! Started logfile: /vlbi/uf001/uvm//J1223+8040_X_a_dfm.log on Sun Jan 13 21:33:25 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1223+8040_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1223+8040_X_a_uvm.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! AN table 2: 15 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.814208 visibilities/baseline/integration-bin. ! Found source: J1223+8040 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35760 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1223+8040_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 111 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.124006Jy sigma=21.337840 ! Fit after self-cal, rms=0.513480Jy sigma=9.824731 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7529 mas, bmaj=0.9491 mas, bpa=54.25 degrees ! Estimated noise=0.301627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.369413 Jy ! Component: 100 - total flux cleaned = 0.457274 Jy ! Total flux subtracted in 100 components = 0.457274 Jy ! Clean residual min=-0.008745 max=0.040025 Jy/beam ! Clean residual mean=-0.000011 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.457274 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.457274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121486Jy sigma=2.252420 ! Fit after self-cal, rms=0.121283Jy sigma=2.249145 ! Inverting map ! Added new window around map position (-0.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429617 Jy ! Component: 100 - total flux cleaned = 0.0659342 Jy ! Total flux subtracted in 100 components = 0.0659342 Jy ! Clean residual min=-0.008413 max=0.013686 Jy/beam ! Clean residual mean=-0.000006 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.523209 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.523209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098351Jy sigma=1.833979 ! Fit after self-cal, rms=0.097572Jy sigma=1.820098 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160358 Jy ! Component: 100 - total flux cleaned = 0.0222422 Jy ! Total flux subtracted in 100 components = 0.0222422 Jy ! Clean residual min=-0.007791 max=0.013668 Jy/beam ! Clean residual mean=-0.000004 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.545451 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.545451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093589Jy sigma=1.755193 ! Fit after self-cal, rms=0.093422Jy sigma=1.752263 ! Inverting map ! Added new window around map position (-0.8, 5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124176 Jy ! Component: 100 - total flux cleaned = 0.0169388 Jy ! Total flux subtracted in 100 components = 0.0169388 Jy ! Clean residual min=-0.006853 max=0.011030 Jy/beam ! Clean residual mean=-0.000003 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.56239 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.56239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090721Jy sigma=1.702351 ! Fit after self-cal, rms=0.090542Jy sigma=1.699101 ! Inverting map ! Added new window around map position (-0.6, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975801 Jy ! Component: 100 - total flux cleaned = 0.0141017 Jy ! Total flux subtracted in 100 components = 0.0141017 Jy ! Clean residual min=-0.006569 max=0.009750 Jy/beam ! Clean residual mean=-0.000002 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.576491 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.576491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088694Jy sigma=1.666423 ! Fit after self-cal, rms=0.088629Jy sigma=1.665287 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914952 Jy ! Component: 100 - total flux cleaned = 0.0124779 Jy ! Total flux subtracted in 100 components = 0.0124779 Jy ! Clean residual min=-0.006547 max=0.009056 Jy/beam ! Clean residual mean=-0.000002 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.588969 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 42 components and 0.588969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087141Jy sigma=1.638158 ! Fit after self-cal, rms=0.087034Jy sigma=1.636048 ! Inverting map ! Added new window around map position (-2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798707 Jy ! Component: 100 - total flux cleaned = 0.0119199 Jy ! Total flux subtracted in 100 components = 0.0119199 Jy ! Clean residual min=-0.006487 max=0.007265 Jy/beam ! Clean residual mean=-0.000001 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.600889 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.600889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085941Jy sigma=1.616116 ! Fit after self-cal, rms=0.085908Jy sigma=1.615493 ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695639 Jy ! Component: 100 - total flux cleaned = 0.0101042 Jy ! Total flux subtracted in 100 components = 0.0101042 Jy ! Clean residual min=-0.006286 max=0.006552 Jy/beam ! Clean residual mean=-0.000001 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.610993 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.610993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085088Jy sigma=1.599858 ! Fit after self-cal, rms=0.085055Jy sigma=1.599283 ! Inverting map ! Added new window around map position (-3.2, 8.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060049 Jy ! Component: 100 - total flux cleaned = 0.00872873 Jy ! Total flux subtracted in 100 components = 0.00872873 Jy ! Clean residual min=-0.006056 max=0.006236 Jy/beam ! Clean residual mean=-0.000001 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.619722 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.619722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084354Jy sigma=1.585510 ! Fit after self-cal, rms=0.084338Jy sigma=1.585199 ! Inverting map ! Added new window around map position (0.6, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505436 Jy ! Component: 100 - total flux cleaned = 0.00811133 Jy ! Total flux subtracted in 100 components = 0.00811133 Jy ! Clean residual min=-0.006041 max=0.005972 Jy/beam ! Clean residual mean=-0.000001 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.627833 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.627833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083739Jy sigma=1.573569 ! Fit after self-cal, rms=0.083721Jy sigma=1.573228 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.973 mas, bmaj=1.207 mas, bpa=53.41 degrees ! Estimated noise=0.208847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692623 Jy ! Component: 100 - total flux cleaned = 0.0124071 Jy ! Component: 150 - total flux cleaned = 0.0169816 Jy ! Component: 200 - total flux cleaned = 0.0205869 Jy ! Total flux subtracted in 200 components = 0.0205869 Jy ! Clean residual min=-0.006944 max=0.006124 Jy/beam ! Clean residual mean=0.000006 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.64842 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 87 components and 0.64842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082815Jy sigma=1.555703 ! Fit after self-cal, rms=0.082782Jy sigma=1.555084 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.973 x 1.207 at 53.41 degrees (North through East) ! Clean map min=-0.006816 max=0.47823 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 1.04 ! LA 1.00 MK 1.04 NL 1.06 OV 0.93 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 0.93 KP 0.98 ! LA 0.98 MK 0.98 NL 1.02 OV 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.95 KP 1.04 ! LA 1.00 MK 1.05 NL 1.06 OV 0.93 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.94 HN 0.92 KP 1.00 ! LA 0.98 MK 0.97 NL 1.00 OV 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 1.04 ! LA 1.01 MK 1.05 NL 1.06 OV 0.93 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 HN 0.91 KP 0.99 ! LA 0.97 MK 1.00 NL 1.02 OV 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 1.05 ! LA 1.00 MK 1.05 NL 1.06 OV 0.93 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.95 HN 0.93 KP 1.00 ! LA 0.97 MK 0.99 NL 1.01 OV 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 1.03 ! LA 1.00 MK 1.04 NL 1.06 OV 0.93 ! PT 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.91 KP 1.00 ! LA 0.98 MK 0.99 NL 1.02 OV 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.95 KP 1.03 ! LA 0.98 MK 1.05 NL 1.05 OV 0.94 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 0.92 KP 0.99 ! LA 0.96 MK 0.99 NL 1.01 OV 0.88 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.96 KP 1.04 ! LA 0.99 MK 1.04 NL 1.06 OV 0.93 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 HN 0.92 KP 0.99 ! LA 0.97 MK 0.98 NL 0.99 OV 0.91 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.95 KP 1.04 ! LA 0.99 MK 1.04 NL 1.07 OV 0.93 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.93 KP 0.99 ! LA 0.95 MK 0.97 NL 1.00 OV 0.88 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.95 KP 1.03 ! LA 0.99 MK 1.05 NL 1.07 OV 0.93 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 0.89 KP 0.99 ! LA 0.99 MK 1.01 NL 1.02 OV 0.87 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.96 KP 1.04 ! LA 1.00 MK 1.03 NL 1.06 OV 0.93 ! PT 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 HN 0.91 KP 0.98 ! LA 0.96 MK 0.98 NL 0.98 OV 0.89 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.95 KP 1.03 ! LA 0.98 MK 1.03 NL 1.06 OV 0.93 ! PT 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.90 KP 0.99 ! LA 0.97 MK 0.98 NL 1.00 OV 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.96 KP 1.03 ! LA 0.99 MK 1.01 NL 1.05 OV 0.93 ! PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.96 HN 0.91 KP 0.99 ! LA 1.00 MK 0.98 NL 0.99 OV 0.89 ! ! ! Fit before self-cal, rms=0.082782Jy sigma=1.555084 ! Fit after self-cal, rms=0.075176Jy sigma=1.384840 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9726 mas, bmaj=1.208 mas, bpa=52.6 degrees ! Estimated noise=0.209696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240284 Jy ! Component: 100 - total flux cleaned = 0.00273896 Jy ! Component: 150 - total flux cleaned = 0.00302991 Jy ! Component: 200 - total flux cleaned = 0.00341363 Jy ! Total flux subtracted in 200 components = 0.00341363 Jy ! Clean residual min=-0.004127 max=0.004337 Jy/beam ! Clean residual mean=0.000007 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.651834 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.651834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074563Jy sigma=1.373026 ! Fit after self-cal, rms=0.074557Jy sigma=1.372564 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074557Jy sigma=1.372564 ! Fit after self-cal, rms=0.060708Jy sigma=1.064178 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=1.212 mas, bpa=53.25 degrees ! Estimated noise=0.210109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00097491 Jy ! Component: 100 - total flux cleaned = -0.00148482 Jy ! Component: 150 - total flux cleaned = -0.00193816 Jy ! Component: 200 - total flux cleaned = -0.00234323 Jy ! Total flux subtracted in 200 components = -0.00234323 Jy ! Clean residual min=-0.002006 max=0.001794 Jy/beam ! Clean residual mean=0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.649491 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 136 components and 0.649491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060280Jy sigma=1.055614 ! Fit after self-cal, rms=0.060305Jy sigma=1.055171 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162779 Jy ! Component: 100 - total flux cleaned = -0.000512196 Jy ! Component: 150 - total flux cleaned = -0.000831853 Jy ! Component: 200 - total flux cleaned = -0.00105093 Jy ! Total flux subtracted in 200 components = -0.00105093 Jy ! Clean residual min=-0.001738 max=0.001665 Jy/beam ! Clean residual mean=0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.64844 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 148 components and 0.64844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060104Jy sigma=1.051174 ! Fit after self-cal, rms=0.060095Jy sigma=1.051058 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060095Jy sigma=1.051058 ! Fit after self-cal, rms=0.060015Jy sigma=1.049185 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.968 mas, bmaj=1.212 mas, bpa=53.28 degrees ! Estimated noise=0.210034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010672 Jy ! Component: 100 - total flux cleaned = -0.00191285 Jy ! Component: 150 - total flux cleaned = -0.00213857 Jy ! Component: 200 - total flux cleaned = -0.00227777 Jy ! Total flux subtracted in 200 components = -0.00227777 Jy ! Clean residual min=-0.001495 max=0.001555 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.646162 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 154 components and 0.646162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059815Jy sigma=1.045234 ! Fit after self-cal, rms=0.059807Jy sigma=1.045120 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819625 Jy ! Component: 100 - total flux cleaned = 0.00075463 Jy ! Component: 150 - total flux cleaned = 0.000634055 Jy ! Component: 200 - total flux cleaned = 0.000579707 Jy ! Total flux subtracted in 200 components = 0.000579707 Jy ! Clean residual min=-0.001375 max=0.001328 Jy/beam ! Clean residual mean=0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.646742 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 163 components and 0.646742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059690Jy sigma=1.042866 ! Fit after self-cal, rms=0.059685Jy sigma=1.042805 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059685Jy sigma=1.042805 ! Fit after self-cal, rms=0.059657Jy sigma=1.042017 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=2.664 mas, bpa=48.94 degrees ! Estimated noise=0.281379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000903607 Jy ! Component: 100 - total flux cleaned = -0.000829644 Jy ! Component: 150 - total flux cleaned = -0.00065224 Jy ! Component: 200 - total flux cleaned = -0.000497939 Jy ! Total flux subtracted in 200 components = -0.000497939 Jy ! Clean residual min=-0.001456 max=0.001638 Jy/beam ! Clean residual mean=0.000005 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.646244 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 187 components and 0.646244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059581Jy sigma=1.040579 ! Fit after self-cal, rms=0.059576Jy sigma=1.040452 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359957 Jy ! Component: 100 - total flux cleaned = 0.000486014 Jy ! Component: 150 - total flux cleaned = 0.000559883 Jy ! Component: 200 - total flux cleaned = 0.00065935 Jy ! Total flux subtracted in 200 components = 0.00065935 Jy ! Clean residual min=-0.001437 max=0.001630 Jy/beam ! Clean residual mean=0.000004 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.646903 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 195 components and 0.646904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059546Jy sigma=1.039891 ! Fit after self-cal, rms=0.059543Jy sigma=1.039844 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9672 mas, bmaj=1.212 mas, bpa=53.31 degrees ! Estimated noise=0.209989 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9672 x 1.212 at 53.31 degrees (North through East) ! Clean map min=-0.0011182 max=0.48092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7483 mas, bmaj=0.953 mas, bpa=54.34 degrees ! Estimated noise=0.301922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.368966 Jy ! Component: 100 - total flux cleaned = 0.46416 Jy ! Component: 150 - total flux cleaned = 0.509327 Jy ! Component: 200 - total flux cleaned = 0.53332 Jy ! Total flux subtracted in 200 components = 0.53332 Jy ! Clean residual min=-0.002751 max=0.011752 Jy/beam ! Clean residual mean=-0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.533321 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.533321 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9672 mas, bmaj=1.212 mas, bpa=53.31 degrees ! Estimated noise=0.209989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230696 Jy ! Component: 100 - total flux cleaned = 0.0382061 Jy ! Component: 150 - total flux cleaned = 0.0490223 Jy ! Component: 200 - total flux cleaned = 0.0575868 Jy ! Total flux subtracted in 200 components = 0.0575868 Jy ! Clean residual min=-0.002016 max=0.005142 Jy/beam ! Clean residual mean=0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.590907 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 48 components and 0.590907 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070286 Jy ! Component: 100 - total flux cleaned = 0.0129323 Jy ! Component: 150 - total flux cleaned = 0.017947 Jy ! Component: 200 - total flux cleaned = 0.0222571 Jy ! Total flux subtracted in 200 components = 0.0222571 Jy ! Clean residual min=-0.001820 max=0.002844 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.613164 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 94 components and 0.613164 Jy ! Inverting map ! Added new window around map position (-0.4, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376708 Jy ! Component: 100 - total flux cleaned = 0.00707076 Jy ! Component: 150 - total flux cleaned = 0.0100027 Jy ! Component: 200 - total flux cleaned = 0.0120114 Jy ! Total flux subtracted in 200 components = 0.0120114 Jy ! Clean residual min=-0.002012 max=0.001920 Jy/beam ! Clean residual mean=0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.625176 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 142 components and 0.625175 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=2.664 mas, bpa=48.94 degrees ! Estimated noise=0.281379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469882 Jy ! Component: 100 - total flux cleaned = 0.00814247 Jy ! Component: 150 - total flux cleaned = 0.010846 Jy ! Component: 200 - total flux cleaned = 0.0130283 Jy ! Total flux subtracted in 200 components = 0.0130283 Jy ! Clean residual min=-0.001531 max=0.001616 Jy/beam ! Clean residual mean=0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.638204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179495 Jy ! Component: 100 - total flux cleaned = 0.00329392 Jy ! Component: 150 - total flux cleaned = 0.00455644 Jy ! Component: 200 - total flux cleaned = 0.00558627 Jy ! Total flux subtracted in 200 components = 0.00558627 Jy ! Clean residual min=-0.001450 max=0.001612 Jy/beam ! Clean residual mean=0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.64379 Jy ! Adding 137 model components to the UV plane model. ! The established model now contains 253 components and 0.64379 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9672 mas, bmaj=1.212 mas, bpa=53.31 degrees ! Estimated noise=0.209989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000868454 Jy ! Component: 100 - total flux cleaned = -0.000476789 Jy ! Component: 150 - total flux cleaned = -4.91039e-05 Jy ! Component: 200 - total flux cleaned = 0.00048308 Jy ! Total flux subtracted in 200 components = 0.00048308 Jy ! Clean residual min=-0.001226 max=0.001138 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.644273 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 263 components and 0.644273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059384Jy sigma=1.036508 ! Fit after self-cal, rms=0.059301Jy sigma=1.035081 wmodel J1223+8040_X_a_map.mod ! Writing 263 model components to file: J1223+8040_X_a_map.mod wobs J1223+8040_X_a_uvs.fits ! Writing UV FITS file: J1223+8040_X_a_uvs.fits wwins J1223+8040_X_a_map.win ! wwins: Wrote 12 windows to J1223+8040_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.01471e-06 Jy ! Component: 100 - total flux cleaned = 0.000139006 Jy ! Component: 150 - total flux cleaned = 0.000257459 Jy ! Component: 200 - total flux cleaned = 0.000450797 Jy ! Component: 250 - total flux cleaned = 0.000583795 Jy ! Component: 300 - total flux cleaned = 0.000751231 Jy ! Component: 350 - total flux cleaned = 0.000879116 Jy ! Component: 400 - total flux cleaned = 0.000987027 Jy ! Component: 450 - total flux cleaned = 0.001058 Jy ! Component: 500 - total flux cleaned = 0.00109296 Jy ! Component: 550 - total flux cleaned = 0.00109299 Jy ! Component: 600 - total flux cleaned = 0.0011102 Jy ! Component: 650 - total flux cleaned = 0.00117781 Jy ! Component: 700 - total flux cleaned = 0.00117762 Jy ! Component: 750 - total flux cleaned = 0.00114433 Jy ! Component: 800 - total flux cleaned = 0.00117738 Jy ! Component: 850 - total flux cleaned = 0.00116096 Jy ! Component: 900 - total flux cleaned = 0.00120973 Jy ! Component: 950 - total flux cleaned = 0.00114507 Jy ! Component: 1000 - total flux cleaned = 0.0011612 Jy ! Component: 1050 - total flux cleaned = 0.00111341 Jy ! Component: 1100 - total flux cleaned = 0.00116098 Jy ! Component: 1150 - total flux cleaned = 0.00111368 Jy ! Component: 1200 - total flux cleaned = 0.00109805 Jy ! Component: 1250 - total flux cleaned = 0.00111375 Jy ! Component: 1300 - total flux cleaned = 0.00109832 Jy ! Component: 1350 - total flux cleaned = 0.00108299 Jy ! Component: 1400 - total flux cleaned = 0.00103725 Jy ! Component: 1450 - total flux cleaned = 0.00109818 Jy ! Component: 1500 - total flux cleaned = 0.00106797 Jy ! Component: 1550 - total flux cleaned = 0.00103793 Jy ! Component: 1600 - total flux cleaned = 0.00105295 Jy ! Component: 1650 - total flux cleaned = 0.00100816 Jy ! Component: 1700 - total flux cleaned = 0.000993376 Jy ! Component: 1750 - total flux cleaned = 0.000949129 Jy ! Component: 1800 - total flux cleaned = 0.000978569 Jy ! Component: 1850 - total flux cleaned = 0.000949359 Jy ! Component: 1900 - total flux cleaned = 0.000934635 Jy ! Component: 1950 - total flux cleaned = 0.000934743 Jy ! Component: 2000 - total flux cleaned = 0.000876868 Jy ! Component: 2050 - total flux cleaned = 0.000920064 Jy ! Component: 2100 - total flux cleaned = 0.000862626 Jy ! Component: 2150 - total flux cleaned = 0.000762519 Jy ! Component: 2200 - total flux cleaned = 0.00083371 Jy ! Component: 2250 - total flux cleaned = 0.000748705 Jy ! Component: 2300 - total flux cleaned = 0.000692118 Jy ! Component: 2350 - total flux cleaned = 0.000692138 Jy ! Component: 2400 - total flux cleaned = 0.000678167 Jy ! Component: 2450 - total flux cleaned = 0.000622323 Jy ! Component: 2500 - total flux cleaned = 0.000636258 Jy ! Component: 2550 - total flux cleaned = 0.000539107 Jy ! Component: 2600 - total flux cleaned = 0.000525271 Jy ! Component: 2650 - total flux cleaned = 0.0004978 Jy ! Component: 2700 - total flux cleaned = 0.000497826 Jy ! Component: 2750 - total flux cleaned = 0.000484087 Jy ! Component: 2800 - total flux cleaned = 0.000429586 Jy ! Component: 2850 - total flux cleaned = 0.000375186 Jy ! Component: 2900 - total flux cleaned = 0.000293964 Jy ! Component: 2950 - total flux cleaned = 0.000212951 Jy ! Component: 3000 - total flux cleaned = 0.000212997 Jy ! Component: 3050 - total flux cleaned = 0.000226421 Jy ! Component: 3100 - total flux cleaned = 0.00017291 Jy ! Component: 3150 - total flux cleaned = 0.000172887 Jy ! Component: 3200 - total flux cleaned = 6.64222e-05 Jy ! Component: 3250 - total flux cleaned = 2.67399e-05 Jy ! Component: 3300 - total flux cleaned = 3.98953e-05 Jy ! Component: 3350 - total flux cleaned = -7.86419e-05 Jy ! Component: 3400 - total flux cleaned = -0.000104936 Jy ! Component: 3450 - total flux cleaned = -0.000118009 Jy ! Component: 3500 - total flux cleaned = -0.000209407 Jy ! Component: 3550 - total flux cleaned = -0.000235457 Jy ! Component: 3600 - total flux cleaned = -0.000300467 Jy ! Component: 3650 - total flux cleaned = -0.00031336 Jy ! Component: 3700 - total flux cleaned = -0.000352076 Jy ! Component: 3750 - total flux cleaned = -0.000429323 Jy ! Component: 3800 - total flux cleaned = -0.000442179 Jy ! Component: 3850 - total flux cleaned = -0.000506302 Jy ! Component: 3900 - total flux cleaned = -0.000595715 Jy ! Component: 3950 - total flux cleaned = -0.000582941 Jy ! Component: 4000 - total flux cleaned = -0.000595708 Jy ! Component: 4050 - total flux cleaned = -0.000557661 Jy ! Total flux subtracted in 4096 components = -0.000684155 Jy ! Clean residual min=-0.000632 max=0.000684 Jy/beam ! Clean residual mean=0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.643589 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 623 components and 0.643589 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1223+8040_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9672 x 1.212 at 53.31 degrees (North through East) ! Clean map min=-0.00098227 max=0.48202 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1223+8040_X_a_map.fits wmodel /vlbi/uf001/uvm//J1223+8040_X_a_map.mod ! Writing 623 model components to file: /vlbi/uf001/uvm//J1223+8040_X_a_map.mod wobs /vlbi/uf001/uvm//J1223+8040_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1223+8040_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1223+8040_X_a_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uvm//J1223+8040_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.482024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222944 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138755 0.138755 0.27751 0.555019 1.11004 2.22008 4.44015 8.88031 17.7606 35.5212 71.0425 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.482 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2162.09 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1223+8040_X_a_dfm.log closed on Sun Jan 13 21:33:32 2019