! Started logfile: /vlbi/uf001/uva//J1154-3242_S_dfm.log on Mon Jan 14 01:33:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1154-3242_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1154-3242_S_uva.fits ! AN table 1: 38 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.863722 visibilities/baseline/integration-bin. ! Found source: J1154-3242 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2757 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1154-3242_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020442Jy sigma=14.840852 ! Fit after self-cal, rms=0.888873Jy sigma=12.907242 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.261 mas, bmaj=6.02 mas, bpa=-3.348 degrees ! Estimated noise=1.56023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0813944 Jy ! Component: 100 - total flux cleaned = 0.108196 Jy ! Total flux subtracted in 100 components = 0.108196 Jy ! Clean residual min=-0.010308 max=0.012646 Jy/beam ! Clean residual mean=-0.000158 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.108196 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.108196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104127Jy sigma=1.404744 ! Fit after self-cal, rms=0.103550Jy sigma=1.396605 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=6.944 mas, bpa=-3.098 degrees ! Estimated noise=0.952111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227576 Jy ! Component: 100 - total flux cleaned = 0.0346221 Jy ! Component: 150 - total flux cleaned = 0.0417058 Jy ! Component: 200 - total flux cleaned = 0.0460324 Jy ! Total flux subtracted in 200 components = 0.0460324 Jy ! Clean residual min=-0.008922 max=0.008145 Jy/beam ! Clean residual mean=-0.000118 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 0.154229 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.154229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098762Jy sigma=1.317444 ! Fit after self-cal, rms=0.098667Jy sigma=1.315521 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.665 x 6.944 at -3.098 degrees (North through East) ! Clean map min=-0.0084334 max=0.11146 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 HN 1.21 LA 0.88 MK 1.00 ! NL 1.26 OV 1.04 PT 0.94 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.36 LA 0.86 MK 1.03 ! NL 1.05 OV 1.07 PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 1.23 LA 0.89 MK 1.01 ! NL 1.10 OV 1.02 PT 1.02 SC 0.95 ! ! ! Fit before self-cal, rms=0.098667Jy sigma=1.315521 ! Fit after self-cal, rms=0.099431Jy sigma=1.286186 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=6.948 mas, bpa=-2.571 degrees ! Estimated noise=0.948323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.48534e-05 Jy ! Component: 100 - total flux cleaned = 9.72368e-05 Jy ! Component: 150 - total flux cleaned = 2.34673e-05 Jy ! Component: 200 - total flux cleaned = -4.07698e-05 Jy ! Total flux subtracted in 200 components = -4.07698e-05 Jy ! Clean residual min=-0.005885 max=0.004609 Jy/beam ! Clean residual mean=-0.000025 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.154188 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.154188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099397Jy sigma=1.285697 ! Fit after self-cal, rms=0.099630Jy sigma=1.284501 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099630Jy sigma=1.284501 ! Fit after self-cal, rms=0.101578Jy sigma=1.278636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.97 mas, bpa=-2.15 degrees ! Estimated noise=0.950406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505357 Jy ! Component: 100 - total flux cleaned = 0.000508574 Jy ! Component: 150 - total flux cleaned = 0.000482767 Jy ! Component: 200 - total flux cleaned = 0.000482955 Jy ! Total flux subtracted in 200 components = 0.000482955 Jy ! Clean residual min=-0.005967 max=0.004184 Jy/beam ! Clean residual mean=-0.000014 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.154671 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.154671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101559Jy sigma=1.278441 ! Fit after self-cal, rms=0.101622Jy sigma=1.278302 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.7482e-05 Jy ! Component: 100 - total flux cleaned = -9.89868e-05 Jy ! Component: 150 - total flux cleaned = -0.00012053 Jy ! Component: 200 - total flux cleaned = -0.00012085 Jy ! Total flux subtracted in 200 components = -0.00012085 Jy ! Clean residual min=-0.005959 max=0.004159 Jy/beam ! Clean residual mean=-0.000015 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.15455 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.15455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101610Jy sigma=1.278177 ! Fit after self-cal, rms=0.101612Jy sigma=1.278162 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101612Jy sigma=1.278162 ! Fit after self-cal, rms=0.103088Jy sigma=1.277095 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.983 mas, bpa=-1.9 degrees ! Estimated noise=0.951783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015335 Jy ! Component: 100 - total flux cleaned = 0.000177803 Jy ! Component: 150 - total flux cleaned = 0.000178852 Jy ! Component: 200 - total flux cleaned = 0.000179457 Jy ! Total flux subtracted in 200 components = 0.000179457 Jy ! Clean residual min=-0.005987 max=0.004173 Jy/beam ! Clean residual mean=-0.000010 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.154729 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.154729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103075Jy sigma=1.276999 ! Fit after self-cal, rms=0.103118Jy sigma=1.276947 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103037 Jy ! Component: 100 - total flux cleaned = -6.488e-05 Jy ! Component: 150 - total flux cleaned = -6.48079e-05 Jy ! Component: 200 - total flux cleaned = -8.18276e-05 Jy ! Total flux subtracted in 200 components = -8.18276e-05 Jy ! Clean residual min=-0.005961 max=0.004155 Jy/beam ! Clean residual mean=-0.000011 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.154648 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.154648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103110Jy sigma=1.276879 ! Fit after self-cal, rms=0.103110Jy sigma=1.276873 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103110Jy sigma=1.276873 ! Fit after self-cal, rms=0.103595Jy sigma=1.276842 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.076 mas, bmaj=18.87 mas, bpa=1.749 degrees ! Estimated noise=1.31063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03074e-05 Jy ! Component: 100 - total flux cleaned = -0.000121655 Jy ! Component: 150 - total flux cleaned = -0.00016008 Jy ! Component: 200 - total flux cleaned = -0.000178287 Jy ! Total flux subtracted in 200 components = -0.000178287 Jy ! Clean residual min=-0.006925 max=0.005017 Jy/beam ! Clean residual mean=-0.000032 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.154469 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 0.154469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103593Jy sigma=1.276924 ! Fit after self-cal, rms=0.103596Jy sigma=1.276883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17155e-05 Jy ! Component: 100 - total flux cleaned = -7.98312e-05 Jy ! Component: 150 - total flux cleaned = -0.000113688 Jy ! Component: 200 - total flux cleaned = -0.000130076 Jy ! Total flux subtracted in 200 components = -0.000130076 Jy ! Clean residual min=-0.006937 max=0.004994 Jy/beam ! Clean residual mean=-0.000033 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.154339 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.154339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103596Jy sigma=1.276985 ! Fit after self-cal, rms=0.103595Jy sigma=1.276952 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.982 mas, bpa=-1.761 degrees ! Estimated noise=0.953795 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.699 x 6.982 at -1.761 degrees (North through East) ! Clean map min=-0.0056429 max=0.1135 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.274 mas, bmaj=5.976 mas, bpa=-1.649 degrees ! Estimated noise=1.5843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0819663 Jy ! Component: 100 - total flux cleaned = 0.110316 Jy ! Component: 150 - total flux cleaned = 0.125898 Jy ! Component: 200 - total flux cleaned = 0.135156 Jy ! Total flux subtracted in 200 components = 0.135156 Jy ! Clean residual min=-0.007305 max=0.006407 Jy/beam ! Clean residual mean=-0.000055 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.135156 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.135156 Jy ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.982 mas, bpa=-1.761 degrees ! Estimated noise=0.953795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00891711 Jy ! Component: 100 - total flux cleaned = 0.0136494 Jy ! Component: 150 - total flux cleaned = 0.0162209 Jy ! Component: 200 - total flux cleaned = 0.01764 Jy ! Total flux subtracted in 200 components = 0.01764 Jy ! Clean residual min=-0.006111 max=0.004062 Jy/beam ! Clean residual mean=-0.000021 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.152796 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.152796 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.076 mas, bmaj=18.87 mas, bpa=1.749 degrees ! Estimated noise=1.31063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111272 Jy ! Component: 100 - total flux cleaned = 0.00118786 Jy ! Component: 150 - total flux cleaned = 0.00119062 Jy ! Component: 200 - total flux cleaned = 0.0011929 Jy ! Total flux subtracted in 200 components = 0.0011929 Jy ! Clean residual min=-0.007006 max=0.004936 Jy/beam ! Clean residual mean=-0.000037 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.153989 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.97669e-06 Jy ! Component: 100 - total flux cleaned = 3.65131e-06 Jy ! Component: 150 - total flux cleaned = 3.53631e-06 Jy ! Component: 200 - total flux cleaned = -7.38945e-06 Jy ! Total flux subtracted in 200 components = -7.38945e-06 Jy ! Clean residual min=-0.006998 max=0.004946 Jy/beam ! Clean residual mean=-0.000037 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.153982 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.153982 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.982 mas, bpa=-1.761 degrees ! Estimated noise=0.953795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.36637e-05 Jy ! Component: 100 - total flux cleaned = 7.51192e-07 Jy ! Component: 150 - total flux cleaned = 1.37656e-06 Jy ! Component: 200 - total flux cleaned = 2.01381e-05 Jy ! Total flux subtracted in 200 components = 2.01381e-05 Jy ! Clean residual min=-0.005959 max=0.004165 Jy/beam ! Clean residual mean=-0.000015 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.154002 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.154002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103566Jy sigma=1.276898 ! Fit after self-cal, rms=0.103552Jy sigma=1.276856 wmodel J1154-3242_S_map.mod ! Writing 57 model components to file: J1154-3242_S_map.mod wobs J1154-3242_S_uvs.fits ! Writing UV FITS file: J1154-3242_S_uvs.fits wwins J1154-3242_S_map.win ! wwins: Wrote 1 windows to J1154-3242_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250534 Jy ! Component: 100 - total flux cleaned = -0.00429793 Jy ! Component: 150 - total flux cleaned = -0.00467214 Jy ! Component: 200 - total flux cleaned = -0.00426483 Jy ! Component: 250 - total flux cleaned = -0.00368516 Jy ! Component: 300 - total flux cleaned = -0.00313351 Jy ! Component: 350 - total flux cleaned = -0.00295532 Jy ! Component: 400 - total flux cleaned = -0.00261533 Jy ! Component: 450 - total flux cleaned = -0.00245115 Jy ! Component: 500 - total flux cleaned = -0.00234508 Jy ! Component: 550 - total flux cleaned = -0.00213994 Jy ! Component: 600 - total flux cleaned = -0.00198983 Jy ! Component: 650 - total flux cleaned = -0.00179568 Jy ! Component: 700 - total flux cleaned = -0.00160659 Jy ! Component: 750 - total flux cleaned = -0.00137601 Jy ! Component: 800 - total flux cleaned = -0.00119631 Jy ! Component: 850 - total flux cleaned = -0.000975732 Jy ! Component: 900 - total flux cleaned = -0.000889285 Jy ! Component: 950 - total flux cleaned = -0.000719993 Jy ! Component: 1000 - total flux cleaned = -0.000554283 Jy ! Component: 1050 - total flux cleaned = -0.000472733 Jy ! Component: 1100 - total flux cleaned = -0.000352476 Jy ! Component: 1150 - total flux cleaned = -0.000158297 Jy ! Component: 1200 - total flux cleaned = -4.40683e-05 Jy ! Component: 1250 - total flux cleaned = 3.07755e-05 Jy ! Component: 1300 - total flux cleaned = 0.000178237 Jy ! Component: 1350 - total flux cleaned = 0.000358508 Jy ! Component: 1400 - total flux cleaned = 0.000393938 Jy ! Component: 1450 - total flux cleaned = 0.000568697 Jy ! Component: 1500 - total flux cleaned = 0.000774514 Jy ! Component: 1550 - total flux cleaned = 0.000976551 Jy ! Component: 1600 - total flux cleaned = 0.00117504 Jy ! Component: 1650 - total flux cleaned = 0.00124034 Jy ! Component: 1700 - total flux cleaned = 0.0014009 Jy ! Component: 1750 - total flux cleaned = 0.00159134 Jy ! Component: 1800 - total flux cleaned = 0.00184105 Jy ! Component: 1850 - total flux cleaned = 0.00193329 Jy ! Component: 1900 - total flux cleaned = 0.00214591 Jy ! Component: 1950 - total flux cleaned = 0.00235497 Jy ! Component: 2000 - total flux cleaned = 0.00244359 Jy ! Component: 2050 - total flux cleaned = 0.00273497 Jy ! Component: 2100 - total flux cleaned = 0.00285022 Jy ! Component: 2150 - total flux cleaned = 0.00296434 Jy ! Component: 2200 - total flux cleaned = 0.00313265 Jy ! Component: 2250 - total flux cleaned = 0.0032161 Jy ! Component: 2300 - total flux cleaned = 0.0033808 Jy ! Component: 2350 - total flux cleaned = 0.00346233 Jy ! Component: 2400 - total flux cleaned = 0.00356976 Jy ! Component: 2450 - total flux cleaned = 0.00370215 Jy ! Component: 2500 - total flux cleaned = 0.0037548 Jy ! Component: 2550 - total flux cleaned = 0.00380683 Jy ! Component: 2600 - total flux cleaned = 0.00398677 Jy ! Component: 2650 - total flux cleaned = 0.00398631 Jy ! Component: 2700 - total flux cleaned = 0.00406174 Jy ! Component: 2750 - total flux cleaned = 0.00413631 Jy ! Component: 2800 - total flux cleaned = 0.00416087 Jy ! Component: 2850 - total flux cleaned = 0.00420971 Jy ! Component: 2900 - total flux cleaned = 0.00420962 Jy ! Component: 2950 - total flux cleaned = 0.00420947 Jy ! Component: 3000 - total flux cleaned = 0.0042808 Jy ! Component: 3050 - total flux cleaned = 0.00421009 Jy ! Component: 3100 - total flux cleaned = 0.00423359 Jy ! Component: 3150 - total flux cleaned = 0.00418728 Jy ! Component: 3200 - total flux cleaned = 0.00416428 Jy ! Component: 3250 - total flux cleaned = 0.00416434 Jy ! Component: 3300 - total flux cleaned = 0.00409661 Jy ! Component: 3350 - total flux cleaned = 0.00409687 Jy ! Component: 3400 - total flux cleaned = 0.00403023 Jy ! Component: 3450 - total flux cleaned = 0.00398606 Jy ! Component: 3500 - total flux cleaned = 0.00394197 Jy ! Component: 3550 - total flux cleaned = 0.0038985 Jy ! Component: 3600 - total flux cleaned = 0.00389868 Jy ! Component: 3650 - total flux cleaned = 0.00387713 Jy ! Component: 3700 - total flux cleaned = 0.00374868 Jy ! Component: 3750 - total flux cleaned = 0.00374887 Jy ! Component: 3800 - total flux cleaned = 0.00372762 Jy ! Component: 3850 - total flux cleaned = 0.00366448 Jy ! Component: 3900 - total flux cleaned = 0.00368543 Jy ! Component: 3950 - total flux cleaned = 0.00360196 Jy ! Component: 4000 - total flux cleaned = 0.00356055 Jy ! Component: 4050 - total flux cleaned = 0.00356062 Jy ! Total flux subtracted in 4096 components = 0.00349898 Jy ! Clean residual min=-0.001230 max=0.001165 Jy/beam ! Clean residual mean=-0.000014 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.157501 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 324 components and 0.157501 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1154-3242_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.699 x 6.982 at -1.761 degrees (North through East) ! Clean map min=-0.0027096 max=0.11389 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1154-3242_S_map.fits wmodel /vlbi/uf001/uva//J1154-3242_S_map.mod ! Writing 324 model components to file: /vlbi/uf001/uva//J1154-3242_S_map.mod wobs /vlbi/uf001/uva//J1154-3242_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1154-3242_S_uvs.fits wwins /vlbi/uf001/uva//J1154-3242_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1154-3242_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.113894 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320456 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.844093 0.844093 1.68819 3.37637 6.75275 13.5055 27.011 54.022 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.113 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 355.411 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1154-3242_S_dfm.log closed on Mon Jan 14 01:33:23 2019