! Started logfile: /vlbi/uf001/uva//J1140+1203_S_b_dfm.log on Mon Jan 14 01:24:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1140+1203_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1140+1203_S_b_uva.fits ! AN table 1: 72 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J1140+1203 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5292 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1140+1203_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004781Jy sigma=21.283486 ! Fit after self-cal, rms=0.962032Jy sigma=20.479833 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=13.16 mas, bpa=-20.38 degrees ! Estimated noise=0.705952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293709 Jy ! Component: 100 - total flux cleaned = 0.0360387 Jy ! Total flux subtracted in 100 components = 0.0360387 Jy ! Clean residual min=-0.003527 max=0.003875 Jy/beam ! Clean residual mean=0.000003 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0360387 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0360387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074439Jy sigma=1.271610 ! Fit after self-cal, rms=0.072593Jy sigma=1.227458 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=13.62 mas, bpa=-19.98 degrees ! Estimated noise=0.470125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514888 Jy ! Component: 100 - total flux cleaned = 0.00588802 Jy ! Component: 150 - total flux cleaned = 0.00580868 Jy ! Component: 200 - total flux cleaned = 0.00569161 Jy ! Total flux subtracted in 200 components = 0.00569161 Jy ! Clean residual min=-0.003384 max=0.003210 Jy/beam ! Clean residual mean=0.000006 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0417304 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 0.0417304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071932Jy sigma=1.220320 ! Fit after self-cal, rms=0.071870Jy sigma=1.219835 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.412 x 13.62 at -19.98 degrees (North through East) ! Clean map min=-0.0033714 max=0.04156 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.02 HN 1.04 KP 1.01 ! LA 0.95 MK 1.00 NL 1.26 PT 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.47 FD 1.10 HN 0.96 KP 1.05 ! LA 0.92 MK 1.04 NL 0.57 PT 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.05 KP 1.08 ! LA 0.99 MK 1.05 NL 0.91 PT 1.12 ! ! ! Fit before self-cal, rms=0.071870Jy sigma=1.219835 ! Fit after self-cal, rms=0.059780Jy sigma=1.199441 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=13.31 mas, bpa=-20.16 degrees ! Estimated noise=0.465074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978644 Jy ! Component: 100 - total flux cleaned = 0.00108456 Jy ! Component: 150 - total flux cleaned = 0.00117066 Jy ! Component: 200 - total flux cleaned = 0.00117119 Jy ! Total flux subtracted in 200 components = 0.00117119 Jy ! Clean residual min=-0.001875 max=0.001802 Jy/beam ! Clean residual mean=0.000006 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0429015 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0429015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059730Jy sigma=1.198478 ! Fit after self-cal, rms=0.059934Jy sigma=1.192195 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059934Jy sigma=1.192195 ! Fit after self-cal, rms=0.060521Jy sigma=1.184491 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=13.32 mas, bpa=-20.11 degrees ! Estimated noise=0.467491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296282 Jy ! Component: 100 - total flux cleaned = 0.000268604 Jy ! Component: 150 - total flux cleaned = 0.000249838 Jy ! Component: 200 - total flux cleaned = 0.000263829 Jy ! Total flux subtracted in 200 components = 0.000263829 Jy ! Clean residual min=-0.001843 max=0.001640 Jy/beam ! Clean residual mean=0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0431654 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.0431654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060501Jy sigma=1.184109 ! Fit after self-cal, rms=0.060795Jy sigma=1.182127 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441913 Jy ! Component: 100 - total flux cleaned = -0.000472865 Jy ! Component: 150 - total flux cleaned = -0.000511027 Jy ! Component: 200 - total flux cleaned = -0.000521557 Jy ! Total flux subtracted in 200 components = -0.000521557 Jy ! Clean residual min=-0.001891 max=0.001671 Jy/beam ! Clean residual mean=0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0426438 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.0426438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060784Jy sigma=1.181971 ! Fit after self-cal, rms=0.060797Jy sigma=1.181909 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060797Jy sigma=1.181909 ! Fit after self-cal, rms=0.061796Jy sigma=1.181287 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=13.35 mas, bpa=-20.14 degrees ! Estimated noise=0.468954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30993e-05 Jy ! Component: 100 - total flux cleaned = -1.64026e-05 Jy ! Component: 150 - total flux cleaned = 1.70223e-05 Jy ! Component: 200 - total flux cleaned = 7.13783e-06 Jy ! Total flux subtracted in 200 components = 7.13783e-06 Jy ! Clean residual min=-0.001772 max=0.001628 Jy/beam ! Clean residual mean=0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0426509 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.042651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061787Jy sigma=1.181190 ! Fit after self-cal, rms=0.061893Jy sigma=1.180537 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129446 Jy ! Component: 100 - total flux cleaned = -0.00012788 Jy ! Component: 150 - total flux cleaned = -0.000116716 Jy ! Component: 200 - total flux cleaned = -0.000116454 Jy ! Total flux subtracted in 200 components = -0.000116454 Jy ! Clean residual min=-0.001802 max=0.001531 Jy/beam ! Clean residual mean=0.000004 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0425345 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.0425345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061885Jy sigma=1.180466 ! Fit after self-cal, rms=0.061889Jy sigma=1.180417 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061889Jy sigma=1.180417 ! Fit after self-cal, rms=0.062258Jy sigma=1.180311 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.301 mas, bmaj=14.4 mas, bpa=-19.32 degrees ! Estimated noise=0.567935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.92447e-05 Jy ! Component: 100 - total flux cleaned = 0.000135732 Jy ! Component: 150 - total flux cleaned = 0.000136209 Jy ! Component: 200 - total flux cleaned = 0.000127602 Jy ! Total flux subtracted in 200 components = 0.000127602 Jy ! Clean residual min=-0.002477 max=0.001935 Jy/beam ! Clean residual mean=0.000005 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0426621 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 117 components and 0.0426621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062252Jy sigma=1.180317 ! Fit after self-cal, rms=0.062288Jy sigma=1.180203 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.46807e-05 Jy ! Component: 100 - total flux cleaned = 2.71401e-05 Jy ! Component: 150 - total flux cleaned = 1.79945e-05 Jy ! Component: 200 - total flux cleaned = 3.21531e-06 Jy ! Total flux subtracted in 200 components = 3.21531e-06 Jy ! Clean residual min=-0.002499 max=0.001931 Jy/beam ! Clean residual mean=0.000005 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0426653 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 135 components and 0.0426653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062284Jy sigma=1.180193 ! Fit after self-cal, rms=0.062293Jy sigma=1.180151 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=13.38 mas, bpa=-20.17 degrees ! Estimated noise=0.469506 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 13.38 at -20.17 degrees (North through East) ! Clean map min=-0.0026566 max=0.041004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=12.8 mas, bpa=-20.54 degrees ! Estimated noise=0.724478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317991 Jy ! Component: 100 - total flux cleaned = 0.0392537 Jy ! Component: 150 - total flux cleaned = 0.0406281 Jy ! Component: 200 - total flux cleaned = 0.0409955 Jy ! Total flux subtracted in 200 components = 0.0409955 Jy ! Clean residual min=-0.002624 max=0.002614 Jy/beam ! Clean residual mean=0.000003 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0409955 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0409955 Jy ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=13.38 mas, bpa=-20.17 degrees ! Estimated noise=0.469506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292413 Jy ! Component: 100 - total flux cleaned = 0.00101247 Jy ! Component: 150 - total flux cleaned = 0.00126728 Jy ! Component: 200 - total flux cleaned = 0.00130817 Jy ! Total flux subtracted in 200 components = 0.00130817 Jy ! Clean residual min=-0.001795 max=0.001665 Jy/beam ! Clean residual mean=0.000004 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0423037 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.0423037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.301 mas, bmaj=14.4 mas, bpa=-19.32 degrees ! Estimated noise=0.567935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79471e-05 Jy ! Component: 100 - total flux cleaned = 0.000125693 Jy ! Component: 150 - total flux cleaned = 0.000175114 Jy ! Component: 200 - total flux cleaned = 0.000195348 Jy ! Total flux subtracted in 200 components = 0.000195348 Jy ! Clean residual min=-0.002552 max=0.001996 Jy/beam ! Clean residual mean=0.000006 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0424991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72868e-05 Jy ! Component: 100 - total flux cleaned = 4.58342e-05 Jy ! Component: 150 - total flux cleaned = 5.77247e-05 Jy ! Component: 200 - total flux cleaned = 5.78341e-05 Jy ! Total flux subtracted in 200 components = 5.78341e-05 Jy ! Clean residual min=-0.002558 max=0.001964 Jy/beam ! Clean residual mean=0.000006 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0425569 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 87 components and 0.0425569 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=13.38 mas, bpa=-20.17 degrees ! Estimated noise=0.469506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82474e-05 Jy ! Component: 100 - total flux cleaned = 4.50336e-05 Jy ! Component: 150 - total flux cleaned = -4.73336e-07 Jy ! Component: 200 - total flux cleaned = -4.14284e-05 Jy ! Total flux subtracted in 200 components = -4.14284e-05 Jy ! Clean residual min=-0.001848 max=0.001517 Jy/beam ! Clean residual mean=0.000004 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0425155 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.0425155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062301Jy sigma=1.180397 ! Fit after self-cal, rms=0.062311Jy sigma=1.180294 wmodel J1140+1203_S_b_map.mod ! Writing 95 model components to file: J1140+1203_S_b_map.mod wobs J1140+1203_S_b_uvs.fits ! Writing UV FITS file: J1140+1203_S_b_uvs.fits wwins J1140+1203_S_b_map.win ! wwins: Wrote 1 windows to J1140+1203_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000810337 Jy ! Component: 100 - total flux cleaned = -0.00124622 Jy ! Component: 150 - total flux cleaned = -0.00148944 Jy ! Component: 200 - total flux cleaned = -0.00174398 Jy ! Component: 250 - total flux cleaned = -0.00205793 Jy ! Component: 300 - total flux cleaned = -0.00217328 Jy ! Component: 350 - total flux cleaned = -0.00239491 Jy ! Component: 400 - total flux cleaned = -0.00258616 Jy ! Component: 450 - total flux cleaned = -0.00268883 Jy ! Component: 500 - total flux cleaned = -0.0027883 Jy ! Component: 550 - total flux cleaned = -0.00286595 Jy ! Component: 600 - total flux cleaned = -0.00297928 Jy ! Component: 650 - total flux cleaned = -0.00310743 Jy ! Component: 700 - total flux cleaned = -0.00314272 Jy ! Component: 750 - total flux cleaned = -0.00319483 Jy ! Component: 800 - total flux cleaned = -0.00322872 Jy ! Component: 850 - total flux cleaned = -0.00324524 Jy ! Component: 900 - total flux cleaned = -0.00329392 Jy ! Component: 950 - total flux cleaned = -0.00329398 Jy ! Component: 1000 - total flux cleaned = -0.00332521 Jy ! Component: 1050 - total flux cleaned = -0.00340082 Jy ! Component: 1100 - total flux cleaned = -0.00341561 Jy ! Component: 1150 - total flux cleaned = -0.00343009 Jy ! Component: 1200 - total flux cleaned = -0.00340169 Jy ! Component: 1250 - total flux cleaned = -0.00342974 Jy ! Component: 1300 - total flux cleaned = -0.00337505 Jy ! Component: 1350 - total flux cleaned = -0.00340222 Jy ! Component: 1400 - total flux cleaned = -0.00340259 Jy ! Component: 1450 - total flux cleaned = -0.00344161 Jy ! Component: 1500 - total flux cleaned = -0.00341616 Jy ! Component: 1550 - total flux cleaned = -0.00341638 Jy ! Component: 1600 - total flux cleaned = -0.00340411 Jy ! Component: 1650 - total flux cleaned = -0.00340426 Jy ! Component: 1700 - total flux cleaned = -0.00340429 Jy ! Component: 1750 - total flux cleaned = -0.00335701 Jy ! Component: 1800 - total flux cleaned = -0.00332229 Jy ! Component: 1850 - total flux cleaned = -0.00328785 Jy ! Component: 1900 - total flux cleaned = -0.00326521 Jy ! Component: 1950 - total flux cleaned = -0.00326521 Jy ! Component: 2000 - total flux cleaned = -0.00326504 Jy ! Component: 2050 - total flux cleaned = -0.00326502 Jy ! Component: 2100 - total flux cleaned = -0.00326512 Jy ! Component: 2150 - total flux cleaned = -0.00329729 Jy ! Component: 2200 - total flux cleaned = -0.00327624 Jy ! Component: 2250 - total flux cleaned = -0.00329712 Jy ! Component: 2300 - total flux cleaned = -0.00331768 Jy ! Component: 2350 - total flux cleaned = -0.00331777 Jy ! Component: 2400 - total flux cleaned = -0.00331764 Jy ! Component: 2450 - total flux cleaned = -0.00332779 Jy ! Component: 2500 - total flux cleaned = -0.00329796 Jy ! Component: 2550 - total flux cleaned = -0.00330793 Jy ! Component: 2600 - total flux cleaned = -0.00327875 Jy ! Component: 2650 - total flux cleaned = -0.00328852 Jy ! Component: 2700 - total flux cleaned = -0.00328848 Jy ! Component: 2750 - total flux cleaned = -0.00324106 Jy ! Component: 2800 - total flux cleaned = -0.00326932 Jy ! Component: 2850 - total flux cleaned = -0.0032319 Jy ! Component: 2900 - total flux cleaned = -0.00319476 Jy ! Component: 2950 - total flux cleaned = -0.00314881 Jy ! Component: 3000 - total flux cleaned = -0.00310315 Jy ! Component: 3050 - total flux cleaned = -0.00308505 Jy ! Component: 3100 - total flux cleaned = -0.00304004 Jy ! Component: 3150 - total flux cleaned = -0.00298637 Jy ! Component: 3200 - total flux cleaned = -0.00298635 Jy ! Component: 3250 - total flux cleaned = -0.00295987 Jy ! Component: 3300 - total flux cleaned = -0.00293354 Jy ! Component: 3350 - total flux cleaned = -0.00293359 Jy ! Component: 3400 - total flux cleaned = -0.00291616 Jy ! Component: 3450 - total flux cleaned = -0.00287294 Jy ! Component: 3500 - total flux cleaned = -0.00283848 Jy ! Component: 3550 - total flux cleaned = -0.00278714 Jy ! Component: 3600 - total flux cleaned = -0.00277864 Jy ! Component: 3650 - total flux cleaned = -0.00273627 Jy ! Component: 3700 - total flux cleaned = -0.00271095 Jy ! Component: 3750 - total flux cleaned = -0.00267733 Jy ! Component: 3800 - total flux cleaned = -0.00266895 Jy ! Component: 3850 - total flux cleaned = -0.0026273 Jy ! Component: 3900 - total flux cleaned = -0.00261894 Jy ! Component: 3950 - total flux cleaned = -0.00252795 Jy ! Component: 4000 - total flux cleaned = -0.00249501 Jy ! Component: 4050 - total flux cleaned = -0.002454 Jy ! Total flux subtracted in 4096 components = -0.00242121 Jy ! Clean residual min=-0.000421 max=0.000520 Jy/beam ! Clean residual mean=0.000002 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0400943 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 423 components and 0.0400942 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1140+1203_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 13.38 at -20.17 degrees (North through East) ! Clean map min=-0.0024894 max=0.040993 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1140+1203_S_b_map.fits wmodel /vlbi/uf001/uva//J1140+1203_S_b_map.mod ! Writing 423 model components to file: /vlbi/uf001/uva//J1140+1203_S_b_map.mod wobs /vlbi/uf001/uva//J1140+1203_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1140+1203_S_b_uvs.fits wwins /vlbi/uf001/uva//J1140+1203_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1140+1203_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0409935 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000150668 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10263 1.10263 2.20525 4.4105 8.82101 17.642 35.284 70.5681 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.04 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 272.077 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1140+1203_S_b_dfm.log closed on Mon Jan 14 01:24:31 2019