! Started logfile: /vlbi/uf001/uva//J1155-3107_S_dfm.log on Mon Jan 14 01:34:39 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1155-3107_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1155-3107_S_uva.fits ! AN table 1: 48 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.997024 visibilities/baseline/integration-bin. ! Found source: J1155-3107 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4020 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1155-3107_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.012380Jy sigma=13.377842 ! Fit after self-cal, rms=0.880423Jy sigma=11.509564 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.221 mas, bmaj=6.214 mas, bpa=-2.454 degrees ! Estimated noise=1.33926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0999091 Jy ! Component: 100 - total flux cleaned = 0.122309 Jy ! Total flux subtracted in 100 components = 0.122309 Jy ! Clean residual min=-0.009366 max=0.012257 Jy/beam ! Clean residual mean=-0.000078 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.122309 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.122309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105744Jy sigma=1.255011 ! Fit after self-cal, rms=0.105335Jy sigma=1.251569 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.032 mas, bpa=-2.944 degrees ! Estimated noise=0.864463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0099168 Jy ! Component: 100 - total flux cleaned = 0.0154101 Jy ! Component: 150 - total flux cleaned = 0.0170487 Jy ! Component: 200 - total flux cleaned = 0.0177747 Jy ! Total flux subtracted in 200 components = 0.0177747 Jy ! Clean residual min=-0.008419 max=0.010115 Jy/beam ! Clean residual mean=-0.000085 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.140083 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.140083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104456Jy sigma=1.236375 ! Fit after self-cal, rms=0.104450Jy sigma=1.236114 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.653 x 7.032 at -2.944 degrees (North through East) ! Clean map min=-0.008252 max=0.12549 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 HN 1.33 LA 0.84 MK 0.99 ! NL 1.12 OV 1.03 PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 1.48 LA 0.89 MK 0.98 ! NL 1.07 OV 0.95 PT 1.03 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 1.48 LA 0.93 MK 0.98 ! NL 1.10 OV 1.03 PT 0.96 SC 0.93 ! ! ! Fit before self-cal, rms=0.104450Jy sigma=1.236114 ! Fit after self-cal, rms=0.111803Jy sigma=1.197003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.934 mas, bpa=-2.17 degrees ! Estimated noise=0.86004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000973141 Jy ! Component: 100 - total flux cleaned = -0.00111427 Jy ! Component: 150 - total flux cleaned = -0.00115342 Jy ! Component: 200 - total flux cleaned = -0.00119012 Jy ! Total flux subtracted in 200 components = -0.00119012 Jy ! Clean residual min=-0.004070 max=0.004536 Jy/beam ! Clean residual mean=-0.000024 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.138893 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.138893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.111765Jy sigma=1.196553 ! Fit after self-cal, rms=0.112181Jy sigma=1.195018 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112181Jy sigma=1.195018 ! Fit after self-cal, rms=0.117129Jy sigma=1.188997 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=6.956 mas, bpa=-2.105 degrees ! Estimated noise=0.862081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258289 Jy ! Component: 100 - total flux cleaned = -0.000332777 Jy ! Component: 150 - total flux cleaned = -0.000366658 Jy ! Component: 200 - total flux cleaned = -0.000399036 Jy ! Total flux subtracted in 200 components = -0.000399036 Jy ! Clean residual min=-0.003433 max=0.004328 Jy/beam ! Clean residual mean=-0.000016 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.138494 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 36 components and 0.138494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.117104Jy sigma=1.188665 ! Fit after self-cal, rms=0.117172Jy sigma=1.188559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, -100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116768 Jy ! Component: 100 - total flux cleaned = 0.000805167 Jy ! Component: 150 - total flux cleaned = 0.000504124 Jy ! Component: 200 - total flux cleaned = 0.000316839 Jy ! Total flux subtracted in 200 components = 0.000316839 Jy ! Clean residual min=-0.003441 max=0.003432 Jy/beam ! Clean residual mean=-0.000018 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.138811 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.138811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.116955Jy sigma=1.186055 ! Fit after self-cal, rms=0.116940Jy sigma=1.185857 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.116940Jy sigma=1.185857 ! Fit after self-cal, rms=0.120880Jy sigma=1.184714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=6.967 mas, bpa=-2.136 degrees ! Estimated noise=0.861866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240499 Jy ! Component: 100 - total flux cleaned = 5.44233e-05 Jy ! Component: 150 - total flux cleaned = -5.69656e-05 Jy ! Component: 200 - total flux cleaned = -0.000206995 Jy ! Total flux subtracted in 200 components = -0.000206995 Jy ! Clean residual min=-0.003323 max=0.003360 Jy/beam ! Clean residual mean=-0.000007 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.138604 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.138604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.120787Jy sigma=1.183992 ! Fit after self-cal, rms=0.120836Jy sigma=1.183913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.64675e-05 Jy ! Component: 100 - total flux cleaned = -0.000266045 Jy ! Component: 150 - total flux cleaned = -0.000348849 Jy ! Component: 200 - total flux cleaned = -0.000537438 Jy ! Total flux subtracted in 200 components = -0.000537438 Jy ! Clean residual min=-0.003330 max=0.003250 Jy/beam ! Clean residual mean=-0.000007 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.138067 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.138067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.120789Jy sigma=1.183585 ! Fit after self-cal, rms=0.120794Jy sigma=1.183569 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.120794Jy sigma=1.183569 ! Fit after self-cal, rms=0.121252Jy sigma=1.183501 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.829 mas, bmaj=17.77 mas, bpa=3.79 degrees ! Estimated noise=1.17062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172576 Jy ! Component: 100 - total flux cleaned = 0.00011545 Jy ! Component: 150 - total flux cleaned = 3.31401e-05 Jy ! Component: 200 - total flux cleaned = -4.16525e-05 Jy ! Total flux subtracted in 200 components = -4.16525e-05 Jy ! Clean residual min=-0.003996 max=0.003329 Jy/beam ! Clean residual mean=-0.000016 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.138025 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.138025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121236Jy sigma=1.183408 ! Fit after self-cal, rms=0.121244Jy sigma=1.183401 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104889 Jy ! Component: 100 - total flux cleaned = -0.000172384 Jy ! Component: 150 - total flux cleaned = -0.000184323 Jy ! Component: 200 - total flux cleaned = -0.000183886 Jy ! Total flux subtracted in 200 components = -0.000183886 Jy ! Clean residual min=-0.004006 max=0.003312 Jy/beam ! Clean residual mean=-0.000017 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.137841 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.137841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121236Jy sigma=1.183361 ! Fit after self-cal, rms=0.121236Jy sigma=1.183359 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=6.962 mas, bpa=-2.139 degrees ! Estimated noise=0.862243 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.679 x 6.962 at -2.139 degrees (North through East) ! Clean map min=-0.0042088 max=0.12602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=6.118 mas, bpa=-1.329 degrees ! Estimated noise=1.31616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980508 Jy ! Component: 100 - total flux cleaned = 0.119777 Jy ! Component: 150 - total flux cleaned = 0.128128 Jy ! Component: 200 - total flux cleaned = 0.130346 Jy ! Total flux subtracted in 200 components = 0.130346 Jy ! Clean residual min=-0.006261 max=0.005590 Jy/beam ! Clean residual mean=-0.000025 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.130346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.130346 Jy ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=6.962 mas, bpa=-2.139 degrees ! Estimated noise=0.862243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288621 Jy ! Component: 100 - total flux cleaned = 0.00434 Jy ! Component: 150 - total flux cleaned = 0.00524322 Jy ! Component: 200 - total flux cleaned = 0.005582 Jy ! Total flux subtracted in 200 components = 0.005582 Jy ! Clean residual min=-0.003488 max=0.003480 Jy/beam ! Clean residual mean=-0.000018 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.135928 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.135928 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.829 mas, bmaj=17.77 mas, bpa=3.79 degrees ! Estimated noise=1.17062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143227 Jy ! Component: 100 - total flux cleaned = 0.0020419 Jy ! Component: 150 - total flux cleaned = 0.00204523 Jy ! Component: 200 - total flux cleaned = 0.00208244 Jy ! Total flux subtracted in 200 components = 0.00208244 Jy ! Clean residual min=-0.003951 max=0.003316 Jy/beam ! Clean residual mean=-0.000024 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.138011 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.22264e-07 Jy ! Component: 100 - total flux cleaned = 3.17851e-05 Jy ! Component: 150 - total flux cleaned = 5.90996e-05 Jy ! Component: 200 - total flux cleaned = 5.80802e-05 Jy ! Total flux subtracted in 200 components = 5.80802e-05 Jy ! Clean residual min=-0.004000 max=0.003276 Jy/beam ! Clean residual mean=-0.000021 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.138069 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 0.138069 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=6.962 mas, bpa=-2.139 degrees ! Estimated noise=0.862243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438732 Jy ! Component: 100 - total flux cleaned = -0.000555318 Jy ! Component: 150 - total flux cleaned = -0.00066054 Jy ! Component: 200 - total flux cleaned = -0.000754423 Jy ! Total flux subtracted in 200 components = -0.000754423 Jy ! Clean residual min=-0.003421 max=0.003198 Jy/beam ! Clean residual mean=-0.000008 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.137314 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.137314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121244Jy sigma=1.183687 ! Fit after self-cal, rms=0.121247Jy sigma=1.183481 wmodel J1155-3107_S_map.mod ! Writing 92 model components to file: J1155-3107_S_map.mod wobs J1155-3107_S_uvs.fits ! Writing UV FITS file: J1155-3107_S_uvs.fits wwins J1155-3107_S_map.win ! wwins: Wrote 3 windows to J1155-3107_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212169 Jy ! Component: 100 - total flux cleaned = 6.87439e-05 Jy ! Component: 150 - total flux cleaned = 0.000123184 Jy ! Component: 200 - total flux cleaned = 2.4157e-05 Jy ! Component: 250 - total flux cleaned = -0.000118458 Jy ! Component: 300 - total flux cleaned = -0.000485635 Jy ! Component: 350 - total flux cleaned = -0.000751064 Jy ! Component: 400 - total flux cleaned = -0.00101036 Jy ! Component: 450 - total flux cleaned = -0.00117924 Jy ! Component: 500 - total flux cleaned = -0.00146604 Jy ! Component: 550 - total flux cleaned = -0.00154569 Jy ! Component: 600 - total flux cleaned = -0.0016242 Jy ! Component: 650 - total flux cleaned = -0.00185164 Jy ! Component: 700 - total flux cleaned = -0.00188808 Jy ! Component: 750 - total flux cleaned = -0.00196081 Jy ! Component: 800 - total flux cleaned = -0.00203167 Jy ! Component: 850 - total flux cleaned = -0.00203173 Jy ! Component: 900 - total flux cleaned = -0.00203214 Jy ! Component: 950 - total flux cleaned = -0.00189751 Jy ! Component: 1000 - total flux cleaned = -0.00193087 Jy ! Component: 1050 - total flux cleaned = -0.00202764 Jy ! Component: 1100 - total flux cleaned = -0.00199551 Jy ! Component: 1150 - total flux cleaned = -0.00193195 Jy ! Component: 1200 - total flux cleaned = -0.00187029 Jy ! Component: 1250 - total flux cleaned = -0.00180971 Jy ! Component: 1300 - total flux cleaned = -0.00174979 Jy ! Component: 1350 - total flux cleaned = -0.00172003 Jy ! Component: 1400 - total flux cleaned = -0.00166131 Jy ! Component: 1450 - total flux cleaned = -0.00154662 Jy ! Component: 1500 - total flux cleaned = -0.00146185 Jy ! Component: 1550 - total flux cleaned = -0.00140544 Jy ! Component: 1600 - total flux cleaned = -0.00126697 Jy ! Component: 1650 - total flux cleaned = -0.00123945 Jy ! Component: 1700 - total flux cleaned = -0.00107804 Jy ! Component: 1750 - total flux cleaned = -0.000972058 Jy ! Component: 1800 - total flux cleaned = -0.000919761 Jy ! Component: 1850 - total flux cleaned = -0.000894025 Jy ! Component: 1900 - total flux cleaned = -0.000816788 Jy ! Component: 1950 - total flux cleaned = -0.000918337 Jy ! Component: 2000 - total flux cleaned = -0.00089291 Jy ! Component: 2050 - total flux cleaned = -0.00086809 Jy ! Component: 2100 - total flux cleaned = -0.000818857 Jy ! Component: 2150 - total flux cleaned = -0.000819028 Jy ! Component: 2200 - total flux cleaned = -0.000794831 Jy ! Component: 2250 - total flux cleaned = -0.000723081 Jy ! Component: 2300 - total flux cleaned = -0.000723014 Jy ! Component: 2350 - total flux cleaned = -0.000652312 Jy ! Component: 2400 - total flux cleaned = -0.000745679 Jy ! Component: 2450 - total flux cleaned = -0.000630024 Jy ! Component: 2500 - total flux cleaned = -0.000767813 Jy ! Component: 2550 - total flux cleaned = -0.000744857 Jy ! Component: 2600 - total flux cleaned = -0.000812482 Jy ! Component: 2650 - total flux cleaned = -0.000767474 Jy ! Component: 2700 - total flux cleaned = -0.000700724 Jy ! Component: 2750 - total flux cleaned = -0.000788911 Jy ! Component: 2800 - total flux cleaned = -0.000854594 Jy ! Component: 2850 - total flux cleaned = -0.000854662 Jy ! Component: 2900 - total flux cleaned = -0.00100586 Jy ! Component: 2950 - total flux cleaned = -0.000941432 Jy ! Component: 3000 - total flux cleaned = -0.00102679 Jy ! Component: 3050 - total flux cleaned = -0.00111121 Jy ! Component: 3100 - total flux cleaned = -0.00111128 Jy ! Component: 3150 - total flux cleaned = -0.00113224 Jy ! Component: 3200 - total flux cleaned = -0.00113229 Jy ! Component: 3250 - total flux cleaned = -0.00113223 Jy ! Component: 3300 - total flux cleaned = -0.00115271 Jy ! Component: 3350 - total flux cleaned = -0.00113237 Jy ! Component: 3400 - total flux cleaned = -0.0011121 Jy ! Component: 3450 - total flux cleaned = -0.00117253 Jy ! Component: 3500 - total flux cleaned = -0.00117264 Jy ! Component: 3550 - total flux cleaned = -0.0011926 Jy ! Component: 3600 - total flux cleaned = -0.00123228 Jy ! Component: 3650 - total flux cleaned = -0.0012719 Jy ! Component: 3700 - total flux cleaned = -0.00133081 Jy ! Component: 3750 - total flux cleaned = -0.00136991 Jy ! Component: 3800 - total flux cleaned = -0.00135038 Jy ! Component: 3850 - total flux cleaned = -0.00135025 Jy ! Component: 3900 - total flux cleaned = -0.00140809 Jy ! Component: 3950 - total flux cleaned = -0.00142718 Jy ! Component: 4000 - total flux cleaned = -0.00142726 Jy ! Component: 4050 - total flux cleaned = -0.0014083 Jy ! Total flux subtracted in 4096 components = -0.00148403 Jy ! Clean residual min=-0.000966 max=0.000982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.13583 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 378 components and 0.13583 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1155-3107_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.679 x 6.962 at -2.139 degrees (North through East) ! Clean map min=-0.0031356 max=0.12565 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1155-3107_S_map.fits wmodel /vlbi/uf001/uva//J1155-3107_S_map.mod ! Writing 378 model components to file: /vlbi/uf001/uva//J1155-3107_S_map.mod wobs /vlbi/uf001/uva//J1155-3107_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1155-3107_S_uvs.fits wwins /vlbi/uf001/uva//J1155-3107_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1155-3107_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.125654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.760754 0.760754 1.52151 3.04302 6.08604 12.1721 24.3441 48.6883 97.3766 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.125 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 394.345 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1155-3107_S_dfm.log closed on Mon Jan 14 01:34:43 2019