! Started logfile: /vlbi/uf001/uva//J1146+5356_X_dfm.log on Mon Jan 14 01:27:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1146+5356_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1146+5356_X_uva.fits ! AN table 1: 38 integrations on 36 of 36 possible baselines. ! AN table 2: 19 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.968324 visibilities/baseline/integration-bin. ! Found source: J1146+5356 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23844 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1146+5356_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.074709Jy sigma=23.583095 ! Fit after self-cal, rms=0.627555Jy sigma=13.817924 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.768 mas, bmaj=0.9434 mas, bpa=6.024 degrees ! Estimated noise=0.452278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280659 Jy ! Component: 100 - total flux cleaned = 0.345772 Jy ! Total flux subtracted in 100 components = 0.345772 Jy ! Clean residual min=-0.010625 max=0.024198 Jy/beam ! Clean residual mean=0.000033 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 0.345772 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.345772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088885Jy sigma=1.876737 ! Fit after self-cal, rms=0.088849Jy sigma=1.875746 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024983 Jy ! Component: 100 - total flux cleaned = 0.0365779 Jy ! Total flux subtracted in 100 components = 0.0365779 Jy ! Clean residual min=-0.009572 max=0.017794 Jy/beam ! Clean residual mean=0.000029 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.38235 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.38235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077926Jy sigma=1.648157 ! Fit after self-cal, rms=0.077874Jy sigma=1.647098 ! Inverting map ! Added new window around map position (-0.6, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151891 Jy ! Component: 100 - total flux cleaned = 0.0232796 Jy ! Total flux subtracted in 100 components = 0.0232796 Jy ! Clean residual min=-0.009927 max=0.011137 Jy/beam ! Clean residual mean=0.000023 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.405629 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.405629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072896Jy sigma=1.539393 ! Fit after self-cal, rms=0.072647Jy sigma=1.533752 ! Inverting map ! Added new window around map position (1.8, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00964199 Jy ! Component: 100 - total flux cleaned = 0.0154164 Jy ! Total flux subtracted in 100 components = 0.0154164 Jy ! Clean residual min=-0.008428 max=0.009637 Jy/beam ! Clean residual mean=0.000020 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.421046 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.421046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070442Jy sigma=1.484419 ! Fit after self-cal, rms=0.070316Jy sigma=1.481592 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9853 mas, bmaj=1.258 mas, bpa=11.83 degrees ! Estimated noise=0.218966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166378 Jy ! Component: 100 - total flux cleaned = 0.0270146 Jy ! Component: 150 - total flux cleaned = 0.0349525 Jy ! Component: 200 - total flux cleaned = 0.0414002 Jy ! Total flux subtracted in 200 components = 0.0414002 Jy ! Clean residual min=-0.006785 max=0.009172 Jy/beam ! Clean residual mean=0.000050 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 0.462446 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 70 components and 0.462446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065423Jy sigma=1.371552 ! Fit after self-cal, rms=0.065116Jy sigma=1.364820 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9853 x 1.258 at 11.83 degrees (North through East) ! Clean map min=-0.0063973 max=0.36724 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.95 KP 0.99 LA 1.01 ! MK 1.04 NL 1.09 OV 0.95 PT 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 HN 0.95 KP 1.03 LA 1.00 ! MK 0.99 NL 1.08 OV 0.93 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.96 KP 0.98 LA 1.00 ! MK 1.06 NL 1.09 OV 0.95 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 HN 0.96 KP 1.02 LA 1.02 ! MK 1.01 NL 1.07 OV 0.93 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.96 KP 0.98 LA 1.00 ! MK 1.04 NL 1.11 OV 0.96 PT 0.93 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 0.99 KP 1.02 LA 1.00 ! MK 1.01 NL 1.10 OV 0.93 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 0.95 KP 0.97 LA 1.01 ! MK 1.05 NL 1.09 OV 0.94 PT 0.93 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 0.96 KP 1.01 LA 1.00 ! MK 1.01 NL 1.10 OV 0.93 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.95 KP 0.98 LA 1.01 ! MK 1.04 NL 1.09 OV 0.95 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 HN 0.98 KP 1.02 LA 1.01 ! MK 1.01 NL 1.09 OV 0.94 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.96 KP 0.98 LA 1.00 ! MK 1.06 NL 1.09 OV 0.95 PT 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.97 KP 1.02 LA 1.00 ! MK 1.01 NL 1.08 OV 0.94 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.97 KP 0.97 LA 0.99 ! MK 1.06 NL 1.10 OV 0.96 PT 0.93 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.98 KP 1.01 LA 1.01 ! MK 0.99 NL 1.07 OV 0.95 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.96 KP 0.99 LA 1.02 ! MK 1.06 NL 1.10 OV 0.95 PT 0.92 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 HN 0.97 KP 1.03 LA 1.00 ! MK 0.99 NL 1.07 OV 0.94 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.97 KP 0.96 LA 1.00 ! MK 1.06 NL 1.10 OV 0.95 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 1.00 KP 1.02 LA 0.99 ! MK 0.99 NL 1.08 OV 0.92 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.94 KP 0.98 LA 1.02 ! MK 1.06 NL 1.10 OV 0.94 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 0.96 KP 1.05 LA 0.99 ! MK 0.99 NL 1.12 OV 0.94 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.97 KP 1.00 LA 1.00 ! MK 1.03 NL 1.09 OV 0.95 PT 0.93 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 HN 0.99 KP 1.04 LA 0.98 ! MK 1.02 NL 1.08 OV 0.92 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.97 KP 0.98 LA 1.02 ! MK 1.08 NL 1.09 OV 0.93 PT 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 HN 0.99 KP 1.01 LA 1.02 ! MK 1.01 NL 1.10 OV 0.91 PT 0.93 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.065116Jy sigma=1.364820 ! Fit after self-cal, rms=0.058876Jy sigma=1.235609 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9872 mas, bmaj=1.26 mas, bpa=12.39 degrees ! Estimated noise=0.217563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348539 Jy ! Component: 100 - total flux cleaned = 0.00517047 Jy ! Component: 150 - total flux cleaned = 0.00664759 Jy ! Component: 200 - total flux cleaned = 0.00729844 Jy ! Total flux subtracted in 200 components = 0.00729844 Jy ! Clean residual min=-0.003248 max=0.003800 Jy/beam ! Clean residual mean=0.000021 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.469744 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.469744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057973Jy sigma=1.214112 ! Fit after self-cal, rms=0.057931Jy sigma=1.212746 ! Inverting map ! Added new window around map position (0.4, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037666 Jy ! Component: 100 - total flux cleaned = 0.00499898 Jy ! Component: 150 - total flux cleaned = 0.00526223 Jy ! Component: 200 - total flux cleaned = 0.00533831 Jy ! Total flux subtracted in 200 components = 0.00533831 Jy ! Clean residual min=-0.002891 max=0.002938 Jy/beam ! Clean residual mean=0.000015 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.475083 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.475082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057592Jy sigma=1.204479 ! Fit after self-cal, rms=0.057571Jy sigma=1.204102 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057571Jy sigma=1.204102 ! Fit after self-cal, rms=0.056981Jy sigma=1.192523 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9853 mas, bmaj=1.261 mas, bpa=12.36 degrees ! Estimated noise=0.21717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165952 Jy ! Component: 100 - total flux cleaned = 0.00189242 Jy ! Component: 150 - total flux cleaned = 0.00189458 Jy ! Component: 200 - total flux cleaned = 0.00201493 Jy ! Total flux subtracted in 200 components = 0.00201493 Jy ! Clean residual min=-0.002113 max=0.001827 Jy/beam ! Clean residual mean=0.000015 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.477097 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 128 components and 0.477097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056813Jy sigma=1.188412 ! Fit after self-cal, rms=0.056806Jy sigma=1.188236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617591 Jy ! Component: 100 - total flux cleaned = 0.000773356 Jy ! Component: 150 - total flux cleaned = 0.000821706 Jy ! Component: 200 - total flux cleaned = 0.000909575 Jy ! Total flux subtracted in 200 components = 0.000909575 Jy ! Clean residual min=-0.001996 max=0.001614 Jy/beam ! Clean residual mean=0.000014 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.478007 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.478007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056735Jy sigma=1.186394 ! Fit after self-cal, rms=0.056731Jy sigma=1.186337 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056731Jy sigma=1.186337 ! Fit after self-cal, rms=0.056636Jy sigma=1.185821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9851 mas, bmaj=1.261 mas, bpa=12.26 degrees ! Estimated noise=0.217016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198367 Jy ! Component: 100 - total flux cleaned = -0.000200698 Jy ! Component: 150 - total flux cleaned = -0.000200651 Jy ! Component: 200 - total flux cleaned = -0.000162885 Jy ! Total flux subtracted in 200 components = -0.000162885 Jy ! Clean residual min=-0.001768 max=0.001481 Jy/beam ! Clean residual mean=0.000015 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.477844 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.477844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056571Jy sigma=1.184188 ! Fit after self-cal, rms=0.056568Jy sigma=1.184141 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249244 Jy ! Component: 100 - total flux cleaned = 0.000284186 Jy ! Component: 150 - total flux cleaned = 0.000285436 Jy ! Component: 200 - total flux cleaned = 0.000346485 Jy ! Total flux subtracted in 200 components = 0.000346485 Jy ! Clean residual min=-0.001752 max=0.001425 Jy/beam ! Clean residual mean=0.000015 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.478191 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 136 components and 0.478191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056536Jy sigma=1.183280 ! Fit after self-cal, rms=0.056534Jy sigma=1.183250 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056534Jy sigma=1.183250 ! Fit after self-cal, rms=0.056476Jy sigma=1.182948 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=2.563 mas, bpa=18.46 degrees ! Estimated noise=0.286023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102435 Jy ! Component: 100 - total flux cleaned = -0.000883916 Jy ! Component: 150 - total flux cleaned = -0.00065676 Jy ! Component: 200 - total flux cleaned = -0.000474559 Jy ! Total flux subtracted in 200 components = -0.000474559 Jy ! Clean residual min=-0.001870 max=0.001662 Jy/beam ! Clean residual mean=0.000036 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.477716 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 146 components and 0.477716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056474Jy sigma=1.182873 ! Fit after self-cal, rms=0.056469Jy sigma=1.182767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.47955e-05 Jy ! Component: 100 - total flux cleaned = 0.000229315 Jy ! Component: 150 - total flux cleaned = 0.000274289 Jy ! Component: 200 - total flux cleaned = 0.00029437 Jy ! Total flux subtracted in 200 components = 0.00029437 Jy ! Clean residual min=-0.001760 max=0.001658 Jy/beam ! Clean residual mean=0.000034 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.47801 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.47801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056472Jy sigma=1.182776 ! Fit after self-cal, rms=0.056470Jy sigma=1.182756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9848 mas, bmaj=1.26 mas, bpa=12.21 degrees ! Estimated noise=0.21693 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9848 x 1.26 at 12.21 degrees (North through East) ! Clean map min=-0.0014752 max=0.36465 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.769 mas, bmaj=0.9435 mas, bpa=6.789 degrees ! Estimated noise=0.449429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278754 Jy ! Component: 100 - total flux cleaned = 0.344328 Jy ! Component: 150 - total flux cleaned = 0.369895 Jy ! Component: 200 - total flux cleaned = 0.384797 Jy ! Total flux subtracted in 200 components = 0.384797 Jy ! Clean residual min=-0.003966 max=0.008324 Jy/beam ! Clean residual mean=0.000025 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.384797 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.384797 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9848 mas, bmaj=1.26 mas, bpa=12.21 degrees ! Estimated noise=0.21693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210809 Jy ! Component: 100 - total flux cleaned = 0.0347531 Jy ! Component: 150 - total flux cleaned = 0.0447273 Jy ! Component: 200 - total flux cleaned = 0.0523972 Jy ! Total flux subtracted in 200 components = 0.0523972 Jy ! Clean residual min=-0.002900 max=0.004510 Jy/beam ! Clean residual mean=0.000054 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.437194 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 78 components and 0.437194 Jy ! Inverting map ! Added new window around map position (0.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612234 Jy ! Component: 100 - total flux cleaned = 0.0111322 Jy ! Component: 150 - total flux cleaned = 0.015313 Jy ! Component: 200 - total flux cleaned = 0.0188648 Jy ! Total flux subtracted in 200 components = 0.0188648 Jy ! Clean residual min=-0.002147 max=0.002526 Jy/beam ! Clean residual mean=0.000035 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.456059 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 123 components and 0.456059 Jy ! Inverting map ! Added new window around map position (1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309874 Jy ! Component: 100 - total flux cleaned = 0.00573585 Jy ! Component: 150 - total flux cleaned = 0.00802219 Jy ! Component: 200 - total flux cleaned = 0.0100128 Jy ! Total flux subtracted in 200 components = 0.0100128 Jy ! Clean residual min=-0.001767 max=0.001741 Jy/beam ! Clean residual mean=0.000026 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.466072 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 154 components and 0.466072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=2.563 mas, bpa=18.46 degrees ! Estimated noise=0.286023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326916 Jy ! Component: 100 - total flux cleaned = 0.0055835 Jy ! Component: 150 - total flux cleaned = 0.00732867 Jy ! Component: 200 - total flux cleaned = 0.00867666 Jy ! Total flux subtracted in 200 components = 0.00867666 Jy ! Clean residual min=-0.001667 max=0.001812 Jy/beam ! Clean residual mean=0.000042 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.474748 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104841 Jy ! Component: 100 - total flux cleaned = 0.00186567 Jy ! Component: 150 - total flux cleaned = 0.00250413 Jy ! Component: 200 - total flux cleaned = 0.00283625 Jy ! Total flux subtracted in 200 components = 0.00283625 Jy ! Clean residual min=-0.001655 max=0.001537 Jy/beam ! Clean residual mean=0.000035 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.477584 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 231 components and 0.477585 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9848 mas, bmaj=1.26 mas, bpa=12.21 degrees ! Estimated noise=0.21693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182758 Jy ! Component: 100 - total flux cleaned = 0.000218064 Jy ! Component: 150 - total flux cleaned = 0.000184638 Jy ! Component: 200 - total flux cleaned = 0.000212067 Jy ! Total flux subtracted in 200 components = 0.000212067 Jy ! Clean residual min=-0.001478 max=0.001411 Jy/beam ! Clean residual mean=0.000014 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.477797 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 248 components and 0.477797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056414Jy sigma=1.181048 ! Fit after self-cal, rms=0.056398Jy sigma=1.180704 wmodel J1146+5356_X_map.mod ! Writing 248 model components to file: J1146+5356_X_map.mod wobs J1146+5356_X_uvs.fits ! Writing UV FITS file: J1146+5356_X_uvs.fits wwins J1146+5356_X_map.win ! wwins: Wrote 8 windows to J1146+5356_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224206 Jy ! Component: 100 - total flux cleaned = -0.00042339 Jy ! Component: 150 - total flux cleaned = -0.000470223 Jy ! Component: 200 - total flux cleaned = -0.00047055 Jy ! Component: 250 - total flux cleaned = -0.00049242 Jy ! Component: 300 - total flux cleaned = -0.000450917 Jy ! Component: 350 - total flux cleaned = -0.000329847 Jy ! Component: 400 - total flux cleaned = -0.000309886 Jy ! Component: 450 - total flux cleaned = -0.000193647 Jy ! Component: 500 - total flux cleaned = -0.000155384 Jy ! Component: 550 - total flux cleaned = -8.16507e-05 Jy ! Component: 600 - total flux cleaned = -6.36236e-05 Jy ! Component: 650 - total flux cleaned = -2.79868e-05 Jy ! Component: 700 - total flux cleaned = -4.52437e-05 Jy ! Component: 750 - total flux cleaned = 5.93702e-06 Jy ! Component: 800 - total flux cleaned = 3.97035e-05 Jy ! Component: 850 - total flux cleaned = 0.000122568 Jy ! Component: 900 - total flux cleaned = 0.000138871 Jy ! Component: 950 - total flux cleaned = 0.000203175 Jy ! Component: 1000 - total flux cleaned = 0.000218786 Jy ! Component: 1050 - total flux cleaned = 0.000296799 Jy ! Component: 1100 - total flux cleaned = 0.000342836 Jy ! Component: 1150 - total flux cleaned = 0.000403694 Jy ! Component: 1200 - total flux cleaned = 0.000448718 Jy ! Component: 1250 - total flux cleaned = 0.00055251 Jy ! Component: 1300 - total flux cleaned = 0.00061069 Jy ! Component: 1350 - total flux cleaned = 0.000654104 Jy ! Component: 1400 - total flux cleaned = 0.000725393 Jy ! Component: 1450 - total flux cleaned = 0.000753606 Jy ! Component: 1500 - total flux cleaned = 0.000809498 Jy ! Component: 1550 - total flux cleaned = 0.000864811 Jy ! Component: 1600 - total flux cleaned = 0.000932791 Jy ! Component: 1650 - total flux cleaned = 0.000946286 Jy ! Component: 1700 - total flux cleaned = 0.000959589 Jy ! Component: 1750 - total flux cleaned = 0.0010127 Jy ! Component: 1800 - total flux cleaned = 0.00107814 Jy ! Component: 1850 - total flux cleaned = 0.00111699 Jy ! Component: 1900 - total flux cleaned = 0.00111697 Jy ! Component: 1950 - total flux cleaned = 0.00115495 Jy ! Component: 2000 - total flux cleaned = 0.0011802 Jy ! Component: 2050 - total flux cleaned = 0.0012302 Jy ! Component: 2100 - total flux cleaned = 0.00124266 Jy ! Component: 2150 - total flux cleaned = 0.00127948 Jy ! Component: 2200 - total flux cleaned = 0.00130375 Jy ! Component: 2250 - total flux cleaned = 0.00133978 Jy ! Component: 2300 - total flux cleaned = 0.00136375 Jy ! Component: 2350 - total flux cleaned = 0.00142312 Jy ! Component: 2400 - total flux cleaned = 0.0014348 Jy ! Component: 2450 - total flux cleaned = 0.00146977 Jy ! Component: 2500 - total flux cleaned = 0.00148128 Jy ! Component: 2550 - total flux cleaned = 0.00144685 Jy ! Component: 2600 - total flux cleaned = 0.00150378 Jy ! Component: 2650 - total flux cleaned = 0.00153776 Jy ! Component: 2700 - total flux cleaned = 0.00156012 Jy ! Component: 2750 - total flux cleaned = 0.0015711 Jy ! Component: 2800 - total flux cleaned = 0.00153798 Jy ! Component: 2850 - total flux cleaned = 0.00151611 Jy ! Component: 2900 - total flux cleaned = 0.00155955 Jy ! Component: 2950 - total flux cleaned = 0.00158109 Jy ! Component: 3000 - total flux cleaned = 0.00159188 Jy ! Component: 3050 - total flux cleaned = 0.00157053 Jy ! Component: 3100 - total flux cleaned = 0.00159157 Jy ! Component: 3150 - total flux cleaned = 0.00157055 Jy ! Component: 3200 - total flux cleaned = 0.00156021 Jy ! Component: 3250 - total flux cleaned = 0.00158104 Jy ! Component: 3300 - total flux cleaned = 0.00157084 Jy ! Component: 3350 - total flux cleaned = 0.00158108 Jy ! Component: 3400 - total flux cleaned = 0.00156075 Jy ! Component: 3450 - total flux cleaned = 0.0015507 Jy ! Component: 3500 - total flux cleaned = 0.00152071 Jy ! Component: 3550 - total flux cleaned = 0.00151078 Jy ! Component: 3600 - total flux cleaned = 0.00151092 Jy ! Component: 3650 - total flux cleaned = 0.00148144 Jy ! Component: 3700 - total flux cleaned = 0.00148152 Jy ! Component: 3750 - total flux cleaned = 0.00150093 Jy ! Component: 3800 - total flux cleaned = 0.00148154 Jy ! Component: 3850 - total flux cleaned = 0.00146237 Jy ! Component: 3900 - total flux cleaned = 0.00147193 Jy ! Component: 3950 - total flux cleaned = 0.00148146 Jy ! Component: 4000 - total flux cleaned = 0.00142485 Jy ! Component: 4050 - total flux cleaned = 0.00147175 Jy ! Total flux subtracted in 4096 components = 0.00145324 Jy ! Clean residual min=-0.000507 max=0.000679 Jy/beam ! Clean residual mean=0.000004 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.47925 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 582 components and 0.47925 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1146+5356_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9848 x 1.26 at 12.21 degrees (North through East) ! Clean map min=-0.00088578 max=0.36469 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1146+5356_X_map.fits wmodel /vlbi/uf001/uva//J1146+5356_X_map.mod ! Writing 582 model components to file: /vlbi/uf001/uva//J1146+5356_X_map.mod wobs /vlbi/uf001/uva//J1146+5356_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1146+5356_X_uvs.fits wwins /vlbi/uf001/uva//J1146+5356_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J1146+5356_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.364685 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.131543 0.131543 0.263087 0.526173 1.05235 2.10469 4.20939 8.41877 16.8375 33.6751 67.3502 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.364 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2280.62 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1146+5356_X_dfm.log closed on Mon Jan 14 01:28:01 2019