! Started logfile: /vlbi/uf001/uva//J1221-3423_S_b_dfm.log on Mon Jan 14 01:49:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1221-3423_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1221-3423_S_b_uva.fits ! AN table 1: 29 integrations on 21 of 21 possible baselines. ! AN table 2: 29 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.992611 visibilities/baseline/integration-bin. ! Found source: J1221-3423 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3627 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1221-3423_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003400Jy sigma=13.418868 ! Fit after self-cal, rms=0.897026Jy sigma=11.908423 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=13.49 mas, bpa=-19.91 degrees ! Estimated noise=1.41016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0788181 Jy ! Component: 100 - total flux cleaned = 0.105345 Jy ! Total flux subtracted in 100 components = 0.105345 Jy ! Clean residual min=-0.008700 max=0.013103 Jy/beam ! Clean residual mean=-0.000099 rms=0.002734 Jy/beam ! Combined flux in latest and established models = 0.105345 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.105345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112143Jy sigma=1.368290 ! Fit after self-cal, rms=0.112067Jy sigma=1.365179 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=15.16 mas, bpa=-19.91 degrees ! Estimated noise=0.917185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238749 Jy ! Component: 100 - total flux cleaned = 0.0360401 Jy ! Component: 150 - total flux cleaned = 0.0426693 Jy ! Component: 200 - total flux cleaned = 0.046406 Jy ! Total flux subtracted in 200 components = 0.046406 Jy ! Clean residual min=-0.006472 max=0.005754 Jy/beam ! Clean residual mean=-0.000044 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.151751 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 90 components and 0.151751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107811Jy sigma=1.286330 ! Fit after self-cal, rms=0.107887Jy sigma=1.284583 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.266 x 15.16 at -19.91 degrees (North through East) ! Clean map min=-0.0062965 max=0.10661 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.15 KP 1.00 LA 0.93 ! MK 1.02 NL 1.21 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.87 KP 1.04 LA 1.01 ! MK 1.09 NL 1.16 PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.00 KP 0.98 LA 0.98 ! MK 0.99 NL 0.74 PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 0.90 KP 0.94 LA 0.97 ! MK 0.90 NL 0.91 PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.08 KP 1.04 LA 0.98 ! MK 1.01 NL 1.04 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.84 KP 1.03 LA 0.96 ! MK 1.02 NL 1.30 PT 1.05 ! ! ! Fit before self-cal, rms=0.107887Jy sigma=1.284583 ! Fit after self-cal, rms=0.111653Jy sigma=1.266199 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=15.3 mas, bpa=-20 degrees ! Estimated noise=0.91032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332194 Jy ! Component: 100 - total flux cleaned = 0.000177663 Jy ! Component: 150 - total flux cleaned = 0.000122996 Jy ! Component: 200 - total flux cleaned = 9.82549e-05 Jy ! Total flux subtracted in 200 components = 9.82549e-05 Jy ! Clean residual min=-0.005081 max=0.003809 Jy/beam ! Clean residual mean=-0.000035 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.151849 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.151849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.111634Jy sigma=1.266004 ! Fit after self-cal, rms=0.112005Jy sigma=1.264660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112005Jy sigma=1.264660 ! Fit after self-cal, rms=0.112922Jy sigma=1.264535 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=15.29 mas, bpa=-20.03 degrees ! Estimated noise=0.909945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336873 Jy ! Component: 100 - total flux cleaned = 0.00022679 Jy ! Component: 150 - total flux cleaned = 0.000177576 Jy ! Component: 200 - total flux cleaned = 0.000177563 Jy ! Total flux subtracted in 200 components = 0.000177563 Jy ! Clean residual min=-0.005205 max=0.003817 Jy/beam ! Clean residual mean=-0.000037 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.152027 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.152027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112906Jy sigma=1.264399 ! Fit after self-cal, rms=0.112957Jy sigma=1.264354 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.1329e-05 Jy ! Component: 100 - total flux cleaned = 2.01222e-05 Jy ! Component: 150 - total flux cleaned = -1.4215e-06 Jy ! Component: 200 - total flux cleaned = -2.13088e-05 Jy ! Total flux subtracted in 200 components = -2.13088e-05 Jy ! Clean residual min=-0.005236 max=0.003782 Jy/beam ! Clean residual mean=-0.000037 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.152005 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 0.152005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112943Jy sigma=1.264259 ! Fit after self-cal, rms=0.112953Jy sigma=1.264231 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112953Jy sigma=1.264231 ! Fit after self-cal, rms=0.113600Jy sigma=1.264228 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=15.27 mas, bpa=-20.09 degrees ! Estimated noise=0.910545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530442 Jy ! Component: 100 - total flux cleaned = 0.00053046 Jy ! Component: 150 - total flux cleaned = 0.00050901 Jy ! Component: 200 - total flux cleaned = 0.000508213 Jy ! Total flux subtracted in 200 components = 0.000508213 Jy ! Clean residual min=-0.005267 max=0.003722 Jy/beam ! Clean residual mean=-0.000038 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.152514 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 115 components and 0.152514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113587Jy sigma=1.264122 ! Fit after self-cal, rms=0.113604Jy sigma=1.264096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.83471e-05 Jy ! Component: 100 - total flux cleaned = 2.70783e-05 Jy ! Component: 150 - total flux cleaned = 7.26671e-06 Jy ! Component: 200 - total flux cleaned = -1.0925e-05 Jy ! Total flux subtracted in 200 components = -1.0925e-05 Jy ! Clean residual min=-0.005307 max=0.003698 Jy/beam ! Clean residual mean=-0.000038 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.152503 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 0.152503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113594Jy sigma=1.264028 ! Fit after self-cal, rms=0.113600Jy sigma=1.264009 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113600Jy sigma=1.264009 ! Fit after self-cal, rms=0.113833Jy sigma=1.263998 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.778 mas, bmaj=28.55 mas, bpa=-8.323 degrees ! Estimated noise=1.09753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285305 Jy ! Component: 100 - total flux cleaned = 0.000234906 Jy ! Component: 150 - total flux cleaned = 0.00019361 Jy ! Component: 200 - total flux cleaned = 0.000158518 Jy ! Total flux subtracted in 200 components = 0.000158518 Jy ! Clean residual min=-0.006068 max=0.003652 Jy/beam ! Clean residual mean=-0.000067 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.152661 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 123 components and 0.152661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113831Jy sigma=1.263944 ! Fit after self-cal, rms=0.113830Jy sigma=1.263929 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110018 Jy ! Component: 100 - total flux cleaned = 6.23432e-05 Jy ! Component: 150 - total flux cleaned = 2.13779e-05 Jy ! Component: 200 - total flux cleaned = -1.51678e-05 Jy ! Total flux subtracted in 200 components = -1.51678e-05 Jy ! Clean residual min=-0.006100 max=0.003710 Jy/beam ! Clean residual mean=-0.000068 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.152646 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 127 components and 0.152646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113831Jy sigma=1.263883 ! Fit after self-cal, rms=0.113827Jy sigma=1.263875 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=15.24 mas, bpa=-20.16 degrees ! Estimated noise=0.910525 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 15.24 at -20.16 degrees (North through East) ! Clean map min=-0.0051918 max=0.10508 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=13.47 mas, bpa=-20.05 degrees ! Estimated noise=1.41389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785218 Jy ! Component: 100 - total flux cleaned = 0.107116 Jy ! Component: 150 - total flux cleaned = 0.123865 Jy ! Component: 200 - total flux cleaned = 0.1343 Jy ! Total flux subtracted in 200 components = 0.1343 Jy ! Clean residual min=-0.006462 max=0.005508 Jy/beam ! Clean residual mean=-0.000055 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.1343 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.1343 Jy ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=15.24 mas, bpa=-20.16 degrees ! Estimated noise=0.910525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00908733 Jy ! Component: 100 - total flux cleaned = 0.0136631 Jy ! Component: 150 - total flux cleaned = 0.0161665 Jy ! Component: 200 - total flux cleaned = 0.0175913 Jy ! Total flux subtracted in 200 components = 0.0175913 Jy ! Clean residual min=-0.005288 max=0.003636 Jy/beam ! Clean residual mean=-0.000042 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.151891 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 74 components and 0.151891 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.778 mas, bmaj=28.55 mas, bpa=-8.323 degrees ! Estimated noise=1.09753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436123 Jy ! Component: 100 - total flux cleaned = 0.00051191 Jy ! Component: 150 - total flux cleaned = 0.00056753 Jy ! Component: 200 - total flux cleaned = 0.000619928 Jy ! Total flux subtracted in 200 components = 0.000619928 Jy ! Clean residual min=-0.006133 max=0.003705 Jy/beam ! Clean residual mean=-0.000068 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.152511 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.3347e-05 Jy ! Component: 100 - total flux cleaned = 5.60277e-05 Jy ! Component: 150 - total flux cleaned = 8.38603e-05 Jy ! Component: 200 - total flux cleaned = 0.000103029 Jy ! Total flux subtracted in 200 components = 0.000103029 Jy ! Clean residual min=-0.006120 max=0.003670 Jy/beam ! Clean residual mean=-0.000068 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.152614 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.152614 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=15.24 mas, bpa=-20.16 degrees ! Estimated noise=0.910525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.5469e-05 Jy ! Component: 100 - total flux cleaned = -6.674e-06 Jy ! Component: 150 - total flux cleaned = 7.1299e-05 Jy ! Component: 200 - total flux cleaned = 0.000118215 Jy ! Total flux subtracted in 200 components = 0.000118215 Jy ! Clean residual min=-0.005298 max=0.003683 Jy/beam ! Clean residual mean=-0.000040 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.152733 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 0.152733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113845Jy sigma=1.263889 ! Fit after self-cal, rms=0.113836Jy sigma=1.263833 wmodel J1221-3423_S_b_map.mod ! Writing 105 model components to file: J1221-3423_S_b_map.mod wobs J1221-3423_S_b_uvs.fits ! Writing UV FITS file: J1221-3423_S_b_uvs.fits wwins J1221-3423_S_b_map.win ! wwins: Wrote 1 windows to J1221-3423_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224041 Jy ! Component: 100 - total flux cleaned = -0.00410779 Jy ! Component: 150 - total flux cleaned = -0.00544334 Jy ! Component: 200 - total flux cleaned = -0.00624303 Jy ! Component: 250 - total flux cleaned = -0.00653049 Jy ! Component: 300 - total flux cleaned = -0.00663978 Jy ! Component: 350 - total flux cleaned = -0.00679701 Jy ! Component: 400 - total flux cleaned = -0.00684751 Jy ! Component: 450 - total flux cleaned = -0.00694502 Jy ! Component: 500 - total flux cleaned = -0.00680607 Jy ! Component: 550 - total flux cleaned = -0.0066725 Jy ! Component: 600 - total flux cleaned = -0.00658616 Jy ! Component: 650 - total flux cleaned = -0.00646125 Jy ! Component: 700 - total flux cleaned = -0.00646113 Jy ! Component: 750 - total flux cleaned = -0.0065004 Jy ! Component: 800 - total flux cleaned = -0.00649998 Jy ! Component: 850 - total flux cleaned = -0.00646319 Jy ! Component: 900 - total flux cleaned = -0.00653638 Jy ! Component: 950 - total flux cleaned = -0.00660792 Jy ! Component: 1000 - total flux cleaned = -0.00667579 Jy ! Component: 1050 - total flux cleaned = -0.00654108 Jy ! Component: 1100 - total flux cleaned = -0.0065422 Jy ! Component: 1150 - total flux cleaned = -0.00657417 Jy ! Component: 1200 - total flux cleaned = -0.00644759 Jy ! Component: 1250 - total flux cleaned = -0.00644763 Jy ! Component: 1300 - total flux cleaned = -0.00635712 Jy ! Component: 1350 - total flux cleaned = -0.00632831 Jy ! Component: 1400 - total flux cleaned = -0.00635751 Jy ! Component: 1450 - total flux cleaned = -0.00632855 Jy ! Component: 1500 - total flux cleaned = -0.0064126 Jy ! Component: 1550 - total flux cleaned = -0.00646749 Jy ! Component: 1600 - total flux cleaned = -0.00654889 Jy ! Component: 1650 - total flux cleaned = -0.00660216 Jy ! Component: 1700 - total flux cleaned = -0.00657564 Jy ! Component: 1750 - total flux cleaned = -0.00662785 Jy ! Component: 1800 - total flux cleaned = -0.00667853 Jy ! Component: 1850 - total flux cleaned = -0.00677921 Jy ! Component: 1900 - total flux cleaned = -0.00680376 Jy ! Component: 1950 - total flux cleaned = -0.00687684 Jy ! Component: 2000 - total flux cleaned = -0.00694925 Jy ! Component: 2050 - total flux cleaned = -0.00702085 Jy ! Component: 2100 - total flux cleaned = -0.0071383 Jy ! Component: 2150 - total flux cleaned = -0.00723092 Jy ! Component: 2200 - total flux cleaned = -0.00734543 Jy ! Component: 2250 - total flux cleaned = -0.00748106 Jy ! Component: 2300 - total flux cleaned = -0.00763758 Jy ! Component: 2350 - total flux cleaned = -0.00777026 Jy ! Component: 2400 - total flux cleaned = -0.00794502 Jy ! Component: 2450 - total flux cleaned = -0.00809623 Jy ! Component: 2500 - total flux cleaned = -0.00816032 Jy ! Component: 2550 - total flux cleaned = -0.0083511 Jy ! Component: 2600 - total flux cleaned = -0.00845614 Jy ! Component: 2650 - total flux cleaned = -0.00858119 Jy ! Component: 2700 - total flux cleaned = -0.00880808 Jy ! Component: 2750 - total flux cleaned = -0.00899213 Jy ! Component: 2800 - total flux cleaned = -0.00919522 Jy ! Component: 2850 - total flux cleaned = -0.00939671 Jy ! Component: 2900 - total flux cleaned = -0.00953683 Jy ! Component: 2950 - total flux cleaned = -0.00981467 Jy ! Component: 3000 - total flux cleaned = -0.0099918 Jy ! Component: 3050 - total flux cleaned = -0.0101678 Jy ! Component: 3100 - total flux cleaned = -0.0103231 Jy ! Component: 3150 - total flux cleaned = -0.0104967 Jy ! Component: 3200 - total flux cleaned = -0.0106693 Jy ! Component: 3250 - total flux cleaned = -0.010879 Jy ! Component: 3300 - total flux cleaned = -0.0110493 Jy ! Component: 3350 - total flux cleaned = -0.0111999 Jy ! Component: 3400 - total flux cleaned = -0.0113311 Jy ! Component: 3450 - total flux cleaned = -0.0114988 Jy ! Component: 3500 - total flux cleaned = -0.0116654 Jy ! Component: 3550 - total flux cleaned = -0.0118312 Jy ! Component: 3600 - total flux cleaned = -0.011996 Jy ! Component: 3650 - total flux cleaned = -0.0121418 Jy ! Component: 3700 - total flux cleaned = -0.0122689 Jy ! Component: 3750 - total flux cleaned = -0.0123954 Jy ! Component: 3800 - total flux cleaned = -0.0125035 Jy ! Component: 3850 - total flux cleaned = -0.0126112 Jy ! Component: 3900 - total flux cleaned = -0.0127366 Jy ! Component: 3950 - total flux cleaned = -0.0127723 Jy ! Component: 4000 - total flux cleaned = -0.0128436 Jy ! Component: 4050 - total flux cleaned = -0.0128614 Jy ! Total flux subtracted in 4096 components = -0.0128792 Jy ! Clean residual min=-0.001101 max=0.001293 Jy/beam ! Clean residual mean=-0.000007 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.139853 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 347 components and 0.139853 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1221-3423_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 15.24 at -20.16 degrees (North through East) ! Clean map min=-0.0027894 max=0.10405 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1221-3423_S_b_map.fits wmodel /vlbi/uf001/uva//J1221-3423_S_b_map.mod ! Writing 347 model components to file: /vlbi/uf001/uva//J1221-3423_S_b_map.mod wobs /vlbi/uf001/uva//J1221-3423_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1221-3423_S_b_uvs.fits wwins /vlbi/uf001/uva//J1221-3423_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1221-3423_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299456 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.863429 0.863429 1.72686 3.45372 6.90743 13.8149 27.6297 55.2595 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 347.451 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1221-3423_S_b_dfm.log closed on Mon Jan 14 01:49:51 2019