! Started logfile: /vlbi/uf001/uva//J1210-2711_S_b_dfm.log on Mon Jan 14 01:42:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1210-2711_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1210-2711_S_b_uva.fits
! AN table 1: 74 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J1210-2711
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1210-2711_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007207Jy  sigma=15.926275
! Fit after  self-cal, rms=0.948112Jy  sigma=15.026261
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=22.71 mas, bpa=-23.47 degrees
! Estimated noise=1.25679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0439606 Jy
! Component: 100  -  total flux cleaned = 0.0483364 Jy
! Total flux subtracted in 100 components = 0.0483364 Jy
! Clean residual min=-0.008744 max=0.008337 Jy/beam
! Clean residual mean=0.000017 rms=0.002746 Jy/beam
! Combined flux in latest and established models = 0.0483364 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0483364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088911Jy  sigma=1.233030
! Fit after  self-cal, rms=0.087631Jy  sigma=1.217348
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.116 mas, bmaj=23.91 mas, bpa=-22.9 degrees
! Estimated noise=0.735338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561895 Jy
! Component: 100  -  total flux cleaned = 0.00538842 Jy
! Component: 150  -  total flux cleaned = 0.00499823 Jy
! Component: 200  -  total flux cleaned = 0.00476321 Jy
! Total flux subtracted in 200 components = 0.00476321 Jy
! Clean residual min=-0.004164 max=0.005217 Jy/beam
! Clean residual mean=0.000022 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 0.0530996 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 0.0530996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087099Jy  sigma=1.211013
! Fit after  self-cal, rms=0.086897Jy  sigma=1.210206
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.116 x 23.91 at -22.9 degrees (North through East)
! Clean map  min=-0.0039609  max=0.05722 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        1.05     LA        0.91     
!   MK        1.11     NL        1.35     PT        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     FD        0.96     KP        1.10     LA        0.94     
!   MK        0.98     NL        0.62     PT        1.23     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     KP        1.11     LA        0.96     
!   MK        1.02     NL        1.02     PT        1.14     
! 
! 
! Fit before self-cal, rms=0.086897Jy  sigma=1.210206
! Fit after  self-cal, rms=0.080710Jy  sigma=1.191058
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.142 mas, bmaj=23.06 mas, bpa=-22.7 degrees
! Estimated noise=0.724324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238353 Jy
! Component: 100  -  total flux cleaned = 0.00322987 Jy
! Component: 150  -  total flux cleaned = 0.00328143 Jy
! Component: 200  -  total flux cleaned = 0.00328105 Jy
! Total flux subtracted in 200 components = 0.00328105 Jy
! Clean residual min=-0.003446 max=0.003442 Jy/beam
! Clean residual mean=0.000011 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.0563806 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 0.0563806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080627Jy  sigma=1.189455
! Fit after  self-cal, rms=0.081050Jy  sigma=1.183994
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081050Jy  sigma=1.183994
! Fit after  self-cal, rms=0.082706Jy  sigma=1.181670
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.108 mas, bmaj=22.71 mas, bpa=-22.61 degrees
! Estimated noise=0.729558 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210427 Jy
! Component: 100  -  total flux cleaned = 0.00304497 Jy
! Component: 150  -  total flux cleaned = 0.00317336 Jy
! Component: 200  -  total flux cleaned = 0.00325413 Jy
! Total flux subtracted in 200 components = 0.00325413 Jy
! Clean residual min=-0.002933 max=0.003421 Jy/beam
! Clean residual mean=0.000013 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.0596348 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.0596348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082641Jy  sigma=1.180405
! Fit after  self-cal, rms=0.082999Jy  sigma=1.179245
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000514753 Jy
! Component: 100  -  total flux cleaned = -0.000700173 Jy
! Component: 150  -  total flux cleaned = -0.000779026 Jy
! Component: 200  -  total flux cleaned = -0.000742484 Jy
! Total flux subtracted in 200 components = -0.000742484 Jy
! Clean residual min=-0.003086 max=0.003354 Jy/beam
! Clean residual mean=0.000010 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0588923 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.0588923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082965Jy  sigma=1.178375
! Fit after  self-cal, rms=0.082998Jy  sigma=1.178234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082998Jy  sigma=1.178234
! Fit after  self-cal, rms=0.083148Jy  sigma=1.175867
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.088 mas, bmaj=22.9 mas, bpa=-22.59 degrees
! Estimated noise=0.72993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131523 Jy
! Component: 100  -  total flux cleaned = 0.00157495 Jy
! Component: 150  -  total flux cleaned = 0.00166785 Jy
! Component: 200  -  total flux cleaned = 0.00172203 Jy
! Total flux subtracted in 200 components = 0.00172203 Jy
! Clean residual min=-0.002758 max=0.003835 Jy/beam
! Clean residual mean=-0.000001 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0606143 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.0606143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083118Jy  sigma=1.175334
! Fit after  self-cal, rms=0.083260Jy  sigma=1.174775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27, -98).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215722 Jy
! Component: 100  -  total flux cleaned = 0.0018961 Jy
! Component: 150  -  total flux cleaned = 0.00189132 Jy
! Component: 200  -  total flux cleaned = 0.00184565 Jy
! Total flux subtracted in 200 components = 0.00184565 Jy
! Clean residual min=-0.002341 max=0.002263 Jy/beam
! Clean residual mean=-0.000005 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.06246 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 118 components and 0.06246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083104Jy  sigma=1.172649
! Fit after  self-cal, rms=0.083082Jy  sigma=1.172017
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083082Jy  sigma=1.172017
! Fit after  self-cal, rms=0.082794Jy  sigma=1.171607
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.776 mas, bmaj=25.29 mas, bpa=-12.27 degrees
! Estimated noise=0.838067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011202 Jy
! Component: 100  -  total flux cleaned = 0.00162554 Jy
! Component: 150  -  total flux cleaned = 0.00181653 Jy
! Component: 200  -  total flux cleaned = 0.00192071 Jy
! Total flux subtracted in 200 components = 0.00192071 Jy
! Clean residual min=-0.002166 max=0.002053 Jy/beam
! Clean residual mean=-0.000013 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.0643807 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 138 components and 0.0643807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082740Jy  sigma=1.170814
! Fit after  self-cal, rms=0.082744Jy  sigma=1.170503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000631305 Jy
! Component: 100  -  total flux cleaned = 0.000782568 Jy
! Component: 150  -  total flux cleaned = 0.000887387 Jy
! Component: 200  -  total flux cleaned = 0.000984568 Jy
! Total flux subtracted in 200 components = 0.000984568 Jy
! Clean residual min=-0.002170 max=0.002070 Jy/beam
! Clean residual mean=-0.000013 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.0653652 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 158 components and 0.0653652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082714Jy  sigma=1.170009
! Fit after  self-cal, rms=0.082696Jy  sigma=1.169921
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.088 mas, bmaj=22.79 mas, bpa=-22.57 degrees
! Estimated noise=0.728129 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.088 x 22.79 at -22.57 degrees (North through East)
! Clean map  min=-0.002685  max=0.055267 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=22.06 mas, bpa=-23.18 degrees
! Estimated noise=1.22654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434343 Jy
! Component: 100  -  total flux cleaned = 0.049806 Jy
! Component: 150  -  total flux cleaned = 0.0518211 Jy
! Component: 200  -  total flux cleaned = 0.0539981 Jy
! Total flux subtracted in 200 components = 0.0539981 Jy
! Clean residual min=-0.005701 max=0.004621 Jy/beam
! Clean residual mean=0.000008 rms=0.001530 Jy/beam
! Combined flux in latest and established models = 0.0539981 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0539981 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.088 mas, bmaj=22.79 mas, bpa=-22.57 degrees
! Estimated noise=0.728129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465887 Jy
! Component: 100  -  total flux cleaned = 0.00741091 Jy
! Component: 150  -  total flux cleaned = 0.00885761 Jy
! Component: 200  -  total flux cleaned = 0.00966162 Jy
! Total flux subtracted in 200 components = 0.00966162 Jy
! Clean residual min=-0.003005 max=0.002836 Jy/beam
! Clean residual mean=-0.000004 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.0636597 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 67 components and 0.0636597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.776 mas, bmaj=25.29 mas, bpa=-12.27 degrees
! Estimated noise=0.838067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124132 Jy
! Component: 100  -  total flux cleaned = 0.00193552 Jy
! Component: 150  -  total flux cleaned = 0.00218166 Jy
! Component: 200  -  total flux cleaned = 0.00240635 Jy
! Total flux subtracted in 200 components = 0.00240635 Jy
! Clean residual min=-0.002635 max=0.002677 Jy/beam
! Clean residual mean=-0.000009 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.066066 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153307 Jy
! Component: 100  -  total flux cleaned = 0.000200425 Jy
! Component: 150  -  total flux cleaned = 0.000243587 Jy
! Component: 200  -  total flux cleaned = 0.000283805 Jy
! Total flux subtracted in 200 components = 0.000283805 Jy
! Clean residual min=-0.002338 max=0.002567 Jy/beam
! Clean residual mean=-0.000012 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.0663498 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 128 components and 0.0663499 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.088 mas, bmaj=22.79 mas, bpa=-22.57 degrees
! Estimated noise=0.728129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000313103 Jy
! Component: 100  -  total flux cleaned = -0.000313376 Jy
! Component: 150  -  total flux cleaned = -0.000317205 Jy
! Component: 200  -  total flux cleaned = -0.000317965 Jy
! Total flux subtracted in 200 components = -0.000317965 Jy
! Clean residual min=-0.002013 max=0.002292 Jy/beam
! Clean residual mean=-0.000007 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0660319 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 151 components and 0.0660319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082648Jy  sigma=1.169486
! Fit after  self-cal, rms=0.082616Jy  sigma=1.169041
wmodel J1210-2711_S_b_map.mod
! Writing 151 model components to file: J1210-2711_S_b_map.mod
wobs   J1210-2711_S_b_uvs.fits
! Writing UV FITS file: J1210-2711_S_b_uvs.fits
wwins  J1210-2711_S_b_map.win
! wwins: Wrote 2 windows to J1210-2711_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000473406 Jy
! Component: 100  -  total flux cleaned = -0.00069602 Jy
! Component: 150  -  total flux cleaned = -0.00093662 Jy
! Component: 200  -  total flux cleaned = -0.00100102 Jy
! Component: 250  -  total flux cleaned = -0.00106053 Jy
! Component: 300  -  total flux cleaned = -0.000947121 Jy
! Component: 350  -  total flux cleaned = -0.00084013 Jy
! Component: 400  -  total flux cleaned = -0.000712379 Jy
! Component: 450  -  total flux cleaned = -0.00061477 Jy
! Component: 500  -  total flux cleaned = -0.000520786 Jy
! Component: 550  -  total flux cleaned = -0.000475856 Jy
! Component: 600  -  total flux cleaned = -0.000454689 Jy
! Component: 650  -  total flux cleaned = -0.000454683 Jy
! Component: 700  -  total flux cleaned = -0.000454067 Jy
! Component: 750  -  total flux cleaned = -0.000394993 Jy
! Component: 800  -  total flux cleaned = -0.000376476 Jy
! Component: 850  -  total flux cleaned = -0.000395105 Jy
! Component: 900  -  total flux cleaned = -0.000394643 Jy
! Component: 950  -  total flux cleaned = -0.000394117 Jy
! Component: 1000  -  total flux cleaned = -0.000376636 Jy
! Component: 1050  -  total flux cleaned = -0.000360025 Jy
! Component: 1100  -  total flux cleaned = -0.000375631 Jy
! Component: 1150  -  total flux cleaned = -0.000375306 Jy
! Component: 1200  -  total flux cleaned = -0.000420803 Jy
! Component: 1250  -  total flux cleaned = -0.000435799 Jy
! Component: 1300  -  total flux cleaned = -0.00050889 Jy
! Component: 1350  -  total flux cleaned = -0.000566273 Jy
! Component: 1400  -  total flux cleaned = -0.000580052 Jy
! Component: 1450  -  total flux cleaned = -0.000648803 Jy
! Component: 1500  -  total flux cleaned = -0.000689289 Jy
! Component: 1550  -  total flux cleaned = -0.000702602 Jy
! Component: 1600  -  total flux cleaned = -0.000755 Jy
! Component: 1650  -  total flux cleaned = -0.000793867 Jy
! Component: 1700  -  total flux cleaned = -0.000857404 Jy
! Component: 1750  -  total flux cleaned = -0.000894939 Jy
! Component: 1800  -  total flux cleaned = -0.000932246 Jy
! Component: 1850  -  total flux cleaned = -0.000944465 Jy
! Component: 1900  -  total flux cleaned = -0.000956441 Jy
! Component: 1950  -  total flux cleaned = -0.000908499 Jy
! Component: 2000  -  total flux cleaned = -0.00084951 Jy
! Component: 2050  -  total flux cleaned = -0.000849389 Jy
! Component: 2100  -  total flux cleaned = -0.000791425 Jy
! Component: 2150  -  total flux cleaned = -0.00075697 Jy
! Component: 2200  -  total flux cleaned = -0.000700163 Jy
! Component: 2250  -  total flux cleaned = -0.000632696 Jy
! Component: 2300  -  total flux cleaned = -0.000588114 Jy
! Component: 2350  -  total flux cleaned = -0.000599066 Jy
! Component: 2400  -  total flux cleaned = -0.000543971 Jy
! Component: 2450  -  total flux cleaned = -0.000489514 Jy
! Component: 2500  -  total flux cleaned = -0.000424576 Jy
! Component: 2550  -  total flux cleaned = -0.000349234 Jy
! Component: 2600  -  total flux cleaned = -0.000327838 Jy
! Component: 2650  -  total flux cleaned = -0.000285374 Jy
! Component: 2700  -  total flux cleaned = -0.000264192 Jy
! Component: 2750  -  total flux cleaned = -0.000253614 Jy
! Component: 2800  -  total flux cleaned = -0.000190693 Jy
! Component: 2850  -  total flux cleaned = -0.000169832 Jy
! Component: 2900  -  total flux cleaned = -0.000138543 Jy
! Component: 2950  -  total flux cleaned = -6.59158e-05 Jy
! Component: 3000  -  total flux cleaned = -3.49158e-05 Jy
! Component: 3050  -  total flux cleaned = -3.96814e-06 Jy
! Component: 3100  -  total flux cleaned = 1.65581e-05 Jy
! Component: 3150  -  total flux cleaned = 5.75263e-05 Jy
! Component: 3200  -  total flux cleaned = 9.8418e-05 Jy
! Component: 3250  -  total flux cleaned = 0.000139166 Jy
! Component: 3300  -  total flux cleaned = 0.000159529 Jy
! Component: 3350  -  total flux cleaned = 0.000210152 Jy
! Component: 3400  -  total flux cleaned = 0.000250553 Jy
! Component: 3450  -  total flux cleaned = 0.000250591 Jy
! Component: 3500  -  total flux cleaned = 0.000310937 Jy
! Component: 3550  -  total flux cleaned = 0.000371155 Jy
! Component: 3600  -  total flux cleaned = 0.00042119 Jy
! Component: 3650  -  total flux cleaned = 0.000471201 Jy
! Component: 3700  -  total flux cleaned = 0.000521139 Jy
! Component: 3750  -  total flux cleaned = 0.00056102 Jy
! Component: 3800  -  total flux cleaned = 0.000620775 Jy
! Component: 3850  -  total flux cleaned = 0.00067046 Jy
! Component: 3900  -  total flux cleaned = 0.00068039 Jy
! Component: 3950  -  total flux cleaned = 0.000720173 Jy
! Component: 4000  -  total flux cleaned = 0.000759849 Jy
! Component: 4050  -  total flux cleaned = 0.000779728 Jy
! Total flux subtracted in 4096 components = 0.000789641 Jy
! Clean residual min=-0.000520 max=0.000601 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0668215 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 437 components and 0.0668216 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1210-2711_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.088 x 22.79 at -22.57 degrees (North through East)
! Clean map  min=-0.002751  max=0.050783 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1210-2711_S_b_map.fits
wmodel /vlbi/uf001/uva//J1210-2711_S_b_map.mod
! Writing 437 model components to file: /vlbi/uf001/uva//J1210-2711_S_b_map.mod
wobs   /vlbi/uf001/uva//J1210-2711_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1210-2711_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1210-2711_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1210-2711_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0507825 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000183136 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08188 1.08188 2.16377 4.32754 8.65507 17.3101 34.6203 69.2406
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  277.294 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1210-2711_S_b_dfm.log closed on Mon Jan 14 01:42:30 2019