! Started logfile: /vlbi/uf001/uva//J1208-1421_S_dfm.log on Mon Jan 14 01:40:26 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1208-1421_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1208-1421_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991667 visibilities/baseline/integration-bin. ! Found source: J1208-1421 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6426 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1208-1421_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.019612Jy sigma=17.320406 ! Fit after self-cal, rms=0.884513Jy sigma=14.930080 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=6.634 mas, bpa=-4.002 degrees ! Estimated noise=0.761424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0917577 Jy ! Component: 100 - total flux cleaned = 0.11358 Jy ! Total flux subtracted in 100 components = 0.11358 Jy ! Clean residual min=-0.005519 max=0.008684 Jy/beam ! Clean residual mean=-0.000039 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.11358 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.11358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082263Jy sigma=1.267796 ! Fit after self-cal, rms=0.082258Jy sigma=1.267582 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=7.677 mas, bpa=-3.624 degrees ! Estimated noise=0.532607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112579 Jy ! Component: 100 - total flux cleaned = 0.0164073 Jy ! Component: 150 - total flux cleaned = 0.0190367 Jy ! Component: 200 - total flux cleaned = 0.0204123 Jy ! Total flux subtracted in 200 components = 0.0204123 Jy ! Clean residual min=-0.004073 max=0.005313 Jy/beam ! Clean residual mean=-0.000025 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.133992 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.133992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081185Jy sigma=1.236621 ! Fit after self-cal, rms=0.081196Jy sigma=1.236341 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 7.677 at -3.624 degrees (North through East) ! Clean map min=-0.0038546 max=0.11883 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 1.03 KP 1.00 ! LA 0.92 MK 1.04 NL 1.08 OV 1.01 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.91 HN 1.10 KP 0.99 ! LA 0.91 MK 1.01 NL 1.16 OV 0.99 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.02 KP 0.97 ! LA 0.95 MK 0.95 NL 1.11 OV 1.00 ! PT 0.94 SC 1.00 ! ! ! Fit before self-cal, rms=0.081196Jy sigma=1.236341 ! Fit after self-cal, rms=0.082519Jy sigma=1.223208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=7.739 mas, bpa=-3.379 degrees ! Estimated noise=0.529521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166518 Jy ! Component: 100 - total flux cleaned = -0.00218431 Jy ! Component: 150 - total flux cleaned = -0.00229129 Jy ! Component: 200 - total flux cleaned = -0.00236255 Jy ! Total flux subtracted in 200 components = -0.00236255 Jy ! Clean residual min=-0.003238 max=0.003201 Jy/beam ! Clean residual mean=-0.000000 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.13163 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.13163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082470Jy sigma=1.222631 ! Fit after self-cal, rms=0.082565Jy sigma=1.222334 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082565Jy sigma=1.222334 ! Fit after self-cal, rms=0.088225Jy sigma=1.211386 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.789 mas, bpa=-2.979 degrees ! Estimated noise=0.531152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000264329 Jy ! Component: 100 - total flux cleaned = -0.000175148 Jy ! Component: 150 - total flux cleaned = -0.000149984 Jy ! Component: 200 - total flux cleaned = -0.000126842 Jy ! Total flux subtracted in 200 components = -0.000126842 Jy ! Clean residual min=-0.002305 max=0.003358 Jy/beam ! Clean residual mean=-0.000000 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.131503 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.131503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088209Jy sigma=1.211024 ! Fit after self-cal, rms=0.088302Jy sigma=1.210803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285079 Jy ! Component: 100 - total flux cleaned = 0.0036745 Jy ! Component: 150 - total flux cleaned = 0.00385387 Jy ! Component: 200 - total flux cleaned = 0.00400868 Jy ! Total flux subtracted in 200 components = 0.00400868 Jy ! Clean residual min=-0.002095 max=0.002370 Jy/beam ! Clean residual mean=-0.000001 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.135512 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.135512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088202Jy sigma=1.208785 ! Fit after self-cal, rms=0.088195Jy sigma=1.208692 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088195Jy sigma=1.208692 ! Fit after self-cal, rms=0.088316Jy sigma=1.208586 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.795 mas, bpa=-3.033 degrees ! Estimated noise=0.529938 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00056416 Jy ! Component: 100 - total flux cleaned = 0.000635722 Jy ! Component: 150 - total flux cleaned = 0.000667441 Jy ! Component: 200 - total flux cleaned = 0.000725586 Jy ! Total flux subtracted in 200 components = 0.000725586 Jy ! Clean residual min=-0.002123 max=0.002302 Jy/beam ! Clean residual mean=-0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.136237 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.136237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088292Jy sigma=1.208109 ! Fit after self-cal, rms=0.088294Jy sigma=1.208096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116519 Jy ! Component: 100 - total flux cleaned = 0.000141542 Jy ! Component: 150 - total flux cleaned = 0.000191296 Jy ! Component: 200 - total flux cleaned = 0.000259496 Jy ! Total flux subtracted in 200 components = 0.000259496 Jy ! Clean residual min=-0.002174 max=0.002273 Jy/beam ! Clean residual mean=-0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.136497 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.136497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088281Jy sigma=1.207849 ! Fit after self-cal, rms=0.088279Jy sigma=1.207844 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088279Jy sigma=1.207844 ! Fit after self-cal, rms=0.088199Jy sigma=1.207814 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.655 mas, bmaj=14.3 mas, bpa=1.095 degrees ! Estimated noise=0.67103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154442 Jy ! Component: 100 - total flux cleaned = -0.000133559 Jy ! Component: 150 - total flux cleaned = -8.20398e-05 Jy ! Component: 200 - total flux cleaned = -4.24638e-05 Jy ! Total flux subtracted in 200 components = -4.24638e-05 Jy ! Clean residual min=-0.002168 max=0.002392 Jy/beam ! Clean residual mean=-0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.136454 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.136454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088198Jy sigma=1.207741 ! Fit after self-cal, rms=0.088193Jy sigma=1.207681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.04665e-06 Jy ! Component: 100 - total flux cleaned = -8.08889e-06 Jy ! Component: 150 - total flux cleaned = 2.87077e-05 Jy ! Component: 200 - total flux cleaned = 3.90378e-05 Jy ! Total flux subtracted in 200 components = 3.90378e-05 Jy ! Clean residual min=-0.002148 max=0.002349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.136493 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.136493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088194Jy sigma=1.207678 ! Fit after self-cal, rms=0.088188Jy sigma=1.207622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.796 mas, bpa=-3.053 degrees ! Estimated noise=0.529142 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.796 at -3.053 degrees (North through East) ! Clean map min=-0.0020913 max=0.11884 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=6.715 mas, bpa=-3.359 degrees ! Estimated noise=0.763362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0918223 Jy ! Component: 100 - total flux cleaned = 0.113428 Jy ! Component: 150 - total flux cleaned = 0.12225 Jy ! Component: 200 - total flux cleaned = 0.127108 Jy ! Total flux subtracted in 200 components = 0.127108 Jy ! Clean residual min=-0.003441 max=0.003523 Jy/beam ! Clean residual mean=-0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.127108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.127108 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.796 mas, bpa=-3.053 degrees ! Estimated noise=0.529142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353965 Jy ! Component: 100 - total flux cleaned = 0.00567801 Jy ! Component: 150 - total flux cleaned = 0.00673845 Jy ! Component: 200 - total flux cleaned = 0.00739729 Jy ! Total flux subtracted in 200 components = 0.00739729 Jy ! Clean residual min=-0.002170 max=0.002159 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.134505 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 52 components and 0.134505 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.655 mas, bmaj=14.3 mas, bpa=1.095 degrees ! Estimated noise=0.67103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140483 Jy ! Component: 100 - total flux cleaned = 0.00203996 Jy ! Component: 150 - total flux cleaned = 0.00221026 Jy ! Component: 200 - total flux cleaned = 0.0023358 Jy ! Total flux subtracted in 200 components = 0.0023358 Jy ! Clean residual min=-0.002137 max=0.001970 Jy/beam ! Clean residual mean=-0.000002 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.136841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.38239e-05 Jy ! Component: 100 - total flux cleaned = 0.000123312 Jy ! Component: 150 - total flux cleaned = 0.000168162 Jy ! Component: 200 - total flux cleaned = 0.000195682 Jy ! Total flux subtracted in 200 components = 0.000195682 Jy ! Clean residual min=-0.002157 max=0.001948 Jy/beam ! Clean residual mean=-0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.137037 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 84 components and 0.137037 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.796 mas, bpa=-3.053 degrees ! Estimated noise=0.529142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116853 Jy ! Component: 100 - total flux cleaned = 0.000194793 Jy ! Component: 150 - total flux cleaned = 0.000229625 Jy ! Component: 200 - total flux cleaned = 0.000293325 Jy ! Total flux subtracted in 200 components = 0.000293325 Jy ! Clean residual min=-0.002167 max=0.001951 Jy/beam ! Clean residual mean=0.000000 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.13733 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.13733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088169Jy sigma=1.207331 ! Fit after self-cal, rms=0.088157Jy sigma=1.207226 wmodel J1208-1421_S_map.mod ! Writing 100 model components to file: J1208-1421_S_map.mod wobs J1208-1421_S_uvs.fits ! Writing UV FITS file: J1208-1421_S_uvs.fits wwins J1208-1421_S_map.win ! wwins: Wrote 3 windows to J1208-1421_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017171 Jy ! Component: 100 - total flux cleaned = -0.000206854 Jy ! Component: 150 - total flux cleaned = -0.000206995 Jy ! Component: 200 - total flux cleaned = -0.000271847 Jy ! Component: 250 - total flux cleaned = -0.000396344 Jy ! Component: 300 - total flux cleaned = -0.000517046 Jy ! Component: 350 - total flux cleaned = -0.000691909 Jy ! Component: 400 - total flux cleaned = -0.000833473 Jy ! Component: 450 - total flux cleaned = -0.000833814 Jy ! Component: 500 - total flux cleaned = -0.00094202 Jy ! Component: 550 - total flux cleaned = -0.00099522 Jy ! Component: 600 - total flux cleaned = -0.00104692 Jy ! Component: 650 - total flux cleaned = -0.00104684 Jy ! Component: 700 - total flux cleaned = -0.00117277 Jy ! Component: 750 - total flux cleaned = -0.00114822 Jy ! Component: 800 - total flux cleaned = -0.00127055 Jy ! Component: 850 - total flux cleaned = -0.00124696 Jy ! Component: 900 - total flux cleaned = -0.00131789 Jy ! Component: 950 - total flux cleaned = -0.00129454 Jy ! Component: 1000 - total flux cleaned = -0.00138682 Jy ! Component: 1050 - total flux cleaned = -0.00145501 Jy ! Component: 1100 - total flux cleaned = -0.00149981 Jy ! Component: 1150 - total flux cleaned = -0.00161022 Jy ! Component: 1200 - total flux cleaned = -0.00156669 Jy ! Component: 1250 - total flux cleaned = -0.00158867 Jy ! Component: 1300 - total flux cleaned = -0.00167376 Jy ! Component: 1350 - total flux cleaned = -0.0016946 Jy ! Component: 1400 - total flux cleaned = -0.0018194 Jy ! Component: 1450 - total flux cleaned = -0.00183989 Jy ! Component: 1500 - total flux cleaned = -0.00196177 Jy ! Component: 1550 - total flux cleaned = -0.00196172 Jy ! Component: 1600 - total flux cleaned = -0.00206133 Jy ! Component: 1650 - total flux cleaned = -0.00213959 Jy ! Component: 1700 - total flux cleaned = -0.00219804 Jy ! Component: 1750 - total flux cleaned = -0.00223612 Jy ! Component: 1800 - total flux cleaned = -0.00227436 Jy ! Component: 1850 - total flux cleaned = -0.00240649 Jy ! Component: 1900 - total flux cleaned = -0.00248126 Jy ! Component: 1950 - total flux cleaned = -0.00253659 Jy ! Component: 2000 - total flux cleaned = -0.00257358 Jy ! Component: 2050 - total flux cleaned = -0.00264625 Jy ! Component: 2100 - total flux cleaned = -0.0026823 Jy ! Component: 2150 - total flux cleaned = -0.00280696 Jy ! Component: 2200 - total flux cleaned = -0.00285966 Jy ! Component: 2250 - total flux cleaned = -0.00289467 Jy ! Component: 2300 - total flux cleaned = -0.00296374 Jy ! Component: 2350 - total flux cleaned = -0.00294658 Jy ! Component: 2400 - total flux cleaned = -0.00296376 Jy ! Component: 2450 - total flux cleaned = -0.00299787 Jy ! Component: 2500 - total flux cleaned = -0.00311513 Jy ! Component: 2550 - total flux cleaned = -0.00309837 Jy ! Component: 2600 - total flux cleaned = -0.00316425 Jy ! Component: 2650 - total flux cleaned = -0.00318061 Jy ! Component: 2700 - total flux cleaned = -0.00326146 Jy ! Component: 2750 - total flux cleaned = -0.00327767 Jy ! Component: 2800 - total flux cleaned = -0.00330944 Jy ! Component: 2850 - total flux cleaned = -0.00335673 Jy ! Component: 2900 - total flux cleaned = -0.00340375 Jy ! Component: 2950 - total flux cleaned = -0.00343499 Jy ! Component: 3000 - total flux cleaned = -0.00345047 Jy ! Component: 3050 - total flux cleaned = -0.00351171 Jy ! Component: 3100 - total flux cleaned = -0.00354188 Jy ! Component: 3150 - total flux cleaned = -0.00355691 Jy ! Component: 3200 - total flux cleaned = -0.00360203 Jy ! Component: 3250 - total flux cleaned = -0.00363183 Jy ! Component: 3300 - total flux cleaned = -0.00367597 Jy ! Component: 3350 - total flux cleaned = -0.00373446 Jy ! Component: 3400 - total flux cleaned = -0.00373425 Jy ! Component: 3450 - total flux cleaned = -0.00377742 Jy ! Component: 3500 - total flux cleaned = -0.00382025 Jy ! Component: 3550 - total flux cleaned = -0.0038203 Jy ! Component: 3600 - total flux cleaned = -0.00387664 Jy ! Component: 3650 - total flux cleaned = -0.00389063 Jy ! Component: 3700 - total flux cleaned = -0.00391854 Jy ! Component: 3750 - total flux cleaned = -0.00397386 Jy ! Component: 3800 - total flux cleaned = -0.00400135 Jy ! Component: 3850 - total flux cleaned = -0.00402871 Jy ! Component: 3900 - total flux cleaned = -0.00402876 Jy ! Component: 3950 - total flux cleaned = -0.00406936 Jy ! Component: 4000 - total flux cleaned = -0.00410949 Jy ! Component: 4050 - total flux cleaned = -0.00414952 Jy ! Total flux subtracted in 4096 components = -0.0042158 Jy ! Clean residual min=-0.000959 max=0.000699 Jy/beam ! Clean residual mean=0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.133114 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 367 components and 0.133114 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1208-1421_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.796 at -3.053 degrees (North through East) ! Clean map min=-0.0019994 max=0.1182 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1208-1421_S_map.fits wmodel /vlbi/uf001/uva//J1208-1421_S_map.mod ! Writing 367 model components to file: /vlbi/uf001/uva//J1208-1421_S_map.mod wobs /vlbi/uf001/uva//J1208-1421_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1208-1421_S_uvs.fits wwins /vlbi/uf001/uva//J1208-1421_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1208-1421_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.118202 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236153 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.599361 0.599361 1.19872 2.39744 4.79489 9.58977 19.1795 38.3591 76.7182 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.118 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 500.533 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1208-1421_S_dfm.log closed on Mon Jan 14 01:40:30 2019