! Started logfile: /vlbi/uf001/uvm//J1141+0022_S_a_dfm.log on Sun Jan 13 21:29:47 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1141+0022_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1141+0022_S_a_uvm.fits
! AN table 1: 88 integrations on 36 of 36 possible baselines.
! AN table 2: 148 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.947894 visibilities/baseline/integration-bin.
! Found source: J1141+0022
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 20793 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1141+0022_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 32 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 32 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 32 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.015406Jy  sigma=19.475909
! Fit after  self-cal, rms=0.838429Jy  sigma=16.218931
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.935 mas, bmaj=13.81 mas, bpa=-18.93 degrees
! Estimated noise=0.473525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124258 Jy
! Component: 100  -  total flux cleaned = 0.151835 Jy
! Total flux subtracted in 100 components = 0.151835 Jy
! Clean residual min=-0.005802 max=0.009476 Jy/beam
! Clean residual mean=0.000005 rms=0.001899 Jy/beam
! Combined flux in latest and established models = 0.151835 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.151835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091616Jy  sigma=1.399312
! Fit after  self-cal, rms=0.091573Jy  sigma=1.398415
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.355 mas, bmaj=13.84 mas, bpa=-18.2 degrees
! Estimated noise=0.263695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154427 Jy
! Component: 100  -  total flux cleaned = 0.0250822 Jy
! Component: 150  -  total flux cleaned = 0.0318546 Jy
! Component: 200  -  total flux cleaned = 0.0366738 Jy
! Total flux subtracted in 200 components = 0.0366738 Jy
! Clean residual min=-0.004709 max=0.007433 Jy/beam
! Clean residual mean=0.000004 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.188509 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 51 components and 0.188509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088603Jy  sigma=1.324844
! Fit after  self-cal, rms=0.088593Jy  sigma=1.324086
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.355 x 13.84 at -18.2 degrees (North through East)
! Clean map  min=-0.0044912  max=0.16323 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        1.06     KP        1.03     
!   LA        0.92     MK        1.05     NL        1.09     OV        1.02     
!   PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.21     FD        0.89     HN        1.02     KP        0.95     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.91     HN        1.05     KP        1.02     
!   LA        0.92     MK        1.08     NL        1.10     OV        1.04     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.59     FD        0.95     HN        1.01     KP        0.97     
!   LA        0.97     MK        0.99     NL        0.93     OV        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.75     HN        1.07     KP        1.06     
!   LA        0.91     MK        1.07     NL        1.07     OV        1.01     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.28     FD        0.97     HN        1.00     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.99     
! 
! 
! Fit before self-cal, rms=0.088593Jy  sigma=1.324086
! Fit after  self-cal, rms=0.093885Jy  sigma=1.278842
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=14.3 mas, bpa=-18.14 degrees
! Estimated noise=0.264706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117301 Jy
! Component: 100  -  total flux cleaned = -0.00166108 Jy
! Component: 150  -  total flux cleaned = -0.00179966 Jy
! Component: 200  -  total flux cleaned = -0.0019734 Jy
! Total flux subtracted in 200 components = -0.0019734 Jy
! Clean residual min=-0.004134 max=0.004851 Jy/beam
! Clean residual mean=-0.000004 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.186536 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.186536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093529Jy  sigma=1.278124
! Fit after  self-cal, rms=0.093599Jy  sigma=1.277667
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093599Jy  sigma=1.277667
! Fit after  self-cal, rms=0.082405Jy  sigma=1.221873
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.377 mas, bmaj=14.39 mas, bpa=-18.17 degrees
! Estimated noise=0.263411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000826279 Jy
! Component: 100  -  total flux cleaned = 0.000877391 Jy
! Component: 150  -  total flux cleaned = 0.000843002 Jy
! Component: 200  -  total flux cleaned = 0.000810046 Jy
! Total flux subtracted in 200 components = 0.000810046 Jy
! Clean residual min=-0.002120 max=0.001367 Jy/beam
! Clean residual mean=-0.000004 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.187346 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 0.187346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082362Jy  sigma=1.220827
! Fit after  self-cal, rms=0.082412Jy  sigma=1.220310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107207 Jy
! Component: 100  -  total flux cleaned = 0.000107006 Jy
! Component: 150  -  total flux cleaned = 0.000131788 Jy
! Component: 200  -  total flux cleaned = 0.000131157 Jy
! Total flux subtracted in 200 components = 0.000131157 Jy
! Clean residual min=-0.001953 max=0.001287 Jy/beam
! Clean residual mean=-0.000004 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.187477 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.187477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082393Jy  sigma=1.219955
! Fit after  self-cal, rms=0.082393Jy  sigma=1.219933
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082393Jy  sigma=1.219933
! Fit after  self-cal, rms=0.082891Jy  sigma=1.219724
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.381 mas, bmaj=14.41 mas, bpa=-18.15 degrees
! Estimated noise=0.263466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.06642e-05 Jy
! Component: 100  -  total flux cleaned = -0.000220957 Jy
! Component: 150  -  total flux cleaned = -0.000222575 Jy
! Component: 200  -  total flux cleaned = -0.000200593 Jy
! Total flux subtracted in 200 components = -0.000200593 Jy
! Clean residual min=-0.001773 max=0.001159 Jy/beam
! Clean residual mean=-0.000004 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.187276 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.187276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082873Jy  sigma=1.219344
! Fit after  self-cal, rms=0.082872Jy  sigma=1.219324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.13647e-05 Jy
! Component: 100  -  total flux cleaned = 9.18733e-05 Jy
! Component: 150  -  total flux cleaned = 9.15585e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109569 Jy
! Total flux subtracted in 200 components = 0.000109569 Jy
! Clean residual min=-0.001638 max=0.001153 Jy/beam
! Clean residual mean=-0.000004 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.187386 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.187386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082862Jy  sigma=1.219127
! Fit after  self-cal, rms=0.082862Jy  sigma=1.219112
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082862Jy  sigma=1.219112
! Fit after  self-cal, rms=0.083151Jy  sigma=1.219026
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.299 mas, bmaj=14.62 mas, bpa=-12.99 degrees
! Estimated noise=0.322433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.76058e-06 Jy
! Component: 100  -  total flux cleaned = -9.96799e-05 Jy
! Component: 150  -  total flux cleaned = -9.97329e-05 Jy
! Component: 200  -  total flux cleaned = -6.8836e-05 Jy
! Total flux subtracted in 200 components = -6.8836e-05 Jy
! Clean residual min=-0.001492 max=0.001146 Jy/beam
! Clean residual mean=-0.000009 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.187317 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.187317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083148Jy  sigma=1.218973
! Fit after  self-cal, rms=0.083149Jy  sigma=1.218964
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.37754e-05 Jy
! Component: 100  -  total flux cleaned = 9.27774e-05 Jy
! Component: 150  -  total flux cleaned = 0.00010135 Jy
! Component: 200  -  total flux cleaned = 0.000109587 Jy
! Total flux subtracted in 200 components = 0.000109587 Jy
! Clean residual min=-0.001476 max=0.001144 Jy/beam
! Clean residual mean=-0.000009 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.187427 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 124 components and 0.187427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083147Jy  sigma=1.218961
! Fit after  self-cal, rms=0.083148Jy  sigma=1.218956
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=14.43 mas, bpa=-18.14 degrees
! Estimated noise=0.263437 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.384 x 14.43 at -18.14 degrees (North through East)
! Clean map  min=-0.0015375  max=0.16226 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=14.16 mas, bpa=-18.87 degrees
! Estimated noise=0.480461 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125993 Jy
! Component: 100  -  total flux cleaned = 0.15356 Jy
! Component: 150  -  total flux cleaned = 0.163175 Jy
! Component: 200  -  total flux cleaned = 0.169178 Jy
! Total flux subtracted in 200 components = 0.169178 Jy
! Clean residual min=-0.002470 max=0.003327 Jy/beam
! Clean residual mean=-0.000003 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.169178 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.169178 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=14.43 mas, bpa=-18.14 degrees
! Estimated noise=0.263437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055009 Jy
! Component: 100  -  total flux cleaned = 0.00919415 Jy
! Component: 150  -  total flux cleaned = 0.0118322 Jy
! Component: 200  -  total flux cleaned = 0.013775 Jy
! Total flux subtracted in 200 components = 0.013775 Jy
! Clean residual min=-0.001567 max=0.001443 Jy/beam
! Clean residual mean=-0.000004 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.182953 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 95 components and 0.182953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.299 mas, bmaj=14.62 mas, bpa=-12.99 degrees
! Estimated noise=0.322433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213542 Jy
! Component: 100  -  total flux cleaned = 0.00341241 Jy
! Component: 150  -  total flux cleaned = 0.00423018 Jy
! Component: 200  -  total flux cleaned = 0.00476293 Jy
! Total flux subtracted in 200 components = 0.00476293 Jy
! Clean residual min=-0.001450 max=0.001178 Jy/beam
! Clean residual mean=-0.000008 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.187716 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182823 Jy
! Component: 100  -  total flux cleaned = 0.000292141 Jy
! Component: 150  -  total flux cleaned = 0.000344806 Jy
! Component: 200  -  total flux cleaned = 0.000393405 Jy
! Total flux subtracted in 200 components = 0.000393405 Jy
! Clean residual min=-0.001418 max=0.001178 Jy/beam
! Clean residual mean=-0.000008 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.18811 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 135 components and 0.18811 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=14.43 mas, bpa=-18.14 degrees
! Estimated noise=0.263437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.83664e-05 Jy
! Component: 100  -  total flux cleaned = 4.86621e-05 Jy
! Component: 150  -  total flux cleaned = 6.66116e-05 Jy
! Component: 200  -  total flux cleaned = 6.63944e-05 Jy
! Total flux subtracted in 200 components = 6.63944e-05 Jy
! Clean residual min=-0.001341 max=0.001081 Jy/beam
! Clean residual mean=-0.000004 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.188176 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 157 components and 0.188176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083137Jy  sigma=1.218777
! Fit after  self-cal, rms=0.083127Jy  sigma=1.218678
wmodel J1141+0022_S_a_map.mod
! Writing 157 model components to file: J1141+0022_S_a_map.mod
wobs   J1141+0022_S_a_uvs.fits
! Writing UV FITS file: J1141+0022_S_a_uvs.fits
wwins  J1141+0022_S_a_map.win
! wwins: Wrote 1 windows to J1141+0022_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000523303 Jy
! Component: 100  -  total flux cleaned = -0.000765741 Jy
! Component: 150  -  total flux cleaned = -0.000859788 Jy
! Component: 200  -  total flux cleaned = -0.000950146 Jy
! Component: 250  -  total flux cleaned = -0.000985157 Jy
! Component: 300  -  total flux cleaned = -0.00106916 Jy
! Component: 350  -  total flux cleaned = -0.00103667 Jy
! Component: 400  -  total flux cleaned = -0.00105285 Jy
! Component: 450  -  total flux cleaned = -0.00106852 Jy
! Component: 500  -  total flux cleaned = -0.00112919 Jy
! Component: 550  -  total flux cleaned = -0.00117378 Jy
! Component: 600  -  total flux cleaned = -0.00121749 Jy
! Component: 650  -  total flux cleaned = -0.00123179 Jy
! Component: 700  -  total flux cleaned = -0.0012179 Jy
! Component: 750  -  total flux cleaned = -0.0012456 Jy
! Component: 800  -  total flux cleaned = -0.00124562 Jy
! Component: 850  -  total flux cleaned = -0.00124584 Jy
! Component: 900  -  total flux cleaned = -0.0012458 Jy
! Component: 950  -  total flux cleaned = -0.00133723 Jy
! Component: 1000  -  total flux cleaned = -0.00134991 Jy
! Component: 1050  -  total flux cleaned = -0.00137523 Jy
! Component: 1100  -  total flux cleaned = -0.00145043 Jy
! Component: 1150  -  total flux cleaned = -0.00145049 Jy
! Component: 1200  -  total flux cleaned = -0.00151163 Jy
! Component: 1250  -  total flux cleaned = -0.00152361 Jy
! Component: 1300  -  total flux cleaned = -0.00157117 Jy
! Component: 1350  -  total flux cleaned = -0.00157114 Jy
! Component: 1400  -  total flux cleaned = -0.00154809 Jy
! Component: 1450  -  total flux cleaned = -0.00159429 Jy
! Component: 1500  -  total flux cleaned = -0.00162847 Jy
! Component: 1550  -  total flux cleaned = -0.00165116 Jy
! Component: 1600  -  total flux cleaned = -0.0016733 Jy
! Component: 1650  -  total flux cleaned = -0.0016953 Jy
! Component: 1700  -  total flux cleaned = -0.00172804 Jy
! Component: 1750  -  total flux cleaned = -0.00173891 Jy
! Component: 1800  -  total flux cleaned = -0.00177108 Jy
! Component: 1850  -  total flux cleaned = -0.00180267 Jy
! Component: 1900  -  total flux cleaned = -0.00182378 Jy
! Component: 1950  -  total flux cleaned = -0.00182386 Jy
! Component: 2000  -  total flux cleaned = -0.00188535 Jy
! Component: 2050  -  total flux cleaned = -0.00190571 Jy
! Component: 2100  -  total flux cleaned = -0.00191557 Jy
! Component: 2150  -  total flux cleaned = -0.00189569 Jy
! Component: 2200  -  total flux cleaned = -0.00191543 Jy
! Component: 2250  -  total flux cleaned = -0.00190562 Jy
! Component: 2300  -  total flux cleaned = -0.00189594 Jy
! Component: 2350  -  total flux cleaned = -0.00188635 Jy
! Component: 2400  -  total flux cleaned = -0.00185794 Jy
! Component: 2450  -  total flux cleaned = -0.00185786 Jy
! Component: 2500  -  total flux cleaned = -0.00187669 Jy
! Component: 2550  -  total flux cleaned = -0.00192301 Jy
! Component: 2600  -  total flux cleaned = -0.00187709 Jy
! Component: 2650  -  total flux cleaned = -0.00189537 Jy
! Component: 2700  -  total flux cleaned = -0.00189529 Jy
! Component: 2750  -  total flux cleaned = -0.00190431 Jy
! Component: 2800  -  total flux cleaned = -0.00192219 Jy
! Component: 2850  -  total flux cleaned = -0.00196635 Jy
! Component: 2900  -  total flux cleaned = -0.00194878 Jy
! Component: 2950  -  total flux cleaned = -0.00194882 Jy
! Component: 3000  -  total flux cleaned = -0.00199188 Jy
! Component: 3050  -  total flux cleaned = -0.00199184 Jy
! Component: 3100  -  total flux cleaned = -0.00199177 Jy
! Component: 3150  -  total flux cleaned = -0.00201704 Jy
! Component: 3200  -  total flux cleaned = -0.00201701 Jy
! Component: 3250  -  total flux cleaned = -0.00200881 Jy
! Component: 3300  -  total flux cleaned = -0.00206658 Jy
! Component: 3350  -  total flux cleaned = -0.00205844 Jy
! Component: 3400  -  total flux cleaned = -0.00210731 Jy
! Component: 3450  -  total flux cleaned = -0.00213964 Jy
! Component: 3500  -  total flux cleaned = -0.00216379 Jy
! Component: 3550  -  total flux cleaned = -0.00221945 Jy
! Component: 3600  -  total flux cleaned = -0.00223523 Jy
! Component: 3650  -  total flux cleaned = -0.00226667 Jy
! Component: 3700  -  total flux cleaned = -0.00230564 Jy
! Component: 3750  -  total flux cleaned = -0.00232892 Jy
! Component: 3800  -  total flux cleaned = -0.00237519 Jy
! Component: 3850  -  total flux cleaned = -0.00240579 Jy
! Component: 3900  -  total flux cleaned = -0.00241349 Jy
! Component: 3950  -  total flux cleaned = -0.00244374 Jy
! Component: 4000  -  total flux cleaned = -0.00245882 Jy
! Component: 4050  -  total flux cleaned = -0.00251117 Jy
! Total flux subtracted in 4096 components = -0.00254834 Jy
! Clean residual min=-0.000468 max=0.000376 Jy/beam
! Clean residual mean=-0.000002 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.185628 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 465 components and 0.185628 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1141+0022_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.384 x 14.43 at -18.14 degrees (North through East)
! Clean map  min=-0.0010048  max=0.16223 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1141+0022_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1141+0022_S_a_map.mod
! Writing 465 model components to file: /vlbi/uf001/uvm//J1141+0022_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1141+0022_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1141+0022_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1141+0022_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1141+0022_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.162229 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000144698 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.26758 0.26758 0.535159 1.07032 2.14064 4.28128 8.56255 17.1251 34.2502 68.5004
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.162 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1121.16 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1141+0022_S_a_dfm.log closed on Sun Jan 13 21:29:52 2019