! Started logfile: /vlbi/uf001/uva//J1224+2122_X_dfm.log on Mon Jan 14 01:50:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1224+2122_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1224+2122_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957895 visibilities/baseline/integration-bin. ! Found source: J1224+2122 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29484 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1224+2122_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.685445Jy sigma=23.282355 ! Fit after self-cal, rms=0.558337Jy sigma=7.751128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.657 mas, bmaj=1.493 mas, bpa=-8.352 degrees ! Estimated noise=0.500692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.824947 Jy ! Component: 100 - total flux cleaned = 1.15425 Jy ! Total flux subtracted in 100 components = 1.15425 Jy ! Clean residual min=-0.057655 max=0.155198 Jy/beam ! Clean residual mean=0.000066 rms=0.012959 Jy/beam ! Combined flux in latest and established models = 1.15425 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.15425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.437026Jy sigma=5.445365 ! Fit after self-cal, rms=0.433208Jy sigma=5.347824 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186994 Jy ! Component: 100 - total flux cleaned = 0.287041 Jy ! Total flux subtracted in 100 components = 0.287041 Jy ! Clean residual min=-0.040546 max=0.110035 Jy/beam ! Clean residual mean=0.000018 rms=0.008127 Jy/beam ! Combined flux in latest and established models = 1.44129 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 1.44129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.278315Jy sigma=3.493831 ! Fit after self-cal, rms=0.276182Jy sigma=3.432106 ! Inverting map ! Added new window around map position (-0.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0978018 Jy ! Component: 100 - total flux cleaned = 0.156025 Jy ! Total flux subtracted in 100 components = 0.156025 Jy ! Clean residual min=-0.030678 max=0.039303 Jy/beam ! Clean residual mean=0.000014 rms=0.005764 Jy/beam ! Combined flux in latest and established models = 1.59731 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 1.59731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204955Jy sigma=2.561095 ! Fit after self-cal, rms=0.202351Jy sigma=2.518264 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049688 Jy ! Component: 100 - total flux cleaned = 0.0878427 Jy ! Total flux subtracted in 100 components = 0.0878427 Jy ! Clean residual min=-0.027769 max=0.033440 Jy/beam ! Clean residual mean=0.000010 rms=0.004887 Jy/beam ! Combined flux in latest and established models = 1.68516 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 1.68516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172990Jy sigma=2.190031 ! Fit after self-cal, rms=0.172489Jy sigma=2.179315 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351068 Jy ! Component: 100 - total flux cleaned = 0.0623813 Jy ! Total flux subtracted in 100 components = 0.0623813 Jy ! Clean residual min=-0.025474 max=0.027377 Jy/beam ! Clean residual mean=0.000005 rms=0.004395 Jy/beam ! Combined flux in latest and established models = 1.74754 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 1.74754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.157141Jy sigma=2.011982 ! Fit after self-cal, rms=0.156982Jy sigma=2.008011 ! Inverting map ! Added new window around map position (1.4, 10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272675 Jy ! Component: 100 - total flux cleaned = 0.0484953 Jy ! Total flux subtracted in 100 components = 0.0484953 Jy ! Clean residual min=-0.023141 max=0.022364 Jy/beam ! Clean residual mean=0.000003 rms=0.004086 Jy/beam ! Combined flux in latest and established models = 1.79603 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 1.79603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147147Jy sigma=1.896367 ! Fit after self-cal, rms=0.146985Jy sigma=1.894762 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8238 mas, bmaj=1.724 mas, bpa=-8.835 degrees ! Estimated noise=0.30031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328592 Jy ! Component: 100 - total flux cleaned = 0.058182 Jy ! Component: 150 - total flux cleaned = 0.079402 Jy ! Component: 200 - total flux cleaned = 0.0975922 Jy ! Total flux subtracted in 200 components = 0.0975922 Jy ! Clean residual min=-0.021091 max=0.028846 Jy/beam ! Clean residual mean=0.000008 rms=0.004980 Jy/beam ! Combined flux in latest and established models = 1.89363 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 75 components and 1.89363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131622Jy sigma=1.737200 ! Fit after self-cal, rms=0.131281Jy sigma=1.733270 ! Inverting map ! Added new window around map position (-0.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269691 Jy ! Component: 100 - total flux cleaned = 0.0447679 Jy ! Component: 150 - total flux cleaned = 0.0598114 Jy ! Component: 200 - total flux cleaned = 0.0731235 Jy ! Total flux subtracted in 200 components = 0.0731235 Jy ! Clean residual min=-0.021309 max=0.019315 Jy/beam ! Clean residual mean=-0.000002 rms=0.004470 Jy/beam ! Combined flux in latest and established models = 1.96675 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 1.96675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122115Jy sigma=1.623739 ! Fit after self-cal, rms=0.121648Jy sigma=1.617258 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8238 x 1.724 at -8.835 degrees (North through East) ! Clean map min=-0.019464 max=1.1227 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.97 KP 1.02 ! LA 1.00 MK 1.02 NL 1.07 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.97 KP 1.02 ! LA 1.00 MK 1.02 NL 1.07 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.97 KP 1.02 ! LA 1.02 MK 1.02 NL 1.07 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.01 ! LA 1.00 MK 1.03 NL 1.06 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.97 KP 1.02 ! LA 1.00 MK 1.01 NL 1.08 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.98 KP 1.02 ! LA 1.00 MK 1.02 NL 1.07 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.97 KP 1.02 ! LA 1.00 MK 1.02 NL 1.07 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.97 KP 1.03 ! LA 1.00 MK 1.03 NL 1.07 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.97 KP 1.02 ! LA 0.99 MK 1.02 NL 1.08 OV 0.91 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.98 KP 1.02 ! LA 1.01 MK 1.02 NL 1.08 OV 0.91 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.98 KP 1.03 ! LA 1.01 MK 1.01 NL 1.08 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.98 KP 1.02 ! LA 1.00 MK 1.01 NL 1.07 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.121648Jy sigma=1.617258 ! Fit after self-cal, rms=0.084478Jy sigma=1.149978 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8251 mas, bmaj=1.733 mas, bpa=-8.607 degrees ! Estimated noise=0.30058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171952 Jy ! Component: 100 - total flux cleaned = 0.0204322 Jy ! Component: 150 - total flux cleaned = 0.0231978 Jy ! Component: 200 - total flux cleaned = 0.0244069 Jy ! Total flux subtracted in 200 components = 0.0244069 Jy ! Clean residual min=-0.009046 max=0.009489 Jy/beam ! Clean residual mean=-0.000009 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 1.99116 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 1.99116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075750Jy sigma=1.039911 ! Fit after self-cal, rms=0.075280Jy sigma=1.035578 ! Inverting map ! Added new window around map position (-1.8, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584257 Jy ! Component: 100 - total flux cleaned = 0.00988713 Jy ! Component: 150 - total flux cleaned = 0.0125889 Jy ! Component: 200 - total flux cleaned = 0.0147749 Jy ! Total flux subtracted in 200 components = 0.0147749 Jy ! Clean residual min=-0.009021 max=0.007153 Jy/beam ! Clean residual mean=-0.000010 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 2.00593 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 142 components and 2.00593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072525Jy sigma=1.000028 ! Fit after self-cal, rms=0.072415Jy sigma=0.998964 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072415Jy sigma=0.998964 ! Fit after self-cal, rms=0.068724Jy sigma=0.949231 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8261 mas, bmaj=1.732 mas, bpa=-8.735 degrees ! Estimated noise=0.300327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00587245 Jy ! Component: 100 - total flux cleaned = -0.00487558 Jy ! Component: 150 - total flux cleaned = -0.00313563 Jy ! Component: 200 - total flux cleaned = -0.00178648 Jy ! Total flux subtracted in 200 components = -0.00178648 Jy ! Clean residual min=-0.005792 max=0.005592 Jy/beam ! Clean residual mean=-0.000006 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 2.00414 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 166 components and 2.00414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066906Jy sigma=0.927504 ! Fit after self-cal, rms=0.066837Jy sigma=0.926931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488504 Jy ! Component: 100 - total flux cleaned = 0.00194787 Jy ! Component: 150 - total flux cleaned = 0.00328603 Jy ! Component: 200 - total flux cleaned = 0.00410364 Jy ! Total flux subtracted in 200 components = 0.00410364 Jy ! Clean residual min=-0.005427 max=0.005118 Jy/beam ! Clean residual mean=-0.000005 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 2.00825 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 185 components and 2.00825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066093Jy sigma=0.918890 ! Fit after self-cal, rms=0.066074Jy sigma=0.918690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066074Jy sigma=0.918690 ! Fit after self-cal, rms=0.065678Jy sigma=0.914759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8264 mas, bmaj=1.732 mas, bpa=-8.767 degrees ! Estimated noise=0.300255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00368752 Jy ! Component: 100 - total flux cleaned = -0.00481878 Jy ! Component: 150 - total flux cleaned = -0.00510564 Jy ! Component: 200 - total flux cleaned = -0.00497337 Jy ! Total flux subtracted in 200 components = -0.00497337 Jy ! Clean residual min=-0.005143 max=0.004722 Jy/beam ! Clean residual mean=-0.000006 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 2.00328 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 194 components and 2.00328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064950Jy sigma=0.906038 ! Fit after self-cal, rms=0.064941Jy sigma=0.905885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357625 Jy ! Component: 100 - total flux cleaned = 0.000813094 Jy ! Component: 150 - total flux cleaned = 0.00124101 Jy ! Component: 200 - total flux cleaned = 0.00164496 Jy ! Total flux subtracted in 200 components = 0.00164496 Jy ! Clean residual min=-0.004939 max=0.004554 Jy/beam ! Clean residual mean=-0.000006 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 2.00492 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 206 components and 2.00492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064568Jy sigma=0.901575 ! Fit after self-cal, rms=0.064561Jy sigma=0.901467 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064561Jy sigma=0.901467 ! Fit after self-cal, rms=0.064389Jy sigma=0.899748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.004 mas, bmaj=2.543 mas, bpa=-7.159 degrees ! Estimated noise=0.438369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010691 Jy ! Component: 100 - total flux cleaned = -0.00108283 Jy ! Component: 150 - total flux cleaned = -0.00107588 Jy ! Component: 200 - total flux cleaned = -0.00109781 Jy ! Total flux subtracted in 200 components = -0.00109781 Jy ! Clean residual min=-0.005127 max=0.006561 Jy/beam ! Clean residual mean=-0.000013 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 2.00382 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 253 components and 2.00382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064026Jy sigma=0.897674 ! Fit after self-cal, rms=0.064017Jy sigma=0.897086 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00652377 Jy ! Component: 100 - total flux cleaned = 0.0107665 Jy ! Component: 150 - total flux cleaned = 0.0131842 Jy ! Component: 200 - total flux cleaned = 0.015017 Jy ! Total flux subtracted in 200 components = 0.015017 Jy ! Clean residual min=-0.004352 max=0.004221 Jy/beam ! Clean residual mean=-0.000008 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 2.01884 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 293 components and 2.01884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063433Jy sigma=0.891811 ! Fit after self-cal, rms=0.063410Jy sigma=0.891353 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=1.732 mas, bpa=-8.785 degrees ! Estimated noise=0.300288 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8266 x 1.732 at -8.785 degrees (North through East) ! Clean map min=-0.0043861 max=1.1216 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063410Jy sigma=0.891353 ! Fit after self-cal, rms=0.054198Jy sigma=0.769241 ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=1.732 mas, bpa=-8.758 degrees ! Estimated noise=0.300233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201686 Jy ! Component: 100 - total flux cleaned = 0.000157515 Jy ! Component: 150 - total flux cleaned = 0.000920697 Jy ! Component: 200 - total flux cleaned = 0.00161668 Jy ! Total flux subtracted in 200 components = 0.00161668 Jy ! Clean residual min=-0.004127 max=0.003966 Jy/beam ! Clean residual mean=-0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 2.02045 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 317 components and 2.02046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053719Jy sigma=0.762546 ! Fit after self-cal, rms=0.053698Jy sigma=0.762339 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802268 Jy ! Component: 100 - total flux cleaned = 0.00171778 Jy ! Component: 150 - total flux cleaned = 0.0026644 Jy ! Component: 200 - total flux cleaned = 0.00315596 Jy ! Total flux subtracted in 200 components = 0.00315596 Jy ! Clean residual min=-0.003952 max=0.003797 Jy/beam ! Clean residual mean=-0.000003 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 2.02361 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 329 components and 2.02361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053439Jy sigma=0.758556 ! Fit after self-cal, rms=0.053429Jy sigma=0.758463 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053429Jy sigma=0.758463 ! Fit after self-cal, rms=0.053353Jy sigma=0.757968 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6585 mas, bmaj=1.493 mas, bpa=-8.293 degrees ! Estimated noise=0.501802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.831369 Jy ! Component: 100 - total flux cleaned = 1.18285 Jy ! Component: 150 - total flux cleaned = 1.37138 Jy ! Component: 200 - total flux cleaned = 1.48654 Jy ! Total flux subtracted in 200 components = 1.48654 Jy ! Clean residual min=-0.022332 max=0.060126 Jy/beam ! Clean residual mean=0.000020 rms=0.005278 Jy/beam ! Combined flux in latest and established models = 1.48654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.48654 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=1.732 mas, bpa=-8.76 degrees ! Estimated noise=0.300217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106459 Jy ! Component: 100 - total flux cleaned = 0.171411 Jy ! Component: 150 - total flux cleaned = 0.217098 Jy ! Component: 200 - total flux cleaned = 0.253004 Jy ! Total flux subtracted in 200 components = 0.253004 Jy ! Clean residual min=-0.012303 max=0.021342 Jy/beam ! Clean residual mean=0.000023 rms=0.003280 Jy/beam ! Combined flux in latest and established models = 1.73955 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 1.73955 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288175 Jy ! Component: 100 - total flux cleaned = 0.0524831 Jy ! Component: 150 - total flux cleaned = 0.0722733 Jy ! Component: 200 - total flux cleaned = 0.0892423 Jy ! Total flux subtracted in 200 components = 0.0892423 Jy ! Clean residual min=-0.008046 max=0.010896 Jy/beam ! Clean residual mean=0.000011 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 1.82879 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 78 components and 1.82879 Jy ! Inverting map ! Added new window around map position (-0.4, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148759 Jy ! Component: 100 - total flux cleaned = 0.0280153 Jy ! Component: 150 - total flux cleaned = 0.039713 Jy ! Component: 200 - total flux cleaned = 0.0502381 Jy ! Total flux subtracted in 200 components = 0.0502381 Jy ! Clean residual min=-0.006741 max=0.007000 Jy/beam ! Clean residual mean=0.000005 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 1.87903 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 105 components and 1.87903 Jy ! Inverting map ! Added new window around map position (15, -23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959282 Jy ! Component: 100 - total flux cleaned = 0.0183718 Jy ! Component: 150 - total flux cleaned = 0.0264379 Jy ! Component: 200 - total flux cleaned = 0.0338614 Jy ! Total flux subtracted in 200 components = 0.0338614 Jy ! Clean residual min=-0.005681 max=0.005242 Jy/beam ! Clean residual mean=0.000003 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 1.91289 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 126 components and 1.91289 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.005 mas, bmaj=2.544 mas, bpa=-7.122 degrees ! Estimated noise=0.438165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137738 Jy ! Component: 100 - total flux cleaned = 0.024685 Jy ! Component: 150 - total flux cleaned = 0.0338404 Jy ! Component: 200 - total flux cleaned = 0.0416908 Jy ! Total flux subtracted in 200 components = 0.0416908 Jy ! Clean residual min=-0.005971 max=0.005323 Jy/beam ! Clean residual mean=-0.000000 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 1.95458 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684232 Jy ! Component: 100 - total flux cleaned = 0.0128785 Jy ! Component: 150 - total flux cleaned = 0.0182582 Jy ! Component: 200 - total flux cleaned = 0.0230857 Jy ! Total flux subtracted in 200 components = 0.0230857 Jy ! Clean residual min=-0.005035 max=0.004507 Jy/beam ! Clean residual mean=-0.000003 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 1.97766 Jy ! Adding 162 model components to the UV plane model. ! The established model now contains 265 components and 1.97766 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=1.732 mas, bpa=-8.76 degrees ! Estimated noise=0.300217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451519 Jy ! Component: 100 - total flux cleaned = 0.00822928 Jy ! Component: 150 - total flux cleaned = 0.0109125 Jy ! Component: 200 - total flux cleaned = 0.0131706 Jy ! Total flux subtracted in 200 components = 0.0131706 Jy ! Clean residual min=-0.004223 max=0.003479 Jy/beam ! Clean residual mean=-0.000002 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 1.99084 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 297 components and 1.99084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054323Jy sigma=0.769933 ! Fit after self-cal, rms=0.054000Jy sigma=0.764749 wmodel J1224+2122_X_map.mod ! Writing 297 model components to file: J1224+2122_X_map.mod wobs J1224+2122_X_uvs.fits ! Writing UV FITS file: J1224+2122_X_uvs.fits wwins J1224+2122_X_map.win ! wwins: Wrote 10 windows to J1224+2122_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000965624 Jy ! Component: 100 - total flux cleaned = -0.00150824 Jy ! Component: 150 - total flux cleaned = -0.0020212 Jy ! Component: 200 - total flux cleaned = -0.00283761 Jy ! Component: 250 - total flux cleaned = -0.00341775 Jy ! Component: 300 - total flux cleaned = -0.00387965 Jy ! Component: 350 - total flux cleaned = -0.00432866 Jy ! Component: 400 - total flux cleaned = -0.00486205 Jy ! Component: 450 - total flux cleaned = -0.00519228 Jy ! Component: 500 - total flux cleaned = -0.00560824 Jy ! Component: 550 - total flux cleaned = -0.00592564 Jy ! Component: 600 - total flux cleaned = -0.00619158 Jy ! Component: 650 - total flux cleaned = -0.00632176 Jy ! Component: 700 - total flux cleaned = -0.00644989 Jy ! Component: 750 - total flux cleaned = -0.0064503 Jy ! Component: 800 - total flux cleaned = -0.00653336 Jy ! Component: 850 - total flux cleaned = -0.00669454 Jy ! Component: 900 - total flux cleaned = -0.00681301 Jy ! Component: 950 - total flux cleaned = -0.00693005 Jy ! Component: 1000 - total flux cleaned = -0.00708314 Jy ! Component: 1050 - total flux cleaned = -0.00734637 Jy ! Component: 1100 - total flux cleaned = -0.00741992 Jy ! Component: 1150 - total flux cleaned = -0.00771165 Jy ! Component: 1200 - total flux cleaned = -0.0078915 Jy ! Component: 1250 - total flux cleaned = -0.0081752 Jy ! Component: 1300 - total flux cleaned = -0.00834986 Jy ! Component: 1350 - total flux cleaned = -0.00852172 Jy ! Component: 1400 - total flux cleaned = -0.00879392 Jy ! Component: 1450 - total flux cleaned = -0.00896156 Jy ! Component: 1500 - total flux cleaned = -0.00919306 Jy ! Component: 1550 - total flux cleaned = -0.00935609 Jy ! Component: 1600 - total flux cleaned = -0.00954993 Jy ! Component: 1650 - total flux cleaned = -0.00967816 Jy ! Component: 1700 - total flux cleaned = -0.00996072 Jy ! Component: 1750 - total flux cleaned = -0.0101161 Jy ! Component: 1800 - total flux cleaned = -0.0102995 Jy ! Component: 1850 - total flux cleaned = -0.0104209 Jy ! Component: 1900 - total flux cleaned = -0.0105703 Jy ! Component: 1950 - total flux cleaned = -0.0106595 Jy ! Component: 2000 - total flux cleaned = -0.0109518 Jy ! Component: 2050 - total flux cleaned = -0.0109521 Jy ! Component: 2100 - total flux cleaned = -0.0111239 Jy ! Component: 2150 - total flux cleaned = -0.011321 Jy ! Component: 2200 - total flux cleaned = -0.0114333 Jy ! Component: 2250 - total flux cleaned = -0.0115438 Jy ! Component: 2300 - total flux cleaned = -0.0116258 Jy ! Component: 2350 - total flux cleaned = -0.0117337 Jy ! Component: 2400 - total flux cleaned = -0.0118143 Jy ! Component: 2450 - total flux cleaned = -0.0119734 Jy ! Component: 2500 - total flux cleaned = -0.0120522 Jy ! Component: 2550 - total flux cleaned = -0.0122078 Jy ! Component: 2600 - total flux cleaned = -0.0124128 Jy ! Component: 2650 - total flux cleaned = -0.0123618 Jy ! Component: 2700 - total flux cleaned = -0.0125626 Jy ! Component: 2750 - total flux cleaned = -0.0125877 Jy ! Component: 2800 - total flux cleaned = -0.0126859 Jy ! Component: 2850 - total flux cleaned = -0.0127587 Jy ! Component: 2900 - total flux cleaned = -0.0129035 Jy ! Component: 2950 - total flux cleaned = -0.0129991 Jy ! Component: 3000 - total flux cleaned = -0.0130465 Jy ! Component: 3050 - total flux cleaned = -0.0131167 Jy ! Component: 3100 - total flux cleaned = -0.0132327 Jy ! Component: 3150 - total flux cleaned = -0.0134628 Jy ! Component: 3200 - total flux cleaned = -0.0135538 Jy ! Component: 3250 - total flux cleaned = -0.013712 Jy ! Component: 3300 - total flux cleaned = -0.0138018 Jy ! Component: 3350 - total flux cleaned = -0.0137132 Jy ! Component: 3400 - total flux cleaned = -0.0138675 Jy ! Component: 3450 - total flux cleaned = -0.014042 Jy ! Component: 3500 - total flux cleaned = -0.0141284 Jy ! Component: 3550 - total flux cleaned = -0.014214 Jy ! Component: 3600 - total flux cleaned = -0.0142994 Jy ! Component: 3650 - total flux cleaned = -0.0144678 Jy ! Component: 3700 - total flux cleaned = -0.0144469 Jy ! Component: 3750 - total flux cleaned = -0.01453 Jy ! Component: 3800 - total flux cleaned = -0.0146124 Jy ! Component: 3850 - total flux cleaned = -0.0147549 Jy ! Component: 3900 - total flux cleaned = -0.0147752 Jy ! Component: 3950 - total flux cleaned = -0.0148352 Jy ! Component: 4000 - total flux cleaned = -0.0149148 Jy ! Component: 4050 - total flux cleaned = -0.0148753 Jy ! Total flux subtracted in 4096 components = -0.0149144 Jy ! Clean residual min=-0.001000 max=0.000976 Jy/beam ! Clean residual mean=-0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 1.97592 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 621 components and 1.97592 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1224+2122_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8266 x 1.732 at -8.76 degrees (North through East) ! Clean map min=-0.0024634 max=1.1225 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1224+2122_X_map.fits wmodel /vlbi/uf001/uva//J1224+2122_X_map.mod ! Writing 621 model components to file: /vlbi/uf001/uva//J1224+2122_X_map.mod wobs /vlbi/uf001/uva//J1224+2122_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1224+2122_X_uvs.fits wwins /vlbi/uf001/uva//J1224+2122_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J1224+2122_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.12251 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000327164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.087437 0.087437 0.174874 0.349748 0.699496 1.39899 2.79798 5.59597 11.1919 22.3839 44.7677 89.5355 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.122 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3431.04 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1224+2122_X_dfm.log closed on Mon Jan 14 01:51:02 2019