! Started logfile: /vlbi/uf001/uva//J1153+8058_X_dfm.log on Mon Jan 14 01:32:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1153+8058_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1153+8058_X_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975463 visibilities/baseline/integration-bin. ! Found source: J1153+8058 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 50568 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1153+8058_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.086843Jy sigma=21.281424 ! Fit after self-cal, rms=0.665830Jy sigma=13.594687 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7707 mas, bmaj=0.8175 mas, bpa=-56.91 degrees ! Estimated noise=0.339637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238241 Jy ! Component: 100 - total flux cleaned = 0.304466 Jy ! Total flux subtracted in 100 components = 0.304466 Jy ! Clean residual min=-0.018224 max=0.045487 Jy/beam ! Clean residual mean=0.000009 rms=0.004294 Jy/beam ! Combined flux in latest and established models = 0.304466 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.304466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.212349Jy sigma=3.658330 ! Fit after self-cal, rms=0.212259Jy sigma=3.655552 ! Inverting map ! Added new window around map position (-0.6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479676 Jy ! Component: 100 - total flux cleaned = 0.0787936 Jy ! Total flux subtracted in 100 components = 0.0787936 Jy ! Clean residual min=-0.015329 max=0.040367 Jy/beam ! Clean residual mean=0.000010 rms=0.003694 Jy/beam ! Combined flux in latest and established models = 0.38326 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.38326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.183760Jy sigma=3.174872 ! Fit after self-cal, rms=0.182898Jy sigma=3.147452 ! Inverting map ! Added new window around map position (0.4, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425994 Jy ! Component: 100 - total flux cleaned = 0.0712222 Jy ! Total flux subtracted in 100 components = 0.0712222 Jy ! Clean residual min=-0.013394 max=0.026407 Jy/beam ! Clean residual mean=0.000008 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 0.454482 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.454482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155716Jy sigma=2.661197 ! Fit after self-cal, rms=0.155031Jy sigma=2.647043 ! Inverting map ! Added new window around map position (1.8, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290027 Jy ! Component: 100 - total flux cleaned = 0.0515977 Jy ! Total flux subtracted in 100 components = 0.0515977 Jy ! Clean residual min=-0.012381 max=0.014167 Jy/beam ! Clean residual mean=0.000007 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.50608 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 50 components and 0.50608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138558Jy sigma=2.358625 ! Fit after self-cal, rms=0.138351Jy sigma=2.352899 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205542 Jy ! Component: 100 - total flux cleaned = 0.0382141 Jy ! Total flux subtracted in 100 components = 0.0382141 Jy ! Clean residual min=-0.011890 max=0.012610 Jy/beam ! Clean residual mean=0.000006 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.544294 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.544294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127448Jy sigma=2.172602 ! Fit after self-cal, rms=0.127364Jy sigma=2.170120 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.03 mas, bmaj=1.086 mas, bpa=-68.62 degrees ! Estimated noise=0.161694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391193 Jy ! Component: 100 - total flux cleaned = 0.0687633 Jy ! Component: 150 - total flux cleaned = 0.0919218 Jy ! Component: 200 - total flux cleaned = 0.110111 Jy ! Total flux subtracted in 200 components = 0.110111 Jy ! Clean residual min=-0.012947 max=0.018162 Jy/beam ! Clean residual mean=0.000053 rms=0.003422 Jy/beam ! Combined flux in latest and established models = 0.654405 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 92 components and 0.654405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104073Jy sigma=1.825818 ! Fit after self-cal, rms=0.103474Jy sigma=1.810687 ! Inverting map ! Added new window around map position (0.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201546 Jy ! Component: 100 - total flux cleaned = 0.0344683 Jy ! Component: 150 - total flux cleaned = 0.0457687 Jy ! Component: 200 - total flux cleaned = 0.0549679 Jy ! Total flux subtracted in 200 components = 0.0549679 Jy ! Clean residual min=-0.011773 max=0.014809 Jy/beam ! Clean residual mean=0.000047 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 0.709373 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 120 components and 0.709373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096458Jy sigma=1.713162 ! Fit after self-cal, rms=0.095981Jy sigma=1.704591 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.03 x 1.086 at -68.62 degrees (North through East) ! Clean map min=-0.01145 max=0.33073 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.97 HN 0.98 KP 1.00 ! LA 1.04 MK 1.04 NL 1.10 OV 0.92 ! PT 0.87 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.97 HN 0.97 KP 1.00 ! LA 1.05 MK 1.04 NL 1.10 OV 0.92 ! PT 0.88 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.96 HN 0.98 KP 1.01 ! LA 1.04 MK 1.04 NL 1.10 OV 0.91 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.97 HN 0.97 KP 1.00 ! LA 1.03 MK 1.02 NL 1.09 OV 0.92 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.97 HN 0.97 KP 1.02 ! LA 1.04 MK 1.01 NL 1.10 OV 0.92 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.97 HN 0.96 KP 1.01 ! LA 1.04 MK 1.01 NL 1.10 OV 0.92 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.97 HN 0.96 KP 1.01 ! LA 1.04 MK 1.02 NL 1.09 OV 0.92 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.95 HN 0.98 KP 1.00 ! LA 1.04 MK 1.03 NL 1.09 OV 0.91 ! PT 0.87 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.96 HN 0.97 KP 1.01 ! LA 1.02 MK 1.02 NL 1.08 OV 0.92 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.95 HN 0.96 KP 0.99 ! LA 1.04 MK 1.03 NL 1.06 OV 0.91 ! PT 0.86 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.97 HN 0.96 KP 1.01 ! LA 1.03 MK 1.01 NL 1.08 OV 0.91 ! PT 0.87 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.96 HN 0.97 KP 1.02 ! LA 1.03 MK 1.01 NL 1.08 OV 0.92 ! PT 0.88 SC 0.96 ! ! ! Fit before self-cal, rms=0.095981Jy sigma=1.704591 ! Fit after self-cal, rms=0.081399Jy sigma=1.434100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.027 mas, bmaj=1.082 mas, bpa=-68.15 degrees ! Estimated noise=0.162598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123968 Jy ! Component: 100 - total flux cleaned = 0.00170072 Jy ! Component: 150 - total flux cleaned = 0.00208726 Jy ! Component: 200 - total flux cleaned = 0.00209362 Jy ! Total flux subtracted in 200 components = 0.00209362 Jy ! Clean residual min=-0.008806 max=0.007697 Jy/beam ! Clean residual mean=0.000023 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.711466 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 135 components and 0.711466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080874Jy sigma=1.424085 ! Fit after self-cal, rms=0.080878Jy sigma=1.423427 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080878Jy sigma=1.423427 ! Fit after self-cal, rms=0.064191Jy sigma=1.146396 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.025 mas, bmaj=1.076 mas, bpa=-68.97 degrees ! Estimated noise=0.162751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00367768 Jy ! Component: 100 - total flux cleaned = -0.0038539 Jy ! Component: 150 - total flux cleaned = -0.00385753 Jy ! Component: 200 - total flux cleaned = -0.00375574 Jy ! Total flux subtracted in 200 components = -0.00375574 Jy ! Clean residual min=-0.002360 max=0.003386 Jy/beam ! Clean residual mean=-0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.707711 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.70771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063616Jy sigma=1.135496 ! Fit after self-cal, rms=0.063615Jy sigma=1.134630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159367 Jy ! Component: 100 - total flux cleaned = 0.00122803 Jy ! Component: 150 - total flux cleaned = 0.00114738 Jy ! Component: 200 - total flux cleaned = 0.00114719 Jy ! Total flux subtracted in 200 components = 0.00114719 Jy ! Clean residual min=-0.002098 max=0.002205 Jy/beam ! Clean residual mean=0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.708858 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.708858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063359Jy sigma=1.129539 ! Fit after self-cal, rms=0.063341Jy sigma=1.129278 ! Inverting map ! Added new window around map position (5.8, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023426 Jy ! Component: 100 - total flux cleaned = 0.00263083 Jy ! Component: 150 - total flux cleaned = 0.00282573 Jy ! Component: 200 - total flux cleaned = 0.00294692 Jy ! Total flux subtracted in 200 components = 0.00294692 Jy ! Clean residual min=-0.001929 max=0.002032 Jy/beam ! Clean residual mean=0.000001 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.711805 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 0.711805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063189Jy sigma=1.126186 ! Fit after self-cal, rms=0.063182Jy sigma=1.126107 ! Inverting map ! Added new window around map position (-0.2, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00094693 Jy ! Component: 100 - total flux cleaned = 0.00148734 Jy ! Component: 150 - total flux cleaned = 0.00170671 Jy ! Component: 200 - total flux cleaned = 0.00186312 Jy ! Total flux subtracted in 200 components = 0.00186312 Jy ! Clean residual min=-0.001893 max=0.001790 Jy/beam ! Clean residual mean=0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.713668 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 175 components and 0.713668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063076Jy sigma=1.123879 ! Fit after self-cal, rms=0.063071Jy sigma=1.123815 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063071Jy sigma=1.123815 ! Fit after self-cal, rms=0.062941Jy sigma=1.121687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=1.075 mas, bpa=-67.69 degrees ! Estimated noise=0.162609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012209 Jy ! Component: 100 - total flux cleaned = -0.00109198 Jy ! Component: 150 - total flux cleaned = -0.000737878 Jy ! Component: 200 - total flux cleaned = -0.000579327 Jy ! Total flux subtracted in 200 components = -0.000579327 Jy ! Clean residual min=-0.001514 max=0.001518 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.713088 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 185 components and 0.713088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062813Jy sigma=1.119131 ! Fit after self-cal, rms=0.062808Jy sigma=1.119022 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347081 Jy ! Component: 100 - total flux cleaned = 0.000291436 Jy ! Component: 150 - total flux cleaned = 0.000387419 Jy ! Component: 200 - total flux cleaned = 0.000387955 Jy ! Total flux subtracted in 200 components = 0.000387955 Jy ! Clean residual min=-0.001405 max=0.001360 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.713476 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 193 components and 0.713476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062733Jy sigma=1.117482 ! Fit after self-cal, rms=0.062729Jy sigma=1.117400 ! Inverting map ! Added new window around map position (3.4, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664776 Jy ! Component: 100 - total flux cleaned = 0.000709707 Jy ! Component: 150 - total flux cleaned = 0.000748309 Jy ! Component: 200 - total flux cleaned = 0.000785909 Jy ! Total flux subtracted in 200 components = 0.000785909 Jy ! Clean residual min=-0.001345 max=0.001325 Jy/beam ! Clean residual mean=-0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.714262 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 209 components and 0.714262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062673Jy sigma=1.116305 ! Fit after self-cal, rms=0.062671Jy sigma=1.116247 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062671Jy sigma=1.116247 ! Fit after self-cal, rms=0.062609Jy sigma=1.115563 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=2.523 mas, bpa=-70.84 degrees ! Estimated noise=0.223751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101025 Jy ! Component: 100 - total flux cleaned = 0.00106093 Jy ! Component: 150 - total flux cleaned = 0.000984424 Jy ! Component: 200 - total flux cleaned = 0.00104392 Jy ! Total flux subtracted in 200 components = 0.00104392 Jy ! Clean residual min=-0.001321 max=0.001524 Jy/beam ! Clean residual mean=-0.000005 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.715306 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 234 components and 0.715306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062578Jy sigma=1.115074 ! Fit after self-cal, rms=0.062575Jy sigma=1.115008 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431889 Jy ! Component: 100 - total flux cleaned = 0.000571058 Jy ! Component: 150 - total flux cleaned = 0.000720421 Jy ! Component: 200 - total flux cleaned = 0.000789016 Jy ! Total flux subtracted in 200 components = 0.000789016 Jy ! Clean residual min=-0.001286 max=0.001459 Jy/beam ! Clean residual mean=-0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.716095 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 246 components and 0.716095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062563Jy sigma=1.114781 ! Fit after self-cal, rms=0.062563Jy sigma=1.114764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.074 mas, bpa=-66.96 degrees ! Estimated noise=0.162581 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.022 x 1.074 at -66.96 degrees (North through East) ! Clean map min=-0.001854 max=0.32694 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7639 mas, bmaj=0.8085 mas, bpa=-59.52 degrees ! Estimated noise=0.338481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237175 Jy ! Component: 100 - total flux cleaned = 0.313387 Jy ! Component: 150 - total flux cleaned = 0.366775 Jy ! Component: 200 - total flux cleaned = 0.407894 Jy ! Total flux subtracted in 200 components = 0.407894 Jy ! Clean residual min=-0.009708 max=0.024557 Jy/beam ! Clean residual mean=0.000006 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.407894 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.407894 Jy ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.074 mas, bpa=-66.96 degrees ! Estimated noise=0.162581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0699616 Jy ! Component: 100 - total flux cleaned = 0.120107 Jy ! Component: 150 - total flux cleaned = 0.157982 Jy ! Component: 200 - total flux cleaned = 0.187133 Jy ! Total flux subtracted in 200 components = 0.187133 Jy ! Clean residual min=-0.005446 max=0.017075 Jy/beam ! Clean residual mean=0.000017 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.595027 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 89 components and 0.595027 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226784 Jy ! Component: 100 - total flux cleaned = 0.0404228 Jy ! Component: 150 - total flux cleaned = 0.0543761 Jy ! Component: 200 - total flux cleaned = 0.0653874 Jy ! Total flux subtracted in 200 components = 0.0653874 Jy ! Clean residual min=-0.002526 max=0.006503 Jy/beam ! Clean residual mean=0.000005 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.660414 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 129 components and 0.660414 Jy ! Inverting map ! Added new window around map position (-0.4, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00873644 Jy ! Component: 100 - total flux cleaned = 0.015744 Jy ! Component: 150 - total flux cleaned = 0.0214451 Jy ! Component: 200 - total flux cleaned = 0.0261164 Jy ! Total flux subtracted in 200 components = 0.0261164 Jy ! Clean residual min=-0.001643 max=0.002874 Jy/beam ! Clean residual mean=0.000001 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.68653 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 176 components and 0.68653 Jy ! Inverting map ! Added new window around map position (-1.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385063 Jy ! Component: 100 - total flux cleaned = 0.00707691 Jy ! Component: 150 - total flux cleaned = 0.00984429 Jy ! Component: 200 - total flux cleaned = 0.0122334 Jy ! Total flux subtracted in 200 components = 0.0122334 Jy ! Clean residual min=-0.001316 max=0.001561 Jy/beam ! Clean residual mean=-0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.698764 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 209 components and 0.698763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=2.523 mas, bpa=-70.84 degrees ! Estimated noise=0.223751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409362 Jy ! Component: 100 - total flux cleaned = 0.00703932 Jy ! Component: 150 - total flux cleaned = 0.00927211 Jy ! Component: 200 - total flux cleaned = 0.0110273 Jy ! Total flux subtracted in 200 components = 0.0110273 Jy ! Clean residual min=-0.001422 max=0.001750 Jy/beam ! Clean residual mean=-0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.709791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143633 Jy ! Component: 100 - total flux cleaned = 0.00262852 Jy ! Component: 150 - total flux cleaned = 0.00345165 Jy ! Component: 200 - total flux cleaned = 0.00400071 Jy ! Total flux subtracted in 200 components = 0.00400071 Jy ! Clean residual min=-0.001379 max=0.001526 Jy/beam ! Clean residual mean=-0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.713792 Jy ! Adding 129 model components to the UV plane model. ! The established model now contains 301 components and 0.713791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=1.074 mas, bpa=-66.96 degrees ! Estimated noise=0.162581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913155 Jy ! Component: 100 - total flux cleaned = 0.00143761 Jy ! Component: 150 - total flux cleaned = 0.00184234 Jy ! Component: 200 - total flux cleaned = 0.00203044 Jy ! Total flux subtracted in 200 components = 0.00203044 Jy ! Clean residual min=-0.001097 max=0.001146 Jy/beam ! Clean residual mean=-0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.715822 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 325 components and 0.715822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062442Jy sigma=1.112616 ! Fit after self-cal, rms=0.062415Jy sigma=1.111967 wmodel J1153+8058_X_map.mod ! Writing 325 model components to file: J1153+8058_X_map.mod wobs J1153+8058_X_uvs.fits ! Writing UV FITS file: J1153+8058_X_uvs.fits wwins J1153+8058_X_map.win ! wwins: Wrote 12 windows to J1153+8058_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320544 Jy ! Component: 100 - total flux cleaned = 0.000620986 Jy ! Component: 150 - total flux cleaned = 0.000909134 Jy ! Component: 200 - total flux cleaned = 0.000961479 Jy ! Component: 250 - total flux cleaned = 0.00101288 Jy ! Component: 300 - total flux cleaned = 0.00106301 Jy ! Component: 350 - total flux cleaned = 0.00112836 Jy ! Component: 400 - total flux cleaned = 0.00109617 Jy ! Component: 450 - total flux cleaned = 0.00114395 Jy ! Component: 500 - total flux cleaned = 0.0011752 Jy ! Component: 550 - total flux cleaned = 0.00120591 Jy ! Component: 600 - total flux cleaned = 0.00125106 Jy ! Component: 650 - total flux cleaned = 0.00129537 Jy ! Component: 700 - total flux cleaned = 0.00129507 Jy ! Component: 750 - total flux cleaned = 0.00125178 Jy ! Component: 800 - total flux cleaned = 0.00128077 Jy ! Component: 850 - total flux cleaned = 0.00129532 Jy ! Component: 900 - total flux cleaned = 0.00136524 Jy ! Component: 950 - total flux cleaned = 0.00136514 Jy ! Component: 1000 - total flux cleaned = 0.00139246 Jy ! Component: 1050 - total flux cleaned = 0.00144659 Jy ! Component: 1100 - total flux cleaned = 0.00139311 Jy ! Component: 1150 - total flux cleaned = 0.00145946 Jy ! Component: 1200 - total flux cleaned = 0.00145961 Jy ! Component: 1250 - total flux cleaned = 0.00147244 Jy ! Component: 1300 - total flux cleaned = 0.00145961 Jy ! Component: 1350 - total flux cleaned = 0.00148516 Jy ! Component: 1400 - total flux cleaned = 0.00151055 Jy ! Component: 1450 - total flux cleaned = 0.00146033 Jy ! Component: 1500 - total flux cleaned = 0.00154728 Jy ! Component: 1550 - total flux cleaned = 0.00153499 Jy ! Component: 1600 - total flux cleaned = 0.00151053 Jy ! Component: 1650 - total flux cleaned = 0.00148614 Jy ! Component: 1700 - total flux cleaned = 0.00157073 Jy ! Component: 1750 - total flux cleaned = 0.00153494 Jy ! Component: 1800 - total flux cleaned = 0.00158262 Jy ! Component: 1850 - total flux cleaned = 0.00165344 Jy ! Component: 1900 - total flux cleaned = 0.00162969 Jy ! Component: 1950 - total flux cleaned = 0.0016762 Jy ! Component: 2000 - total flux cleaned = 0.00166453 Jy ! Component: 2050 - total flux cleaned = 0.00160703 Jy ! Component: 2100 - total flux cleaned = 0.00161846 Jy ! Component: 2150 - total flux cleaned = 0.00161848 Jy ! Component: 2200 - total flux cleaned = 0.00165232 Jy ! Component: 2250 - total flux cleaned = 0.00170842 Jy ! Component: 2300 - total flux cleaned = 0.00165263 Jy ! Component: 2350 - total flux cleaned = 0.00169708 Jy ! Component: 2400 - total flux cleaned = 0.00170804 Jy ! Component: 2450 - total flux cleaned = 0.00167517 Jy ! Component: 2500 - total flux cleaned = 0.00170779 Jy ! Component: 2550 - total flux cleaned = 0.00170795 Jy ! Component: 2600 - total flux cleaned = 0.00168641 Jy ! Component: 2650 - total flux cleaned = 0.00171847 Jy ! Component: 2700 - total flux cleaned = 0.00170795 Jy ! Component: 2750 - total flux cleaned = 0.00169733 Jy ! Component: 2800 - total flux cleaned = 0.00174999 Jy ! Component: 2850 - total flux cleaned = 0.00172908 Jy ! Component: 2900 - total flux cleaned = 0.00174993 Jy ! Component: 2950 - total flux cleaned = 0.00173961 Jy ! Component: 3000 - total flux cleaned = 0.0017705 Jy ! Component: 3050 - total flux cleaned = 0.00178074 Jy ! Component: 3100 - total flux cleaned = 0.00172973 Jy ! Component: 3150 - total flux cleaned = 0.00169924 Jy ! Component: 3200 - total flux cleaned = 0.00172956 Jy ! Component: 3250 - total flux cleaned = 0.00178984 Jy ! Component: 3300 - total flux cleaned = 0.00179987 Jy ! Component: 3350 - total flux cleaned = 0.00178007 Jy ! Component: 3400 - total flux cleaned = 0.00182952 Jy ! Component: 3450 - total flux cleaned = 0.00178031 Jy ! Component: 3500 - total flux cleaned = 0.0018685 Jy ! Component: 3550 - total flux cleaned = 0.00187821 Jy ! Component: 3600 - total flux cleaned = 0.00191703 Jy ! Component: 3650 - total flux cleaned = 0.00187836 Jy ! Component: 3700 - total flux cleaned = 0.00188807 Jy ! Component: 3750 - total flux cleaned = 0.00188808 Jy ! Component: 3800 - total flux cleaned = 0.00189761 Jy ! Component: 3850 - total flux cleaned = 0.00192604 Jy ! Component: 3900 - total flux cleaned = 0.00191657 Jy ! Component: 3950 - total flux cleaned = 0.00193544 Jy ! Component: 4000 - total flux cleaned = 0.00194486 Jy ! Component: 4050 - total flux cleaned = 0.00192627 Jy ! Total flux subtracted in 4096 components = 0.00193565 Jy ! Clean residual min=-0.000546 max=0.000540 Jy/beam ! Clean residual mean=-0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.717757 Jy keep ! Adding 375 model components to the UV plane model. ! The established model now contains 699 components and 0.717757 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1153+8058_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.022 x 1.074 at -66.96 degrees (North through East) ! Clean map min=-0.00075571 max=0.32745 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1153+8058_X_map.fits wmodel /vlbi/uf001/uva//J1153+8058_X_map.mod ! Writing 699 model components to file: /vlbi/uf001/uva//J1153+8058_X_map.mod wobs /vlbi/uf001/uva//J1153+8058_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1153+8058_X_uvs.fits wwins /vlbi/uf001/uva//J1153+8058_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J1153+8058_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.327448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162877 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.149224 0.149224 0.298447 0.596895 1.19379 2.38758 4.77516 9.55031 19.1006 38.2013 76.4025 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.327 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2010.4 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1153+8058_X_dfm.log closed on Mon Jan 14 01:32:45 2019