! Started logfile: /vlbi/uf001/uva//J1145-2250_S_dfm.log on Mon Jan 14 01:27:17 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1145-2250_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1145-2250_S_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.871648 visibilities/baseline/integration-bin.
! Found source: J1145-2250
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1145-2250_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.138226Jy  sigma=16.352011
! Fit after  self-cal, rms=0.467689Jy  sigma=6.532024
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=11.5 mas, bpa=20.91 degrees
! Estimated noise=1.0096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.411249 Jy
! Component: 100  -  total flux cleaned = 0.521277 Jy
! Total flux subtracted in 100 components = 0.521277 Jy
! Clean residual min=-0.027457 max=0.050903 Jy/beam
! Clean residual mean=0.000165 rms=0.009475 Jy/beam
! Combined flux in latest and established models = 0.521277 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.521277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157135Jy  sigma=2.214346
! Fit after  self-cal, rms=0.157106Jy  sigma=2.213969
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=12.56 mas, bpa=19.33 degrees
! Estimated noise=0.740736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.079341 Jy
! Component: 100  -  total flux cleaned = 0.122381 Jy
! Component: 150  -  total flux cleaned = 0.150958 Jy
! Component: 200  -  total flux cleaned = 0.170527 Jy
! Total flux subtracted in 200 components = 0.170527 Jy
! Clean residual min=-0.018336 max=0.025814 Jy/beam
! Clean residual mean=-0.000007 rms=0.005992 Jy/beam
! Combined flux in latest and established models = 0.691804 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 52 components and 0.691804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112259Jy  sigma=1.477389
! Fit after  self-cal, rms=0.112223Jy  sigma=1.476585
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.654 x 12.56 at 19.33 degrees (North through East)
! Clean map  min=-0.017722  max=0.55064 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.12     KP        0.99     
!   LA        0.93     NL        1.02     OV        0.97     PT        1.00*    
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.14     KP        0.98     
!   LA        0.94     NL        1.03     OV        0.97     PT        1.00*    
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.94     HN        1.15     KP        1.00     
!   LA        0.94     NL        1.03     OV        0.96     PT        1.00*    
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.112223Jy  sigma=1.476585
! Fit after  self-cal, rms=0.103225Jy  sigma=1.306025
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.672 mas, bmaj=12.86 mas, bpa=19.7 degrees
! Estimated noise=0.733856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0117009 Jy
! Component: 100  -  total flux cleaned = -0.0130052 Jy
! Component: 150  -  total flux cleaned = -0.0146764 Jy
! Component: 200  -  total flux cleaned = -0.0159072 Jy
! Total flux subtracted in 200 components = -0.0159072 Jy
! Clean residual min=-0.015906 max=0.016041 Jy/beam
! Clean residual mean=-0.000000 rms=0.004061 Jy/beam
! Combined flux in latest and established models = 0.675896 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 76 components and 0.675896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101038Jy  sigma=1.277398
! Fit after  self-cal, rms=0.101115Jy  sigma=1.277183
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101115Jy  sigma=1.277183
! Fit after  self-cal, rms=0.088710Jy  sigma=1.099505
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.667 mas, bmaj=12.76 mas, bpa=19.32 degrees
! Estimated noise=0.733451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00725181 Jy
! Component: 100  -  total flux cleaned = -0.00835235 Jy
! Component: 150  -  total flux cleaned = -0.00821122 Jy
! Component: 200  -  total flux cleaned = -0.00821348 Jy
! Total flux subtracted in 200 components = -0.00821348 Jy
! Clean residual min=-0.005684 max=0.005529 Jy/beam
! Clean residual mean=0.000007 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.667683 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.667683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088101Jy  sigma=1.087298
! Fit after  self-cal, rms=0.088209Jy  sigma=1.087115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131561 Jy
! Component: 100  -  total flux cleaned = -0.000306175 Jy
! Component: 150  -  total flux cleaned = -0.000467636 Jy
! Component: 200  -  total flux cleaned = -0.000687963 Jy
! Total flux subtracted in 200 components = -0.000687963 Jy
! Clean residual min=-0.005265 max=0.005266 Jy/beam
! Clean residual mean=0.000007 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.666995 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.666995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088114Jy  sigma=1.084284
! Fit after  self-cal, rms=0.088110Jy  sigma=1.084261
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088110Jy  sigma=1.084261
! Fit after  self-cal, rms=0.089279Jy  sigma=1.079369
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.662 mas, bmaj=12.77 mas, bpa=19.35 degrees
! Estimated noise=0.732392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00299923 Jy
! Component: 100  -  total flux cleaned = -0.00332438 Jy
! Component: 150  -  total flux cleaned = -0.00379027 Jy
! Component: 200  -  total flux cleaned = -0.00411878 Jy
! Total flux subtracted in 200 components = -0.00411878 Jy
! Clean residual min=-0.004520 max=0.004453 Jy/beam
! Clean residual mean=0.000005 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.662876 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.662876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089017Jy  sigma=1.075226
! Fit after  self-cal, rms=0.089037Jy  sigma=1.075208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324809 Jy
! Component: 100  -  total flux cleaned = -0.000602223 Jy
! Component: 150  -  total flux cleaned = -0.000860948 Jy
! Component: 200  -  total flux cleaned = -0.00110305 Jy
! Total flux subtracted in 200 components = -0.00110305 Jy
! Clean residual min=-0.004386 max=0.004297 Jy/beam
! Clean residual mean=0.000005 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.661773 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.661773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088951Jy  sigma=1.073682
! Fit after  self-cal, rms=0.088949Jy  sigma=1.073672
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088949Jy  sigma=1.073672
! Fit after  self-cal, rms=0.089368Jy  sigma=1.072661
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.258 mas, bmaj=17.5 mas, bpa=10.83 degrees
! Estimated noise=0.872727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00271103 Jy
! Component: 100  -  total flux cleaned = -0.00372636 Jy
! Component: 150  -  total flux cleaned = -0.00396765 Jy
! Component: 200  -  total flux cleaned = -0.00415939 Jy
! Total flux subtracted in 200 components = -0.00415939 Jy
! Clean residual min=-0.004207 max=0.003816 Jy/beam
! Clean residual mean=0.000009 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.657614 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 115 components and 0.657614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089302Jy  sigma=1.071666
! Fit after  self-cal, rms=0.089304Jy  sigma=1.071629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.56598e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108411 Jy
! Component: 150  -  total flux cleaned = -0.000151595 Jy
! Component: 200  -  total flux cleaned = -0.000170867 Jy
! Total flux subtracted in 200 components = -0.000170867 Jy
! Clean residual min=-0.004172 max=0.003806 Jy/beam
! Clean residual mean=0.000009 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.657443 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 121 components and 0.657443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089294Jy  sigma=1.071450
! Fit after  self-cal, rms=0.089293Jy  sigma=1.071430
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.658 mas, bmaj=12.78 mas, bpa=19.41 degrees
! Estimated noise=0.731701 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.658 x 12.78 at 19.41 degrees (North through East)
! Clean map  min=-0.0043861  max=0.54899 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089293Jy  sigma=1.071430
! Fit after  self-cal, rms=0.084564Jy  sigma=0.977523
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=12.8 mas, bpa=19.46 degrees
! Estimated noise=0.731798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144713 Jy
! Component: 100  -  total flux cleaned = -0.00177054 Jy
! Component: 150  -  total flux cleaned = -0.00204648 Jy
! Component: 200  -  total flux cleaned = -0.00224658 Jy
! Total flux subtracted in 200 components = -0.00224658 Jy
! Clean residual min=-0.004196 max=0.003784 Jy/beam
! Clean residual mean=0.000006 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.655196 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 0.655196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084479Jy  sigma=0.976076
! Fit after  self-cal, rms=0.084477Jy  sigma=0.976063
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146042 Jy
! Component: 100  -  total flux cleaned = -0.000407721 Jy
! Component: 150  -  total flux cleaned = -0.000566362 Jy
! Component: 200  -  total flux cleaned = -0.000716063 Jy
! Total flux subtracted in 200 components = -0.000716063 Jy
! Clean residual min=-0.004147 max=0.003730 Jy/beam
! Clean residual mean=0.000006 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.65448 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 126 components and 0.65448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084440Jy  sigma=0.975397
! Fit after  self-cal, rms=0.084441Jy  sigma=0.975389
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084441Jy  sigma=0.975389
! Fit after  self-cal, rms=0.084634Jy  sigma=0.975123
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=11.68 mas, bpa=20.88 degrees
! Estimated noise=1.01184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.412057 Jy
! Component: 100  -  total flux cleaned = 0.523596 Jy
! Component: 150  -  total flux cleaned = 0.581877 Jy
! Component: 200  -  total flux cleaned = 0.613425 Jy
! Total flux subtracted in 200 components = 0.613425 Jy
! Clean residual min=-0.008924 max=0.015108 Jy/beam
! Clean residual mean=0.000047 rms=0.002586 Jy/beam
! Combined flux in latest and established models = 0.613425 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.613425 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=12.8 mas, bpa=19.48 degrees
! Estimated noise=0.731334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201566 Jy
! Component: 100  -  total flux cleaned = 0.0295764 Jy
! Component: 150  -  total flux cleaned = 0.034369 Jy
! Component: 200  -  total flux cleaned = 0.0358032 Jy
! Total flux subtracted in 200 components = 0.0358032 Jy
! Clean residual min=-0.003935 max=0.004244 Jy/beam
! Clean residual mean=0.000007 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.649228 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.649228 Jy
! Inverting map 
! Added new window around map position (25, -68).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881069 Jy
! Component: 100  -  total flux cleaned = 0.000535977 Jy
! Component: 150  -  total flux cleaned = 0.00095844 Jy
! Component: 200  -  total flux cleaned = 0.00132251 Jy
! Total flux subtracted in 200 components = 0.00132251 Jy
! Clean residual min=-0.003527 max=0.003288 Jy/beam
! Clean residual mean=0.000007 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.650551 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 60 components and 0.650551 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.271 mas, bmaj=17.53 mas, bpa=10.87 degrees
! Estimated noise=0.871995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174002 Jy
! Component: 100  -  total flux cleaned = 0.000668774 Jy
! Component: 150  -  total flux cleaned = 0.000788868 Jy
! Component: 200  -  total flux cleaned = 0.000763618 Jy
! Total flux subtracted in 200 components = 0.000763618 Jy
! Clean residual min=-0.003414 max=0.003135 Jy/beam
! Clean residual mean=0.000009 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.651314 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.18371e-05 Jy
! Component: 100  -  total flux cleaned = -4.14837e-05 Jy
! Component: 150  -  total flux cleaned = -5.93468e-05 Jy
! Component: 200  -  total flux cleaned = -5.96249e-05 Jy
! Total flux subtracted in 200 components = -5.96249e-05 Jy
! Clean residual min=-0.003450 max=0.003230 Jy/beam
! Clean residual mean=0.000009 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.651255 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.651255 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=12.8 mas, bpa=19.48 degrees
! Estimated noise=0.731334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349703 Jy
! Component: 100  -  total flux cleaned = -0.000293275 Jy
! Component: 150  -  total flux cleaned = -0.000140129 Jy
! Component: 200  -  total flux cleaned = -1.36113e-06 Jy
! Total flux subtracted in 200 components = -1.36113e-06 Jy
! Clean residual min=-0.003327 max=0.003316 Jy/beam
! Clean residual mean=0.000005 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.651253 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.651253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084413Jy  sigma=0.971718
! Fit after  self-cal, rms=0.084374Jy  sigma=0.971357
wmodel J1145-2250_S_map.mod
! Writing 105 model components to file: J1145-2250_S_map.mod
wobs   J1145-2250_S_uvs.fits
! Writing UV FITS file: J1145-2250_S_uvs.fits
wwins  J1145-2250_S_map.win
! wwins: Wrote 2 windows to J1145-2250_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000318141 Jy
! Component: 100  -  total flux cleaned = -2.53434e-05 Jy
! Component: 150  -  total flux cleaned = 0.000200628 Jy
! Component: 200  -  total flux cleaned = 0.000240597 Jy
! Component: 250  -  total flux cleaned = 0.000482213 Jy
! Component: 300  -  total flux cleaned = 0.000910548 Jy
! Component: 350  -  total flux cleaned = 0.00128772 Jy
! Component: 400  -  total flux cleaned = 0.00165325 Jy
! Component: 450  -  total flux cleaned = 0.0020427 Jy
! Component: 500  -  total flux cleaned = 0.00228398 Jy
! Component: 550  -  total flux cleaned = 0.0025858 Jy
! Component: 600  -  total flux cleaned = 0.0029445 Jy
! Component: 650  -  total flux cleaned = 0.00307097 Jy
! Component: 700  -  total flux cleaned = 0.00341268 Jy
! Component: 750  -  total flux cleaned = 0.00356441 Jy
! Component: 800  -  total flux cleaned = 0.00383157 Jy
! Component: 850  -  total flux cleaned = 0.00412117 Jy
! Component: 900  -  total flux cleaned = 0.00431937 Jy
! Component: 950  -  total flux cleaned = 0.0045977 Jy
! Component: 1000  -  total flux cleaned = 0.00473425 Jy
! Component: 1050  -  total flux cleaned = 0.00500088 Jy
! Component: 1100  -  total flux cleaned = 0.0052357 Jy
! Component: 1150  -  total flux cleaned = 0.00541404 Jy
! Component: 1200  -  total flux cleaned = 0.00553906 Jy
! Component: 1250  -  total flux cleaned = 0.00568663 Jy
! Component: 1300  -  total flux cleaned = 0.00583231 Jy
! Component: 1350  -  total flux cleaned = 0.00607001 Jy
! Component: 1400  -  total flux cleaned = 0.00625762 Jy
! Component: 1450  -  total flux cleaned = 0.00641914 Jy
! Component: 1500  -  total flux cleaned = 0.00669109 Jy
! Component: 1550  -  total flux cleaned = 0.00680273 Jy
! Component: 1600  -  total flux cleaned = 0.0069787 Jy
! Component: 1650  -  total flux cleaned = 0.00715193 Jy
! Component: 1700  -  total flux cleaned = 0.00730101 Jy
! Component: 1750  -  total flux cleaned = 0.00748928 Jy
! Component: 1800  -  total flux cleaned = 0.00759242 Jy
! Component: 1850  -  total flux cleaned = 0.00777548 Jy
! Component: 1900  -  total flux cleaned = 0.00791581 Jy
! Component: 1950  -  total flux cleaned = 0.00801457 Jy
! Component: 2000  -  total flux cleaned = 0.00817028 Jy
! Component: 2050  -  total flux cleaned = 0.00822748 Jy
! Component: 2100  -  total flux cleaned = 0.00834127 Jy
! Component: 2150  -  total flux cleaned = 0.00841619 Jy
! Component: 2200  -  total flux cleaned = 0.00849034 Jy
! Component: 2250  -  total flux cleaned = 0.00863645 Jy
! Component: 2300  -  total flux cleaned = 0.0086906 Jy
! Component: 2350  -  total flux cleaned = 0.00879767 Jy
! Component: 2400  -  total flux cleaned = 0.00890336 Jy
! Component: 2450  -  total flux cleaned = 0.00902517 Jy
! Component: 2500  -  total flux cleaned = 0.00911108 Jy
! Component: 2550  -  total flux cleaned = 0.00919608 Jy
! Component: 2600  -  total flux cleaned = 0.00924634 Jy
! Component: 2650  -  total flux cleaned = 0.00927953 Jy
! Component: 2700  -  total flux cleaned = 0.00932915 Jy
! Component: 2750  -  total flux cleaned = 0.00934546 Jy
! Component: 2800  -  total flux cleaned = 0.00944237 Jy
! Component: 2850  -  total flux cleaned = 0.00949008 Jy
! Component: 2900  -  total flux cleaned = 0.0095376 Jy
! Component: 2950  -  total flux cleaned = 0.00956903 Jy
! Component: 3000  -  total flux cleaned = 0.00966179 Jy
! Component: 3050  -  total flux cleaned = 0.00972291 Jy
! Component: 3100  -  total flux cleaned = 0.00979864 Jy
! Component: 3150  -  total flux cleaned = 0.00982844 Jy
! Component: 3200  -  total flux cleaned = 0.00985841 Jy
! Component: 3250  -  total flux cleaned = 0.00990263 Jy
! Component: 3300  -  total flux cleaned = 0.00997574 Jy
! Component: 3350  -  total flux cleaned = 0.0100191 Jy
! Component: 3400  -  total flux cleaned = 0.0100766 Jy
! Component: 3450  -  total flux cleaned = 0.0101193 Jy
! Component: 3500  -  total flux cleaned = 0.0102179 Jy
! Component: 3550  -  total flux cleaned = 0.0102039 Jy
! Component: 3600  -  total flux cleaned = 0.0103008 Jy
! Component: 3650  -  total flux cleaned = 0.0102871 Jy
! Component: 3700  -  total flux cleaned = 0.0103282 Jy
! Component: 3750  -  total flux cleaned = 0.0103958 Jy
! Component: 3800  -  total flux cleaned = 0.0104092 Jy
! Component: 3850  -  total flux cleaned = 0.0104626 Jy
! Component: 3900  -  total flux cleaned = 0.0105286 Jy
! Component: 3950  -  total flux cleaned = 0.0105548 Jy
! Component: 4000  -  total flux cleaned = 0.0106068 Jy
! Component: 4050  -  total flux cleaned = 0.0106326 Jy
! Total flux subtracted in 4096 components = 0.0106326 Jy
! Clean residual min=-0.000847 max=0.000807 Jy/beam
! Clean residual mean=0.000003 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.661886 Jy
keep
! Adding 257 model components to the UV plane model.
! The established model now contains 362 components and 0.661886 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1145-2250_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.654 x 12.8 at 19.48 degrees (North through East)
! Clean map  min=-0.0018821  max=0.55159 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1145-2250_S_map.fits
wmodel /vlbi/uf001/uva//J1145-2250_S_map.mod
! Writing 362 model components to file: /vlbi/uf001/uva//J1145-2250_S_map.mod
wobs   /vlbi/uf001/uva//J1145-2250_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1145-2250_S_uvs.fits
wwins  /vlbi/uf001/uva//J1145-2250_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1145-2250_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.551589 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000234866 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.12774 0.12774 0.25548 0.510959 1.02192 2.04384 4.08767 8.17535 16.3507 32.7014 65.4028
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.551 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2348.52 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1145-2250_S_dfm.log closed on Mon Jan 14 01:27:22 2019