! Started logfile: /vlbi/uf001/uva//J1247+6723_X_dfm.log on Mon Jan 14 02:01:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1247+6723_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1247+6723_X_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.946552 visibilities/baseline/integration-bin.
! Found source: J1247+6723
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 59292 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1247+6723_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002816Jy  sigma=23.677042
! Fit after  self-cal, rms=0.950878Jy  sigma=22.362504
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=0.9474 mas, bpa=-24.01 degrees
! Estimated noise=0.294343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0329267 Jy
! Component: 100  -  total flux cleaned = 0.0462446 Jy
! Total flux subtracted in 100 components = 0.0462446 Jy
! Clean residual min=-0.004180 max=0.017238 Jy/beam
! Clean residual mean=-0.000005 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.0462446 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0462446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070260Jy  sigma=1.629915
! Fit after  self-cal, rms=0.068812Jy  sigma=1.596212
! Inverting map 
! Added new window around map position (2.4, -7.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164605 Jy
! Component: 100  -  total flux cleaned = 0.026007 Jy
! Total flux subtracted in 100 components = 0.026007 Jy
! Clean residual min=-0.003484 max=0.007527 Jy/beam
! Clean residual mean=-0.000004 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.0722517 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 42 components and 0.0722517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062831Jy  sigma=1.438004
! Fit after  self-cal, rms=0.061381Jy  sigma=1.407661
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117086 Jy
! Component: 100  -  total flux cleaned = 0.0184202 Jy
! Total flux subtracted in 100 components = 0.0184202 Jy
! Clean residual min=-0.002753 max=0.004360 Jy/beam
! Clean residual mean=-0.000004 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.0906719 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 51 components and 0.0906719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057996Jy  sigma=1.318763
! Fit after  self-cal, rms=0.057520Jy  sigma=1.308999
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00678596 Jy
! Component: 100  -  total flux cleaned = 0.0113616 Jy
! Total flux subtracted in 100 components = 0.0113616 Jy
! Clean residual min=-0.002494 max=0.003892 Jy/beam
! Clean residual mean=-0.000003 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.102033 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 62 components and 0.102033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056136Jy  sigma=1.272400
! Fit after  self-cal, rms=0.056041Jy  sigma=1.270569
! Inverting map 
! Added new window around map position (1.6, -6.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451128 Jy
! Component: 100  -  total flux cleaned = 0.00785804 Jy
! Total flux subtracted in 100 components = 0.00785804 Jy
! Clean residual min=-0.002266 max=0.002986 Jy/beam
! Clean residual mean=-0.000003 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.109892 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.109891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055339Jy  sigma=1.252169
! Fit after  self-cal, rms=0.055311Jy  sigma=1.251589
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.075 mas, bmaj=1.23 mas, bpa=-26.08 degrees
! Estimated noise=0.12671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0062216 Jy
! Component: 100  -  total flux cleaned = 0.0106922 Jy
! Component: 150  -  total flux cleaned = 0.0141905 Jy
! Component: 200  -  total flux cleaned = 0.0170069 Jy
! Total flux subtracted in 200 components = 0.0170069 Jy
! Clean residual min=-0.001761 max=0.002325 Jy/beam
! Clean residual mean=-0.000003 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.126898 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 106 components and 0.126898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054378Jy  sigma=1.227606
! Fit after  self-cal, rms=0.054339Jy  sigma=1.226787
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.075 x 1.23 at -26.08 degrees (North through East)
! Clean map  min=-0.0016573  max=0.04729 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.97     KP        0.94     
!   LA        0.98     MK        1.14     NL        1.16     OV        0.88     
!   PT        0.87     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.08     NL        1.15     OV        0.90     
!   PT        0.87     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        0.99     KP        0.97     
!   LA        1.01     MK        1.10     NL        1.15     OV        0.89     
!   PT        0.88     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.00     KP        0.94     
!   LA        0.96     MK        1.22     NL        1.15     OV        0.89     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.95     KP        0.98     
!   LA        0.98     MK        1.12     NL        1.17     OV        0.92     
!   PT        0.88     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.17     NL        1.14     OV        0.90     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.96     KP        0.98     
!   LA        0.95     MK        1.12     NL        1.18     OV        0.91     
!   PT        0.87     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.96     KP        0.96     
!   LA        1.00     MK        1.20     NL        1.20     OV        0.88     
!   PT        0.88     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        0.91     KP        0.97     
!   LA        1.00     MK        1.07     NL        1.13     OV        0.90     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.94     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.22     OV        0.91     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.04     NL        1.18     OV        0.90     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.94     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.15     OV        0.91     
!   PT        0.86     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.054339Jy  sigma=1.226787
! Fit after  self-cal, rms=0.053366Jy  sigma=1.210510
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.102 mas, bmaj=1.255 mas, bpa=-25 degrees
! Estimated noise=0.125103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0008458 Jy
! Component: 100  -  total flux cleaned = 0.00112084 Jy
! Component: 150  -  total flux cleaned = 0.00127863 Jy
! Component: 200  -  total flux cleaned = 0.00135843 Jy
! Total flux subtracted in 200 components = 0.00135843 Jy
! Clean residual min=-0.000943 max=0.000932 Jy/beam
! Clean residual mean=-0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.128257 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.128257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053315Jy  sigma=1.209303
! Fit after  self-cal, rms=0.053360Jy  sigma=1.208712
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053360Jy  sigma=1.208712
! Fit after  self-cal, rms=0.053475Jy  sigma=1.204897
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.101 mas, bmaj=1.246 mas, bpa=-23.63 degrees
! Estimated noise=0.124559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382928 Jy
! Component: 100  -  total flux cleaned = 0.000546425 Jy
! Component: 150  -  total flux cleaned = 0.000644796 Jy
! Component: 200  -  total flux cleaned = 0.000696797 Jy
! Total flux subtracted in 200 components = 0.000696797 Jy
! Clean residual min=-0.000646 max=0.000736 Jy/beam
! Clean residual mean=0.000000 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.128954 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 128 components and 0.128954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053455Jy  sigma=1.204448
! Fit after  self-cal, rms=0.053474Jy  sigma=1.204291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-40.6, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610091 Jy
! Component: 100  -  total flux cleaned = 0.000757482 Jy
! Component: 150  -  total flux cleaned = 0.000805919 Jy
! Component: 200  -  total flux cleaned = 0.000836745 Jy
! Total flux subtracted in 200 components = 0.000836745 Jy
! Clean residual min=-0.000649 max=0.000745 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.12979 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 145 components and 0.12979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053461Jy  sigma=1.203995
! Fit after  self-cal, rms=0.053460Jy  sigma=1.203969
! Inverting map 
! Added new window around map position (28.4, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464516 Jy
! Component: 100  -  total flux cleaned = 0.000515083 Jy
! Component: 150  -  total flux cleaned = 0.000606765 Jy
! Component: 200  -  total flux cleaned = 0.000634588 Jy
! Total flux subtracted in 200 components = 0.000634588 Jy
! Clean residual min=-0.000623 max=0.000685 Jy/beam
! Clean residual mean=0.000000 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.130425 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 156 components and 0.130425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053448Jy  sigma=1.203706
! Fit after  self-cal, rms=0.053448Jy  sigma=1.203685
! Inverting map 
! Added new window around map position (-40.4, -20.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559326 Jy
! Component: 100  -  total flux cleaned = 0.000650934 Jy
! Component: 150  -  total flux cleaned = 0.000679917 Jy
! Component: 200  -  total flux cleaned = 0.000732856 Jy
! Total flux subtracted in 200 components = 0.000732856 Jy
! Clean residual min=-0.000604 max=0.000643 Jy/beam
! Clean residual mean=-0.000000 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.131158 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 167 components and 0.131158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053437Jy  sigma=1.203468
! Fit after  self-cal, rms=0.053436Jy  sigma=1.203446
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053436Jy  sigma=1.203446
! Fit after  self-cal, rms=0.053074Jy  sigma=1.203329
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.241 mas, bpa=-23.09 degrees
! Estimated noise=0.123874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196727 Jy
! Component: 100  -  total flux cleaned = 0.000303666 Jy
! Component: 150  -  total flux cleaned = 0.00040258 Jy
! Component: 200  -  total flux cleaned = 0.000468878 Jy
! Total flux subtracted in 200 components = 0.000468878 Jy
! Clean residual min=-0.000603 max=0.000631 Jy/beam
! Clean residual mean=-0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.131627 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 169 components and 0.131627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053065Jy  sigma=1.203161
! Fit after  self-cal, rms=0.053064Jy  sigma=1.203147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.14537e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119375 Jy
! Component: 150  -  total flux cleaned = 0.000168203 Jy
! Component: 200  -  total flux cleaned = 0.00020381 Jy
! Total flux subtracted in 200 components = 0.00020381 Jy
! Clean residual min=-0.000620 max=0.000624 Jy/beam
! Clean residual mean=-0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.131831 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 174 components and 0.131831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053058Jy  sigma=1.203040
! Fit after  self-cal, rms=0.053059Jy  sigma=1.203032
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053059Jy  sigma=1.203032
! Fit after  self-cal, rms=0.052840Jy  sigma=1.203006
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.391 mas, bmaj=2.562 mas, bpa=77.68 degrees
! Estimated noise=0.154328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.72141e-05 Jy
! Component: 100  -  total flux cleaned = 0.000201376 Jy
! Component: 150  -  total flux cleaned = 0.000263588 Jy
! Component: 200  -  total flux cleaned = 0.000298942 Jy
! Total flux subtracted in 200 components = 0.000298942 Jy
! Clean residual min=-0.000700 max=0.000714 Jy/beam
! Clean residual mean=-0.000000 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.132129 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 199 components and 0.132129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052838Jy  sigma=1.202961
! Fit after  self-cal, rms=0.052837Jy  sigma=1.202954
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.84876e-05 Jy
! Component: 100  -  total flux cleaned = 5.50507e-05 Jy
! Component: 150  -  total flux cleaned = 7.36807e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102893 Jy
! Total flux subtracted in 200 components = 0.000102893 Jy
! Clean residual min=-0.000696 max=0.000705 Jy/beam
! Clean residual mean=-0.000000 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.132232 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 207 components and 0.132232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052835Jy  sigma=1.202923
! Fit after  self-cal, rms=0.052835Jy  sigma=1.202926
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.238 mas, bpa=-22.7 degrees
! Estimated noise=0.123493 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.092 x 1.238 at -22.7 degrees (North through East)
! Clean map  min=-0.00058977  max=0.045288 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7965 mas, bmaj=0.9459 mas, bpa=-20.74 degrees
! Estimated noise=0.290515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0369301 Jy
! Component: 100  -  total flux cleaned = 0.0572842 Jy
! Component: 150  -  total flux cleaned = 0.0706796 Jy
! Component: 200  -  total flux cleaned = 0.0803477 Jy
! Total flux subtracted in 200 components = 0.0803477 Jy
! Clean residual min=-0.002750 max=0.005613 Jy/beam
! Clean residual mean=-0.000003 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.0803477 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0803477 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.238 mas, bpa=-22.7 degrees
! Estimated noise=0.123493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128787 Jy
! Component: 100  -  total flux cleaned = 0.0216387 Jy
! Component: 150  -  total flux cleaned = 0.0280131 Jy
! Component: 200  -  total flux cleaned = 0.0327525 Jy
! Total flux subtracted in 200 components = 0.0327525 Jy
! Clean residual min=-0.001335 max=0.002739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.1131 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 81 components and 0.1131 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035672 Jy
! Component: 100  -  total flux cleaned = 0.00629205 Jy
! Component: 150  -  total flux cleaned = 0.00840606 Jy
! Component: 200  -  total flux cleaned = 0.0100617 Jy
! Total flux subtracted in 200 components = 0.0100617 Jy
! Clean residual min=-0.000893 max=0.001020 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.123162 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 115 components and 0.123162 Jy
! Inverting map 
! Added new window around map position (1.4, -7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132992 Jy
! Component: 100  -  total flux cleaned = 0.00243941 Jy
! Component: 150  -  total flux cleaned = 0.0033977 Jy
! Component: 200  -  total flux cleaned = 0.00423903 Jy
! Total flux subtracted in 200 components = 0.00423903 Jy
! Clean residual min=-0.000721 max=0.000709 Jy/beam
! Clean residual mean=-0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.127401 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 135 components and 0.127401 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.391 mas, bmaj=2.562 mas, bpa=77.68 degrees
! Estimated noise=0.154328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100851 Jy
! Component: 100  -  total flux cleaned = 0.00169885 Jy
! Component: 150  -  total flux cleaned = 0.00227548 Jy
! Component: 200  -  total flux cleaned = 0.00271054 Jy
! Total flux subtracted in 200 components = 0.00271054 Jy
! Clean residual min=-0.000662 max=0.000747 Jy/beam
! Clean residual mean=-0.000000 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.130111 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000344437 Jy
! Component: 100  -  total flux cleaned = 0.000648928 Jy
! Component: 150  -  total flux cleaned = 0.000920599 Jy
! Component: 200  -  total flux cleaned = 0.00110477 Jy
! Total flux subtracted in 200 components = 0.00110477 Jy
! Clean residual min=-0.000664 max=0.000724 Jy/beam
! Clean residual mean=-0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.131216 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 195 components and 0.131216 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.238 mas, bpa=-22.7 degrees
! Estimated noise=0.123493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.20212e-05 Jy
! Component: 100  -  total flux cleaned = 6.81726e-05 Jy
! Component: 150  -  total flux cleaned = 0.000158675 Jy
! Component: 200  -  total flux cleaned = 0.000243501 Jy
! Total flux subtracted in 200 components = 0.000243501 Jy
! Clean residual min=-0.000658 max=0.000642 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.13146 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 218 components and 0.13146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052855Jy  sigma=1.203278
! Fit after  self-cal, rms=0.052832Jy  sigma=1.202946
wmodel J1247+6723_X_map.mod
! Writing 218 model components to file: J1247+6723_X_map.mod
wobs   J1247+6723_X_uvs.fits
! Writing UV FITS file: J1247+6723_X_uvs.fits
wwins  J1247+6723_X_map.win
! wwins: Wrote 9 windows to J1247+6723_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141914 Jy
! Component: 100  -  total flux cleaned = 0.000174606 Jy
! Component: 150  -  total flux cleaned = 0.000196 Jy
! Component: 200  -  total flux cleaned = 0.000185674 Jy
! Component: 250  -  total flux cleaned = 0.000175417 Jy
! Component: 300  -  total flux cleaned = 0.000105381 Jy
! Component: 350  -  total flux cleaned = 7.59302e-05 Jy
! Component: 400  -  total flux cleaned = 1.76073e-05 Jy
! Component: 450  -  total flux cleaned = -1.67462e-06 Jy
! Component: 500  -  total flux cleaned = -3.02174e-05 Jy
! Component: 550  -  total flux cleaned = -8.61393e-05 Jy
! Component: 600  -  total flux cleaned = -0.000104631 Jy
! Component: 650  -  total flux cleaned = -0.000195736 Jy
! Component: 700  -  total flux cleaned = -0.000258583 Jy
! Component: 750  -  total flux cleaned = -0.00032087 Jy
! Component: 800  -  total flux cleaned = -0.000356124 Jy
! Component: 850  -  total flux cleaned = -0.000426099 Jy
! Component: 900  -  total flux cleaned = -0.000452103 Jy
! Component: 950  -  total flux cleaned = -0.000512308 Jy
! Component: 1000  -  total flux cleaned = -0.000546342 Jy
! Component: 1050  -  total flux cleaned = -0.000605329 Jy
! Component: 1100  -  total flux cleaned = -0.000647142 Jy
! Component: 1150  -  total flux cleaned = -0.000680436 Jy
! Component: 1200  -  total flux cleaned = -0.000721449 Jy
! Component: 1250  -  total flux cleaned = -0.000762307 Jy
! Component: 1300  -  total flux cleaned = -0.000794764 Jy
! Component: 1350  -  total flux cleaned = -0.000810847 Jy
! Component: 1400  -  total flux cleaned = -0.000810872 Jy
! Component: 1450  -  total flux cleaned = -0.000842655 Jy
! Component: 1500  -  total flux cleaned = -0.000858399 Jy
! Component: 1550  -  total flux cleaned = -0.000889611 Jy
! Component: 1600  -  total flux cleaned = -0.000920671 Jy
! Component: 1650  -  total flux cleaned = -0.000905307 Jy
! Component: 1700  -  total flux cleaned = -0.000936018 Jy
! Component: 1750  -  total flux cleaned = -0.00095118 Jy
! Component: 1800  -  total flux cleaned = -0.000958691 Jy
! Component: 1850  -  total flux cleaned = -0.000988791 Jy
! Component: 1900  -  total flux cleaned = -0.000981277 Jy
! Component: 1950  -  total flux cleaned = -0.000981274 Jy
! Component: 2000  -  total flux cleaned = -0.00101824 Jy
! Component: 2050  -  total flux cleaned = -0.00101831 Jy
! Component: 2100  -  total flux cleaned = -0.0010402 Jy
! Component: 2150  -  total flux cleaned = -0.00106929 Jy
! Component: 2200  -  total flux cleaned = -0.00105478 Jy
! Component: 2250  -  total flux cleaned = -0.0010476 Jy
! Component: 2300  -  total flux cleaned = -0.00105474 Jy
! Component: 2350  -  total flux cleaned = -0.00110454 Jy
! Component: 2400  -  total flux cleaned = -0.00106914 Jy
! Component: 2450  -  total flux cleaned = -0.00104802 Jy
! Component: 2500  -  total flux cleaned = -0.00109705 Jy
! Component: 2550  -  total flux cleaned = -0.00110405 Jy
! Component: 2600  -  total flux cleaned = -0.00109023 Jy
! Component: 2650  -  total flux cleaned = -0.00109706 Jy
! Component: 2700  -  total flux cleaned = -0.00104904 Jy
! Component: 2750  -  total flux cleaned = -0.00105583 Jy
! Component: 2800  -  total flux cleaned = -0.00104227 Jy
! Component: 2850  -  total flux cleaned = -0.00104234 Jy
! Component: 2900  -  total flux cleaned = -0.00101542 Jy
! Component: 2950  -  total flux cleaned = -0.00102212 Jy
! Component: 3000  -  total flux cleaned = -0.00102214 Jy
! Component: 3050  -  total flux cleaned = -0.00102872 Jy
! Component: 3100  -  total flux cleaned = -0.00101552 Jy
! Component: 3150  -  total flux cleaned = -0.000989243 Jy
! Component: 3200  -  total flux cleaned = -0.00103503 Jy
! Component: 3250  -  total flux cleaned = -0.0010155 Jy
! Component: 3300  -  total flux cleaned = -0.00100901 Jy
! Component: 3350  -  total flux cleaned = -0.00102843 Jy
! Component: 3400  -  total flux cleaned = -0.00103485 Jy
! Component: 3450  -  total flux cleaned = -0.00102209 Jy
! Component: 3500  -  total flux cleaned = -0.00100936 Jy
! Component: 3550  -  total flux cleaned = -0.00103479 Jy
! Component: 3600  -  total flux cleaned = -0.00102221 Jy
! Component: 3650  -  total flux cleaned = -0.00104731 Jy
! Component: 3700  -  total flux cleaned = -0.00107234 Jy
! Component: 3750  -  total flux cleaned = -0.00105988 Jy
! Component: 3800  -  total flux cleaned = -0.00102262 Jy
! Component: 3850  -  total flux cleaned = -0.00108448 Jy
! Component: 3900  -  total flux cleaned = -0.0010475 Jy
! Component: 3950  -  total flux cleaned = -0.00104135 Jy
! Component: 4000  -  total flux cleaned = -0.00109642 Jy
! Component: 4050  -  total flux cleaned = -0.00105374 Jy
! Total flux subtracted in 4096 components = -0.00109622 Jy
! Clean residual min=-0.000395 max=0.000364 Jy/beam
! Clean residual mean=-0.000000 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.130364 Jy
keep
! Adding 347 model components to the UV plane model.
! The established model now contains 565 components and 0.130363 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1247+6723_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.092 x 1.238 at -22.7 degrees (North through East)
! Clean map  min=-0.00046938  max=0.045138 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1247+6723_X_map.fits
wmodel /vlbi/uf001/uva//J1247+6723_X_map.mod
! Writing 565 model components to file: /vlbi/uf001/uva//J1247+6723_X_map.mod
wobs   /vlbi/uf001/uva//J1247+6723_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1247+6723_X_uvs.fits
wwins  /vlbi/uf001/uva//J1247+6723_X_map.win
! wwins: Wrote 10 windows to /vlbi/uf001/uva//J1247+6723_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0451381 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000102727 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.682749 0.682749 1.3655 2.731 5.462 10.924 21.848 43.696 87.3919
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  439.399 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1247+6723_X_dfm.log closed on Mon Jan 14 02:01:31 2019