! Started logfile: /vlbi/uf001/uva//J1210-2711_S_a_dfm.log on Mon Jan 14 01:42:20 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1210-2711_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1210-2711_S_a_uva.fits
! AN table 1: 48 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.767857 visibilities/baseline/integration-bin.
! Found source: J1210-2711
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3096 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1210-2711_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006544Jy  sigma=16.092956
! Fit after  self-cal, rms=0.952423Jy  sigma=15.222869
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.871 mas, bmaj=20.94 mas, bpa=12.11 degrees
! Estimated noise=1.25853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.039073 Jy
! Component: 100  -  total flux cleaned = 0.0487301 Jy
! Total flux subtracted in 100 components = 0.0487301 Jy
! Clean residual min=-0.005785 max=0.004821 Jy/beam
! Clean residual mean=0.000009 rms=0.001435 Jy/beam
! Combined flux in latest and established models = 0.0487301 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0487301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082799Jy  sigma=1.212420
! Fit after  self-cal, rms=0.080623Jy  sigma=1.180019
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.824 mas, bmaj=20.79 mas, bpa=10.91 degrees
! Estimated noise=0.807789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634835 Jy
! Component: 100  -  total flux cleaned = 0.00883243 Jy
! Component: 150  -  total flux cleaned = 0.00912962 Jy
! Component: 200  -  total flux cleaned = 0.00926934 Jy
! Total flux subtracted in 200 components = 0.00926934 Jy
! Clean residual min=-0.003965 max=0.003954 Jy/beam
! Clean residual mean=0.000004 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.0579994 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.0579994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080138Jy  sigma=1.172532
! Fit after  self-cal, rms=0.080147Jy  sigma=1.172099
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.824 x 20.79 at 10.91 degrees (North through East)
! Clean map  min=-0.003957  max=0.053957 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.87     KP        1.11     LA        0.87     
!   NL        1.06     OV        1.12     PT        0.95     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.95     KP        1.08     LA        0.93     
!   NL        0.94     OV        1.05     PT        1.08     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.91     KP        1.12     LA        0.95     
!   NL        0.99     OV        1.11     PT        1.12     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.080147Jy  sigma=1.172099
! Fit after  self-cal, rms=0.077973Jy  sigma=1.168218
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.833 mas, bmaj=20.87 mas, bpa=11.18 degrees
! Estimated noise=0.802336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147378 Jy
! Component: 100  -  total flux cleaned = 0.000258965 Jy
! Component: 150  -  total flux cleaned = 0.000229412 Jy
! Component: 200  -  total flux cleaned = 0.00020125 Jy
! Total flux subtracted in 200 components = 0.00020125 Jy
! Clean residual min=-0.003675 max=0.003125 Jy/beam
! Clean residual mean=-0.000001 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.0582007 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.0582007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077945Jy  sigma=1.167702
! Fit after  self-cal, rms=0.078115Jy  sigma=1.166370
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078115Jy  sigma=1.166370
! Fit after  self-cal, rms=0.077704Jy  sigma=1.163917
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.816 mas, bmaj=21.08 mas, bpa=11.26 degrees
! Estimated noise=0.807227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.64058e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113785 Jy
! Component: 150  -  total flux cleaned = 8.39607e-05 Jy
! Component: 200  -  total flux cleaned = 8.48696e-05 Jy
! Total flux subtracted in 200 components = 8.48696e-05 Jy
! Clean residual min=-0.003448 max=0.003245 Jy/beam
! Clean residual mean=0.000002 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.0582855 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.0582855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077677Jy  sigma=1.163387
! Fit after  self-cal, rms=0.077707Jy  sigma=1.162092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000374758 Jy
! Component: 100  -  total flux cleaned = 0.000371424 Jy
! Component: 150  -  total flux cleaned = 0.000398112 Jy
! Component: 200  -  total flux cleaned = 0.000450028 Jy
! Total flux subtracted in 200 components = 0.000450028 Jy
! Clean residual min=-0.003470 max=0.003238 Jy/beam
! Clean residual mean=0.000001 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.0587356 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.0587356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077687Jy  sigma=1.161725
! Fit after  self-cal, rms=0.077686Jy  sigma=1.161666
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077686Jy  sigma=1.161666
! Fit after  self-cal, rms=0.077324Jy  sigma=1.160977
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.796 mas, bmaj=21.27 mas, bpa=11.32 degrees
! Estimated noise=0.804871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000473782 Jy
! Component: 100  -  total flux cleaned = -0.000507394 Jy
! Component: 150  -  total flux cleaned = -0.000562016 Jy
! Component: 200  -  total flux cleaned = -0.000486655 Jy
! Total flux subtracted in 200 components = -0.000486655 Jy
! Clean residual min=-0.003283 max=0.003231 Jy/beam
! Clean residual mean=0.000002 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.0582489 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.0582489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077303Jy  sigma=1.160589
! Fit after  self-cal, rms=0.077389Jy  sigma=1.159573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339383 Jy
! Component: 100  -  total flux cleaned = 0.000255703 Jy
! Component: 150  -  total flux cleaned = 0.000280749 Jy
! Component: 200  -  total flux cleaned = 0.000328111 Jy
! Total flux subtracted in 200 components = 0.000328111 Jy
! Clean residual min=-0.003533 max=0.003342 Jy/beam
! Clean residual mean=0.000002 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.058577 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.058577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077372Jy  sigma=1.159256
! Fit after  self-cal, rms=0.077374Jy  sigma=1.159204
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077374Jy  sigma=1.159204
! Fit after  self-cal, rms=0.077496Jy  sigma=1.159042
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.357 mas, bmaj=24.43 mas, bpa=3.002 degrees
! Estimated noise=0.884373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000556093 Jy
! Component: 100  -  total flux cleaned = -0.000631754 Jy
! Component: 150  -  total flux cleaned = -0.000633346 Jy
! Component: 200  -  total flux cleaned = -0.000633992 Jy
! Total flux subtracted in 200 components = -0.000633992 Jy
! Clean residual min=-0.002810 max=0.003036 Jy/beam
! Clean residual mean=0.000005 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.057943 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 0.057943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077489Jy  sigma=1.158885
! Fit after  self-cal, rms=0.077514Jy  sigma=1.158777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000321644 Jy
! Component: 100  -  total flux cleaned = -0.000267044 Jy
! Component: 150  -  total flux cleaned = -0.000250802 Jy
! Component: 200  -  total flux cleaned = -0.000221041 Jy
! Total flux subtracted in 200 components = -0.000221041 Jy
! Clean residual min=-0.002750 max=0.003020 Jy/beam
! Clean residual mean=0.000005 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.057722 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 106 components and 0.057722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077512Jy  sigma=1.158747
! Fit after  self-cal, rms=0.077508Jy  sigma=1.158704
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.776 mas, bmaj=21.44 mas, bpa=11.4 degrees
! Estimated noise=0.802319 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.776 x 21.44 at 11.4 degrees (North through East)
! Clean map  min=-0.0035322  max=0.053445 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.842 mas, bmaj=21.6 mas, bpa=12.42 degrees
! Estimated noise=1.24947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404494 Jy
! Component: 100  -  total flux cleaned = 0.0520335 Jy
! Component: 150  -  total flux cleaned = 0.055365 Jy
! Component: 200  -  total flux cleaned = 0.0568373 Jy
! Total flux subtracted in 200 components = 0.0568373 Jy
! Clean residual min=-0.004698 max=0.004594 Jy/beam
! Clean residual mean=0.000000 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.0568373 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0568373 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.776 mas, bmaj=21.44 mas, bpa=11.4 degrees
! Estimated noise=0.802319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168925 Jy
! Component: 100  -  total flux cleaned = 0.00159203 Jy
! Component: 150  -  total flux cleaned = 0.00145986 Jy
! Component: 200  -  total flux cleaned = 0.00129918 Jy
! Total flux subtracted in 200 components = 0.00129918 Jy
! Clean residual min=-0.003717 max=0.003401 Jy/beam
! Clean residual mean=-0.000000 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.0581364 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.0581364 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.357 mas, bmaj=24.43 mas, bpa=3.002 degrees
! Estimated noise=0.884373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000357362 Jy
! Component: 100  -  total flux cleaned = -0.000473474 Jy
! Component: 150  -  total flux cleaned = -0.000535352 Jy
! Component: 200  -  total flux cleaned = -0.000587511 Jy
! Total flux subtracted in 200 components = -0.000587511 Jy
! Clean residual min=-0.002741 max=0.003183 Jy/beam
! Clean residual mean=0.000003 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.0575489 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.19338e-05 Jy
! Component: 100  -  total flux cleaned = -6.14356e-05 Jy
! Component: 150  -  total flux cleaned = -7.84779e-05 Jy
! Component: 200  -  total flux cleaned = -7.88335e-05 Jy
! Total flux subtracted in 200 components = -7.88335e-05 Jy
! Clean residual min=-0.002719 max=0.003133 Jy/beam
! Clean residual mean=0.000004 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.0574701 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 59 components and 0.0574701 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.776 mas, bmaj=21.44 mas, bpa=11.4 degrees
! Estimated noise=0.802319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.50432e-06 Jy
! Component: 100  -  total flux cleaned = 8.8454e-06 Jy
! Component: 150  -  total flux cleaned = 3.95649e-05 Jy
! Component: 200  -  total flux cleaned = 3.86292e-05 Jy
! Total flux subtracted in 200 components = 3.86292e-05 Jy
! Clean residual min=-0.003460 max=0.003189 Jy/beam
! Clean residual mean=0.000003 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.0575087 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.0575087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077517Jy  sigma=1.158977
! Fit after  self-cal, rms=0.077495Jy  sigma=1.158821
wmodel J1210-2711_S_a_map.mod
! Writing 71 model components to file: J1210-2711_S_a_map.mod
wobs   J1210-2711_S_a_uvs.fits
! Writing UV FITS file: J1210-2711_S_a_uvs.fits
wwins  J1210-2711_S_a_map.win
! wwins: Wrote 1 windows to J1210-2711_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.67591e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128411 Jy
! Component: 150  -  total flux cleaned = -1.24114e-05 Jy
! Component: 200  -  total flux cleaned = -0.000148292 Jy
! Component: 250  -  total flux cleaned = -0.000403427 Jy
! Component: 300  -  total flux cleaned = -0.00060411 Jy
! Component: 350  -  total flux cleaned = -0.000719201 Jy
! Component: 400  -  total flux cleaned = -0.00089974 Jy
! Component: 450  -  total flux cleaned = -0.00093469 Jy
! Component: 500  -  total flux cleaned = -0.00117012 Jy
! Component: 550  -  total flux cleaned = -0.00133022 Jy
! Component: 600  -  total flux cleaned = -0.00145422 Jy
! Component: 650  -  total flux cleaned = -0.00172171 Jy
! Component: 700  -  total flux cleaned = -0.00192255 Jy
! Component: 750  -  total flux cleaned = -0.0020615 Jy
! Component: 800  -  total flux cleaned = -0.00230327 Jy
! Component: 850  -  total flux cleaned = -0.00240777 Jy
! Component: 900  -  total flux cleaned = -0.0025584 Jy
! Component: 950  -  total flux cleaned = -0.00265612 Jy
! Component: 1000  -  total flux cleaned = -0.00286842 Jy
! Component: 1050  -  total flux cleaned = -0.00289098 Jy
! Component: 1100  -  total flux cleaned = -0.00306918 Jy
! Component: 1150  -  total flux cleaned = -0.00313457 Jy
! Component: 1200  -  total flux cleaned = -0.00324086 Jy
! Component: 1250  -  total flux cleaned = -0.00334359 Jy
! Component: 1300  -  total flux cleaned = -0.00340362 Jy
! Component: 1350  -  total flux cleaned = -0.0034628 Jy
! Component: 1400  -  total flux cleaned = -0.00357775 Jy
! Component: 1450  -  total flux cleaned = -0.00372841 Jy
! Component: 1500  -  total flux cleaned = -0.00383884 Jy
! Component: 1550  -  total flux cleaned = -0.00392948 Jy
! Component: 1600  -  total flux cleaned = -0.00398262 Jy
! Component: 1650  -  total flux cleaned = -0.00406973 Jy
! Component: 1700  -  total flux cleaned = -0.00417246 Jy
! Component: 1750  -  total flux cleaned = -0.00427297 Jy
! Component: 1800  -  total flux cleaned = -0.0043551 Jy
! Component: 1850  -  total flux cleaned = -0.00441976 Jy
! Component: 1900  -  total flux cleaned = -0.0045153 Jy
! Component: 1950  -  total flux cleaned = -0.00456224 Jy
! Component: 2000  -  total flux cleaned = -0.00462401 Jy
! Component: 2050  -  total flux cleaned = -0.00465455 Jy
! Component: 2100  -  total flux cleaned = -0.00469935 Jy
! Component: 2150  -  total flux cleaned = -0.00469933 Jy
! Component: 2200  -  total flux cleaned = -0.00472851 Jy
! Component: 2250  -  total flux cleaned = -0.00475719 Jy
! Component: 2300  -  total flux cleaned = -0.00481365 Jy
! Component: 2350  -  total flux cleaned = -0.00485547 Jy
! Component: 2400  -  total flux cleaned = -0.0049106 Jy
! Component: 2450  -  total flux cleaned = -0.00499265 Jy
! Component: 2500  -  total flux cleaned = -0.00503322 Jy
! Component: 2550  -  total flux cleaned = -0.00506009 Jy
! Component: 2600  -  total flux cleaned = -0.00512647 Jy
! Component: 2650  -  total flux cleaned = -0.00517905 Jy
! Component: 2700  -  total flux cleaned = -0.00526984 Jy
! Component: 2750  -  total flux cleaned = -0.00526992 Jy
! Component: 2800  -  total flux cleaned = -0.00532096 Jy
! Component: 2850  -  total flux cleaned = -0.00535873 Jy
! Component: 2900  -  total flux cleaned = -0.00539627 Jy
! Component: 2950  -  total flux cleaned = -0.00545829 Jy
! Component: 3000  -  total flux cleaned = -0.00549523 Jy
! Component: 3050  -  total flux cleaned = -0.00553206 Jy
! Component: 3100  -  total flux cleaned = -0.00558087 Jy
! Component: 3150  -  total flux cleaned = -0.00561709 Jy
! Component: 3200  -  total flux cleaned = -0.00567747 Jy
! Component: 3250  -  total flux cleaned = -0.00573763 Jy
! Component: 3300  -  total flux cleaned = -0.00573763 Jy
! Component: 3350  -  total flux cleaned = -0.0057734 Jy
! Component: 3400  -  total flux cleaned = -0.00578531 Jy
! Component: 3450  -  total flux cleaned = -0.00578523 Jy
! Component: 3500  -  total flux cleaned = -0.00578524 Jy
! Component: 3550  -  total flux cleaned = -0.00580894 Jy
! Component: 3600  -  total flux cleaned = -0.00578532 Jy
! Component: 3650  -  total flux cleaned = -0.00579716 Jy
! Component: 3700  -  total flux cleaned = -0.00580904 Jy
! Component: 3750  -  total flux cleaned = -0.00583266 Jy
! Component: 3800  -  total flux cleaned = -0.00586797 Jy
! Component: 3850  -  total flux cleaned = -0.00585617 Jy
! Component: 3900  -  total flux cleaned = -0.0058562 Jy
! Component: 3950  -  total flux cleaned = -0.00586794 Jy
! Component: 4000  -  total flux cleaned = -0.00587969 Jy
! Component: 4050  -  total flux cleaned = -0.00589137 Jy
! Total flux subtracted in 4096 components = -0.00591498 Jy
! Clean residual min=-0.000709 max=0.000708 Jy/beam
! Clean residual mean=0.000002 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0515938 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 329 components and 0.0515937 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1210-2711_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.776 x 21.44 at 11.4 degrees (North through East)
! Clean map  min=-0.0033085  max=0.05182 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1210-2711_S_a_map.fits
wmodel /vlbi/uf001/uva//J1210-2711_S_a_map.mod
! Writing 329 model components to file: /vlbi/uf001/uva//J1210-2711_S_a_map.mod
wobs   /vlbi/uf001/uva//J1210-2711_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1210-2711_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J1210-2711_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1210-2711_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0518198 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210969 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.22136 1.22136 2.44272 4.88544 9.77088 19.5418 39.0835 78.167
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.051 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  245.627 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1210-2711_S_a_dfm.log closed on Mon Jan 14 01:42:24 2019