  total flux cleaned = -0.000654453 Jy
! Component: 300  -  total flux cleaned = -0.000689674 Jy
! Component: 350  -  total flux cleaned = -0.000655612 Jy
! Component: 400  -  total flux cleaned = -0.000432174 Jy
! Component: 450  -  total flux cleaned = -0.000309069 Jy
! Component: 500  -  total flux cleaned = -0.000189455 Jy
! Component: 550  -  total flux cleaned = -0.000102299 Jy
! Component: 600  -  total flux cleaned = -1.69608e-05 Jy
! Component: 650  -  total flux cleaned = 3.88954e-05 Jy
! Component: 700  -  total flux cleaned = 0.000120227 Jy
! Component: 750  -  total flux cleaned = 0.000199921 Jy
! Component: 800  -  total flux cleaned = 0.000278136 Jy
! Component: 850  -  total flux cleaned = 0.000303332 Jy
! Component: 900  -  total flux cleaned = 0.000303759 Jy
! Component: 950  -  total flux cleaned = 0.000352615 Jy
! Component: 1000  -  total flux cleaned = 0.000327962 Jy
! Component: 1050  -  total flux cleaned = 0.000280208 Jy
! Component: 1100  -  total flux cleaned = 0.000280201 Jy
! Component: 1150  -  total flux cleaned = 0.000234144 Jy
! Component: 1200  -  total flux cleaned = 0.000211074 Jy
! Component: 1250  -  total flux cleaned = 0.000188461 Jy
! Component: 1300  -  total flux cleaned = 0.000143885 Jy
! Component: 1350  -  total flux cleaned = 0.000121345 Jy
! Component: 1400  -  total flux cleaned = 5.65537e-05 Jy
! Component: 1450  -  total flux cleaned = -7.15659e-06 Jy
! Component: 1500  -  total flux cleaned = -7.13844e-06 Jy
! Component: 1550  -  total flux cleaned = -4.86809e-05 Jy
! Component: 1600  -  total flux cleaned = -0.000110117 Jy
! Component: 1650  -  total flux cleaned = -0.000110231 Jy
! Component: 1700  -  total flux cleaned = -0.000130398 Jy
! Component: 1750  -  total flux cleaned = -0.000149814 Jy
! Component: 1800  -  total flux cleaned = -0.000110138 Jy
! Component: 1850  -  total flux cleaned = -9.05446e-05 Jy
! Component: 1900  -  total flux cleaned = -0.000128968 Jy
! Component: 1950  -  total flux cleaned = -9.06547e-05 Jy
! Component: 2000  -  total flux cleaned = -5.29763e-05 Jy
! Component: 2050  -  total flux cleaned = -3.41283e-05 Jy
! Component: 2100  -  total flux cleaned = -3.43777e-05 Jy
! Component: 2150  -  total flux cleaned = 2.07039e-05 Jy
! Component: 2200  -  total flux cleaned = 3.89626e-05 Jy
! Component: 2250  -  total flux cleaned = 0.000147238 Jy
! Component: 2300  -  total flux cleaned = 0.000165065 Jy
! Component: 2350  -  total flux cleaned = 0.000271815 Jy
! Component: 2400  -  total flux cleaned = 0.000377723 Jy
! Component: 2450  -  total flux cleaned = 0.000447873 Jy
! Component: 2500  -  total flux cleaned = 0.000534999 Jy
! Component: 2550  -  total flux cleaned = 0.000638783 Jy
! Component: 2600  -  total flux cleaned = 0.000724754 Jy
! Component: 2650  -  total flux cleaned = 0.000827337 Jy
! Component: 2700  -  total flux cleaned = 0.000929131 Jy
! Component: 2750  -  total flux cleaned = 0.00104728 Jy
! Component: 2800  -  total flux cleaned = 0.00111446 Jy
! Component: 2850  -  total flux cleaned = 0.00121462 Jy
! Component: 2900  -  total flux cleaned = 0.00129769 Jy
! Component: 2950  -  total flux cleaned = 0.00142974 Jy
! Component: 3000  -  total flux cleaned = 0.00149548 Jy
! Component: 3050  -  total flux cleaned = 0.00165898 Jy
! Component: 3100  -  total flux cleaned = 0.00172406 Jy
! Component: 3150  -  total flux cleaned = 0.00180514 Jy
! Component: 3200  -  total flux cleaned = 0.00191813 Jy
! Component: 3250  -  total flux cleaned = 0.00199846 Jy
! Component: 3300  -  total flux cleaned = 0.00211042 Jy
! Component: 3350  -  total flux cleaned = 0.00212631 Jy
! Component: 3400  -  total flux cleaned = 0.00220577 Jy
! Component: 3450  -  total flux cleaned = 0.00230081 Jy
! Component: 3500  -  total flux cleaned = 0.00236395 Jy
! Component: 3550  -  total flux cleaned = 0.00244271 Jy
! Component: 3600  -  total flux cleaned = 0.00252112 Jy
! Component: 3650  -  total flux cleaned = 0.00263073 Jy
! Component: 3700  -  total flux cleaned = 0.00267759 Jy
! Component: 3750  -  total flux cleaned = 0.00277114 Jy
! Component: 3800  -  total flux cleaned = 0.00286443 Jy
! Component: 3850  -  total flux cleaned = 0.00295756 Jy
! Component: 3900  -  total flux cleaned = 0.0030351 Jy
! Component: 3950  -  total flux cleaned = 0.00312787 Jy
! Component: 4000  -  total flux cleaned = 0.00323593 Jy
! Component: 4050  -  total flux cleaned = 0.00332831 Jy
! Total flux subtracted in 4096 components = 0.0034359 Jy
! Clean residual min=-0.001005 max=0.000869 Jy/beam
! Clean residual mean=0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.295627 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 410 components and 0.295627 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1250-4432_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.381 x 11.89 at -11.37 degrees (North through East)
! Clean map  min=-0.002173  max=0.21458 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1250-4432_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1250-4432_S_a_map.mod
! Writing 410 model components to file: /vlbi/uf001/uvm//J1250-4432_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1250-4432_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1250-4432_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1250-4432_S_a_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J1250-4432_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.214578 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000301443 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421447 0.421447 0.842893 1.68579 3.37157 6.74315 13.4863 26.9726 53.9452
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.214 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.833 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1250-4432_S_a_dfm.log closed on Sun Jan 13 21:36:01 2019