! Started logfile: /vlbi/uf001/uva//J1232-0224_X_dfm.log on Mon Jan 14 01:55:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1232-0224_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1232-0224_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.896825 visibilities/baseline/integration-bin. ! Found source: J1232-0224 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20340 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1232-0224_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.097733Jy sigma=21.084006 ! Fit after self-cal, rms=0.696055Jy sigma=14.096955 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6649 mas, bmaj=1.617 mas, bpa=-1.917 degrees ! Estimated noise=0.383841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218628 Jy ! Component: 100 - total flux cleaned = 0.33484 Jy ! Total flux subtracted in 100 components = 0.33484 Jy ! Clean residual min=-0.035460 max=0.116845 Jy/beam ! Clean residual mean=0.000075 rms=0.008024 Jy/beam ! Combined flux in latest and established models = 0.33484 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.33484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.233866Jy sigma=4.227403 ! Fit after self-cal, rms=0.228160Jy sigma=4.116907 ! Inverting map ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117944 Jy ! Component: 100 - total flux cleaned = 0.184533 Jy ! Total flux subtracted in 100 components = 0.184533 Jy ! Clean residual min=-0.017717 max=0.038641 Jy/beam ! Clean residual mean=0.000039 rms=0.003761 Jy/beam ! Combined flux in latest and established models = 0.519373 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 11 components and 0.519373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124960Jy sigma=2.251266 ! Fit after self-cal, rms=0.120561Jy sigma=2.158479 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442311 Jy ! Component: 100 - total flux cleaned = 0.0690558 Jy ! Total flux subtracted in 100 components = 0.0690558 Jy ! Clean residual min=-0.012365 max=0.019737 Jy/beam ! Clean residual mean=0.000026 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.588429 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 13 components and 0.588429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095023Jy sigma=1.725556 ! Fit after self-cal, rms=0.094753Jy sigma=1.717626 ! Inverting map ! Added new window around map position (-2.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198886 Jy ! Component: 100 - total flux cleaned = 0.0333954 Jy ! Total flux subtracted in 100 components = 0.0333954 Jy ! Clean residual min=-0.010036 max=0.012654 Jy/beam ! Clean residual mean=0.000020 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 0.621825 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.621825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087640Jy sigma=1.596898 ! Fit after self-cal, rms=0.087464Jy sigma=1.592364 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=1.908 mas, bpa=-2.914 degrees ! Estimated noise=0.281218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.2, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229038 Jy ! Component: 100 - total flux cleaned = 0.0390686 Jy ! Component: 150 - total flux cleaned = 0.051848 Jy ! Component: 200 - total flux cleaned = 0.0621368 Jy ! Total flux subtracted in 200 components = 0.0621368 Jy ! Clean residual min=-0.012578 max=0.012128 Jy/beam ! Clean residual mean=0.000027 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 0.683961 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.683961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078035Jy sigma=1.434248 ! Fit after self-cal, rms=0.077516Jy sigma=1.423821 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8196 x 1.908 at -2.914 degrees (North through East) ! Clean map min=-0.012142 max=0.32258 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.95 KP 1.02 ! LA 1.00 MK 1.03 NL 1.10 OV 0.89 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.94 KP 1.04 ! LA 1.00 MK 1.02 NL 1.09 OV 0.90 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.96 KP 1.03 ! LA 1.00 MK 1.02 NL 1.10 OV 0.91 ! PT 0.94 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.95 KP 1.02 ! LA 1.01 MK 1.01 NL 1.10 OV 0.90 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.94 KP 1.01 ! LA 1.01 MK 1.03 NL 1.10 OV 0.90 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.94 KP 1.03 ! LA 1.00 MK 1.01 NL 1.11 OV 0.89 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.94 KP 1.01 ! LA 1.01 MK 1.02 NL 1.10 OV 0.90 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.94 KP 1.02 ! LA 1.02 MK 1.01 NL 1.10 OV 0.90 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.94 KP 1.00 ! LA 1.00 MK 1.02 NL 1.11 OV 0.90 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.95 KP 1.01 ! LA 1.01 MK 1.01 NL 1.11 OV 0.90 ! PT 0.95 SC 0.89 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.96 KP 1.00 ! LA 1.00 MK 0.99 NL 1.12 OV 0.90 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.95 KP 0.98 ! LA 1.01 MK 1.00 NL 1.11 OV 0.89 ! PT 0.94 SC 0.90 ! ! ! Fit before self-cal, rms=0.077516Jy sigma=1.423821 ! Fit after self-cal, rms=0.065603Jy sigma=1.247019 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8132 mas, bmaj=1.901 mas, bpa=-1.774 degrees ! Estimated noise=0.273035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101049 Jy ! Component: 100 - total flux cleaned = 0.016345 Jy ! Component: 150 - total flux cleaned = 0.0202432 Jy ! Component: 200 - total flux cleaned = 0.0224539 Jy ! Total flux subtracted in 200 components = 0.0224539 Jy ! Clean residual min=-0.005660 max=0.007033 Jy/beam ! Clean residual mean=0.000015 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.706415 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.706415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063458Jy sigma=1.211290 ! Fit after self-cal, rms=0.063234Jy sigma=1.207033 ! Inverting map ! Added new window around map position (-7.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755216 Jy ! Component: 100 - total flux cleaned = 0.0124432 Jy ! Component: 150 - total flux cleaned = 0.0161163 Jy ! Component: 200 - total flux cleaned = 0.0185989 Jy ! Total flux subtracted in 200 components = 0.0185989 Jy ! Clean residual min=-0.005117 max=0.005994 Jy/beam ! Clean residual mean=0.000011 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.725014 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 104 components and 0.725014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061954Jy sigma=1.184799 ! Fit after self-cal, rms=0.061857Jy sigma=1.183271 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061857Jy sigma=1.183271 ! Fit after self-cal, rms=0.061307Jy sigma=1.172851 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.812 mas, bmaj=1.903 mas, bpa=-1.855 degrees ! Estimated noise=0.272749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380073 Jy ! Component: 100 - total flux cleaned = 0.00550017 Jy ! Component: 150 - total flux cleaned = 0.00697869 Jy ! Component: 200 - total flux cleaned = 0.00800576 Jy ! Total flux subtracted in 200 components = 0.00800576 Jy ! Clean residual min=-0.004030 max=0.005275 Jy/beam ! Clean residual mean=0.000010 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.73302 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 130 components and 0.73302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060799Jy sigma=1.164334 ! Fit after self-cal, rms=0.060763Jy sigma=1.163829 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474326 Jy ! Component: 100 - total flux cleaned = 0.00757613 Jy ! Component: 150 - total flux cleaned = 0.00924141 Jy ! Component: 200 - total flux cleaned = 0.0105588 Jy ! Total flux subtracted in 200 components = 0.0105588 Jy ! Clean residual min=-0.003738 max=0.004586 Jy/beam ! Clean residual mean=0.000009 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.743579 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 150 components and 0.743579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060284Jy sigma=1.154167 ! Fit after self-cal, rms=0.060249Jy sigma=1.153572 ! Inverting map ! Added new window around map position (-4.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444383 Jy ! Component: 100 - total flux cleaned = 0.00659921 Jy ! Component: 150 - total flux cleaned = 0.00820656 Jy ! Component: 200 - total flux cleaned = 0.00962021 Jy ! Total flux subtracted in 200 components = 0.00962021 Jy ! Clean residual min=-0.003612 max=0.003787 Jy/beam ! Clean residual mean=0.000007 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.753199 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 177 components and 0.753199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059820Jy sigma=1.145576 ! Fit after self-cal, rms=0.059794Jy sigma=1.145258 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059794Jy sigma=1.145258 ! Fit after self-cal, rms=0.057949Jy sigma=1.112341 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8117 mas, bmaj=1.902 mas, bpa=-1.839 degrees ! Estimated noise=0.272861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290036 Jy ! Component: 100 - total flux cleaned = 0.00442648 Jy ! Component: 150 - total flux cleaned = 0.00562111 Jy ! Component: 200 - total flux cleaned = 0.00626913 Jy ! Total flux subtracted in 200 components = 0.00626913 Jy ! Clean residual min=-0.002226 max=0.002363 Jy/beam ! Clean residual mean=-0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.759468 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 204 components and 0.759468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057702Jy sigma=1.107796 ! Fit after self-cal, rms=0.057690Jy sigma=1.107523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192723 Jy ! Component: 100 - total flux cleaned = 0.0028676 Jy ! Component: 150 - total flux cleaned = 0.0037028 Jy ! Component: 200 - total flux cleaned = 0.00418989 Jy ! Total flux subtracted in 200 components = 0.00418989 Jy ! Clean residual min=-0.002019 max=0.002118 Jy/beam ! Clean residual mean=-0.000002 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.763658 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 234 components and 0.763658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057537Jy sigma=1.104777 ! Fit after self-cal, rms=0.057529Jy sigma=1.104685 ! Inverting map ! Added new window around map position (2.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118322 Jy ! Component: 100 - total flux cleaned = 0.00117634 Jy ! Component: 150 - total flux cleaned = 0.00155003 Jy ! Component: 200 - total flux cleaned = 0.00184827 Jy ! Total flux subtracted in 200 components = 0.00184827 Jy ! Clean residual min=-0.001858 max=0.001838 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.765506 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 250 components and 0.765506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057416Jy sigma=1.102278 ! Fit after self-cal, rms=0.057410Jy sigma=1.102220 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057410Jy sigma=1.102220 ! Fit after self-cal, rms=0.057365Jy sigma=1.101762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.984 mas, bmaj=3.347 mas, bpa=-3.972 degrees ! Estimated noise=0.395461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238712 Jy ! Component: 100 - total flux cleaned = 0.00342899 Jy ! Component: 150 - total flux cleaned = 0.00401756 Jy ! Component: 200 - total flux cleaned = 0.00443462 Jy ! Total flux subtracted in 200 components = 0.00443462 Jy ! Clean residual min=-0.001757 max=0.001900 Jy/beam ! Clean residual mean=-0.000003 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.769941 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 292 components and 0.769941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057298Jy sigma=1.100669 ! Fit after self-cal, rms=0.057288Jy sigma=1.100521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000760145 Jy ! Component: 100 - total flux cleaned = 0.00104962 Jy ! Component: 150 - total flux cleaned = 0.00133828 Jy ! Component: 200 - total flux cleaned = 0.001482 Jy ! Total flux subtracted in 200 components = 0.001482 Jy ! Clean residual min=-0.001623 max=0.001721 Jy/beam ! Clean residual mean=-0.000003 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.771423 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 311 components and 0.771423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057265Jy sigma=1.100168 ! Fit after self-cal, rms=0.057262Jy sigma=1.100129 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8112 mas, bmaj=1.902 mas, bpa=-1.834 degrees ! Estimated noise=0.272742 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8112 x 1.902 at -1.834 degrees (North through East) ! Clean map min=-0.0014714 max=0.31473 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6592 mas, bmaj=1.618 mas, bpa=-0.8286 degrees ! Estimated noise=0.369326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23227 Jy ! Component: 100 - total flux cleaned = 0.369146 Jy ! Component: 150 - total flux cleaned = 0.452332 Jy ! Component: 200 - total flux cleaned = 0.503315 Jy ! Total flux subtracted in 200 components = 0.503315 Jy ! Clean residual min=-0.009695 max=0.026759 Jy/beam ! Clean residual mean=0.000034 rms=0.002803 Jy/beam ! Combined flux in latest and established models = 0.503315 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.503315 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8112 mas, bmaj=1.902 mas, bpa=-1.834 degrees ! Estimated noise=0.272742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523712 Jy ! Component: 100 - total flux cleaned = 0.0840763 Jy ! Component: 150 - total flux cleaned = 0.107867 Jy ! Component: 200 - total flux cleaned = 0.126643 Jy ! Total flux subtracted in 200 components = 0.126643 Jy ! Clean residual min=-0.006418 max=0.011592 Jy/beam ! Clean residual mean=0.000027 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.629957 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 44 components and 0.629957 Jy ! Inverting map ! Added new window around map position (0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153907 Jy ! Component: 100 - total flux cleaned = 0.0281802 Jy ! Component: 150 - total flux cleaned = 0.0389751 Jy ! Component: 200 - total flux cleaned = 0.0483845 Jy ! Total flux subtracted in 200 components = 0.0483845 Jy ! Clean residual min=-0.004414 max=0.006223 Jy/beam ! Clean residual mean=0.000017 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.678342 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 86 components and 0.678342 Jy ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835887 Jy ! Component: 100 - total flux cleaned = 0.0157657 Jy ! Component: 150 - total flux cleaned = 0.0223777 Jy ! Component: 200 - total flux cleaned = 0.0283054 Jy ! Total flux subtracted in 200 components = 0.0283054 Jy ! Clean residual min=-0.003281 max=0.004057 Jy/beam ! Clean residual mean=0.000011 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.706647 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 129 components and 0.706647 Jy ! Inverting map ! Added new window around map position (-3.8, 43.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536337 Jy ! Component: 100 - total flux cleaned = 0.0101932 Jy ! Component: 150 - total flux cleaned = 0.0145764 Jy ! Component: 200 - total flux cleaned = 0.0185647 Jy ! Total flux subtracted in 200 components = 0.0185647 Jy ! Clean residual min=-0.002649 max=0.002828 Jy/beam ! Clean residual mean=0.000008 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.725212 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 173 components and 0.725212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.984 mas, bmaj=3.347 mas, bpa=-3.972 degrees ! Estimated noise=0.395461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803422 Jy ! Component: 100 - total flux cleaned = 0.0142802 Jy ! Component: 150 - total flux cleaned = 0.0192919 Jy ! Component: 200 - total flux cleaned = 0.0233828 Jy ! Total flux subtracted in 200 components = 0.0233828 Jy ! Clean residual min=-0.003159 max=0.002857 Jy/beam ! Clean residual mean=0.000008 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.748595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339522 Jy ! Component: 100 - total flux cleaned = 0.00628353 Jy ! Component: 150 - total flux cleaned = 0.00876036 Jy ! Component: 200 - total flux cleaned = 0.0108962 Jy ! Total flux subtracted in 200 components = 0.0108962 Jy ! Clean residual min=-0.002266 max=0.002093 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.759491 Jy ! Adding 149 model components to the UV plane model. ! The established model now contains 297 components and 0.759491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8112 mas, bmaj=1.902 mas, bpa=-1.834 degrees ! Estimated noise=0.272742 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155655 Jy ! Component: 100 - total flux cleaned = 0.00229435 Jy ! Component: 150 - total flux cleaned = 0.00307191 Jy ! Component: 200 - total flux cleaned = 0.00384133 Jy ! Total flux subtracted in 200 components = 0.00384133 Jy ! Clean residual min=-0.001735 max=0.001718 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.763332 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 327 components and 0.763332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057331Jy sigma=1.101066 ! Fit after self-cal, rms=0.057266Jy sigma=1.099668 wmodel J1232-0224_X_map.mod ! Writing 327 model components to file: J1232-0224_X_map.mod wobs J1232-0224_X_uvs.fits ! Writing UV FITS file: J1232-0224_X_uvs.fits wwins J1232-0224_X_map.win ! wwins: Wrote 13 windows to J1232-0224_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.10279e-06 Jy ! Component: 100 - total flux cleaned = 2.60088e-05 Jy ! Component: 150 - total flux cleaned = 2.57646e-05 Jy ! Component: 200 - total flux cleaned = -1.16971e-06 Jy ! Component: 250 - total flux cleaned = -2.71339e-05 Jy ! Component: 300 - total flux cleaned = -5.23829e-05 Jy ! Component: 350 - total flux cleaned = -7.72298e-05 Jy ! Component: 400 - total flux cleaned = -0.000173544 Jy ! Component: 450 - total flux cleaned = -0.000383854 Jy ! Component: 500 - total flux cleaned = -0.000498604 Jy ! Component: 550 - total flux cleaned = -0.000700824 Jy ! Component: 600 - total flux cleaned = -0.000811068 Jy ! Component: 650 - total flux cleaned = -0.000941532 Jy ! Component: 700 - total flux cleaned = -0.00102725 Jy ! Component: 750 - total flux cleaned = -0.00109081 Jy ! Component: 800 - total flux cleaned = -0.00131788 Jy ! Component: 850 - total flux cleaned = -0.00139907 Jy ! Component: 900 - total flux cleaned = -0.00147923 Jy ! Component: 950 - total flux cleaned = -0.00157823 Jy ! Component: 1000 - total flux cleaned = -0.00171447 Jy ! Component: 1050 - total flux cleaned = -0.00179136 Jy ! Component: 1100 - total flux cleaned = -0.00186726 Jy ! Component: 1150 - total flux cleaned = -0.00196109 Jy ! Component: 1200 - total flux cleaned = -0.00205348 Jy ! Component: 1250 - total flux cleaned = -0.00203556 Jy ! Component: 1300 - total flux cleaned = -0.00221662 Jy ! Component: 1350 - total flux cleaned = -0.00227005 Jy ! Component: 1400 - total flux cleaned = -0.00237598 Jy ! Component: 1450 - total flux cleaned = -0.00242867 Jy ! Component: 1500 - total flux cleaned = -0.00256714 Jy ! Component: 1550 - total flux cleaned = -0.00266952 Jy ! Component: 1600 - total flux cleaned = -0.00268632 Jy ! Component: 1650 - total flux cleaned = -0.00278675 Jy ! Component: 1700 - total flux cleaned = -0.00275376 Jy ! Component: 1750 - total flux cleaned = -0.00273756 Jy ! Component: 1800 - total flux cleaned = -0.0028676 Jy ! Component: 1850 - total flux cleaned = -0.00288343 Jy ! Component: 1900 - total flux cleaned = -0.00294704 Jy ! Component: 1950 - total flux cleaned = -0.00299431 Jy ! Component: 2000 - total flux cleaned = -0.00300994 Jy ! Component: 2050 - total flux cleaned = -0.00304118 Jy ! Component: 2100 - total flux cleaned = -0.00310259 Jy ! Component: 2150 - total flux cleaned = -0.00316383 Jy ! Component: 2200 - total flux cleaned = -0.00326953 Jy ! Component: 2250 - total flux cleaned = -0.00325434 Jy ! Component: 2300 - total flux cleaned = -0.00323956 Jy ! Component: 2350 - total flux cleaned = -0.00323954 Jy ! Component: 2400 - total flux cleaned = -0.00329795 Jy ! Component: 2450 - total flux cleaned = -0.00328355 Jy ! Component: 2500 - total flux cleaned = -0.00336979 Jy ! Component: 2550 - total flux cleaned = -0.00336964 Jy ! Component: 2600 - total flux cleaned = -0.00339814 Jy ! Component: 2650 - total flux cleaned = -0.00338406 Jy ! Component: 2700 - total flux cleaned = -0.00339797 Jy ! Component: 2750 - total flux cleaned = -0.00334248 Jy ! Component: 2800 - total flux cleaned = -0.00328749 Jy ! Component: 2850 - total flux cleaned = -0.00328761 Jy ! Component: 2900 - total flux cleaned = -0.00331462 Jy ! Component: 2950 - total flux cleaned = -0.00331478 Jy ! Component: 3000 - total flux cleaned = -0.00327453 Jy ! Component: 3050 - total flux cleaned = -0.00323475 Jy ! Component: 3100 - total flux cleaned = -0.00326113 Jy ! Component: 3150 - total flux cleaned = -0.00327434 Jy ! Component: 3200 - total flux cleaned = -0.0032353 Jy ! Component: 3250 - total flux cleaned = -0.00326113 Jy ! Component: 3300 - total flux cleaned = -0.00324833 Jy ! Component: 3350 - total flux cleaned = -0.00322273 Jy ! Component: 3400 - total flux cleaned = -0.00323543 Jy ! Component: 3450 - total flux cleaned = -0.0032858 Jy ! Component: 3500 - total flux cleaned = -0.00326077 Jy ! Component: 3550 - total flux cleaned = -0.00329783 Jy ! Component: 3600 - total flux cleaned = -0.00324853 Jy ! Component: 3650 - total flux cleaned = -0.00321161 Jy ! Component: 3700 - total flux cleaned = -0.00328482 Jy ! Component: 3750 - total flux cleaned = -0.0033453 Jy ! Component: 3800 - total flux cleaned = -0.00327293 Jy ! Component: 3850 - total flux cleaned = -0.00323697 Jy ! Component: 3900 - total flux cleaned = -0.00332022 Jy ! Component: 3950 - total flux cleaned = -0.0033321 Jy ! Component: 4000 - total flux cleaned = -0.00324984 Jy ! Component: 4050 - total flux cleaned = -0.00331997 Jy ! Total flux subtracted in 4096 components = -0.00327352 Jy ! Clean residual min=-0.000662 max=0.000659 Jy/beam ! Clean residual mean=0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.760059 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 664 components and 0.760059 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1232-0224_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8112 x 1.902 at -1.834 degrees (North through East) ! Clean map min=-0.0011283 max=0.31348 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1232-0224_X_map.fits wmodel /vlbi/uf001/uva//J1232-0224_X_map.mod ! Writing 664 model components to file: /vlbi/uf001/uva//J1232-0224_X_map.mod wobs /vlbi/uf001/uva//J1232-0224_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1232-0224_X_uvs.fits wwins /vlbi/uf001/uva//J1232-0224_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J1232-0224_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.313476 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201601 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192934 0.192934 0.385868 0.771736 1.54347 3.08695 6.17389 12.3478 24.6956 49.3911 98.7823 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.313 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1554.94 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1232-0224_X_dfm.log closed on Mon Jan 14 01:55:55 2019