! Started logfile: /vlbi/uf001/uva//J1227+3635_X_dfm.log on Mon Jan 14 01:52:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1227+3635_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1227+3635_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860819 visibilities/baseline/integration-bin. ! Found source: J1227+3635 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26496 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1227+3635_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005128Jy sigma=25.709695 ! Fit after self-cal, rms=0.918196Jy sigma=23.387214 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7313 mas, bmaj=1.608 mas, bpa=4.19 degrees ! Estimated noise=0.328594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575746 Jy ! Component: 100 - total flux cleaned = 0.0857701 Jy ! Total flux subtracted in 100 components = 0.0857701 Jy ! Clean residual min=-0.009714 max=0.023195 Jy/beam ! Clean residual mean=0.000008 rms=0.002402 Jy/beam ! Combined flux in latest and established models = 0.0857701 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0857701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086541Jy sigma=2.077507 ! Fit after self-cal, rms=0.085512Jy sigma=2.051690 ! Inverting map ! Added new window around map position (-1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248063 Jy ! Component: 100 - total flux cleaned = 0.0405163 Jy ! Total flux subtracted in 100 components = 0.0405163 Jy ! Clean residual min=-0.007886 max=0.010757 Jy/beam ! Clean residual mean=0.000002 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.126286 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.126286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074426Jy sigma=1.719950 ! Fit after self-cal, rms=0.073476Jy sigma=1.697124 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149404 Jy ! Component: 100 - total flux cleaned = 0.0251818 Jy ! Total flux subtracted in 100 components = 0.0251818 Jy ! Clean residual min=-0.006067 max=0.009652 Jy/beam ! Clean residual mean=-0.000001 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.151468 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.151468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068755Jy sigma=1.552213 ! Fit after self-cal, rms=0.068517Jy sigma=1.546123 ! Inverting map ! Added new window around map position (-18, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103734 Jy ! Component: 100 - total flux cleaned = 0.0179398 Jy ! Total flux subtracted in 100 components = 0.0179398 Jy ! Clean residual min=-0.004859 max=0.007544 Jy/beam ! Clean residual mean=-0.000002 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.169408 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.169408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066210Jy sigma=1.474062 ! Fit after self-cal, rms=0.066060Jy sigma=1.471135 ! Inverting map ! Added new window around map position (-1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00778025 Jy ! Component: 100 - total flux cleaned = 0.0136435 Jy ! Total flux subtracted in 100 components = 0.0136435 Jy ! Clean residual min=-0.004328 max=0.007136 Jy/beam ! Clean residual mean=-0.000003 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.183052 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.183052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064701Jy sigma=1.432042 ! Fit after self-cal, rms=0.064647Jy sigma=1.430691 ! Inverting map ! Added new window around map position (-32.2, 5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670304 Jy ! Component: 100 - total flux cleaned = 0.0116241 Jy ! Total flux subtracted in 100 components = 0.0116241 Jy ! Clean residual min=-0.003745 max=0.006183 Jy/beam ! Clean residual mean=-0.000003 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.194676 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.194676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063719Jy sigma=1.403158 ! Fit after self-cal, rms=0.063691Jy sigma=1.402236 ! Inverting map ! Added new window around map position (-24.4, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587114 Jy ! Component: 100 - total flux cleaned = 0.0101447 Jy ! Total flux subtracted in 100 components = 0.0101447 Jy ! Clean residual min=-0.003364 max=0.004447 Jy/beam ! Clean residual mean=-0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.20482 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.20482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062944Jy sigma=1.380739 ! Fit after self-cal, rms=0.062923Jy sigma=1.379736 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9322 mas, bmaj=1.866 mas, bpa=3.989 degrees ! Estimated noise=0.179435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607643 Jy ! Component: 100 - total flux cleaned = 0.0107241 Jy ! Component: 150 - total flux cleaned = 0.0146529 Jy ! Component: 200 - total flux cleaned = 0.0180669 Jy ! Total flux subtracted in 200 components = 0.0180669 Jy ! Clean residual min=-0.003298 max=0.004796 Jy/beam ! Clean residual mean=-0.000006 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.222887 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 113 components and 0.222887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062032Jy sigma=1.352471 ! Fit after self-cal, rms=0.062000Jy sigma=1.351349 ! Inverting map ! Added new window around map position (-3.2, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045742 Jy ! Component: 100 - total flux cleaned = 0.00766908 Jy ! Component: 150 - total flux cleaned = 0.0102684 Jy ! Component: 200 - total flux cleaned = 0.0124026 Jy ! Total flux subtracted in 200 components = 0.0124026 Jy ! Clean residual min=-0.002827 max=0.003700 Jy/beam ! Clean residual mean=-0.000005 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.23529 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 144 components and 0.23529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061505Jy sigma=1.337377 ! Fit after self-cal, rms=0.061484Jy sigma=1.336589 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9322 x 1.866 at 3.989 degrees (North through East) ! Clean map min=-0.0027634 max=0.073894 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.90 KP 0.98 ! LA 1.01 MK 0.98 NL 0.96 OV 0.94 ! PT 0.89 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.91 KP 1.00 ! LA 0.98 MK 1.06 NL 0.96 OV 0.93 ! PT 0.90 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.96 KP 0.96 ! LA 1.00 MK 1.16 NL 0.95 OV 0.93 ! PT 0.91 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.92 KP 1.01 ! LA 0.98 MK 1.12 NL 0.97 OV 0.97 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.97 KP 1.01 ! LA 1.01 MK 1.00 NL 0.97 OV 0.95 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 0.91 KP 0.99 ! LA 1.01 MK 1.06 NL 0.95 OV 0.99 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.95 KP 1.00 ! LA 0.99 MK 1.09 NL 1.01 OV 0.97 ! PT 0.89 SC 1.15 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.97 KP 1.00 ! LA 1.03 MK 1.08 NL 1.00 OV 0.97 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.04 HN 0.95 KP 1.02 ! LA 1.01 MK 1.10 NL 0.99 OV 0.94 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00 KP 1.00 ! LA 1.04 MK 1.26 NL 1.00 OV 0.98 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.91 KP 1.01 ! LA 1.02 MK 1.13 NL 1.00 OV 0.99 ! PT 0.95 SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.04 ! LA 1.03 MK 0.97 NL 1.02 OV 0.98 ! PT 0.90 SC 1.10 ! ! ! Fit before self-cal, rms=0.061484Jy sigma=1.336589 ! Fit after self-cal, rms=0.061395Jy sigma=1.319489 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9548 mas, bmaj=1.894 mas, bpa=3.412 degrees ! Estimated noise=0.180583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.2, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282185 Jy ! Component: 100 - total flux cleaned = 0.00444868 Jy ! Component: 150 - total flux cleaned = 0.00592193 Jy ! Component: 200 - total flux cleaned = 0.00719194 Jy ! Total flux subtracted in 200 components = 0.00719194 Jy ! Clean residual min=-0.002115 max=0.002985 Jy/beam ! Clean residual mean=-0.000004 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.242482 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 155 components and 0.242482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061152Jy sigma=1.311959 ! Fit after self-cal, rms=0.061157Jy sigma=1.311232 ! Inverting map ! Added new window around map position (-30.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233553 Jy ! Component: 100 - total flux cleaned = 0.00346317 Jy ! Component: 150 - total flux cleaned = 0.00433959 Jy ! Component: 200 - total flux cleaned = 0.00508209 Jy ! Total flux subtracted in 200 components = 0.00508209 Jy ! Clean residual min=-0.001813 max=0.001863 Jy/beam ! Clean residual mean=-0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.247564 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 173 components and 0.247564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061004Jy sigma=1.306931 ! Fit after self-cal, rms=0.060994Jy sigma=1.306686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060994Jy sigma=1.306686 ! Fit after self-cal, rms=0.062349Jy sigma=1.301434 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.942 mas, bmaj=1.894 mas, bpa=3.088 degrees ! Estimated noise=0.179488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137455 Jy ! Component: 100 - total flux cleaned = 0.00218664 Jy ! Component: 150 - total flux cleaned = 0.00287673 Jy ! Component: 200 - total flux cleaned = 0.00343643 Jy ! Total flux subtracted in 200 components = 0.00343643 Jy ! Clean residual min=-0.001586 max=0.001567 Jy/beam ! Clean residual mean=-0.000003 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.251 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 192 components and 0.251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062298Jy sigma=1.299641 ! Fit after self-cal, rms=0.062328Jy sigma=1.299509 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559652 Jy ! Component: 100 - total flux cleaned = 0.000969831 Jy ! Component: 150 - total flux cleaned = 0.00138643 Jy ! Component: 200 - total flux cleaned = 0.00177622 Jy ! Total flux subtracted in 200 components = 0.00177622 Jy ! Clean residual min=-0.001551 max=0.001497 Jy/beam ! Clean residual mean=-0.000003 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.252777 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 201 components and 0.252777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062299Jy sigma=1.298551 ! Fit after self-cal, rms=0.062296Jy sigma=1.298525 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062296Jy sigma=1.298525 ! Fit after self-cal, rms=0.062448Jy sigma=1.298383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9418 mas, bmaj=1.897 mas, bpa=3.252 degrees ! Estimated noise=0.179508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801367 Jy ! Component: 100 - total flux cleaned = 0.00137572 Jy ! Component: 150 - total flux cleaned = 0.00190928 Jy ! Component: 200 - total flux cleaned = 0.00225247 Jy ! Total flux subtracted in 200 components = 0.00225247 Jy ! Clean residual min=-0.001512 max=0.001471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.255029 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 210 components and 0.255029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062424Jy sigma=1.297606 ! Fit after self-cal, rms=0.062426Jy sigma=1.297585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417599 Jy ! Component: 100 - total flux cleaned = 0.000713932 Jy ! Component: 150 - total flux cleaned = 0.000972039 Jy ! Component: 200 - total flux cleaned = 0.00119658 Jy ! Total flux subtracted in 200 components = 0.00119658 Jy ! Clean residual min=-0.001487 max=0.001446 Jy/beam ! Clean residual mean=-0.000003 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.256226 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 219 components and 0.256226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062410Jy sigma=1.297094 ! Fit after self-cal, rms=0.062409Jy sigma=1.297084 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062409Jy sigma=1.297084 ! Fit after self-cal, rms=0.062454Jy sigma=1.297031 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=2.638 mas, bpa=0.3479 degrees ! Estimated noise=0.218013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139726 Jy ! Component: 100 - total flux cleaned = 0.00238754 Jy ! Component: 150 - total flux cleaned = 0.00302785 Jy ! Component: 200 - total flux cleaned = 0.00355216 Jy ! Total flux subtracted in 200 components = 0.00355216 Jy ! Clean residual min=-0.001897 max=0.001733 Jy/beam ! Clean residual mean=-0.000006 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.259778 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 228 components and 0.259778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062447Jy sigma=1.296804 ! Fit after self-cal, rms=0.062441Jy sigma=1.296719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624715 Jy ! Component: 100 - total flux cleaned = 0.00105825 Jy ! Component: 150 - total flux cleaned = 0.00127621 Jy ! Component: 200 - total flux cleaned = 0.00150044 Jy ! Total flux subtracted in 200 components = 0.00150044 Jy ! Clean residual min=-0.001872 max=0.001662 Jy/beam ! Clean residual mean=-0.000006 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.261278 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 237 components and 0.261278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062441Jy sigma=1.296692 ! Fit after self-cal, rms=0.062439Jy sigma=1.296670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.942 mas, bmaj=1.899 mas, bpa=3.337 degrees ! Estimated noise=0.179589 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.942 x 1.899 at 3.337 degrees (North through East) ! Clean map min=-0.0013865 max=0.072261 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7377 mas, bmaj=1.638 mas, bpa=3.592 degrees ! Estimated noise=0.332942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595629 Jy ! Component: 100 - total flux cleaned = 0.0939456 Jy ! Component: 150 - total flux cleaned = 0.117102 Jy ! Component: 200 - total flux cleaned = 0.13414 Jy ! Total flux subtracted in 200 components = 0.13414 Jy ! Clean residual min=-0.006103 max=0.009828 Jy/beam ! Clean residual mean=-0.000001 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.13414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.13414 Jy ! Inverting map and beam ! Estimated beam: bmin=0.942 mas, bmaj=1.899 mas, bpa=3.337 degrees ! Estimated noise=0.179589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191424 Jy ! Component: 100 - total flux cleaned = 0.0327661 Jy ! Component: 150 - total flux cleaned = 0.0437633 Jy ! Component: 200 - total flux cleaned = 0.0528695 Jy ! Total flux subtracted in 200 components = 0.0528695 Jy ! Clean residual min=-0.003839 max=0.005692 Jy/beam ! Clean residual mean=-0.000004 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.18701 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 76 components and 0.18701 Jy ! Inverting map ! Added new window around map position (-13.6, -31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771608 Jy ! Component: 100 - total flux cleaned = 0.0143129 Jy ! Component: 150 - total flux cleaned = 0.0200521 Jy ! Component: 200 - total flux cleaned = 0.0251005 Jy ! Total flux subtracted in 200 components = 0.0251005 Jy ! Clean residual min=-0.002757 max=0.003378 Jy/beam ! Clean residual mean=-0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.21211 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 111 components and 0.21211 Jy ! Inverting map ! Added new window around map position (-50.4, 24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447668 Jy ! Component: 100 - total flux cleaned = 0.00844433 Jy ! Component: 150 - total flux cleaned = 0.0120007 Jy ! Component: 200 - total flux cleaned = 0.0152023 Jy ! Total flux subtracted in 200 components = 0.0152023 Jy ! Clean residual min=-0.002142 max=0.002499 Jy/beam ! Clean residual mean=-0.000003 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.227313 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 143 components and 0.227313 Jy ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297744 Jy ! Component: 100 - total flux cleaned = 0.00562487 Jy ! Component: 150 - total flux cleaned = 0.00804209 Jy ! Component: 200 - total flux cleaned = 0.0102528 Jy ! Total flux subtracted in 200 components = 0.0102528 Jy ! Clean residual min=-0.001773 max=0.002032 Jy/beam ! Clean residual mean=-0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.237565 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 167 components and 0.237565 Jy ! Inverting map ! Added new window around map position (-3.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220073 Jy ! Component: 100 - total flux cleaned = 0.00410383 Jy ! Component: 150 - total flux cleaned = 0.00585084 Jy ! Component: 200 - total flux cleaned = 0.00745906 Jy ! Total flux subtracted in 200 components = 0.00745906 Jy ! Clean residual min=-0.001476 max=0.001880 Jy/beam ! Clean residual mean=-0.000003 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.245025 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 193 components and 0.245025 Jy ! Inverting map ! Added new window around map position (-16.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179273 Jy ! Component: 100 - total flux cleaned = 0.00323581 Jy ! Component: 150 - total flux cleaned = 0.00446867 Jy ! Component: 200 - total flux cleaned = 0.00556421 Jy ! Total flux subtracted in 200 components = 0.00556421 Jy ! Clean residual min=-0.001397 max=0.001678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.250589 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 211 components and 0.250589 Jy ! Inverting map ! Added new window around map position (3.6, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135525 Jy ! Component: 100 - total flux cleaned = 0.00234473 Jy ! Component: 150 - total flux cleaned = 0.00330315 Jy ! Component: 200 - total flux cleaned = 0.00408303 Jy ! Total flux subtracted in 200 components = 0.00408303 Jy ! Clean residual min=-0.001344 max=0.001347 Jy/beam ! Clean residual mean=-0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.254672 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 231 components and 0.254672 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=2.638 mas, bpa=0.3479 degrees ! Estimated noise=0.218013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016137 Jy ! Component: 100 - total flux cleaned = 0.00291657 Jy ! Component: 150 - total flux cleaned = 0.00400574 Jy ! Component: 200 - total flux cleaned = 0.00489792 Jy ! Total flux subtracted in 200 components = 0.00489792 Jy ! Clean residual min=-0.001718 max=0.001436 Jy/beam ! Clean residual mean=-0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.25957 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810196 Jy ! Component: 100 - total flux cleaned = 0.00158121 Jy ! Component: 150 - total flux cleaned = 0.00225524 Jy ! Component: 200 - total flux cleaned = 0.00290024 Jy ! Total flux subtracted in 200 components = 0.00290024 Jy ! Clean residual min=-0.001640 max=0.001396 Jy/beam ! Clean residual mean=-0.000003 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.26247 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 279 components and 0.26247 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.942 mas, bmaj=1.899 mas, bpa=3.337 degrees ! Estimated noise=0.179589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369231 Jy ! Component: 100 - total flux cleaned = 0.000703268 Jy ! Component: 150 - total flux cleaned = 0.000961823 Jy ! Component: 200 - total flux cleaned = 0.00127815 Jy ! Total flux subtracted in 200 components = 0.00127815 Jy ! Clean residual min=-0.001282 max=0.001158 Jy/beam ! Clean residual mean=-0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.263748 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 305 components and 0.263748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062366Jy sigma=1.294254 ! Fit after self-cal, rms=0.062339Jy sigma=1.293765 wmodel J1227+3635_X_map.mod ! Writing 305 model components to file: J1227+3635_X_map.mod wobs J1227+3635_X_uvs.fits ! Writing UV FITS file: J1227+3635_X_uvs.fits wwins J1227+3635_X_map.win ! wwins: Wrote 15 windows to J1227+3635_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370687 Jy ! Component: 100 - total flux cleaned = -0.000411045 Jy ! Component: 150 - total flux cleaned = -0.00048613 Jy ! Component: 200 - total flux cleaned = -0.000594351 Jy ! Component: 250 - total flux cleaned = -0.000646611 Jy ! Component: 300 - total flux cleaned = -0.00062995 Jy ! Component: 350 - total flux cleaned = -0.000629804 Jy ! Component: 400 - total flux cleaned = -0.000597741 Jy ! Component: 450 - total flux cleaned = -0.000612898 Jy ! Component: 500 - total flux cleaned = -0.000566792 Jy ! Component: 550 - total flux cleaned = -0.000612024 Jy ! Component: 600 - total flux cleaned = -0.000670987 Jy ! Component: 650 - total flux cleaned = -0.000729311 Jy ! Component: 700 - total flux cleaned = -0.000829223 Jy ! Component: 750 - total flux cleaned = -0.000927101 Jy ! Component: 800 - total flux cleaned = -0.000927026 Jy ! Component: 850 - total flux cleaned = -0.000994844 Jy ! Component: 900 - total flux cleaned = -0.00100797 Jy ! Component: 950 - total flux cleaned = -0.00102103 Jy ! Component: 1000 - total flux cleaned = -0.00108655 Jy ! Component: 1050 - total flux cleaned = -0.00109934 Jy ! Component: 1100 - total flux cleaned = -0.00113781 Jy ! Component: 1150 - total flux cleaned = -0.00118844 Jy ! Component: 1200 - total flux cleaned = -0.00117582 Jy ! Component: 1250 - total flux cleaned = -0.00123762 Jy ! Component: 1300 - total flux cleaned = -0.0012254 Jy ! Component: 1350 - total flux cleaned = -0.00122552 Jy ! Component: 1400 - total flux cleaned = -0.00126142 Jy ! Component: 1450 - total flux cleaned = -0.00129686 Jy ! Component: 1500 - total flux cleaned = -0.00128499 Jy ! Component: 1550 - total flux cleaned = -0.00133136 Jy ! Component: 1600 - total flux cleaned = -0.00135424 Jy ! Component: 1650 - total flux cleaned = -0.00138833 Jy ! Component: 1700 - total flux cleaned = -0.00144456 Jy ! Component: 1750 - total flux cleaned = -0.00143343 Jy ! Component: 1800 - total flux cleaned = -0.00148871 Jy ! Component: 1850 - total flux cleaned = -0.00149955 Jy ! Component: 1900 - total flux cleaned = -0.00152139 Jy ! Component: 1950 - total flux cleaned = -0.00156487 Jy ! Component: 2000 - total flux cleaned = -0.00159705 Jy ! Component: 2050 - total flux cleaned = -0.00162897 Jy ! Component: 2100 - total flux cleaned = -0.00165009 Jy ! Component: 2150 - total flux cleaned = -0.00167123 Jy ! Component: 2200 - total flux cleaned = -0.00173352 Jy ! Component: 2250 - total flux cleaned = -0.00171277 Jy ! Component: 2300 - total flux cleaned = -0.00170261 Jy ! Component: 2350 - total flux cleaned = -0.00172305 Jy ! Component: 2400 - total flux cleaned = -0.00175334 Jy ! Component: 2450 - total flux cleaned = -0.00177337 Jy ! Component: 2500 - total flux cleaned = -0.00175358 Jy ! Component: 2550 - total flux cleaned = -0.00179306 Jy ! Component: 2600 - total flux cleaned = -0.00176377 Jy ! Component: 2650 - total flux cleaned = -0.00180272 Jy ! Component: 2700 - total flux cleaned = -0.00179302 Jy ! Component: 2750 - total flux cleaned = -0.00181223 Jy ! Component: 2800 - total flux cleaned = -0.00184089 Jy ! Component: 2850 - total flux cleaned = -0.00183137 Jy ! Component: 2900 - total flux cleaned = -0.00185015 Jy ! Component: 2950 - total flux cleaned = -0.00185017 Jy ! Component: 3000 - total flux cleaned = -0.00186864 Jy ! Component: 3050 - total flux cleaned = -0.00183173 Jy ! Component: 3100 - total flux cleaned = -0.00188685 Jy ! Component: 3150 - total flux cleaned = -0.00189599 Jy ! Component: 3200 - total flux cleaned = -0.00192316 Jy ! Component: 3250 - total flux cleaned = -0.00190516 Jy ! Component: 3300 - total flux cleaned = -0.00190518 Jy ! Component: 3350 - total flux cleaned = -0.00198525 Jy ! Component: 3400 - total flux cleaned = -0.00198534 Jy ! Component: 3450 - total flux cleaned = -0.00202042 Jy ! Component: 3500 - total flux cleaned = -0.00202905 Jy ! Component: 3550 - total flux cleaned = -0.00205509 Jy ! Component: 3600 - total flux cleaned = -0.00212414 Jy ! Component: 3650 - total flux cleaned = -0.0021241 Jy ! Component: 3700 - total flux cleaned = -0.00210703 Jy ! Component: 3750 - total flux cleaned = -0.00216654 Jy ! Component: 3800 - total flux cleaned = -0.00220034 Jy ! Component: 3850 - total flux cleaned = -0.00220878 Jy ! Component: 3900 - total flux cleaned = -0.00225886 Jy ! Component: 3950 - total flux cleaned = -0.00231695 Jy ! Component: 4000 - total flux cleaned = -0.00232514 Jy ! Component: 4050 - total flux cleaned = -0.00238258 Jy ! Total flux subtracted in 4096 components = -0.0023826 Jy ! Clean residual min=-0.000419 max=0.000513 Jy/beam ! Clean residual mean=-0.000001 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.261366 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 625 components and 0.261366 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1227+3635_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.942 x 1.899 at 3.337 degrees (North through East) ! Clean map min=-0.0009001 max=0.072477 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1227+3635_X_map.fits wmodel /vlbi/uf001/uva//J1227+3635_X_map.mod ! Writing 625 model components to file: /vlbi/uf001/uva//J1227+3635_X_map.mod wobs /vlbi/uf001/uva//J1227+3635_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1227+3635_X_uvs.fits wwins /vlbi/uf001/uva//J1227+3635_X_map.win ! wwins: Wrote 16 windows to /vlbi/uf001/uva//J1227+3635_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0724771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143691 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.59477 0.59477 1.18954 2.37908 4.75816 9.51632 19.0326 38.0653 76.1306 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.072 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 504.396 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1227+3635_X_dfm.log closed on Mon Jan 14 01:52:37 2019