! Started logfile: /vlbi/uf001/uva//J1155-1017_S_dfm.log on Mon Jan 14 01:33:54 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1155-1017_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1155-1017_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991667 visibilities/baseline/integration-bin. ! Found source: J1155-1017 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6426 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1155-1017_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.013786Jy sigma=17.410092 ! Fit after self-cal, rms=0.886406Jy sigma=15.113664 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.229 mas, bpa=-4.062 degrees ! Estimated noise=0.669814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0930239 Jy ! Component: 100 - total flux cleaned = 0.113334 Jy ! Total flux subtracted in 100 components = 0.113334 Jy ! Clean residual min=-0.004977 max=0.006739 Jy/beam ! Clean residual mean=-0.000010 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.113334 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.113334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082346Jy sigma=1.231668 ! Fit after self-cal, rms=0.082284Jy sigma=1.230939 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=7.946 mas, bpa=-3.105 degrees ! Estimated noise=0.530699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648661 Jy ! Component: 100 - total flux cleaned = 0.00959119 Jy ! Component: 150 - total flux cleaned = 0.011431 Jy ! Component: 200 - total flux cleaned = 0.0120448 Jy ! Total flux subtracted in 200 components = 0.0120448 Jy ! Clean residual min=-0.004317 max=0.005493 Jy/beam ! Clean residual mean=-0.000016 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.125379 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.125379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081991Jy sigma=1.218654 ! Fit after self-cal, rms=0.082009Jy sigma=1.218600 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.315 x 7.946 at -3.105 degrees (North through East) ! Clean map min=-0.0042245 max=0.11831 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.00 KP 0.99 ! LA 0.89 MK 1.00 NL 1.10 OV 0.93 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.72 FD 0.95 HN 1.03 KP 0.97 ! LA 0.89 MK 0.98 NL 1.19 OV 1.02 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.91 HN 1.06 KP 0.97 ! LA 0.92 MK 1.03 NL 1.15 OV 0.99 ! PT 0.94 SC 0.98 ! ! ! Fit before self-cal, rms=0.082009Jy sigma=1.218600 ! Fit after self-cal, rms=0.092120Jy sigma=1.192249 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=8.052 mas, bpa=-2.847 degrees ! Estimated noise=0.528594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001195 Jy ! Component: 100 - total flux cleaned = -0.00144753 Jy ! Component: 150 - total flux cleaned = -0.0016023 Jy ! Component: 200 - total flux cleaned = -0.00170912 Jy ! Total flux subtracted in 200 components = -0.00170912 Jy ! Clean residual min=-0.003169 max=0.003170 Jy/beam ! Clean residual mean=-0.000003 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.123669 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.123669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092077Jy sigma=1.191546 ! Fit after self-cal, rms=0.092278Jy sigma=1.191026 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092278Jy sigma=1.191026 ! Fit after self-cal, rms=0.094651Jy sigma=1.183788 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.056 mas, bpa=-3.038 degrees ! Estimated noise=0.52844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05043e-05 Jy ! Component: 100 - total flux cleaned = -7.66002e-05 Jy ! Component: 150 - total flux cleaned = -9.78221e-05 Jy ! Component: 200 - total flux cleaned = -0.000137201 Jy ! Total flux subtracted in 200 components = -0.000137201 Jy ! Clean residual min=-0.002085 max=0.002289 Jy/beam ! Clean residual mean=-0.000004 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.123532 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.123532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094641Jy sigma=1.183587 ! Fit after self-cal, rms=0.094687Jy sigma=1.183467 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17389e-05 Jy ! Component: 100 - total flux cleaned = -5.98657e-05 Jy ! Component: 150 - total flux cleaned = -9.32564e-05 Jy ! Component: 200 - total flux cleaned = -0.000109169 Jy ! Total flux subtracted in 200 components = -0.000109169 Jy ! Clean residual min=-0.002091 max=0.002253 Jy/beam ! Clean residual mean=-0.000004 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.123423 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.123423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094681Jy sigma=1.183347 ! Fit after self-cal, rms=0.094680Jy sigma=1.183343 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094680Jy sigma=1.183343 ! Fit after self-cal, rms=0.095005Jy sigma=1.183330 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.064 mas, bpa=-3.052 degrees ! Estimated noise=0.528437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.40783e-05 Jy ! Component: 100 - total flux cleaned = -0.000115838 Jy ! Component: 150 - total flux cleaned = -0.000145271 Jy ! Component: 200 - total flux cleaned = -0.000159486 Jy ! Total flux subtracted in 200 components = -0.000159486 Jy ! Clean residual min=-0.002093 max=0.002208 Jy/beam ! Clean residual mean=-0.000004 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.123264 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.123264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095000Jy sigma=1.183237 ! Fit after self-cal, rms=0.095003Jy sigma=1.183235 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.31349e-05 Jy ! Component: 100 - total flux cleaned = -5.64553e-05 Jy ! Component: 150 - total flux cleaned = -6.90134e-05 Jy ! Component: 200 - total flux cleaned = -6.83653e-05 Jy ! Total flux subtracted in 200 components = -6.83653e-05 Jy ! Clean residual min=-0.002095 max=0.002194 Jy/beam ! Clean residual mean=-0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.123195 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.123195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094999Jy sigma=1.183175 ! Fit after self-cal, rms=0.094999Jy sigma=1.183173 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094999Jy sigma=1.183173 ! Fit after self-cal, rms=0.095168Jy sigma=1.183165 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.593 mas, bmaj=14.23 mas, bpa=-0.7604 degrees ! Estimated noise=0.665387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318843 Jy ! Component: 100 - total flux cleaned = -0.000249333 Jy ! Component: 150 - total flux cleaned = -0.000208471 Jy ! Component: 200 - total flux cleaned = -0.000197793 Jy ! Total flux subtracted in 200 components = -0.000197793 Jy ! Clean residual min=-0.002529 max=0.002382 Jy/beam ! Clean residual mean=-0.000007 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.122997 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.122997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095166Jy sigma=1.183217 ! Fit after self-cal, rms=0.095165Jy sigma=1.183185 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106776 Jy ! Component: 100 - total flux cleaned = -7.34697e-05 Jy ! Component: 150 - total flux cleaned = -3.89432e-05 Jy ! Component: 200 - total flux cleaned = -3.13245e-05 Jy ! Total flux subtracted in 200 components = -3.13245e-05 Jy ! Clean residual min=-0.002530 max=0.002388 Jy/beam ! Clean residual mean=-0.000007 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.122966 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.122966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095168Jy sigma=1.183250 ! Fit after self-cal, rms=0.095167Jy sigma=1.183240 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.069 mas, bpa=-3.063 degrees ! Estimated noise=0.528213 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 8.069 at -3.063 degrees (North through East) ! Clean map min=-0.0020585 max=0.11901 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.303 mas, bpa=-3.881 degrees ! Estimated noise=0.666497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925099 Jy ! Component: 100 - total flux cleaned = 0.112694 Jy ! Component: 150 - total flux cleaned = 0.118278 Jy ! Component: 200 - total flux cleaned = 0.120649 Jy ! Total flux subtracted in 200 components = 0.120649 Jy ! Clean residual min=-0.003278 max=0.002688 Jy/beam ! Clean residual mean=-0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.120649 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.120649 Jy ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.069 mas, bpa=-3.063 degrees ! Estimated noise=0.528213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158626 Jy ! Component: 100 - total flux cleaned = 0.00190663 Jy ! Component: 150 - total flux cleaned = 0.00196458 Jy ! Component: 200 - total flux cleaned = 0.00199138 Jy ! Total flux subtracted in 200 components = 0.00199138 Jy ! Clean residual min=-0.002150 max=0.002178 Jy/beam ! Clean residual mean=-0.000004 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.12264 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.12264 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.593 mas, bmaj=14.23 mas, bpa=-0.7604 degrees ! Estimated noise=0.665387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105593 Jy ! Component: 100 - total flux cleaned = -2.37405e-06 Jy ! Component: 150 - total flux cleaned = 7.57727e-05 Jy ! Component: 200 - total flux cleaned = 0.000136566 Jy ! Total flux subtracted in 200 components = 0.000136566 Jy ! Clean residual min=-0.002541 max=0.002377 Jy/beam ! Clean residual mean=-0.000007 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.122777 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.70327e-05 Jy ! Component: 100 - total flux cleaned = 6.59449e-05 Jy ! Component: 150 - total flux cleaned = 7.44453e-05 Jy ! Component: 200 - total flux cleaned = 8.78435e-05 Jy ! Total flux subtracted in 200 components = 8.78435e-05 Jy ! Clean residual min=-0.002536 max=0.002388 Jy/beam ! Clean residual mean=-0.000007 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.122865 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.122865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.069 mas, bpa=-3.063 degrees ! Estimated noise=0.528213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131715 Jy ! Component: 100 - total flux cleaned = 2.73001e-05 Jy ! Component: 150 - total flux cleaned = -6.21984e-05 Jy ! Component: 200 - total flux cleaned = -8.08707e-05 Jy ! Total flux subtracted in 200 components = -8.08707e-05 Jy ! Clean residual min=-0.002099 max=0.002192 Jy/beam ! Clean residual mean=-0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.122784 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.122784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095175Jy sigma=1.183276 ! Fit after self-cal, rms=0.095171Jy sigma=1.183249 wmodel J1155-1017_S_map.mod ! Writing 48 model components to file: J1155-1017_S_map.mod wobs J1155-1017_S_uvs.fits ! Writing UV FITS file: J1155-1017_S_uvs.fits wwins J1155-1017_S_map.win ! wwins: Wrote 1 windows to J1155-1017_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491057 Jy ! Component: 100 - total flux cleaned = 0.000678508 Jy ! Component: 150 - total flux cleaned = 0.000892869 Jy ! Component: 200 - total flux cleaned = 0.00106513 Jy ! Component: 250 - total flux cleaned = 0.00126561 Jy ! Component: 300 - total flux cleaned = 0.00145971 Jy ! Component: 350 - total flux cleaned = 0.00167811 Jy ! Component: 400 - total flux cleaned = 0.00179998 Jy ! Component: 450 - total flux cleaned = 0.00197843 Jy ! Component: 500 - total flux cleaned = 0.00212336 Jy ! Component: 550 - total flux cleaned = 0.00215181 Jy ! Component: 600 - total flux cleaned = 0.00215223 Jy ! Component: 650 - total flux cleaned = 0.00217952 Jy ! Component: 700 - total flux cleaned = 0.00212674 Jy ! Component: 750 - total flux cleaned = 0.00204895 Jy ! Component: 800 - total flux cleaned = 0.00204921 Jy ! Component: 850 - total flux cleaned = 0.00202405 Jy ! Component: 900 - total flux cleaned = 0.0020485 Jy ! Component: 950 - total flux cleaned = 0.00202398 Jy ! Component: 1000 - total flux cleaned = 0.0020481 Jy ! Component: 1050 - total flux cleaned = 0.00211883 Jy ! Component: 1100 - total flux cleaned = 0.00221128 Jy ! Component: 1150 - total flux cleaned = 0.00225733 Jy ! Component: 1200 - total flux cleaned = 0.00239274 Jy ! Component: 1250 - total flux cleaned = 0.00243753 Jy ! Component: 1300 - total flux cleaned = 0.00254746 Jy ! Component: 1350 - total flux cleaned = 0.00267787 Jy ! Component: 1400 - total flux cleaned = 0.00280662 Jy ! Component: 1450 - total flux cleaned = 0.00284933 Jy ! Component: 1500 - total flux cleaned = 0.00303815 Jy ! Component: 1550 - total flux cleaned = 0.00312144 Jy ! Component: 1600 - total flux cleaned = 0.00320371 Jy ! Component: 1650 - total flux cleaned = 0.00336564 Jy ! Component: 1700 - total flux cleaned = 0.00340582 Jy ! Component: 1750 - total flux cleaned = 0.00354432 Jy ! Component: 1800 - total flux cleaned = 0.00360334 Jy ! Component: 1850 - total flux cleaned = 0.00370058 Jy ! Component: 1900 - total flux cleaned = 0.00375835 Jy ! Component: 1950 - total flux cleaned = 0.00385342 Jy ! Component: 2000 - total flux cleaned = 0.0039471 Jy ! Component: 2050 - total flux cleaned = 0.00396543 Jy ! Component: 2100 - total flux cleaned = 0.00398375 Jy ! Component: 2150 - total flux cleaned = 0.00398356 Jy ! Component: 2200 - total flux cleaned = 0.00398347 Jy ! Component: 2250 - total flux cleaned = 0.00401954 Jy ! Component: 2300 - total flux cleaned = 0.00401978 Jy ! Component: 2350 - total flux cleaned = 0.00403752 Jy ! Component: 2400 - total flux cleaned = 0.00407249 Jy ! Component: 2450 - total flux cleaned = 0.00412443 Jy ! Component: 2500 - total flux cleaned = 0.0041244 Jy ! Component: 2550 - total flux cleaned = 0.00409064 Jy ! Component: 2600 - total flux cleaned = 0.00412446 Jy ! Component: 2650 - total flux cleaned = 0.00414131 Jy ! Component: 2700 - total flux cleaned = 0.00417434 Jy ! Component: 2750 - total flux cleaned = 0.00417447 Jy ! Component: 2800 - total flux cleaned = 0.00417461 Jy ! Component: 2850 - total flux cleaned = 0.00423936 Jy ! Component: 2900 - total flux cleaned = 0.00423912 Jy ! Component: 2950 - total flux cleaned = 0.00420712 Jy ! Component: 3000 - total flux cleaned = 0.00417524 Jy ! Component: 3050 - total flux cleaned = 0.00420675 Jy ! Component: 3100 - total flux cleaned = 0.00414408 Jy ! Component: 3150 - total flux cleaned = 0.00415969 Jy ! Component: 3200 - total flux cleaned = 0.00415977 Jy ! Component: 3250 - total flux cleaned = 0.00417515 Jy ! Component: 3300 - total flux cleaned = 0.00414474 Jy ! Component: 3350 - total flux cleaned = 0.00412971 Jy ! Component: 3400 - total flux cleaned = 0.00408454 Jy ! Component: 3450 - total flux cleaned = 0.00411425 Jy ! Component: 3500 - total flux cleaned = 0.00408462 Jy ! Component: 3550 - total flux cleaned = 0.00408459 Jy ! Component: 3600 - total flux cleaned = 0.00406972 Jy ! Component: 3650 - total flux cleaned = 0.00404067 Jy ! Component: 3700 - total flux cleaned = 0.00404086 Jy ! Component: 3750 - total flux cleaned = 0.00402647 Jy ! Component: 3800 - total flux cleaned = 0.00399767 Jy ! Component: 3850 - total flux cleaned = 0.00398342 Jy ! Component: 3900 - total flux cleaned = 0.00396932 Jy ! Component: 3950 - total flux cleaned = 0.00398318 Jy ! Component: 4000 - total flux cleaned = 0.00394131 Jy ! Component: 4050 - total flux cleaned = 0.00391371 Jy ! Total flux subtracted in 4096 components = 0.00395504 Jy ! Clean residual min=-0.000800 max=0.000697 Jy/beam ! Clean residual mean=-0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.126739 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 308 components and 0.126739 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1155-1017_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 8.069 at -3.063 degrees (North through East) ! Clean map min=-0.0020605 max=0.11907 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1155-1017_S_map.fits wmodel /vlbi/uf001/uva//J1155-1017_S_map.mod ! Writing 308 model components to file: /vlbi/uf001/uva//J1155-1017_S_map.mod wobs /vlbi/uf001/uva//J1155-1017_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1155-1017_S_uvs.fits wwins /vlbi/uf001/uva//J1155-1017_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1155-1017_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.119067 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239996 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.604692 0.604692 1.20938 2.41877 4.83753 9.67507 19.3501 38.7003 77.4005 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.119 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 496.12 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1155-1017_S_dfm.log closed on Mon Jan 14 01:33:59 2019