! Started logfile: /vlbi/uf001/uva//J1220+3343_S_dfm.log on Mon Jan 14 01:48:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1220+3343_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1220+3343_S_uva.fits
! AN table 1: 80 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.636111 visibilities/baseline/integration-bin.
! Found source: J1220+3343
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6870 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1220+3343_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 258 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 258 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 258 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011186Jy  sigma=25.217120
! Fit after  self-cal, rms=0.916746Jy  sigma=22.921603
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=5.299 mas, bpa=-5.14 degrees
! Estimated noise=0.488586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628241 Jy
! Component: 100  -  total flux cleaned = 0.0837738 Jy
! Total flux subtracted in 100 components = 0.0837738 Jy
! Clean residual min=-0.004896 max=0.016153 Jy/beam
! Clean residual mean=0.000006 rms=0.001655 Jy/beam
! Combined flux in latest and established models = 0.0837738 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0837738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061113Jy  sigma=1.464326
! Fit after  self-cal, rms=0.060537Jy  sigma=1.449733
! Inverting map 
! Added new window around map position (-3, -8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152473 Jy
! Component: 100  -  total flux cleaned = 0.0245641 Jy
! Total flux subtracted in 100 components = 0.0245641 Jy
! Clean residual min=-0.003782 max=0.006773 Jy/beam
! Clean residual mean=0.000009 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.108338 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.108338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055772Jy  sigma=1.329120
! Fit after  self-cal, rms=0.055523Jy  sigma=1.323352
! Inverting map 
! Added new window around map position (-5, -16).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782104 Jy
! Component: 100  -  total flux cleaned = 0.0131457 Jy
! Total flux subtracted in 100 components = 0.0131457 Jy
! Clean residual min=-0.002998 max=0.003853 Jy/beam
! Clean residual mean=0.000009 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.121484 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.121484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054174Jy  sigma=1.289067
! Fit after  self-cal, rms=0.054103Jy  sigma=1.287645
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.594 mas, bmaj=6.025 mas, bpa=-5.402 degrees
! Estimated noise=0.351506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00519162 Jy
! Component: 100  -  total flux cleaned = 0.00865929 Jy
! Component: 150  -  total flux cleaned = 0.0110922 Jy
! Component: 200  -  total flux cleaned = 0.0128535 Jy
! Total flux subtracted in 200 components = 0.0128535 Jy
! Clean residual min=-0.002367 max=0.003044 Jy/beam
! Clean residual mean=0.000013 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.134337 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 76 components and 0.134337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053514Jy  sigma=1.272059
! Fit after  self-cal, rms=0.053452Jy  sigma=1.270752
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.594 x 6.025 at -5.402 degrees (North through East)
! Clean map  min=-0.0022551  max=0.080724 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.01     KP        1.02     
!   LA        0.90     MK        1.05     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.98     KP        1.01     
!   LA        0.93     MK        1.01     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.053452Jy  sigma=1.270752
! Fit after  self-cal, rms=0.052722Jy  sigma=1.266038
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.601 mas, bmaj=6.042 mas, bpa=-5.099 degrees
! Estimated noise=0.347458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031405 Jy
! Component: 100  -  total flux cleaned = 0.00497106 Jy
! Component: 150  -  total flux cleaned = 0.00631329 Jy
! Component: 200  -  total flux cleaned = 0.00731969 Jy
! Total flux subtracted in 200 components = 0.00731969 Jy
! Clean residual min=-0.001862 max=0.002071 Jy/beam
! Clean residual mean=0.000008 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.141657 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 106 components and 0.141657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052515Jy  sigma=1.260520
! Fit after  self-cal, rms=0.052505Jy  sigma=1.259924
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052505Jy  sigma=1.259924
! Fit after  self-cal, rms=0.052493Jy  sigma=1.253726
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.594 mas, bmaj=6.015 mas, bpa=-5.598 degrees
! Estimated noise=0.34727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000923432 Jy
! Component: 100  -  total flux cleaned = 0.00143135 Jy
! Component: 150  -  total flux cleaned = 0.00176886 Jy
! Component: 200  -  total flux cleaned = 0.00201153 Jy
! Total flux subtracted in 200 components = 0.00201153 Jy
! Clean residual min=-0.001907 max=0.001691 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.143668 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.143668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052466Jy  sigma=1.253140
! Fit after  self-cal, rms=0.052468Jy  sigma=1.252983
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026176 Jy
! Component: 100  -  total flux cleaned = 0.000403192 Jy
! Component: 150  -  total flux cleaned = 0.000466261 Jy
! Component: 200  -  total flux cleaned = 0.000495547 Jy
! Total flux subtracted in 200 components = 0.000495547 Jy
! Clean residual min=-0.001873 max=0.001658 Jy/beam
! Clean residual mean=0.000000 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.144164 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.144164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052458Jy  sigma=1.252746
! Fit after  self-cal, rms=0.052457Jy  sigma=1.252724
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052457Jy  sigma=1.252724
! Fit after  self-cal, rms=0.052490Jy  sigma=1.252681
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.594 mas, bmaj=6.012 mas, bpa=-5.749 degrees
! Estimated noise=0.347151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295781 Jy
! Component: 100  -  total flux cleaned = 0.000430967 Jy
! Component: 150  -  total flux cleaned = 0.000471142 Jy
! Component: 200  -  total flux cleaned = 0.000507549 Jy
! Total flux subtracted in 200 components = 0.000507549 Jy
! Clean residual min=-0.001866 max=0.001630 Jy/beam
! Clean residual mean=0.000000 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.144671 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 144 components and 0.144671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052482Jy  sigma=1.252520
! Fit after  self-cal, rms=0.052483Jy  sigma=1.252500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107454 Jy
! Component: 100  -  total flux cleaned = 0.000167929 Jy
! Component: 150  -  total flux cleaned = 0.000201138 Jy
! Component: 200  -  total flux cleaned = 0.000222125 Jy
! Total flux subtracted in 200 components = 0.000222125 Jy
! Clean residual min=-0.001846 max=0.001631 Jy/beam
! Clean residual mean=0.000000 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.144894 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 149 components and 0.144894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052478Jy  sigma=1.252392
! Fit after  self-cal, rms=0.052478Jy  sigma=1.252384
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052478Jy  sigma=1.252384
! Fit after  self-cal, rms=0.052480Jy  sigma=1.252363
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.87 mas, bmaj=9.424 mas, bpa=-7.485 degrees
! Estimated noise=0.439905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323067 Jy
! Component: 100  -  total flux cleaned = 0.000481897 Jy
! Component: 150  -  total flux cleaned = 0.000505737 Jy
! Component: 200  -  total flux cleaned = 0.000526383 Jy
! Total flux subtracted in 200 components = 0.000526383 Jy
! Clean residual min=-0.001899 max=0.002163 Jy/beam
! Clean residual mean=-0.000000 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.14542 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 177 components and 0.14542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052478Jy  sigma=1.252276
! Fit after  self-cal, rms=0.052478Jy  sigma=1.252256
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.49503e-05 Jy
! Component: 100  -  total flux cleaned = 6.67095e-05 Jy
! Component: 150  -  total flux cleaned = 6.64816e-05 Jy
! Component: 200  -  total flux cleaned = 8.29897e-05 Jy
! Total flux subtracted in 200 components = 8.29897e-05 Jy
! Clean residual min=-0.001907 max=0.002153 Jy/beam
! Clean residual mean=-0.000000 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.145503 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 182 components and 0.145503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052477Jy  sigma=1.252222
! Fit after  self-cal, rms=0.052477Jy  sigma=1.252210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.593 mas, bmaj=6.01 mas, bpa=-5.85 degrees
! Estimated noise=0.347032 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.593 x 6.01 at -5.85 degrees (North through East)
! Clean map  min=-0.00175  max=0.07983 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.032 mas, bmaj=5.289 mas, bpa=-5.591 degrees
! Estimated noise=0.481831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0622452 Jy
! Component: 100  -  total flux cleaned = 0.0858591 Jy
! Component: 150  -  total flux cleaned = 0.100426 Jy
! Component: 200  -  total flux cleaned = 0.110376 Jy
! Total flux subtracted in 200 components = 0.110376 Jy
! Clean residual min=-0.003385 max=0.005521 Jy/beam
! Clean residual mean=0.000008 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.110376 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.110376 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.593 mas, bmaj=6.01 mas, bpa=-5.85 degrees
! Estimated noise=0.347032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00854285 Jy
! Component: 100  -  total flux cleaned = 0.0143611 Jy
! Component: 150  -  total flux cleaned = 0.0187074 Jy
! Component: 200  -  total flux cleaned = 0.0220355 Jy
! Total flux subtracted in 200 components = 0.0220355 Jy
! Clean residual min=-0.002261 max=0.001934 Jy/beam
! Clean residual mean=0.000006 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.132411 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 85 components and 0.132411 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.87 mas, bmaj=9.424 mas, bpa=-7.485 degrees
! Estimated noise=0.439905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420129 Jy
! Component: 100  -  total flux cleaned = 0.00671159 Jy
! Component: 150  -  total flux cleaned = 0.00846264 Jy
! Component: 200  -  total flux cleaned = 0.00977922 Jy
! Total flux subtracted in 200 components = 0.00977922 Jy
! Clean residual min=-0.001890 max=0.002257 Jy/beam
! Clean residual mean=0.000002 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.14219 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010108 Jy
! Component: 100  -  total flux cleaned = 0.00179248 Jy
! Component: 150  -  total flux cleaned = 0.00237745 Jy
! Component: 200  -  total flux cleaned = 0.00265419 Jy
! Total flux subtracted in 200 components = 0.00265419 Jy
! Clean residual min=-0.001939 max=0.002133 Jy/beam
! Clean residual mean=-0.000000 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.144844 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 185 components and 0.144844 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.593 mas, bmaj=6.01 mas, bpa=-5.85 degrees
! Estimated noise=0.347032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293807 Jy
! Component: 100  -  total flux cleaned = 0.000603064 Jy
! Component: 150  -  total flux cleaned = 0.000724652 Jy
! Component: 200  -  total flux cleaned = 0.000855354 Jy
! Total flux subtracted in 200 components = 0.000855354 Jy
! Clean residual min=-0.001814 max=0.001661 Jy/beam
! Clean residual mean=-0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.1457 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 206 components and 0.1457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052503Jy  sigma=1.253057
! Fit after  self-cal, rms=0.052495Jy  sigma=1.252936
wmodel J1220+3343_S_map.mod
! Writing 206 model components to file: J1220+3343_S_map.mod
wobs   J1220+3343_S_uvs.fits
! Writing UV FITS file: J1220+3343_S_uvs.fits
wwins  J1220+3343_S_map.win
! wwins: Wrote 4 windows to J1220+3343_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.18261e-05 Jy
! Component: 100  -  total flux cleaned = 4.02332e-05 Jy
! Component: 150  -  total flux cleaned = 1.13592e-05 Jy
! Component: 200  -  total flux cleaned = 1.13253e-05 Jy
! Component: 250  -  total flux cleaned = 1.13228e-05 Jy
! Component: 300  -  total flux cleaned = -1.54684e-05 Jy
! Component: 350  -  total flux cleaned = 9.74818e-06 Jy
! Component: 400  -  total flux cleaned = -9.01446e-05 Jy
! Component: 450  -  total flux cleaned = -1.69547e-05 Jy
! Component: 500  -  total flux cleaned = -1.692e-05 Jy
! Component: 550  -  total flux cleaned = 5.33243e-05 Jy
! Component: 600  -  total flux cleaned = 9.92034e-05 Jy
! Component: 650  -  total flux cleaned = 0.000210975 Jy
! Component: 700  -  total flux cleaned = 0.000189063 Jy
! Component: 750  -  total flux cleaned = 0.000189041 Jy
! Component: 800  -  total flux cleaned = 0.000188924 Jy
! Component: 850  -  total flux cleaned = 0.000168437 Jy
! Component: 900  -  total flux cleaned = 0.000107353 Jy
! Component: 950  -  total flux cleaned = 7.03509e-06 Jy
! Component: 1000  -  total flux cleaned = -5.18799e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000109862 Jy
! Component: 1100  -  total flux cleaned = -0.000205876 Jy
! Component: 1150  -  total flux cleaned = -0.000206284 Jy
! Component: 1200  -  total flux cleaned = -0.000299327 Jy
! Component: 1250  -  total flux cleaned = -0.000299204 Jy
! Component: 1300  -  total flux cleaned = -0.000389793 Jy
! Component: 1350  -  total flux cleaned = -0.000424869 Jy
! Component: 1400  -  total flux cleaned = -0.000389399 Jy
! Component: 1450  -  total flux cleaned = -0.000389677 Jy
! Component: 1500  -  total flux cleaned = -0.000458789 Jy
! Component: 1550  -  total flux cleaned = -0.00049253 Jy
! Component: 1600  -  total flux cleaned = -0.000492524 Jy
! Component: 1650  -  total flux cleaned = -0.000442491 Jy
! Component: 1700  -  total flux cleaned = -0.000409462 Jy
! Component: 1750  -  total flux cleaned = -0.000409412 Jy
! Component: 1800  -  total flux cleaned = -0.000409419 Jy
! Component: 1850  -  total flux cleaned = -0.000409391 Jy
! Component: 1900  -  total flux cleaned = -0.000377782 Jy
! Component: 1950  -  total flux cleaned = -0.000315328 Jy
! Component: 2000  -  total flux cleaned = -0.00026911 Jy
! Component: 2050  -  total flux cleaned = -0.00022331 Jy
! Component: 2100  -  total flux cleaned = -0.000208175 Jy
! Component: 2150  -  total flux cleaned = -0.000118225 Jy
! Component: 2200  -  total flux cleaned = -5.89349e-05 Jy
! Component: 2250  -  total flux cleaned = -4.40523e-05 Jy
! Component: 2300  -  total flux cleaned = 4.34788e-05 Jy
! Component: 2350  -  total flux cleaned = 0.00011573 Jy
! Component: 2400  -  total flux cleaned = 0.000173114 Jy
! Component: 2450  -  total flux cleaned = 0.000244085 Jy
! Component: 2500  -  total flux cleaned = 0.000243953 Jy
! Component: 2550  -  total flux cleaned = 0.000355343 Jy
! Component: 2600  -  total flux cleaned = 0.000382921 Jy
! Component: 2650  -  total flux cleaned = 0.000423873 Jy
! Component: 2700  -  total flux cleaned = 0.000450976 Jy
! Component: 2750  -  total flux cleaned = 0.000504851 Jy
! Component: 2800  -  total flux cleaned = 0.000491721 Jy
! Component: 2850  -  total flux cleaned = 0.000518202 Jy
! Component: 2900  -  total flux cleaned = 0.000596971 Jy
! Component: 2950  -  total flux cleaned = 0.000570973 Jy
! Component: 3000  -  total flux cleaned = 0.000596757 Jy
! Component: 3050  -  total flux cleaned = 0.00060969 Jy
! Component: 3100  -  total flux cleaned = 0.000584416 Jy
! Component: 3150  -  total flux cleaned = 0.000634835 Jy
! Component: 3200  -  total flux cleaned = 0.000672409 Jy
! Component: 3250  -  total flux cleaned = 0.000722194 Jy
! Component: 3300  -  total flux cleaned = 0.000734583 Jy
! Component: 3350  -  total flux cleaned = 0.000734608 Jy
! Component: 3400  -  total flux cleaned = 0.000771131 Jy
! Component: 3450  -  total flux cleaned = 0.000746884 Jy
! Component: 3500  -  total flux cleaned = 0.000842816 Jy
! Component: 3550  -  total flux cleaned = 0.000818893 Jy
! Component: 3600  -  total flux cleaned = 0.000866153 Jy
! Component: 3650  -  total flux cleaned = 0.000889619 Jy
! Component: 3700  -  total flux cleaned = 0.000877895 Jy
! Component: 3750  -  total flux cleaned = 0.000889413 Jy
! Component: 3800  -  total flux cleaned = 0.000958303 Jy
! Component: 3850  -  total flux cleaned = 0.000935512 Jy
! Component: 3900  -  total flux cleaned = 0.000981006 Jy
! Component: 3950  -  total flux cleaned = 0.00101469 Jy
! Component: 4000  -  total flux cleaned = 0.00103699 Jy
! Component: 4050  -  total flux cleaned = 0.00103702 Jy
! Total flux subtracted in 4096 components = 0.00110333 Jy
! Clean residual min=-0.000825 max=0.000653 Jy/beam
! Clean residual mean=0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.146803 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 526 components and 0.146803 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1220+3343_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.593 x 6.01 at -5.85 degrees (North through East)
! Clean map  min=-0.0011764  max=0.079837 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1220+3343_S_map.fits
wmodel /vlbi/uf001/uva//J1220+3343_S_map.mod
! Writing 526 model components to file: /vlbi/uf001/uva//J1220+3343_S_map.mod
wobs   /vlbi/uf001/uva//J1220+3343_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1220+3343_S_uvs.fits
wwins  /vlbi/uf001/uva//J1220+3343_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1220+3343_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0798373 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000204807 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.769592 0.769592 1.53918 3.07837 6.15674 12.3135 24.627 49.2539 98.5078
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.079 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  389.816 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1220+3343_S_dfm.log closed on Mon Jan 14 01:48:06 2019