! Started logfile: /vlbi/uf001/uva//J1225+1253_X_dfm.log on Mon Jan 14 01:51:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1225+1253_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1225+1253_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.794381 visibilities/baseline/integration-bin.
! Found source: J1225+1253
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 37320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1225+1253_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006968Jy  sigma=22.835392
! Fit after  self-cal, rms=0.867496Jy  sigma=19.624354
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7126 mas, bmaj=1.716 mas, bpa=1.162 degrees
! Estimated noise=0.321048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100571 Jy
! Component: 100  -  total flux cleaned = 0.124925 Jy
! Total flux subtracted in 100 components = 0.124925 Jy
! Clean residual min=-0.004727 max=0.010242 Jy/beam
! Clean residual mean=-0.000012 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.124925 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.124925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063818Jy  sigma=1.376697
! Fit after  self-cal, rms=0.063793Jy  sigma=1.376379
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113728 Jy
! Component: 100  -  total flux cleaned = 0.0177467 Jy
! Total flux subtracted in 100 components = 0.0177467 Jy
! Clean residual min=-0.005214 max=0.005977 Jy/beam
! Clean residual mean=-0.000009 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.142672 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.142672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061026Jy  sigma=1.297858
! Fit after  self-cal, rms=0.061030Jy  sigma=1.297656
! Inverting map 
! Added new window around map position (0.8, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546666 Jy
! Component: 100  -  total flux cleaned = 0.00898755 Jy
! Total flux subtracted in 100 components = 0.00898755 Jy
! Clean residual min=-0.004936 max=0.004853 Jy/beam
! Clean residual mean=-0.000008 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.151659 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.151659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060319Jy  sigma=1.276243
! Fit after  self-cal, rms=0.060304Jy  sigma=1.275635
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9069 mas, bmaj=1.988 mas, bpa=0.9351 degrees
! Estimated noise=0.167314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00627991 Jy
! Component: 100  -  total flux cleaned = 0.0103025 Jy
! Component: 150  -  total flux cleaned = 0.0132389 Jy
! Component: 200  -  total flux cleaned = 0.0151388 Jy
! Total flux subtracted in 200 components = 0.0151388 Jy
! Clean residual min=-0.004593 max=0.003706 Jy/beam
! Clean residual mean=-0.000010 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.166798 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 68 components and 0.166798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059646Jy  sigma=1.253601
! Fit after  self-cal, rms=0.059638Jy  sigma=1.253229
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9069 x 1.988 at 0.9351 degrees (North through East)
! Clean map  min=-0.0041758  max=0.13259 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        1.00     KP        1.07     
!   LA        0.86     MK        1.03     NL        1.03     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        0.99     KP        1.10     
!   LA        0.85     MK        1.04     NL        1.02     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        0.98     KP        1.10     
!   LA        0.85     MK        1.01     NL        1.02     OV        0.95     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.00     KP        1.08     
!   LA        0.85     MK        1.03     NL        1.04     OV        0.97     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.99     KP        1.07     
!   LA        0.86     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        0.98     KP        1.08     
!   LA        0.85     MK        1.03     NL        1.04     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.04     HN        1.00     KP        1.10     
!   LA        0.84     MK        1.05     NL        1.01     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.98     KP        1.06     
!   LA        0.85     MK        1.02     NL        1.04     OV        0.95     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.99     KP        1.10     
!   LA        0.85     MK        1.03     NL        1.03     OV        0.95     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.98     KP        1.14     
!   LA        0.85     MK        1.03     NL        1.04     OV        0.95     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        0.98     KP        1.10     
!   LA        0.84     MK        1.07     NL        1.03     OV        0.94     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        0.99     KP        1.07     
!   LA        0.85     MK        1.03     NL        1.03     OV        0.98     
!   PT        1.01     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.059638Jy  sigma=1.253229
! Fit after  self-cal, rms=0.058639Jy  sigma=1.211390
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9128 mas, bmaj=2.008 mas, bpa=1.136 degrees
! Estimated noise=0.167076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000463503 Jy
! Component: 100  -  total flux cleaned = -0.000716131 Jy
! Component: 150  -  total flux cleaned = -0.00083109 Jy
! Component: 200  -  total flux cleaned = -0.000894175 Jy
! Total flux subtracted in 200 components = -0.000894175 Jy
! Clean residual min=-0.001431 max=0.001237 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.165904 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.165904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058563Jy  sigma=1.209656
! Fit after  self-cal, rms=0.058676Jy  sigma=1.209088
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058676Jy  sigma=1.209088
! Fit after  self-cal, rms=0.058864Jy  sigma=1.205756
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9117 mas, bmaj=2.009 mas, bpa=1.069 degrees
! Estimated noise=0.166848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000899435 Jy
! Component: 100  -  total flux cleaned = -0.00103514 Jy
! Component: 150  -  total flux cleaned = -0.00101256 Jy
! Component: 200  -  total flux cleaned = -0.00106759 Jy
! Total flux subtracted in 200 components = -0.00106759 Jy
! Clean residual min=-0.001081 max=0.001004 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.164836 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.164836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058836Jy  sigma=1.205247
! Fit after  self-cal, rms=0.058845Jy  sigma=1.205205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.23155e-05 Jy
! Component: 100  -  total flux cleaned = -3.49844e-05 Jy
! Component: 150  -  total flux cleaned = -6.18496e-05 Jy
! Component: 200  -  total flux cleaned = -8.65202e-05 Jy
! Total flux subtracted in 200 components = -8.65202e-05 Jy
! Clean residual min=-0.001079 max=0.000976 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.16475 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 120 components and 0.16475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058837Jy  sigma=1.205069
! Fit after  self-cal, rms=0.058835Jy  sigma=1.205061
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058835Jy  sigma=1.205061
! Fit after  self-cal, rms=0.059175Jy  sigma=1.204575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9105 mas, bmaj=2.01 mas, bpa=1.063 degrees
! Estimated noise=0.166862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000795401 Jy
! Component: 100  -  total flux cleaned = -0.000819771 Jy
! Component: 150  -  total flux cleaned = -0.00086752 Jy
! Component: 200  -  total flux cleaned = -0.000880558 Jy
! Total flux subtracted in 200 components = -0.000880558 Jy
! Clean residual min=-0.000932 max=0.000917 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.163869 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 124 components and 0.163869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059158Jy  sigma=1.204308
! Fit after  self-cal, rms=0.059166Jy  sigma=1.204301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.34311e-05 Jy
! Component: 100  -  total flux cleaned = -6.55873e-05 Jy
! Component: 150  -  total flux cleaned = -9.65438e-05 Jy
! Component: 200  -  total flux cleaned = -0.000115552 Jy
! Total flux subtracted in 200 components = -0.000115552 Jy
! Clean residual min=-0.000939 max=0.000894 Jy/beam
! Clean residual mean=-0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.163754 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 129 components and 0.163754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059162Jy  sigma=1.204232
! Fit after  self-cal, rms=0.059161Jy  sigma=1.204230
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059161Jy  sigma=1.204230
! Fit after  self-cal, rms=0.059217Jy  sigma=1.204089
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.08 mas, bmaj=2.888 mas, bpa=-2.999 degrees
! Estimated noise=0.204864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000607782 Jy
! Component: 100  -  total flux cleaned = -0.000717397 Jy
! Component: 150  -  total flux cleaned = -0.000749011 Jy
! Component: 200  -  total flux cleaned = -0.000767427 Jy
! Total flux subtracted in 200 components = -0.000767427 Jy
! Clean residual min=-0.001330 max=0.001012 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.162986 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 136 components and 0.162986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059209Jy  sigma=1.203977
! Fit after  self-cal, rms=0.059210Jy  sigma=1.203974
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.47709e-05 Jy
! Component: 100  -  total flux cleaned = -3.95962e-06 Jy
! Component: 150  -  total flux cleaned = 1.70649e-05 Jy
! Component: 200  -  total flux cleaned = 2.95258e-05 Jy
! Total flux subtracted in 200 components = 2.95258e-05 Jy
! Clean residual min=-0.001334 max=0.000993 Jy/beam
! Clean residual mean=-0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.163016 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 141 components and 0.163016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059210Jy  sigma=1.203951
! Fit after  self-cal, rms=0.059209Jy  sigma=1.203953
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9098 mas, bmaj=2.01 mas, bpa=1.062 degrees
! Estimated noise=0.166874 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9098 x 2.01 at 1.062 degrees (North through East)
! Clean map  min=-0.00088998  max=0.13312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7117 mas, bmaj=1.725 mas, bpa=1.365 degrees
! Estimated noise=0.323903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101372 Jy
! Component: 100  -  total flux cleaned = 0.125681 Jy
! Component: 150  -  total flux cleaned = 0.136811 Jy
! Component: 200  -  total flux cleaned = 0.142853 Jy
! Total flux subtracted in 200 components = 0.142853 Jy
! Clean residual min=-0.002123 max=0.003130 Jy/beam
! Clean residual mean=-0.000004 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.142853 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.142853 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9098 mas, bmaj=2.01 mas, bpa=1.062 degrees
! Estimated noise=0.166874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565474 Jy
! Component: 100  -  total flux cleaned = 0.00918907 Jy
! Component: 150  -  total flux cleaned = 0.0116852 Jy
! Component: 200  -  total flux cleaned = 0.0135444 Jy
! Total flux subtracted in 200 components = 0.0135444 Jy
! Clean residual min=-0.001210 max=0.001087 Jy/beam
! Clean residual mean=-0.000002 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.156398 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 65 components and 0.156398 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.08 mas, bmaj=2.888 mas, bpa=-2.999 degrees
! Estimated noise=0.204864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022398 Jy
! Component: 100  -  total flux cleaned = 0.00354309 Jy
! Component: 150  -  total flux cleaned = 0.00442472 Jy
! Component: 200  -  total flux cleaned = 0.00506459 Jy
! Total flux subtracted in 200 components = 0.00506459 Jy
! Clean residual min=-0.001388 max=0.001140 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.161462 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480865 Jy
! Component: 100  -  total flux cleaned = 0.000711115 Jy
! Component: 150  -  total flux cleaned = 0.00087921 Jy
! Component: 200  -  total flux cleaned = 0.00102289 Jy
! Total flux subtracted in 200 components = 0.00102289 Jy
! Clean residual min=-0.001349 max=0.001040 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.162485 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 134 components and 0.162485 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9098 mas, bmaj=2.01 mas, bpa=1.062 degrees
! Estimated noise=0.166874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.67182e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155731 Jy
! Component: 150  -  total flux cleaned = 0.000226985 Jy
! Component: 200  -  total flux cleaned = 0.000291878 Jy
! Total flux subtracted in 200 components = 0.000291878 Jy
! Clean residual min=-0.000993 max=0.000932 Jy/beam
! Clean residual mean=-0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.162777 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 147 components and 0.162777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059220Jy  sigma=1.204228
! Fit after  self-cal, rms=0.059213Jy  sigma=1.204189
wmodel J1225+1253_X_map.mod
! Writing 147 model components to file: J1225+1253_X_map.mod
wobs   J1225+1253_X_uvs.fits
! Writing UV FITS file: J1225+1253_X_uvs.fits
wwins  J1225+1253_X_map.win
! wwins: Wrote 3 windows to J1225+1253_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000416351 Jy
! Component: 100  -  total flux cleaned = -0.000565019 Jy
! Component: 150  -  total flux cleaned = -0.000688618 Jy
! Component: 200  -  total flux cleaned = -0.000806606 Jy
! Component: 250  -  total flux cleaned = -0.000849094 Jy
! Component: 300  -  total flux cleaned = -0.000849247 Jy
! Component: 350  -  total flux cleaned = -0.000809164 Jy
! Component: 400  -  total flux cleaned = -0.000796247 Jy
! Component: 450  -  total flux cleaned = -0.000783263 Jy
! Component: 500  -  total flux cleaned = -0.000745417 Jy
! Component: 550  -  total flux cleaned = -0.000745456 Jy
! Component: 600  -  total flux cleaned = -0.000733296 Jy
! Component: 650  -  total flux cleaned = -0.000721579 Jy
! Component: 700  -  total flux cleaned = -0.000733189 Jy
! Component: 750  -  total flux cleaned = -0.000721615 Jy
! Component: 800  -  total flux cleaned = -0.000732764 Jy
! Component: 850  -  total flux cleaned = -0.000710813 Jy
! Component: 900  -  total flux cleaned = -0.000689143 Jy
! Component: 950  -  total flux cleaned = -0.000678662 Jy
! Component: 1000  -  total flux cleaned = -0.000700271 Jy
! Component: 1050  -  total flux cleaned = -0.00067939 Jy
! Component: 1100  -  total flux cleaned = -0.000658926 Jy
! Component: 1150  -  total flux cleaned = -0.000699972 Jy
! Component: 1200  -  total flux cleaned = -0.000679815 Jy
! Component: 1250  -  total flux cleaned = -0.000679819 Jy
! Component: 1300  -  total flux cleaned = -0.000660184 Jy
! Component: 1350  -  total flux cleaned = -0.000679823 Jy
! Component: 1400  -  total flux cleaned = -0.000679877 Jy
! Component: 1450  -  total flux cleaned = -0.000660769 Jy
! Component: 1500  -  total flux cleaned = -0.000679925 Jy
! Component: 1550  -  total flux cleaned = -0.000698685 Jy
! Component: 1600  -  total flux cleaned = -0.000717392 Jy
! Component: 1650  -  total flux cleaned = -0.000735817 Jy
! Component: 1700  -  total flux cleaned = -0.000772643 Jy
! Component: 1750  -  total flux cleaned = -0.000799842 Jy
! Component: 1800  -  total flux cleaned = -0.00081776 Jy
! Component: 1850  -  total flux cleaned = -0.000871328 Jy
! Component: 1900  -  total flux cleaned = -0.000853506 Jy
! Component: 1950  -  total flux cleaned = -0.000871124 Jy
! Component: 2000  -  total flux cleaned = -0.000923474 Jy
! Component: 2050  -  total flux cleaned = -0.000957998 Jy
! Component: 2100  -  total flux cleaned = -0.000975061 Jy
! Component: 2150  -  total flux cleaned = -0.0010178 Jy
! Component: 2200  -  total flux cleaned = -0.00105166 Jy
! Component: 2250  -  total flux cleaned = -0.00107677 Jy
! Component: 2300  -  total flux cleaned = -0.00110994 Jy
! Component: 2350  -  total flux cleaned = -0.00115945 Jy
! Component: 2400  -  total flux cleaned = -0.00114305 Jy
! Component: 2450  -  total flux cleaned = -0.00120005 Jy
! Component: 2500  -  total flux cleaned = -0.00118392 Jy
! Component: 2550  -  total flux cleaned = -0.0012642 Jy
! Component: 2600  -  total flux cleaned = -0.00127214 Jy
! Component: 2650  -  total flux cleaned = -0.00128791 Jy
! Component: 2700  -  total flux cleaned = -0.0013508 Jy
! Component: 2750  -  total flux cleaned = -0.00137426 Jy
! Component: 2800  -  total flux cleaned = -0.00140529 Jy
! Component: 2850  -  total flux cleaned = -0.00138987 Jy
! Component: 2900  -  total flux cleaned = -0.00143583 Jy
! Component: 2950  -  total flux cleaned = -0.00142072 Jy
! Component: 3000  -  total flux cleaned = -0.00146597 Jy
! Component: 3050  -  total flux cleaned = -0.00152588 Jy
! Component: 3100  -  total flux cleaned = -0.00151833 Jy
! Component: 3150  -  total flux cleaned = -0.00153308 Jy
! Component: 3200  -  total flux cleaned = -0.0015185 Jy
! Component: 3250  -  total flux cleaned = -0.00154038 Jy
! Component: 3300  -  total flux cleaned = -0.00154755 Jy
! Component: 3350  -  total flux cleaned = -0.00156923 Jy
! Component: 3400  -  total flux cleaned = -0.00155486 Jy
! Component: 3450  -  total flux cleaned = -0.00157625 Jy
! Component: 3500  -  total flux cleaned = -0.00162585 Jy
! Component: 3550  -  total flux cleaned = -0.00160469 Jy
! Component: 3600  -  total flux cleaned = -0.00163971 Jy
! Component: 3650  -  total flux cleaned = -0.00162581 Jy
! Component: 3700  -  total flux cleaned = -0.00165359 Jy
! Component: 3750  -  total flux cleaned = -0.00166736 Jy
! Component: 3800  -  total flux cleaned = -0.00165364 Jy
! Component: 3850  -  total flux cleaned = -0.00168776 Jy
! Component: 3900  -  total flux cleaned = -0.00168096 Jy
! Component: 3950  -  total flux cleaned = -0.00169444 Jy
! Component: 4000  -  total flux cleaned = -0.00168778 Jy
! Component: 4050  -  total flux cleaned = -0.00169442 Jy
! Total flux subtracted in 4096 components = -0.00172089 Jy
! Clean residual min=-0.000346 max=0.000360 Jy/beam
! Clean residual mean=-0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.161056 Jy
keep
! Adding 318 model components to the UV plane model.
! The established model now contains 465 components and 0.161056 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1225+1253_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9098 x 2.01 at 1.062 degrees (North through East)
! Clean map  min=-0.00083212  max=0.13384 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1225+1253_X_map.fits
wmodel /vlbi/uf001/uva//J1225+1253_X_map.mod
! Writing 465 model components to file: /vlbi/uf001/uva//J1225+1253_X_map.mod
wobs   /vlbi/uf001/uva//J1225+1253_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1225+1253_X_uvs.fits
wwins  /vlbi/uf001/uva//J1225+1253_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1225+1253_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133841 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000116452 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.261023 0.261023 0.522046 1.04409 2.08819 4.17637 8.35274 16.7055 33.411 66.8219
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1149.32 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1225+1253_X_dfm.log closed on Mon Jan 14 01:51:37 2019