! Started logfile: /vlbi/uf001/uva//J1148+1840_X_dfm.log on Mon Jan 14 01:28:44 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1148+1840_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1148+1840_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978704 visibilities/baseline/integration-bin. ! Found source: J1148+1840 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38052 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1148+1840_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011701Jy sigma=23.258133 ! Fit after self-cal, rms=0.819960Jy sigma=18.951880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6834 mas, bmaj=1.561 mas, bpa=-1.008 degrees ! Estimated noise=0.309965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126008 Jy ! Component: 100 - total flux cleaned = 0.169747 Jy ! Total flux subtracted in 100 components = 0.169747 Jy ! Clean residual min=-0.018069 max=0.080641 Jy/beam ! Clean residual mean=0.000006 rms=0.004444 Jy/beam ! Combined flux in latest and established models = 0.169747 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.169747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135684Jy sigma=3.081103 ! Fit after self-cal, rms=0.135509Jy sigma=3.077252 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665463 Jy ! Component: 100 - total flux cleaned = 0.0924584 Jy ! Total flux subtracted in 100 components = 0.0924584 Jy ! Clean residual min=-0.015591 max=0.035134 Jy/beam ! Clean residual mean=0.000001 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 0.262205 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 16 components and 0.262205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092895Jy sigma=2.113791 ! Fit after self-cal, rms=0.082893Jy sigma=1.877067 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277674 Jy ! Component: 100 - total flux cleaned = 0.0428855 Jy ! Total flux subtracted in 100 components = 0.0428855 Jy ! Clean residual min=-0.007261 max=0.018820 Jy/beam ! Clean residual mean=0.000000 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.305091 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.305091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068787Jy sigma=1.553140 ! Fit after self-cal, rms=0.067705Jy sigma=1.527608 ! Inverting map ! Added new window around map position (-1.6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160566 Jy ! Component: 100 - total flux cleaned = 0.0263892 Jy ! Total flux subtracted in 100 components = 0.0263892 Jy ! Clean residual min=-0.006262 max=0.007095 Jy/beam ! Clean residual mean=-0.000001 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.33148 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.33148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061575Jy sigma=1.383230 ! Fit after self-cal, rms=0.061448Jy sigma=1.380676 ! Inverting map ! Added new window around map position (-0.6, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898142 Jy ! Component: 100 - total flux cleaned = 0.0163188 Jy ! Total flux subtracted in 100 components = 0.0163188 Jy ! Clean residual min=-0.005956 max=0.006115 Jy/beam ! Clean residual mean=-0.000002 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.347799 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.347799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058902Jy sigma=1.319742 ! Fit after self-cal, rms=0.058855Jy sigma=1.318723 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8875 mas, bmaj=1.875 mas, bpa=-1.219 degrees ! Estimated noise=0.158986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108604 Jy ! Component: 100 - total flux cleaned = 0.0185918 Jy ! Component: 150 - total flux cleaned = 0.0244859 Jy ! Component: 200 - total flux cleaned = 0.0291172 Jy ! Total flux subtracted in 200 components = 0.0291172 Jy ! Clean residual min=-0.005492 max=0.005502 Jy/beam ! Clean residual mean=-0.000007 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.376916 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 71 components and 0.376916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056232Jy sigma=1.252785 ! Fit after self-cal, rms=0.056146Jy sigma=1.250888 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8875 x 1.875 at -1.219 degrees (North through East) ! Clean map min=-0.0050642 max=0.16235 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.93 KP 1.05 ! LA 0.95 MK 1.04 NL 1.12 OV 0.91 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.97 KP 1.05 ! LA 0.95 MK 1.06 NL 1.11 OV 0.90 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.96 KP 1.07 ! LA 0.94 MK 1.05 NL 1.11 OV 0.90 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.97 KP 1.07 ! LA 0.95 MK 1.06 NL 1.10 OV 0.89 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.94 KP 1.05 ! LA 0.95 MK 1.04 NL 1.10 OV 0.91 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.94 KP 1.05 ! LA 0.95 MK 1.03 NL 1.10 OV 0.91 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.97 KP 1.06 ! LA 0.95 MK 1.05 NL 1.10 OV 0.91 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.97 KP 1.07 ! LA 0.94 MK 1.05 NL 1.12 OV 0.91 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.94 KP 1.06 ! LA 0.95 MK 1.05 NL 1.12 OV 0.90 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.95 KP 1.06 ! LA 0.95 MK 1.05 NL 1.14 OV 0.91 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.94 KP 1.06 ! LA 0.96 MK 1.05 NL 1.12 OV 0.90 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.97 KP 1.02 ! LA 0.94 MK 1.04 NL 1.10 OV 0.91 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.056146Jy sigma=1.250888 ! Fit after self-cal, rms=0.053473Jy sigma=1.175394 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8903 mas, bmaj=1.892 mas, bpa=-0.7455 degrees ! Estimated noise=0.160092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186604 Jy ! Component: 100 - total flux cleaned = -0.000271707 Jy ! Component: 150 - total flux cleaned = -0.000414033 Jy ! Component: 200 - total flux cleaned = -0.000411808 Jy ! Total flux subtracted in 200 components = -0.000411808 Jy ! Clean residual min=-0.001771 max=0.002285 Jy/beam ! Clean residual mean=-0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.376504 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.376504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053244Jy sigma=1.170204 ! Fit after self-cal, rms=0.053282Jy sigma=1.169900 ! Inverting map ! Added new window around map position (-4.4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229448 Jy ! Component: 100 - total flux cleaned = 0.00332256 Jy ! Component: 150 - total flux cleaned = 0.00429736 Jy ! Component: 200 - total flux cleaned = 0.00482719 Jy ! Total flux subtracted in 200 components = 0.00482719 Jy ! Clean residual min=-0.001564 max=0.001809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.381332 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.381332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053137Jy sigma=1.166697 ! Fit after self-cal, rms=0.053130Jy sigma=1.166595 ! Inverting map ! Added new window around map position (0.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899622 Jy ! Component: 100 - total flux cleaned = 0.00128775 Jy ! Component: 150 - total flux cleaned = 0.00159905 Jy ! Component: 200 - total flux cleaned = 0.00196857 Jy ! Total flux subtracted in 200 components = 0.00196857 Jy ! Clean residual min=-0.001430 max=0.001501 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.3833 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 0.3833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053043Jy sigma=1.164788 ! Fit after self-cal, rms=0.053038Jy sigma=1.164706 ! Inverting map ! Added new window around map position (-0.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127671 Jy ! Component: 100 - total flux cleaned = 0.00152654 Jy ! Component: 150 - total flux cleaned = 0.00171156 Jy ! Component: 200 - total flux cleaned = 0.00188336 Jy ! Total flux subtracted in 200 components = 0.00188336 Jy ! Clean residual min=-0.001312 max=0.001223 Jy/beam ! Clean residual mean=-0.000001 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.385184 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 123 components and 0.385184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052974Jy sigma=1.163348 ! Fit after self-cal, rms=0.052970Jy sigma=1.163271 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052970Jy sigma=1.163271 ! Fit after self-cal, rms=0.052683Jy sigma=1.159606 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8886 mas, bmaj=1.888 mas, bpa=-0.8599 degrees ! Estimated noise=0.159974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040803 Jy ! Component: 100 - total flux cleaned = 0.000624214 Jy ! Component: 150 - total flux cleaned = 0.000756877 Jy ! Component: 200 - total flux cleaned = 0.000942231 Jy ! Total flux subtracted in 200 components = 0.000942231 Jy ! Clean residual min=-0.001047 max=0.001150 Jy/beam ! Clean residual mean=-0.000001 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.386126 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.386126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052641Jy sigma=1.158695 ! Fit after self-cal, rms=0.052640Jy sigma=1.158671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841931 Jy ! Component: 100 - total flux cleaned = 0.000961555 Jy ! Component: 150 - total flux cleaned = 0.00109849 Jy ! Component: 200 - total flux cleaned = 0.0012538 Jy ! Total flux subtracted in 200 components = 0.0012538 Jy ! Clean residual min=-0.000973 max=0.000967 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.38738 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.38738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052605Jy sigma=1.157958 ! Fit after self-cal, rms=0.052604Jy sigma=1.157924 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052604Jy sigma=1.157924 ! Fit after self-cal, rms=0.052518Jy sigma=1.157762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8874 mas, bmaj=1.887 mas, bpa=-0.8607 degrees ! Estimated noise=0.159838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262429 Jy ! Component: 100 - total flux cleaned = 0.000396543 Jy ! Component: 150 - total flux cleaned = 0.0005211 Jy ! Component: 200 - total flux cleaned = 0.000639854 Jy ! Total flux subtracted in 200 components = 0.000639854 Jy ! Clean residual min=-0.000889 max=0.000909 Jy/beam ! Clean residual mean=-0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.38802 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 144 components and 0.38802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052494Jy sigma=1.157271 ! Fit after self-cal, rms=0.052493Jy sigma=1.157261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752731 Jy ! Component: 100 - total flux cleaned = 0.00100848 Jy ! Component: 150 - total flux cleaned = 0.00115881 Jy ! Component: 200 - total flux cleaned = 0.0012413 Jy ! Total flux subtracted in 200 components = 0.0012413 Jy ! Clean residual min=-0.000835 max=0.000854 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.389261 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 158 components and 0.389261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052471Jy sigma=1.156833 ! Fit after self-cal, rms=0.052470Jy sigma=1.156811 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052470Jy sigma=1.156811 ! Fit after self-cal, rms=0.052424Jy sigma=1.156776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.045 mas, bmaj=2.858 mas, bpa=-3.098 degrees ! Estimated noise=0.206447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275426 Jy ! Component: 100 - total flux cleaned = 0.000486859 Jy ! Component: 150 - total flux cleaned = 0.000619456 Jy ! Component: 200 - total flux cleaned = 0.000710259 Jy ! Total flux subtracted in 200 components = 0.000710259 Jy ! Clean residual min=-0.000828 max=0.000831 Jy/beam ! Clean residual mean=-0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.389971 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 179 components and 0.389971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052418Jy sigma=1.156645 ! Fit after self-cal, rms=0.052417Jy sigma=1.156626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165893 Jy ! Component: 100 - total flux cleaned = 0.000335042 Jy ! Component: 150 - total flux cleaned = 0.000443481 Jy ! Component: 200 - total flux cleaned = 0.000523532 Jy ! Total flux subtracted in 200 components = 0.000523532 Jy ! Clean residual min=-0.000810 max=0.000816 Jy/beam ! Clean residual mean=-0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.390495 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 187 components and 0.390495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052414Jy sigma=1.156554 ! Fit after self-cal, rms=0.052413Jy sigma=1.156546 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=1.886 mas, bpa=-0.8772 degrees ! Estimated noise=0.15978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 1.886 at -0.8772 degrees (North through East) ! Clean map min=-0.00071269 max=0.1607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6826 mas, bmaj=1.567 mas, bpa=-0.7088 degrees ! Estimated noise=0.311362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141138 Jy ! Component: 100 - total flux cleaned = 0.207401 Jy ! Component: 150 - total flux cleaned = 0.248115 Jy ! Component: 200 - total flux cleaned = 0.274302 Jy ! Total flux subtracted in 200 components = 0.274302 Jy ! Clean residual min=-0.005183 max=0.014485 Jy/beam ! Clean residual mean=0.000004 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.274302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.274302 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=1.886 mas, bpa=-0.8772 degrees ! Estimated noise=0.15978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029923 Jy ! Component: 100 - total flux cleaned = 0.0490925 Jy ! Component: 150 - total flux cleaned = 0.0622784 Jy ! Component: 200 - total flux cleaned = 0.071845 Jy ! Total flux subtracted in 200 components = 0.071845 Jy ! Clean residual min=-0.002279 max=0.005516 Jy/beam ! Clean residual mean=0.000002 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.346147 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 58 components and 0.346147 Jy ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712403 Jy ! Component: 100 - total flux cleaned = 0.0124847 Jy ! Component: 150 - total flux cleaned = 0.0166202 Jy ! Component: 200 - total flux cleaned = 0.0198725 Jy ! Total flux subtracted in 200 components = 0.0198725 Jy ! Clean residual min=-0.001456 max=0.001941 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.366019 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 93 components and 0.366019 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267035 Jy ! Component: 100 - total flux cleaned = 0.00493071 Jy ! Component: 150 - total flux cleaned = 0.00689767 Jy ! Component: 200 - total flux cleaned = 0.00863219 Jy ! Total flux subtracted in 200 components = 0.00863219 Jy ! Clean residual min=-0.001184 max=0.001270 Jy/beam ! Clean residual mean=-0.000000 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.374651 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 121 components and 0.374651 Jy ! Inverting map ! Added new window around map position (-2.8, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157406 Jy ! Component: 100 - total flux cleaned = 0.00296631 Jy ! Component: 150 - total flux cleaned = 0.00421767 Jy ! Component: 200 - total flux cleaned = 0.00534529 Jy ! Total flux subtracted in 200 components = 0.00534529 Jy ! Clean residual min=-0.001027 max=0.000984 Jy/beam ! Clean residual mean=-0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.379997 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 137 components and 0.379997 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.045 mas, bmaj=2.858 mas, bpa=-3.098 degrees ! Estimated noise=0.206447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176105 Jy ! Component: 100 - total flux cleaned = 0.00310661 Jy ! Component: 150 - total flux cleaned = 0.00421521 Jy ! Component: 200 - total flux cleaned = 0.00515347 Jy ! Total flux subtracted in 200 components = 0.00515347 Jy ! Clean residual min=-0.000976 max=0.000871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.38515 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803432 Jy ! Component: 100 - total flux cleaned = 0.00149586 Jy ! Component: 150 - total flux cleaned = 0.00209635 Jy ! Component: 200 - total flux cleaned = 0.00262112 Jy ! Total flux subtracted in 200 components = 0.00262112 Jy ! Clean residual min=-0.000867 max=0.000823 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.387771 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 248 components and 0.387771 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=1.886 mas, bpa=-0.8772 degrees ! Estimated noise=0.15978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033118 Jy ! Component: 100 - total flux cleaned = 0.000577217 Jy ! Component: 150 - total flux cleaned = 0.000724342 Jy ! Component: 200 - total flux cleaned = 0.000792901 Jy ! Total flux subtracted in 200 components = 0.000792901 Jy ! Clean residual min=-0.000789 max=0.000807 Jy/beam ! Clean residual mean=-0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.388564 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 266 components and 0.388564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052379Jy sigma=1.155917 ! Fit after self-cal, rms=0.052365Jy sigma=1.155640 wmodel J1148+1840_X_map.mod ! Writing 266 model components to file: J1148+1840_X_map.mod wobs J1148+1840_X_uvs.fits ! Writing UV FITS file: J1148+1840_X_uvs.fits wwins J1148+1840_X_map.win ! wwins: Wrote 11 windows to J1148+1840_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173413 Jy ! Component: 100 - total flux cleaned = -0.000298797 Jy ! Component: 150 - total flux cleaned = -0.000392608 Jy ! Component: 200 - total flux cleaned = -0.000483432 Jy ! Component: 250 - total flux cleaned = -0.000559314 Jy ! Component: 300 - total flux cleaned = -0.000596392 Jy ! Component: 350 - total flux cleaned = -0.000644695 Jy ! Component: 400 - total flux cleaned = -0.000644533 Jy ! Component: 450 - total flux cleaned = -0.000632876 Jy ! Component: 500 - total flux cleaned = -0.000655794 Jy ! Component: 550 - total flux cleaned = -0.000655713 Jy ! Component: 600 - total flux cleaned = -0.000666812 Jy ! Component: 650 - total flux cleaned = -0.000644643 Jy ! Component: 700 - total flux cleaned = -0.000655627 Jy ! Component: 750 - total flux cleaned = -0.000655705 Jy ! Component: 800 - total flux cleaned = -0.000676964 Jy ! Component: 850 - total flux cleaned = -0.000677003 Jy ! Component: 900 - total flux cleaned = -0.000687515 Jy ! Component: 950 - total flux cleaned = -0.000666781 Jy ! Component: 1000 - total flux cleaned = -0.000687056 Jy ! Component: 1050 - total flux cleaned = -0.000666776 Jy ! Component: 1100 - total flux cleaned = -0.000646923 Jy ! Component: 1150 - total flux cleaned = -0.000656872 Jy ! Component: 1200 - total flux cleaned = -0.000666714 Jy ! Component: 1250 - total flux cleaned = -0.000666603 Jy ! Component: 1300 - total flux cleaned = -0.000637771 Jy ! Component: 1350 - total flux cleaned = -0.00064726 Jy ! Component: 1400 - total flux cleaned = -0.000647188 Jy ! Component: 1450 - total flux cleaned = -0.000637744 Jy ! Component: 1500 - total flux cleaned = -0.000637786 Jy ! Component: 1550 - total flux cleaned = -0.000637743 Jy ! Component: 1600 - total flux cleaned = -0.000591972 Jy ! Component: 1650 - total flux cleaned = -0.000610124 Jy ! Component: 1700 - total flux cleaned = -0.000592019 Jy ! Component: 1750 - total flux cleaned = -0.00063681 Jy ! Component: 1800 - total flux cleaned = -0.000601242 Jy ! Component: 1850 - total flux cleaned = -0.000610105 Jy ! Component: 1900 - total flux cleaned = -0.00057521 Jy ! Component: 1950 - total flux cleaned = -0.000583843 Jy ! Component: 2000 - total flux cleaned = -0.000575151 Jy ! Component: 2050 - total flux cleaned = -0.000558103 Jy ! Component: 2100 - total flux cleaned = -0.000558159 Jy ! Component: 2150 - total flux cleaned = -0.000516019 Jy ! Component: 2200 - total flux cleaned = -0.000524317 Jy ! Component: 2250 - total flux cleaned = -0.000507595 Jy ! Component: 2300 - total flux cleaned = -0.000457935 Jy ! Component: 2350 - total flux cleaned = -0.000441492 Jy ! Component: 2400 - total flux cleaned = -0.00043339 Jy ! Component: 2450 - total flux cleaned = -0.000376556 Jy ! Component: 2500 - total flux cleaned = -0.000384528 Jy ! Component: 2550 - total flux cleaned = -0.000344459 Jy ! Component: 2600 - total flux cleaned = -0.000296699 Jy ! Component: 2650 - total flux cleaned = -0.00028104 Jy ! Component: 2700 - total flux cleaned = -0.000265411 Jy ! Component: 2750 - total flux cleaned = -0.000242067 Jy ! Component: 2800 - total flux cleaned = -0.000265494 Jy ! Component: 2850 - total flux cleaned = -0.000219194 Jy ! Component: 2900 - total flux cleaned = -0.000219266 Jy ! Component: 2950 - total flux cleaned = -0.00019646 Jy ! Component: 3000 - total flux cleaned = -0.000150978 Jy ! Component: 3050 - total flux cleaned = -0.000181011 Jy ! Component: 3100 - total flux cleaned = -0.000188494 Jy ! Component: 3150 - total flux cleaned = -0.000158705 Jy ! Component: 3200 - total flux cleaned = -0.000143864 Jy ! Component: 3250 - total flux cleaned = -0.000158529 Jy ! Component: 3300 - total flux cleaned = -0.000143909 Jy ! Component: 3350 - total flux cleaned = -0.000129347 Jy ! Component: 3400 - total flux cleaned = -0.000129388 Jy ! Component: 3450 - total flux cleaned = -0.00010062 Jy ! Component: 3500 - total flux cleaned = -8.63084e-05 Jy ! Component: 3550 - total flux cleaned = -7.91774e-05 Jy ! Component: 3600 - total flux cleaned = -0.000100465 Jy ! Component: 3650 - total flux cleaned = -5.81416e-05 Jy ! Component: 3700 - total flux cleaned = -4.41796e-05 Jy ! Component: 3750 - total flux cleaned = -2.32925e-05 Jy ! Component: 3800 - total flux cleaned = -9.37549e-06 Jy ! Component: 3850 - total flux cleaned = -1.62909e-05 Jy ! Component: 3900 - total flux cleaned = 4.34446e-06 Jy ! Component: 3950 - total flux cleaned = 3.15932e-05 Jy ! Component: 4000 - total flux cleaned = 1.7992e-05 Jy ! Component: 4050 - total flux cleaned = 2.47641e-05 Jy ! Total flux subtracted in 4096 components = 9.88281e-05 Jy ! Clean residual min=-0.000425 max=0.000391 Jy/beam ! Clean residual mean=0.000000 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.388663 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 591 components and 0.388663 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1148+1840_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8866 x 1.886 at -0.8772 degrees (North through East) ! Clean map min=-0.00055147 max=0.15965 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1148+1840_X_map.fits wmodel /vlbi/uf001/uva//J1148+1840_X_map.mod ! Writing 591 model components to file: /vlbi/uf001/uva//J1148+1840_X_map.mod wobs /vlbi/uf001/uva//J1148+1840_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1148+1840_X_uvs.fits wwins /vlbi/uf001/uva//J1148+1840_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J1148+1840_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.159651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116034 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.21804 0.21804 0.43608 0.87216 1.74432 3.48864 6.97728 13.9546 27.9091 55.8183 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.159 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1375.89 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1148+1840_X_dfm.log closed on Mon Jan 14 01:28:52 2019