! Started logfile: /vlbi/uf001/uva//J1213+1307_X_dfm.log on Mon Jan 14 01:43:37 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1213+1307_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1213+1307_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.868827 visibilities/baseline/integration-bin.
! Found source: J1213+1307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 33780 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1213+1307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004139Jy  sigma=22.974136
! Fit after  self-cal, rms=0.932878Jy  sigma=21.326033
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7698 mas, bmaj=1.675 mas, bpa=0.6464 degrees
! Estimated noise=0.324188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0520023 Jy
! Component: 100  -  total flux cleaned = 0.0649938 Jy
! Total flux subtracted in 100 components = 0.0649938 Jy
! Clean residual min=-0.002786 max=0.004950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0649938 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0649938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060081Jy  sigma=1.269532
! Fit after  self-cal, rms=0.059385Jy  sigma=1.254019
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560351 Jy
! Component: 100  -  total flux cleaned = 0.00796243 Jy
! Total flux subtracted in 100 components = 0.00796243 Jy
! Clean residual min=-0.002852 max=0.004453 Jy/beam
! Clean residual mean=-0.000001 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0729563 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.0729563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058883Jy  sigma=1.240013
! Fit after  self-cal, rms=0.058888Jy  sigma=1.239920
! Inverting map 
! Added new window around map position (-1.2, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384611 Jy
! Component: 100  -  total flux cleaned = 0.0055758 Jy
! Total flux subtracted in 100 components = 0.0055758 Jy
! Clean residual min=-0.002732 max=0.003514 Jy/beam
! Clean residual mean=-0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.0785321 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.0785321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058627Jy  sigma=1.232330
! Fit after  self-cal, rms=0.058594Jy  sigma=1.231465
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9593 mas, bmaj=1.959 mas, bpa=0.7618 degrees
! Estimated noise=0.170898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291065 Jy
! Component: 100  -  total flux cleaned = 0.00445467 Jy
! Component: 150  -  total flux cleaned = 0.00512662 Jy
! Component: 200  -  total flux cleaned = 0.00541578 Jy
! Total flux subtracted in 200 components = 0.00541578 Jy
! Clean residual min=-0.001794 max=0.001832 Jy/beam
! Clean residual mean=-0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0839479 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.0839479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058437Jy  sigma=1.227246
! Fit after  self-cal, rms=0.058432Jy  sigma=1.227108
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9593 x 1.959 at 0.7618 degrees (North through East)
! Clean map  min=-0.0016716  max=0.068404 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.97     HN        0.89     KP        1.08     
!   LA        0.98     MK        1.06     NL        1.04     OV        0.92     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.03     HN        0.91     KP        1.11     
!   LA        0.95     MK        1.04     NL        1.11     OV        0.90     
!   PT        0.97     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.01     HN        0.90     KP        1.02     
!   LA        0.95     MK        0.99     NL        1.10     OV        0.94     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        0.94     KP        1.09     
!   LA        0.95     MK        1.08     NL        1.10     OV        0.93     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.02     HN        0.91     KP        1.08     
!   LA        0.98     MK        1.04     NL        1.07     OV        0.92     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.04     HN        0.88     KP        1.04     
!   LA        0.97     MK        1.06     NL        1.07     OV        0.93     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        0.89     KP        1.14     
!   LA        0.99     MK        1.09     NL        1.04     OV        0.90     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.93     KP        1.08     
!   LA        1.01     MK        1.07     NL        1.08     OV        0.94     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.01     HN        0.91     KP        1.06     
!   LA        0.99     MK        1.04     NL        1.08     OV        0.92     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.97     KP        1.05     
!   LA        0.98     MK        1.06     NL        1.04     OV        0.93     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        0.88     KP        1.04     
!   LA        1.02     MK        1.07     NL        1.03     OV        0.95     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.86     KP        1.11     
!   LA        1.00     MK        1.02     NL        1.12     OV        0.94     
!   PT        0.87     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.058432Jy  sigma=1.227108
! Fit after  self-cal, rms=0.057450Jy  sigma=1.217524
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9546 mas, bmaj=1.97 mas, bpa=1.291 degrees
! Estimated noise=0.17046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131804 Jy
! Component: 100  -  total flux cleaned = -0.0014905 Jy
! Component: 150  -  total flux cleaned = -0.00159472 Jy
! Component: 200  -  total flux cleaned = -0.00159758 Jy
! Total flux subtracted in 200 components = -0.00159758 Jy
! Clean residual min=-0.001120 max=0.001339 Jy/beam
! Clean residual mean=0.000001 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0823503 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.0823503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057404Jy  sigma=1.216569
! Fit after  self-cal, rms=0.057448Jy  sigma=1.216257
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057448Jy  sigma=1.216257
! Fit after  self-cal, rms=0.057783Jy  sigma=1.211967
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9546 mas, bmaj=1.965 mas, bpa=1.24 degrees
! Estimated noise=0.170105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000908299 Jy
! Component: 100  -  total flux cleaned = -0.000939188 Jy
! Component: 150  -  total flux cleaned = -0.00088857 Jy
! Component: 200  -  total flux cleaned = -0.00082914 Jy
! Total flux subtracted in 200 components = -0.00082914 Jy
! Clean residual min=-0.000902 max=0.001276 Jy/beam
! Clean residual mean=0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0815211 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.0815211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057765Jy  sigma=1.211593
! Fit after  self-cal, rms=0.057792Jy  sigma=1.211449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.6, 40.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000738151 Jy
! Component: 100  -  total flux cleaned = 0.000927951 Jy
! Component: 150  -  total flux cleaned = 0.000982529 Jy
! Component: 200  -  total flux cleaned = 0.00106129 Jy
! Total flux subtracted in 200 components = 0.00106129 Jy
! Clean residual min=-0.000859 max=0.000974 Jy/beam
! Clean residual mean=0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0825824 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.0825824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057765Jy  sigma=1.210921
! Fit after  self-cal, rms=0.057763Jy  sigma=1.210872
! Inverting map 
! Added new window around map position (-2.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000944694 Jy
! Component: 100  -  total flux cleaned = 0.0011472 Jy
! Component: 150  -  total flux cleaned = 0.00126575 Jy
! Component: 200  -  total flux cleaned = 0.00137387 Jy
! Total flux subtracted in 200 components = 0.00137387 Jy
! Clean residual min=-0.000844 max=0.000868 Jy/beam
! Clean residual mean=0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0839563 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.0839563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057744Jy  sigma=1.210468
! Fit after  self-cal, rms=0.057742Jy  sigma=1.210422
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057742Jy  sigma=1.210422
! Fit after  self-cal, rms=0.057847Jy  sigma=1.210215
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9536 mas, bmaj=1.967 mas, bpa=1.4 degrees
! Estimated noise=0.170115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.6434e-05 Jy
! Component: 100  -  total flux cleaned = 8.29345e-05 Jy
! Component: 150  -  total flux cleaned = 0.000203625 Jy
! Component: 200  -  total flux cleaned = 0.000258226 Jy
! Total flux subtracted in 200 components = 0.000258226 Jy
! Clean residual min=-0.000853 max=0.000836 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0842145 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.0842145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057837Jy  sigma=1.209999
! Fit after  self-cal, rms=0.057843Jy  sigma=1.209982
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203115 Jy
! Component: 100  -  total flux cleaned = 0.000265016 Jy
! Component: 150  -  total flux cleaned = 0.00032367 Jy
! Component: 200  -  total flux cleaned = 0.000356951 Jy
! Total flux subtracted in 200 components = 0.000356951 Jy
! Clean residual min=-0.000849 max=0.000833 Jy/beam
! Clean residual mean=0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0845715 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 118 components and 0.0845715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057838Jy  sigma=1.209879
! Fit after  self-cal, rms=0.057838Jy  sigma=1.209873
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057838Jy  sigma=1.209873
! Fit after  self-cal, rms=0.057826Jy  sigma=1.209833
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.955 mas, bpa=-1.002 degrees
! Estimated noise=0.211265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187912 Jy
! Component: 100  -  total flux cleaned = 0.000296775 Jy
! Component: 150  -  total flux cleaned = 0.000367849 Jy
! Component: 200  -  total flux cleaned = 0.000420383 Jy
! Total flux subtracted in 200 components = 0.000420383 Jy
! Clean residual min=-0.000878 max=0.001177 Jy/beam
! Clean residual mean=0.000001 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.0849918 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 129 components and 0.0849918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057824Jy  sigma=1.209788
! Fit after  self-cal, rms=0.057826Jy  sigma=1.209778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, 7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935573 Jy
! Component: 100  -  total flux cleaned = 0.00114553 Jy
! Component: 150  -  total flux cleaned = 0.00130151 Jy
! Component: 200  -  total flux cleaned = 0.00136243 Jy
! Total flux subtracted in 200 components = 0.00136243 Jy
! Clean residual min=-0.000856 max=0.000691 Jy/beam
! Clean residual mean=0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0863543 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 156 components and 0.0863543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057815Jy  sigma=1.209523
! Fit after  self-cal, rms=0.057816Jy  sigma=1.209501
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9531 mas, bmaj=1.968 mas, bpa=1.505 degrees
! Estimated noise=0.170094 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9531 x 1.968 at 1.505 degrees (North through East)
! Clean map  min=-0.00078869  max=0.068323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7675 mas, bmaj=1.684 mas, bpa=1.448 degrees
! Estimated noise=0.321377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0521495 Jy
! Component: 100  -  total flux cleaned = 0.0649747 Jy
! Component: 150  -  total flux cleaned = 0.0700594 Jy
! Component: 200  -  total flux cleaned = 0.072976 Jy
! Total flux subtracted in 200 components = 0.072976 Jy
! Clean residual min=-0.001882 max=0.001905 Jy/beam
! Clean residual mean=0.000000 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.0729759 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0729759 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9531 mas, bmaj=1.968 mas, bpa=1.505 degrees
! Estimated noise=0.170094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278931 Jy
! Component: 100  -  total flux cleaned = 0.00462936 Jy
! Component: 150  -  total flux cleaned = 0.00605644 Jy
! Component: 200  -  total flux cleaned = 0.00723405 Jy
! Total flux subtracted in 200 components = 0.00723405 Jy
! Clean residual min=-0.000845 max=0.000867 Jy/beam
! Clean residual mean=0.000001 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.08021 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 48 components and 0.08021 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.955 mas, bpa=-1.002 degrees
! Estimated noise=0.211265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139648 Jy
! Component: 100  -  total flux cleaned = 0.00244061 Jy
! Component: 150  -  total flux cleaned = 0.00315663 Jy
! Component: 200  -  total flux cleaned = 0.00364133 Jy
! Total flux subtracted in 200 components = 0.00364133 Jy
! Clean residual min=-0.000925 max=0.000880 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0838513 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000419083 Jy
! Component: 100  -  total flux cleaned = 0.000767869 Jy
! Component: 150  -  total flux cleaned = 0.00109768 Jy
! Component: 200  -  total flux cleaned = 0.00139283 Jy
! Total flux subtracted in 200 components = 0.00139283 Jy
! Clean residual min=-0.000880 max=0.000798 Jy/beam
! Clean residual mean=0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0852441 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 105 components and 0.0852441 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9531 mas, bmaj=1.968 mas, bpa=1.505 degrees
! Estimated noise=0.170094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203257 Jy
! Component: 100  -  total flux cleaned = 0.000434918 Jy
! Component: 150  -  total flux cleaned = 0.00060836 Jy
! Component: 200  -  total flux cleaned = 0.000734357 Jy
! Total flux subtracted in 200 components = 0.000734357 Jy
! Clean residual min=-0.000860 max=0.000719 Jy/beam
! Clean residual mean=0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0859785 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 139 components and 0.0859785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057822Jy  sigma=1.209628
! Fit after  self-cal, rms=0.057815Jy  sigma=1.209591
wmodel J1213+1307_X_map.mod
! Writing 139 model components to file: J1213+1307_X_map.mod
wobs   J1213+1307_X_uvs.fits
! Writing UV FITS file: J1213+1307_X_uvs.fits
wwins  J1213+1307_X_map.win
! wwins: Wrote 6 windows to J1213+1307_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195758 Jy
! Component: 100  -  total flux cleaned = -0.000208472 Jy
! Component: 150  -  total flux cleaned = -0.000245532 Jy
! Component: 200  -  total flux cleaned = -0.000318407 Jy
! Component: 250  -  total flux cleaned = -0.000342141 Jy
! Component: 300  -  total flux cleaned = -0.000365355 Jy
! Component: 350  -  total flux cleaned = -0.000399464 Jy
! Component: 400  -  total flux cleaned = -0.000399417 Jy
! Component: 450  -  total flux cleaned = -0.000421252 Jy
! Component: 500  -  total flux cleaned = -0.00037797 Jy
! Component: 550  -  total flux cleaned = -0.000356605 Jy
! Component: 600  -  total flux cleaned = -0.00033574 Jy
! Component: 650  -  total flux cleaned = -0.000346265 Jy
! Component: 700  -  total flux cleaned = -0.000335984 Jy
! Component: 750  -  total flux cleaned = -0.000325851 Jy
! Component: 800  -  total flux cleaned = -0.000315816 Jy
! Component: 850  -  total flux cleaned = -0.000295966 Jy
! Component: 900  -  total flux cleaned = -0.000266584 Jy
! Component: 950  -  total flux cleaned = -0.000227854 Jy
! Component: 1000  -  total flux cleaned = -0.000199085 Jy
! Component: 1050  -  total flux cleaned = -0.00018001 Jy
! Component: 1100  -  total flux cleaned = -0.000151727 Jy
! Component: 1150  -  total flux cleaned = -0.000105231 Jy
! Component: 1200  -  total flux cleaned = -7.76325e-05 Jy
! Component: 1250  -  total flux cleaned = -7.77048e-05 Jy
! Component: 1300  -  total flux cleaned = -5.05005e-05 Jy
! Component: 1350  -  total flux cleaned = -5.94938e-05 Jy
! Component: 1400  -  total flux cleaned = -3.28557e-05 Jy
! Component: 1450  -  total flux cleaned = -3.28311e-05 Jy
! Component: 1500  -  total flux cleaned = -3.27743e-05 Jy
! Component: 1550  -  total flux cleaned = -3.27849e-05 Jy
! Component: 1600  -  total flux cleaned = -3.27353e-05 Jy
! Component: 1650  -  total flux cleaned = 1.35151e-06 Jy
! Component: 1700  -  total flux cleaned = -7.08268e-06 Jy
! Component: 1750  -  total flux cleaned = -6.98137e-06 Jy
! Component: 1800  -  total flux cleaned = -4.03956e-05 Jy
! Component: 1850  -  total flux cleaned = -2.374e-05 Jy
! Component: 1900  -  total flux cleaned = -4.01908e-05 Jy
! Component: 1950  -  total flux cleaned = -1.55908e-05 Jy
! Component: 2000  -  total flux cleaned = -1.57244e-05 Jy
! Component: 2050  -  total flux cleaned = -1.56835e-05 Jy
! Component: 2100  -  total flux cleaned = -3.9661e-05 Jy
! Component: 2150  -  total flux cleaned = -6.34502e-05 Jy
! Component: 2200  -  total flux cleaned = -3.97336e-05 Jy
! Component: 2250  -  total flux cleaned = -3.96705e-05 Jy
! Component: 2300  -  total flux cleaned = -5.52645e-05 Jy
! Component: 2350  -  total flux cleaned = -4.74774e-05 Jy
! Component: 2400  -  total flux cleaned = -1.67209e-05 Jy
! Component: 2450  -  total flux cleaned = -9.08191e-06 Jy
! Component: 2500  -  total flux cleaned = -1.48291e-06 Jy
! Component: 2550  -  total flux cleaned = 2.87852e-05 Jy
! Component: 2600  -  total flux cleaned = 2.12553e-05 Jy
! Component: 2650  -  total flux cleaned = 8.09121e-05 Jy
! Component: 2700  -  total flux cleaned = 7.33831e-05 Jy
! Component: 2750  -  total flux cleaned = 8.81182e-05 Jy
! Component: 2800  -  total flux cleaned = 9.553e-05 Jy
! Component: 2850  -  total flux cleaned = 0.000139126 Jy
! Component: 2900  -  total flux cleaned = 0.000131911 Jy
! Component: 2950  -  total flux cleaned = 0.000175011 Jy
! Component: 3000  -  total flux cleaned = 0.000160712 Jy
! Component: 3050  -  total flux cleaned = 0.000174922 Jy
! Component: 3100  -  total flux cleaned = 0.000224442 Jy
! Component: 3150  -  total flux cleaned = 0.000252513 Jy
! Component: 3200  -  total flux cleaned = 0.00026644 Jy
! Component: 3250  -  total flux cleaned = 0.000266416 Jy
! Component: 3300  -  total flux cleaned = 0.000314849 Jy
! Component: 3350  -  total flux cleaned = 0.00032866 Jy
! Component: 3400  -  total flux cleaned = 0.000342321 Jy
! Component: 3450  -  total flux cleaned = 0.000369473 Jy
! Component: 3500  -  total flux cleaned = 0.000376248 Jy
! Component: 3550  -  total flux cleaned = 0.000376325 Jy
! Component: 3600  -  total flux cleaned = 0.000396368 Jy
! Component: 3650  -  total flux cleaned = 0.000442945 Jy
! Component: 3700  -  total flux cleaned = 0.000442919 Jy
! Component: 3750  -  total flux cleaned = 0.000462621 Jy
! Component: 3800  -  total flux cleaned = 0.000456174 Jy
! Component: 3850  -  total flux cleaned = 0.000488722 Jy
! Component: 3900  -  total flux cleaned = 0.000521126 Jy
! Component: 3950  -  total flux cleaned = 0.000501753 Jy
! Component: 4000  -  total flux cleaned = 0.000521067 Jy
! Component: 4050  -  total flux cleaned = 0.000533849 Jy
! Total flux subtracted in 4096 components = 0.000584671 Jy
! Clean residual min=-0.000409 max=0.000349 Jy/beam
! Clean residual mean=0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0865631 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 429 components and 0.0865632 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1213+1307_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9531 x 1.968 at 1.505 degrees (North through East)
! Clean map  min=-0.00072283  max=0.068606 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1213+1307_X_map.fits
wmodel /vlbi/uf001/uva//J1213+1307_X_map.mod
! Writing 429 model components to file: /vlbi/uf001/uva//J1213+1307_X_map.mod
wobs   /vlbi/uf001/uva//J1213+1307_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1213+1307_X_uvs.fits
wwins  /vlbi/uf001/uva//J1213+1307_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J1213+1307_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0686063 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000109426 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.478495 0.478495 0.95699 1.91398 3.82796 7.65592 15.3118 30.6237 61.2473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  626.966 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1213+1307_X_dfm.log closed on Mon Jan 14 01:43:43 2019