! Started logfile: /vlbi/uf001/uvm//J1215-1731_X_b_dfm.log on Sun Jan 13 21:32:39 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1215-1731_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1215-1731_X_b_uvm.fits ! AN table 1: 13 integrations on 6 of 6 possible baselines. ! AN table 2: 35 integrations on 45 of 45 possible baselines. ! AN table 3: 11 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.752669 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15228 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1215-1731_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.394407Jy sigma=19.370866 ! Fit after self-cal, rms=0.249584Jy sigma=3.419259 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6337 mas, bmaj=1.619 mas, bpa=-5.18 degrees ! Estimated noise=0.786035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.653823 Jy ! Component: 100 - total flux cleaned = 0.811989 Jy ! Total flux subtracted in 100 components = 0.811989 Jy ! Clean residual min=-0.033096 max=0.066295 Jy/beam ! Clean residual mean=0.000034 rms=0.006016 Jy/beam ! Combined flux in latest and established models = 0.811989 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.811989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.259710Jy sigma=3.338279 ! Fit after self-cal, rms=0.259657Jy sigma=3.337979 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0750838 Jy ! Component: 100 - total flux cleaned = 0.118841 Jy ! Total flux subtracted in 100 components = 0.118841 Jy ! Clean residual min=-0.035071 max=0.068077 Jy/beam ! Clean residual mean=0.000024 rms=0.004924 Jy/beam ! Combined flux in latest and established models = 0.93083 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.93083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213505Jy sigma=2.738263 ! Fit after self-cal, rms=0.213402Jy sigma=2.737847 ! Inverting map ! Added new window around map position (2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607018 Jy ! Component: 100 - total flux cleaned = 0.0971614 Jy ! Total flux subtracted in 100 components = 0.0971614 Jy ! Clean residual min=-0.031847 max=0.038235 Jy/beam ! Clean residual mean=0.000020 rms=0.003985 Jy/beam ! Combined flux in latest and established models = 1.02799 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 1.02799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175703Jy sigma=2.242214 ! Fit after self-cal, rms=0.173791Jy sigma=2.208102 ! Inverting map ! Added new window around map position (1.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383383 Jy ! Component: 100 - total flux cleaned = 0.0648068 Jy ! Total flux subtracted in 100 components = 0.0648068 Jy ! Clean residual min=-0.028687 max=0.026157 Jy/beam ! Clean residual mean=0.000018 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 1.0928 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 1.0928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154177Jy sigma=1.948480 ! Fit after self-cal, rms=0.153479Jy sigma=1.935420 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8128 mas, bmaj=1.94 mas, bpa=-3.146 degrees ! Estimated noise=0.575012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048228 Jy ! Component: 100 - total flux cleaned = 0.0809211 Jy ! Component: 150 - total flux cleaned = 0.105015 Jy ! Component: 200 - total flux cleaned = 0.123019 Jy ! Total flux subtracted in 200 components = 0.123019 Jy ! Clean residual min=-0.019443 max=0.031475 Jy/beam ! Clean residual mean=0.000010 rms=0.004897 Jy/beam ! Combined flux in latest and established models = 1.21582 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 51 components and 1.21582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130457Jy sigma=1.654441 ! Fit after self-cal, rms=0.129032Jy sigma=1.631400 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8128 x 1.94 at -3.146 degrees (North through East) ! Clean map min=-0.01732 max=0.88868 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 1.58 NL 1.02 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 1.06 KP 0.98 ! LA 1.00 MK 1.04 NL 1.02 OV 0.90 ! PT 0.92 SC 0.97 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 1.60 NL 1.00 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 1.08 KP 0.97 ! LA 1.00 MK 1.03 NL 1.03 OV 0.91 ! PT 0.92 SC 0.97 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.56 NL 1.07 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 1.06 KP 0.98 ! LA 1.01 MK 1.03 NL 1.02 OV 0.91 ! PT 0.93 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.50 NL 1.08 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 1.06 KP 0.99 ! LA 0.99 MK 1.04 NL 1.03 OV 0.90 ! PT 0.92 SC 0.97 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 1.46 NL 1.02 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 1.04 KP 0.99 ! LA 1.00 MK 1.03 NL 1.02 OV 0.91 ! PT 0.92 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 1.45 NL 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 1.04 KP 0.99 ! LA 1.01 MK 1.04 NL 1.02 OV 0.90 ! PT 0.93 SC 0.99 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.47 NL 1.06 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 1.07 KP 0.99 ! LA 1.00 MK 1.02 NL 1.04 OV 0.91 ! PT 0.93 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 1.43 NL 1.02 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 1.05 KP 0.98 ! LA 1.00 MK 1.03 NL 1.03 OV 0.91 ! PT 0.93 SC 0.99 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.58 NL 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 1.04 KP 0.98 ! LA 0.99 MK 1.03 NL 1.03 OV 0.91 ! PT 0.93 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.47 NL 1.04 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.00 HN 1.04 KP 0.98 ! LA 0.99 MK 1.03 NL 1.04 OV 0.91 ! PT 0.92 SC 0.98 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.37 NL 1.08 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 1.06 KP 0.97 ! LA 1.01 MK 1.03 NL 1.03 OV 0.91 ! PT 0.93 SC 0.99 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.51 NL 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 1.06 KP 0.97 ! LA 1.00 MK 1.05 NL 1.02 OV 0.91 ! PT 0.93 SC 0.99 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ! ! ! Fit before self-cal, rms=0.129032Jy sigma=1.631400 ! Fit after self-cal, rms=0.101628Jy sigma=1.259934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8108 mas, bmaj=1.925 mas, bpa=-3.168 degrees ! Estimated noise=0.584119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139702 Jy ! Component: 100 - total flux cleaned = 0.0166961 Jy ! Component: 150 - total flux cleaned = 0.0184439 Jy ! Component: 200 - total flux cleaned = 0.019079 Jy ! Total flux subtracted in 200 components = 0.019079 Jy ! Clean residual min=-0.014251 max=0.013998 Jy/beam ! Clean residual mean=0.000014 rms=0.002421 Jy/beam ! Combined flux in latest and established models = 1.2349 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 1.2349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098559Jy sigma=1.221811 ! Fit after self-cal, rms=0.098456Jy sigma=1.218699 ! Inverting map ! Added new window around map position (10.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146142 Jy ! Component: 100 - total flux cleaned = 0.0236786 Jy ! Component: 150 - total flux cleaned = 0.0299835 Jy ! Component: 200 - total flux cleaned = 0.0331015 Jy ! Total flux subtracted in 200 components = 0.0331015 Jy ! Clean residual min=-0.013117 max=0.011914 Jy/beam ! Clean residual mean=0.000012 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 1.268 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 95 components and 1.268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095474Jy sigma=1.184053 ! Fit after self-cal, rms=0.095311Jy sigma=1.181637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095311Jy sigma=1.181637 ! Fit after self-cal, rms=0.079512Jy sigma=1.002815 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8091 mas, bmaj=1.923 mas, bpa=-3.338 degrees ! Estimated noise=0.585589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158923 Jy ! Component: 100 - total flux cleaned = -0.000534158 Jy ! Component: 150 - total flux cleaned = 0.000345905 Jy ! Component: 200 - total flux cleaned = 0.000645236 Jy ! Total flux subtracted in 200 components = 0.000645236 Jy ! Clean residual min=-0.006882 max=0.006937 Jy/beam ! Clean residual mean=0.000012 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 1.26864 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 1.26864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078523Jy sigma=0.988786 ! Fit after self-cal, rms=0.078488Jy sigma=0.987660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434151 Jy ! Component: 100 - total flux cleaned = -0.000299724 Jy ! Component: 150 - total flux cleaned = -6.14296e-05 Jy ! Component: 200 - total flux cleaned = 0.000494275 Jy ! Total flux subtracted in 200 components = 0.000494275 Jy ! Clean residual min=-0.006472 max=0.006775 Jy/beam ! Clean residual mean=0.000012 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 1.26914 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 124 components and 1.26914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078058Jy sigma=0.982004 ! Fit after self-cal, rms=0.078044Jy sigma=0.981560 ! Inverting map ! Added new window around map position (-22.8, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604386 Jy ! Component: 100 - total flux cleaned = 0.00620532 Jy ! Component: 150 - total flux cleaned = 0.00643209 Jy ! Component: 200 - total flux cleaned = 0.00693786 Jy ! Total flux subtracted in 200 components = 0.00693786 Jy ! Clean residual min=-0.006155 max=0.005885 Jy/beam ! Clean residual mean=0.000010 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 1.27608 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 140 components and 1.27608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077408Jy sigma=0.973535 ! Fit after self-cal, rms=0.077367Jy sigma=0.972623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077367Jy sigma=0.972623 ! Fit after self-cal, rms=0.075282Jy sigma=0.935549 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8085 mas, bmaj=1.923 mas, bpa=-3.321 degrees ! Estimated noise=0.585805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000951358 Jy ! Component: 100 - total flux cleaned = -0.000948623 Jy ! Component: 150 - total flux cleaned = -0.000723152 Jy ! Component: 200 - total flux cleaned = -0.000431186 Jy ! Total flux subtracted in 200 components = -0.000431186 Jy ! Clean residual min=-0.005890 max=0.004521 Jy/beam ! Clean residual mean=0.000007 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 1.27564 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 1.27564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074873Jy sigma=0.929877 ! Fit after self-cal, rms=0.074862Jy sigma=0.929393 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270831 Jy ! Component: 100 - total flux cleaned = -0.000449269 Jy ! Component: 150 - total flux cleaned = -0.000449435 Jy ! Component: 200 - total flux cleaned = -0.000376953 Jy ! Total flux subtracted in 200 components = -0.000376953 Jy ! Clean residual min=-0.005650 max=0.004351 Jy/beam ! Clean residual mean=0.000007 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 1.27527 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 1.27527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074662Jy sigma=0.926653 ! Fit after self-cal, rms=0.074661Jy sigma=0.926432 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074661Jy sigma=0.926432 ! Fit after self-cal, rms=0.074674Jy sigma=0.925110 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.1 mas, bmaj=4.124 mas, bpa=1.051 degrees ! Estimated noise=0.823067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122775 Jy ! Component: 100 - total flux cleaned = 0.00210969 Jy ! Component: 150 - total flux cleaned = 0.00263635 Jy ! Component: 200 - total flux cleaned = 0.0028613 Jy ! Total flux subtracted in 200 components = 0.0028613 Jy ! Clean residual min=-0.006109 max=0.004682 Jy/beam ! Clean residual mean=0.000016 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 1.27813 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 177 components and 1.27813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074566Jy sigma=0.924130 ! Fit after self-cal, rms=0.074532Jy sigma=0.923591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501538 Jy ! Component: 100 - total flux cleaned = 0.000751215 Jy ! Component: 150 - total flux cleaned = 0.000916338 Jy ! Component: 200 - total flux cleaned = 0.00111269 Jy ! Total flux subtracted in 200 components = 0.00111269 Jy ! Clean residual min=-0.006127 max=0.004314 Jy/beam ! Clean residual mean=0.000016 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 1.27924 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 186 components and 1.27924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074513Jy sigma=0.923641 ! Fit after self-cal, rms=0.074507Jy sigma=0.923538 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.808 mas, bmaj=1.923 mas, bpa=-3.317 degrees ! Estimated noise=0.585825 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.808 x 1.923 at -3.317 degrees (North through East) ! Clean map min=-0.0053769 max=0.88925 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074507Jy sigma=0.923538 ! Fit after self-cal, rms=0.070542Jy sigma=0.863060 ! Inverting map and beam ! Estimated beam: bmin=0.8081 mas, bmaj=1.922 mas, bpa=-3.299 degrees ! Estimated noise=0.586575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849734 Jy ! Component: 100 - total flux cleaned = -0.00121014 Jy ! Component: 150 - total flux cleaned = -0.00151729 Jy ! Component: 200 - total flux cleaned = -0.00173062 Jy ! Total flux subtracted in 200 components = -0.00173062 Jy ! Clean residual min=-0.005740 max=0.004013 Jy/beam ! Clean residual mean=0.000008 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 1.27751 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 189 components and 1.27751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070335Jy sigma=0.859727 ! Fit after self-cal, rms=0.070335Jy sigma=0.859475 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000467696 Jy ! Component: 100 - total flux cleaned = -0.000672135 Jy ! Component: 150 - total flux cleaned = -0.000733426 Jy ! Component: 200 - total flux cleaned = -0.000793129 Jy ! Total flux subtracted in 200 components = -0.000793129 Jy ! Clean residual min=-0.005511 max=0.003900 Jy/beam ! Clean residual mean=0.000008 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 1.27672 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 194 components and 1.27672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070217Jy sigma=0.857807 ! Fit after self-cal, rms=0.070219Jy sigma=0.857706 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070219Jy sigma=0.857706 ! Fit after self-cal, rms=0.070220Jy sigma=0.857126 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.632 mas, bmaj=1.613 mas, bpa=-4.794 degrees ! Estimated noise=0.797295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.655279 Jy ! Component: 100 - total flux cleaned = 0.813909 Jy ! Component: 150 - total flux cleaned = 0.899419 Jy ! Component: 200 - total flux cleaned = 0.960095 Jy ! Total flux subtracted in 200 components = 0.960095 Jy ! Clean residual min=-0.016206 max=0.034996 Jy/beam ! Clean residual mean=0.000021 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.960095 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.960095 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8077 mas, bmaj=1.922 mas, bpa=-3.3 degrees ! Estimated noise=0.58647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832372 Jy ! Component: 100 - total flux cleaned = 0.136602 Jy ! Component: 150 - total flux cleaned = 0.172991 Jy ! Component: 200 - total flux cleaned = 0.198502 Jy ! Total flux subtracted in 200 components = 0.198502 Jy ! Clean residual min=-0.008056 max=0.017624 Jy/beam ! Clean residual mean=0.000013 rms=0.002464 Jy/beam ! Combined flux in latest and established models = 1.1586 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 1.1586 Jy ! Inverting map ! Added new window around map position (0.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197032 Jy ! Component: 100 - total flux cleaned = 0.0347252 Jy ! Component: 150 - total flux cleaned = 0.046719 Jy ! Component: 200 - total flux cleaned = 0.0565589 Jy ! Total flux subtracted in 200 components = 0.0565589 Jy ! Clean residual min=-0.006443 max=0.006819 Jy/beam ! Clean residual mean=0.000011 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 1.21516 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 86 components and 1.21516 Jy ! Inverting map ! Added new window around map position (-0.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00838748 Jy ! Component: 100 - total flux cleaned = 0.0155037 Jy ! Component: 150 - total flux cleaned = 0.0216548 Jy ! Component: 200 - total flux cleaned = 0.026998 Jy ! Total flux subtracted in 200 components = 0.026998 Jy ! Clean residual min=-0.005944 max=0.004525 Jy/beam ! Clean residual mean=0.000010 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 1.24215 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 113 components and 1.24215 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.102 mas, bmaj=4.124 mas, bpa=1.086 degrees ! Estimated noise=0.824168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925099 Jy ! Component: 100 - total flux cleaned = 0.0159352 Jy ! Component: 150 - total flux cleaned = 0.0209983 Jy ! Component: 200 - total flux cleaned = 0.0249575 Jy ! Total flux subtracted in 200 components = 0.0249575 Jy ! Clean residual min=-0.006186 max=0.004707 Jy/beam ! Clean residual mean=0.000020 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 1.26711 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304027 Jy ! Component: 100 - total flux cleaned = 0.00462019 Jy ! Component: 150 - total flux cleaned = 0.00606562 Jy ! Component: 200 - total flux cleaned = 0.00722926 Jy ! Total flux subtracted in 200 components = 0.00722926 Jy ! Clean residual min=-0.005733 max=0.003931 Jy/beam ! Clean residual mean=0.000018 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 1.27434 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 171 components and 1.27434 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8077 mas, bmaj=1.922 mas, bpa=-3.3 degrees ! Estimated noise=0.58647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259537 Jy ! Component: 100 - total flux cleaned = -0.000161186 Jy ! Component: 150 - total flux cleaned = 0.000326809 Jy ! Component: 200 - total flux cleaned = 0.000587067 Jy ! Total flux subtracted in 200 components = 0.000587067 Jy ! Clean residual min=-0.004607 max=0.003315 Jy/beam ! Clean residual mean=0.000008 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 1.27493 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 190 components and 1.27493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069383Jy sigma=0.845779 ! Fit after self-cal, rms=0.069229Jy sigma=0.843236 wmodel J1215-1731_X_b_map.mod ! Writing 190 model components to file: J1215-1731_X_b_map.mod wobs J1215-1731_X_b_uvs.fits ! Writing UV FITS file: J1215-1731_X_b_uvs.fits wwins J1215-1731_X_b_map.win ! wwins: Wrote 8 windows to J1215-1731_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131825 Jy ! Component: 100 - total flux cleaned = -0.00131532 Jy ! Component: 150 - total flux cleaned = -0.00136883 Jy ! Component: 200 - total flux cleaned = -0.00142017 Jy ! Component: 250 - total flux cleaned = -0.00161805 Jy ! Component: 300 - total flux cleaned = -0.00166545 Jy ! Component: 350 - total flux cleaned = -0.0015244 Jy ! Component: 400 - total flux cleaned = -0.00138892 Jy ! Component: 450 - total flux cleaned = -0.00143437 Jy ! Component: 500 - total flux cleaned = -0.00139156 Jy ! Component: 550 - total flux cleaned = -0.00139195 Jy ! Component: 600 - total flux cleaned = -0.00135028 Jy ! Component: 650 - total flux cleaned = -0.00122735 Jy ! Component: 700 - total flux cleaned = -0.00118775 Jy ! Component: 750 - total flux cleaned = -0.00110902 Jy ! Component: 800 - total flux cleaned = -0.00106987 Jy ! Component: 850 - total flux cleaned = -0.000992765 Jy ! Component: 900 - total flux cleaned = -0.000841066 Jy ! Component: 950 - total flux cleaned = -0.000804451 Jy ! Component: 1000 - total flux cleaned = -0.000730744 Jy ! Component: 1050 - total flux cleaned = -0.000620681 Jy ! Component: 1100 - total flux cleaned = -0.000584369 Jy ! Component: 1150 - total flux cleaned = -0.000512106 Jy ! Component: 1200 - total flux cleaned = -0.00036984 Jy ! Component: 1250 - total flux cleaned = -0.000194424 Jy ! Component: 1300 - total flux cleaned = -5.56357e-05 Jy ! Component: 1350 - total flux cleaned = -2.09852e-05 Jy ! Component: 1400 - total flux cleaned = 4.70147e-05 Jy ! Component: 1450 - total flux cleaned = 0.000182083 Jy ! Component: 1500 - total flux cleaned = 0.000215411 Jy ! Component: 1550 - total flux cleaned = 0.000281578 Jy ! Component: 1600 - total flux cleaned = 0.000281438 Jy ! Component: 1650 - total flux cleaned = 0.000444371 Jy ! Component: 1700 - total flux cleaned = 0.000508923 Jy ! Component: 1750 - total flux cleaned = 0.000604696 Jy ! Component: 1800 - total flux cleaned = 0.000794515 Jy ! Component: 1850 - total flux cleaned = 0.000668984 Jy ! Component: 1900 - total flux cleaned = 0.000700619 Jy ! Component: 1950 - total flux cleaned = 0.000700371 Jy ! Component: 2000 - total flux cleaned = 0.00070034 Jy ! Component: 2050 - total flux cleaned = 0.000639377 Jy ! Component: 2100 - total flux cleaned = 0.000669289 Jy ! Component: 2150 - total flux cleaned = 0.000728965 Jy ! Component: 2200 - total flux cleaned = 0.000817729 Jy ! Component: 2250 - total flux cleaned = 0.000611743 Jy ! Component: 2300 - total flux cleaned = 0.000728672 Jy ! Component: 2350 - total flux cleaned = 0.000699661 Jy ! Component: 2400 - total flux cleaned = 0.000757496 Jy ! Component: 2450 - total flux cleaned = 0.000785558 Jy ! Component: 2500 - total flux cleaned = 0.000757464 Jy ! Component: 2550 - total flux cleaned = 0.000588731 Jy ! Component: 2600 - total flux cleaned = 0.000896541 Jy ! Component: 2650 - total flux cleaned = 0.000840707 Jy ! Component: 2700 - total flux cleaned = 0.000840559 Jy ! Component: 2750 - total flux cleaned = 0.000840176 Jy ! Component: 2800 - total flux cleaned = 0.000867483 Jy ! Component: 2850 - total flux cleaned = 0.000975285 Jy ! Component: 2900 - total flux cleaned = 0.00084096 Jy ! Component: 2950 - total flux cleaned = 0.000841262 Jy ! Component: 3000 - total flux cleaned = 0.000867722 Jy ! Component: 3050 - total flux cleaned = 0.000867975 Jy ! Component: 3100 - total flux cleaned = 0.000920307 Jy ! Component: 3150 - total flux cleaned = 0.000738091 Jy ! Component: 3200 - total flux cleaned = 0.000815741 Jy ! Component: 3250 - total flux cleaned = 0.000661508 Jy ! Component: 3300 - total flux cleaned = 0.000763727 Jy ! Component: 3350 - total flux cleaned = 0.000738262 Jy ! Component: 3400 - total flux cleaned = 0.000813988 Jy ! Component: 3450 - total flux cleaned = 0.000738589 Jy ! Component: 3500 - total flux cleaned = 0.00081368 Jy ! Component: 3550 - total flux cleaned = 0.000764185 Jy ! Component: 3600 - total flux cleaned = 0.000689896 Jy ! Component: 3650 - total flux cleaned = 0.000714702 Jy ! Component: 3700 - total flux cleaned = 0.000714796 Jy ! Component: 3750 - total flux cleaned = 0.000617574 Jy ! Component: 3800 - total flux cleaned = 0.000593322 Jy ! Component: 3850 - total flux cleaned = 0.000617591 Jy ! Component: 3900 - total flux cleaned = 0.000521965 Jy ! Component: 3950 - total flux cleaned = 0.000545948 Jy ! Component: 4000 - total flux cleaned = 0.000498884 Jy ! Component: 4050 - total flux cleaned = 0.000381436 Jy ! Total flux subtracted in 4096 components = 0.00045163 Jy ! Clean residual min=-0.001413 max=0.001329 Jy/beam ! Clean residual mean=0.000003 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 1.27538 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 547 components and 1.27538 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1215-1731_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8077 x 1.922 at -3.3 degrees (North through East) ! Clean map min=-0.0029949 max=0.89941 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1215-1731_X_b_map.fits wmodel /vlbi/uf001/uvm//J1215-1731_X_b_map.mod ! Writing 547 model components to file: /vlbi/uf001/uvm//J1215-1731_X_b_map.mod wobs /vlbi/uf001/uvm//J1215-1731_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1215-1731_X_b_uvs.fits wwins /vlbi/uf001/uvm//J1215-1731_X_b_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1215-1731_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.899411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138781 0.138781 0.277561 0.555123 1.11025 2.22049 4.44098 8.88196 17.7639 35.5278 71.0557 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.899 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2161.68 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1215-1731_X_b_dfm.log closed on Sun Jan 13 21:32:45 2019