! Started logfile: /vlbi/uf001/uvm//J1147-0724_X_a_dfm.log on Sun Jan 13 21:30:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1147-0724_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1147-0724_X_a_uvm.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! AN table 2: 5 integrations on 36 of 36 possible baselines. ! AN table 3: 5 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.815054 visibilities/baseline/integration-bin. ! Found source: J1147-0724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 4548 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1147-0724_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.468391Jy sigma=19.245699 ! Fit after self-cal, rms=0.306395Jy sigma=3.941295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.746 mas, bmaj=1.776 mas, bpa=-10.14 degrees ! Estimated noise=1.36386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.731294 Jy ! Component: 100 - total flux cleaned = 0.913287 Jy ! Total flux subtracted in 100 components = 0.913287 Jy ! Clean residual min=-0.051847 max=0.174260 Jy/beam ! Clean residual mean=-0.000525 rms=0.014680 Jy/beam ! Combined flux in latest and established models = 0.913287 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.913287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.324337Jy sigma=3.980187 ! Fit after self-cal, rms=0.324378Jy sigma=3.976897 ! Inverting map ! Added new window around map position (-1.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149648 Jy ! Component: 100 - total flux cleaned = 0.223992 Jy ! Total flux subtracted in 100 components = 0.223992 Jy ! Clean residual min=-0.035535 max=0.066493 Jy/beam ! Clean residual mean=-0.000318 rms=0.008552 Jy/beam ! Combined flux in latest and established models = 1.13728 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 1.13728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.202955Jy sigma=2.514539 ! Fit after self-cal, rms=0.195818Jy sigma=2.391827 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0604609 Jy ! Component: 100 - total flux cleaned = 0.102637 Jy ! Total flux subtracted in 100 components = 0.102637 Jy ! Clean residual min=-0.026049 max=0.042186 Jy/beam ! Clean residual mean=-0.000224 rms=0.006150 Jy/beam ! Combined flux in latest and established models = 1.23992 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 42 components and 1.23992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153160Jy sigma=1.900956 ! Fit after self-cal, rms=0.151564Jy sigma=1.873352 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9229 mas, bmaj=2.04 mas, bpa=-8.622 degrees ! Estimated noise=0.955422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617416 Jy ! Component: 100 - total flux cleaned = 0.0993776 Jy ! Component: 150 - total flux cleaned = 0.125224 Jy ! Component: 200 - total flux cleaned = 0.143484 Jy ! Total flux subtracted in 200 components = 0.143484 Jy ! Clean residual min=-0.028770 max=0.033676 Jy/beam ! Clean residual mean=-0.000107 rms=0.006036 Jy/beam ! Combined flux in latest and established models = 1.3834 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 73 components and 1.3834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114147Jy sigma=1.480950 ! Fit after self-cal, rms=0.111895Jy sigma=1.447260 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9229 x 2.04 at -8.622 degrees (North through East) ! Clean map min=-0.025342 max=0.96174 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 1.06 ! LA 0.96 MK 1.02 NL 1.12 OV 0.94 ! PT 1.02 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 0.95 KP 0.98 LA 0.97 ! MK 0.98 NL 1.04 OV 0.89 PT 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 KP 1.02 LA 1.00 MK 1.02 ! NL 1.07 OV 0.91 PT 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 1.00 KP 1.05 ! LA 0.95 MK 1.06 NL 1.09 OV 0.93 ! PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.96 KP 0.97 LA 0.97 ! MK 1.00 NL 1.06 OV 0.90 PT 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 KP 1.01 LA 1.02 MK 1.02 ! NL 1.08 OV 0.89 PT 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.96 KP 1.07 ! LA 0.95 MK 1.05 NL 1.09 OV 0.94 ! PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.96 KP 0.94 LA 0.97 ! MK 0.98 NL 1.04 OV 0.92 PT 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 KP 1.01 LA 1.04 MK 1.00 ! NL 1.09 OV 0.89 PT 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 1.00 KP 1.05 ! LA 0.95 MK 1.08 NL 1.10 OV 0.91 ! PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.98 KP 0.97 LA 0.97 ! MK 0.97 NL 1.05 OV 0.90 PT 0.91 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 KP 0.99 LA 1.02 MK 0.99 ! NL 1.09 OV 0.92 PT 0.93 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 0.97 KP 1.05 ! LA 0.94 MK 1.04 NL 1.09 OV 0.93 ! PT 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.95 KP 0.97 LA 0.98 ! MK 1.00 NL 1.05 OV 0.90 PT 0.91 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 KP 1.01 LA 1.04 MK 1.02 ! NL 1.09 OV 0.90 PT 0.93 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.97 KP 1.08 ! LA 0.95 MK 1.03 NL 1.09 OV 0.92 ! PT 1.01 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.98 KP 0.95 LA 0.97 ! MK 0.98 NL 1.06 OV 0.91 PT 0.92 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 KP 1.01 LA 1.02 MK 0.99 ! NL 1.08 OV 0.91 PT 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.95 KP 1.05 ! LA 0.97 MK 1.04 NL 1.10 OV 0.93 ! PT 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.95 KP 0.96 LA 0.99 ! MK 0.98 NL 1.06 OV 0.93 PT 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 KP 1.02 LA 1.03 MK 1.00 ! NL 1.09 OV 0.90 PT 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.96 KP 1.05 ! LA 0.97 MK 1.05 NL 1.09 OV 0.93 ! PT 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.98 KP 0.97 LA 0.98 ! MK 0.96 NL 1.06 OV 0.92 PT 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 KP 1.02 LA 1.04 MK 1.00 ! NL 1.06 OV 0.90 PT 0.93 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 1.00 KP 1.06 ! LA 0.95 MK 1.05 NL 1.07 OV 0.92 ! PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 HN 0.98 KP 0.96 LA 0.98 ! MK 0.99 NL 1.05 OV 0.93 PT 0.93 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 KP 0.99 LA 1.01 MK 0.97 ! NL 1.10 OV 0.90 PT 0.95 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.95 KP 1.04 ! LA 0.95 MK 1.05 NL 1.08 OV 0.93 ! PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 HN 0.96 KP 0.97 LA 0.97 ! MK 1.01 NL 1.07 OV 0.90 PT 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 KP 1.02 LA 1.01 MK 0.98 ! NL 1.07 OV 0.91 PT 0.94 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.97 KP 1.04 ! LA 0.96 MK 1.05 NL 1.11 OV 0.94 ! PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 0.98 KP 0.96 LA 1.00 ! MK 1.07 NL 1.06 OV 0.91 PT 0.93 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 KP 1.01 LA 1.03 MK 1.00 ! NL 1.06 OV 0.89 PT 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.95 KP 1.07 ! LA 0.94 MK 1.06 NL 1.11 OV 0.92 ! PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.98 KP 0.98 LA 0.99 ! MK 1.07 NL 1.05 OV 0.90 PT 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 KP 1.02 LA 1.01 MK 0.98 ! NL 1.07 OV 0.89 PT 0.95 ! ! ! Fit before self-cal, rms=0.111895Jy sigma=1.447260 ! Fit after self-cal, rms=0.074283Jy sigma=0.946257 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=2.057 mas, bpa=-7.921 degrees ! Estimated noise=0.958668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331846 Jy ! Component: 100 - total flux cleaned = 0.000299799 Jy ! Component: 150 - total flux cleaned = 0.000596615 Jy ! Component: 200 - total flux cleaned = 0.000601937 Jy ! Total flux subtracted in 200 components = 0.000601937 Jy ! Clean residual min=-0.012441 max=0.009032 Jy/beam ! Clean residual mean=-0.000019 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 1.384 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 1.384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071141Jy sigma=0.900355 ! Fit after self-cal, rms=0.070878Jy sigma=0.896930 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070878Jy sigma=0.896930 ! Fit after self-cal, rms=0.070324Jy sigma=0.892787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=2.055 mas, bpa=-7.825 degrees ! Estimated noise=0.956655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112397 Jy ! Component: 100 - total flux cleaned = -0.000596516 Jy ! Component: 150 - total flux cleaned = -0.000127135 Jy ! Component: 200 - total flux cleaned = -0.000134096 Jy ! Total flux subtracted in 200 components = -0.000134096 Jy ! Clean residual min=-0.010573 max=0.008096 Jy/beam ! Clean residual mean=-0.000015 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 1.38387 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 1.38387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068533Jy sigma=0.866995 ! Fit after self-cal, rms=0.068410Jy sigma=0.865515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272888 Jy ! Component: 100 - total flux cleaned = -8.10479e-05 Jy ! Component: 150 - total flux cleaned = 8.87852e-05 Jy ! Component: 200 - total flux cleaned = 8.60108e-05 Jy ! Total flux subtracted in 200 components = 8.60108e-05 Jy ! Clean residual min=-0.009409 max=0.007190 Jy/beam ! Clean residual mean=-0.000015 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 1.38395 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 1.38395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067516Jy sigma=0.853631 ! Fit after self-cal, rms=0.067468Jy sigma=0.852982 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067468Jy sigma=0.852982 ! Fit after self-cal, rms=0.067034Jy sigma=0.848255 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.922 mas, bmaj=2.053 mas, bpa=-7.749 degrees ! Estimated noise=0.955769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232164 Jy ! Component: 100 - total flux cleaned = 0.000286082 Jy ! Component: 150 - total flux cleaned = 0.000284976 Jy ! Component: 200 - total flux cleaned = 0.00042675 Jy ! Total flux subtracted in 200 components = 0.00042675 Jy ! Clean residual min=-0.008222 max=0.006903 Jy/beam ! Clean residual mean=-0.000009 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 1.38438 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 1.38438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066214Jy sigma=0.836604 ! Fit after self-cal, rms=0.066171Jy sigma=0.836051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155647 Jy ! Component: 100 - total flux cleaned = -0.000285137 Jy ! Component: 150 - total flux cleaned = -0.000400082 Jy ! Component: 200 - total flux cleaned = -0.00050758 Jy ! Total flux subtracted in 200 components = -0.00050758 Jy ! Clean residual min=-0.007444 max=0.006247 Jy/beam ! Clean residual mean=-0.000009 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 1.38387 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 1.38387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065770Jy sigma=0.830753 ! Fit after self-cal, rms=0.065756Jy sigma=0.830487 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065756Jy sigma=0.830487 ! Fit after self-cal, rms=0.065533Jy sigma=0.827745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=3.379 mas, bpa=-10.26 degrees ! Estimated noise=1.32462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335903 Jy ! Component: 100 - total flux cleaned = 0.0036016 Jy ! Component: 150 - total flux cleaned = 0.00381125 Jy ! Component: 200 - total flux cleaned = 0.00399646 Jy ! Total flux subtracted in 200 components = 0.00399646 Jy ! Clean residual min=-0.006845 max=0.004733 Jy/beam ! Clean residual mean=-0.000001 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 1.38787 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 90 components and 1.38787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065366Jy sigma=0.825643 ! Fit after self-cal, rms=0.065359Jy sigma=0.825530 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161253 Jy ! Component: 100 - total flux cleaned = -4.8727e-05 Jy ! Component: 150 - total flux cleaned = 1.48757e-06 Jy ! Component: 200 - total flux cleaned = 4.86042e-05 Jy ! Total flux subtracted in 200 components = 4.86042e-05 Jy ! Clean residual min=-0.006745 max=0.004590 Jy/beam ! Clean residual mean=-0.000001 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 1.38792 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 92 components and 1.38792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065300Jy sigma=0.824451 ! Fit after self-cal, rms=0.065295Jy sigma=0.824350 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9208 mas, bmaj=2.051 mas, bpa=-7.694 degrees ! Estimated noise=0.955388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9208 x 2.051 at -7.694 degrees (North through East) ! Clean map min=-0.0063057 max=0.95857 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065295Jy sigma=0.824350 ! Fit after self-cal, rms=0.060260Jy sigma=0.773922 ! Inverting map and beam ! Estimated beam: bmin=0.9201 mas, bmaj=2.05 mas, bpa=-7.729 degrees ! Estimated noise=0.955361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310146 Jy ! Component: 100 - total flux cleaned = -0.000773741 Jy ! Component: 150 - total flux cleaned = -0.000980454 Jy ! Component: 200 - total flux cleaned = -0.00116477 Jy ! Total flux subtracted in 200 components = -0.00116477 Jy ! Clean residual min=-0.006146 max=0.005355 Jy/beam ! Clean residual mean=-0.000003 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 1.38675 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 1.38675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059834Jy sigma=0.767987 ! Fit after self-cal, rms=0.059815Jy sigma=0.767654 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019654 Jy ! Component: 100 - total flux cleaned = -0.000533988 Jy ! Component: 150 - total flux cleaned = -0.000685461 Jy ! Component: 200 - total flux cleaned = -0.000757412 Jy ! Total flux subtracted in 200 components = -0.000757412 Jy ! Clean residual min=-0.005687 max=0.005151 Jy/beam ! Clean residual mean=-0.000004 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 1.386 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 1.386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059615Jy sigma=0.765091 ! Fit after self-cal, rms=0.059610Jy sigma=0.764953 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059610Jy sigma=0.764953 ! Fit after self-cal, rms=0.059485Jy sigma=0.763395 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7417 mas, bmaj=1.783 mas, bpa=-9.667 degrees ! Estimated noise=1.37309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.728043 Jy ! Component: 100 - total flux cleaned = 0.952832 Jy ! Component: 150 - total flux cleaned = 1.06818 Jy ! Component: 200 - total flux cleaned = 1.142 Jy ! Total flux subtracted in 200 components = 1.142 Jy ! Clean residual min=-0.020870 max=0.041634 Jy/beam ! Clean residual mean=-0.000243 rms=0.005922 Jy/beam ! Combined flux in latest and established models = 1.142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.142 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9192 mas, bmaj=2.049 mas, bpa=-7.687 degrees ! Estimated noise=0.955075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.085511 Jy ! Component: 100 - total flux cleaned = 0.138292 Jy ! Component: 150 - total flux cleaned = 0.172115 Jy ! Component: 200 - total flux cleaned = 0.194443 Jy ! Total flux subtracted in 200 components = 0.194443 Jy ! Clean residual min=-0.006568 max=0.012497 Jy/beam ! Clean residual mean=-0.000065 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 1.33645 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 48 components and 1.33645 Jy ! Inverting map ! Added new window around map position (-2.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150854 Jy ! Component: 100 - total flux cleaned = 0.0253876 Jy ! Component: 150 - total flux cleaned = 0.0327682 Jy ! Component: 200 - total flux cleaned = 0.0382787 Jy ! Total flux subtracted in 200 components = 0.0382787 Jy ! Clean residual min=-0.005721 max=0.004895 Jy/beam ! Clean residual mean=-0.000016 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 1.37472 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 1.37472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=3.375 mas, bpa=-10.24 degrees ! Estimated noise=1.32745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701124 Jy ! Component: 100 - total flux cleaned = 0.0109601 Jy ! Component: 150 - total flux cleaned = 0.0133798 Jy ! Component: 200 - total flux cleaned = 0.014762 Jy ! Total flux subtracted in 200 components = 0.014762 Jy ! Clean residual min=-0.004911 max=0.004075 Jy/beam ! Clean residual mean=0.000007 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 1.38949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449675 Jy ! Component: 100 - total flux cleaned = 0.000601032 Jy ! Component: 150 - total flux cleaned = 0.000772696 Jy ! Component: 200 - total flux cleaned = 0.000866398 Jy ! Total flux subtracted in 200 components = 0.000866398 Jy ! Clean residual min=-0.004795 max=0.004012 Jy/beam ! Clean residual mean=0.000010 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 1.39035 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 101 components and 1.39035 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9192 mas, bmaj=2.049 mas, bpa=-7.687 degrees ! Estimated noise=0.955075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012407 Jy ! Component: 100 - total flux cleaned = -0.00107761 Jy ! Component: 150 - total flux cleaned = -0.000889243 Jy ! Component: 200 - total flux cleaned = -0.000717174 Jy ! Total flux subtracted in 200 components = -0.000717174 Jy ! Clean residual min=-0.005006 max=0.004137 Jy/beam ! Clean residual mean=0.000003 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.38964 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 1.38964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058477Jy sigma=0.752231 ! Fit after self-cal, rms=0.058383Jy sigma=0.750898 wmodel J1147-0724_X_a_map.mod ! Writing 116 model components to file: J1147-0724_X_a_map.mod wobs J1147-0724_X_a_uvs.fits ! Writing UV FITS file: J1147-0724_X_a_uvs.fits wwins J1147-0724_X_a_map.win ! wwins: Wrote 3 windows to J1147-0724_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181406 Jy ! Component: 100 - total flux cleaned = -0.00195615 Jy ! Component: 150 - total flux cleaned = -0.00182174 Jy ! Component: 200 - total flux cleaned = -0.00156746 Jy ! Component: 250 - total flux cleaned = -0.00156778 Jy ! Component: 300 - total flux cleaned = -0.00145366 Jy ! Component: 350 - total flux cleaned = -0.00123209 Jy ! Component: 400 - total flux cleaned = -0.0011239 Jy ! Component: 450 - total flux cleaned = -0.00107008 Jy ! Component: 500 - total flux cleaned = -0.000866326 Jy ! Component: 550 - total flux cleaned = -0.000570207 Jy ! Component: 600 - total flux cleaned = -0.000328872 Jy ! Component: 650 - total flux cleaned = -9.28443e-05 Jy ! Component: 700 - total flux cleaned = -6.18447e-07 Jy ! Component: 750 - total flux cleaned = 9.0702e-05 Jy ! Component: 800 - total flux cleaned = 0.000179278 Jy ! Component: 850 - total flux cleaned = 0.000353603 Jy ! Component: 900 - total flux cleaned = 0.000310556 Jy ! Component: 950 - total flux cleaned = 0.000436951 Jy ! Component: 1000 - total flux cleaned = 0.000519395 Jy ! Component: 1050 - total flux cleaned = 0.000559857 Jy ! Component: 1100 - total flux cleaned = 0.00071931 Jy ! Component: 1150 - total flux cleaned = 0.000718149 Jy ! Component: 1200 - total flux cleaned = 0.000640461 Jy ! Component: 1250 - total flux cleaned = 0.000793564 Jy ! Component: 1300 - total flux cleaned = 0.000905934 Jy ! Component: 1350 - total flux cleaned = 0.000831839 Jy ! Component: 1400 - total flux cleaned = 0.00090546 Jy ! Component: 1450 - total flux cleaned = 0.000905329 Jy ! Component: 1500 - total flux cleaned = 0.000941371 Jy ! Component: 1550 - total flux cleaned = 0.00101319 Jy ! Component: 1600 - total flux cleaned = 0.00104741 Jy ! Component: 1650 - total flux cleaned = 0.00118513 Jy ! Component: 1700 - total flux cleaned = 0.00111681 Jy ! Component: 1750 - total flux cleaned = 0.00108358 Jy ! Component: 1800 - total flux cleaned = 0.00101786 Jy ! Component: 1850 - total flux cleaned = 0.00108416 Jy ! Component: 1900 - total flux cleaned = 0.00121413 Jy ! Component: 1950 - total flux cleaned = 0.00118235 Jy ! Component: 2000 - total flux cleaned = 0.00118256 Jy ! Component: 2050 - total flux cleaned = 0.00124557 Jy ! Component: 2100 - total flux cleaned = 0.00115199 Jy ! Component: 2150 - total flux cleaned = 0.00118294 Jy ! Component: 2200 - total flux cleaned = 0.00124446 Jy ! Component: 2250 - total flux cleaned = 0.00121466 Jy ! Component: 2300 - total flux cleaned = 0.00124545 Jy ! Component: 2350 - total flux cleaned = 0.00127562 Jy ! Component: 2400 - total flux cleaned = 0.0013935 Jy ! Component: 2450 - total flux cleaned = 0.00148112 Jy ! Component: 2500 - total flux cleaned = 0.00150981 Jy ! Component: 2550 - total flux cleaned = 0.00153826 Jy ! Component: 2600 - total flux cleaned = 0.0015951 Jy ! Component: 2650 - total flux cleaned = 0.00159473 Jy ! Component: 2700 - total flux cleaned = 0.00156653 Jy ! Component: 2750 - total flux cleaned = 0.0015115 Jy ! Component: 2800 - total flux cleaned = 0.00153893 Jy ! Component: 2850 - total flux cleaned = 0.00156615 Jy ! Component: 2900 - total flux cleaned = 0.00153892 Jy ! Component: 2950 - total flux cleaned = 0.00164592 Jy ! Component: 3000 - total flux cleaned = 0.00167236 Jy ! Component: 3050 - total flux cleaned = 0.00180429 Jy ! Component: 3100 - total flux cleaned = 0.00175191 Jy ! Component: 3150 - total flux cleaned = 0.00177791 Jy ! Component: 3200 - total flux cleaned = 0.00180361 Jy ! Component: 3250 - total flux cleaned = 0.00180352 Jy ! Component: 3300 - total flux cleaned = 0.00180373 Jy ! Component: 3350 - total flux cleaned = 0.00177856 Jy ! Component: 3400 - total flux cleaned = 0.00187916 Jy ! Component: 3450 - total flux cleaned = 0.00187924 Jy ! Component: 3500 - total flux cleaned = 0.00197822 Jy ! Component: 3550 - total flux cleaned = 0.0019536 Jy ! Component: 3600 - total flux cleaned = 0.00200252 Jy ! Component: 3650 - total flux cleaned = 0.00207546 Jy ! Component: 3700 - total flux cleaned = 0.0021237 Jy ! Component: 3750 - total flux cleaned = 0.00219536 Jy ! Component: 3800 - total flux cleaned = 0.00221931 Jy ! Component: 3850 - total flux cleaned = 0.002219 Jy ! Component: 3900 - total flux cleaned = 0.00226609 Jy ! Component: 3950 - total flux cleaned = 0.00238316 Jy ! Component: 4000 - total flux cleaned = 0.0024529 Jy ! Component: 4050 - total flux cleaned = 0.00242981 Jy ! Total flux subtracted in 4096 components = 0.0024525 Jy ! Clean residual min=-0.001400 max=0.001312 Jy/beam ! Clean residual mean=0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 1.39209 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 409 components and 1.39209 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1147-0724_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9192 x 2.049 at -7.687 degrees (North through East) ! Clean map min=-0.0026868 max=0.9658 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1147-0724_X_a_map.fits wmodel /vlbi/uf001/uvm//J1147-0724_X_a_map.mod ! Writing 409 model components to file: /vlbi/uf001/uvm//J1147-0724_X_a_map.mod wobs /vlbi/uf001/uvm//J1147-0724_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1147-0724_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1147-0724_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J1147-0724_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.965799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000394475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122533 0.122533 0.245066 0.490133 0.980265 1.96053 3.92106 7.84212 15.6842 31.3685 62.737 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.965 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2448.32 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1147-0724_X_a_dfm.log closed on Sun Jan 13 21:30:41 2019