! Started logfile: /vlbi/uf001/uva//J1139+4032_S_dfm.log on Mon Jan 14 01:23:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1139+4032_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1139+4032_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.968254 visibilities/baseline/integration-bin.
! Found source: J1139+4032
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5490 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1139+4032_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.063866Jy  sigma=21.180395
! Fit after  self-cal, rms=0.668194Jy  sigma=13.578367
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.103 mas, bmaj=4.872 mas, bpa=-5.906 degrees
! Estimated noise=0.692634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.251791 Jy
! Component: 100  -  total flux cleaned = 0.343696 Jy
! Total flux subtracted in 100 components = 0.343696 Jy
! Clean residual min=-0.012423 max=0.039273 Jy/beam
! Clean residual mean=-0.000023 rms=0.003838 Jy/beam
! Combined flux in latest and established models = 0.343696 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.343696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103488Jy  sigma=2.022349
! Fit after  self-cal, rms=0.103260Jy  sigma=2.018902
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.042186 Jy
! Component: 100  -  total flux cleaned = 0.063706 Jy
! Total flux subtracted in 100 components = 0.063706 Jy
! Clean residual min=-0.009785 max=0.026147 Jy/beam
! Clean residual mean=-0.000012 rms=0.002519 Jy/beam
! Combined flux in latest and established models = 0.407402 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.407402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079220Jy  sigma=1.540873
! Fit after  self-cal, rms=0.079137Jy  sigma=1.539496
! Inverting map 
! Added new window around map position (-5, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230314 Jy
! Component: 100  -  total flux cleaned = 0.0344258 Jy
! Total flux subtracted in 100 components = 0.0344258 Jy
! Clean residual min=-0.009126 max=0.009692 Jy/beam
! Clean residual mean=-0.000008 rms=0.001956 Jy/beam
! Combined flux in latest and established models = 0.441828 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 0.441828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070611Jy  sigma=1.370800
! Fit after  self-cal, rms=0.069868Jy  sigma=1.355695
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.673 mas, bmaj=5.536 mas, bpa=-4.759 degrees
! Estimated noise=0.522594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136896 Jy
! Component: 100  -  total flux cleaned = 0.0221141 Jy
! Component: 150  -  total flux cleaned = 0.0281359 Jy
! Component: 200  -  total flux cleaned = 0.0325891 Jy
! Total flux subtracted in 200 components = 0.0325891 Jy
! Clean residual min=-0.009285 max=0.007703 Jy/beam
! Clean residual mean=-0.000024 rms=0.001917 Jy/beam
! Combined flux in latest and established models = 0.474417 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 69 components and 0.474417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066675Jy  sigma=1.292552
! Fit after  self-cal, rms=0.066470Jy  sigma=1.288160
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.673 x 5.536 at -4.759 degrees (North through East)
! Clean map  min=-0.0087186  max=0.3236 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        0.99     KP        1.03     
!   LA        0.88     MK        1.04     NL        1.08     OV        1.01     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        0.99     KP        1.02     
!   LA        0.90     MK        1.06     NL        1.05     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        0.99     KP        1.01     
!   LA        0.92     MK        1.02     NL        1.04     OV        0.98     
!   PT        1.06     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.066470Jy  sigma=1.288160
! Fit after  self-cal, rms=0.061615Jy  sigma=1.181237
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.706 mas, bmaj=5.58 mas, bpa=-4.413 degrees
! Estimated noise=0.522343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000567949 Jy
! Component: 100  -  total flux cleaned = -0.00102478 Jy
! Component: 150  -  total flux cleaned = -0.00119741 Jy
! Component: 200  -  total flux cleaned = -0.00135508 Jy
! Total flux subtracted in 200 components = -0.00135508 Jy
! Clean residual min=-0.004633 max=0.004913 Jy/beam
! Clean residual mean=-0.000021 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.473062 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 79 components and 0.473062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061523Jy  sigma=1.179670
! Fit after  self-cal, rms=0.061553Jy  sigma=1.179370
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061553Jy  sigma=1.179370
! Fit after  self-cal, rms=0.059213Jy  sigma=1.118546
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.696 mas, bmaj=5.567 mas, bpa=-4.503 degrees
! Estimated noise=0.521724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154973 Jy
! Component: 100  -  total flux cleaned = -0.0016451 Jy
! Component: 150  -  total flux cleaned = -0.0016152 Jy
! Component: 200  -  total flux cleaned = -0.0016163 Jy
! Total flux subtracted in 200 components = -0.0016163 Jy
! Clean residual min=-0.002427 max=0.002545 Jy/beam
! Clean residual mean=0.000006 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.471445 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 85 components and 0.471445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059136Jy  sigma=1.117248
! Fit after  self-cal, rms=0.059148Jy  sigma=1.116996
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (102, 118).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177582 Jy
! Component: 100  -  total flux cleaned = 0.00177405 Jy
! Component: 150  -  total flux cleaned = 0.00177323 Jy
! Component: 200  -  total flux cleaned = 0.00170327 Jy
! Total flux subtracted in 200 components = 0.00170327 Jy
! Clean residual min=-0.002329 max=0.002119 Jy/beam
! Clean residual mean=0.000008 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.473149 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.473149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059052Jy  sigma=1.115315
! Fit after  self-cal, rms=0.059046Jy  sigma=1.115271
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059046Jy  sigma=1.115271
! Fit after  self-cal, rms=0.059105Jy  sigma=1.114943
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.7 mas, bmaj=5.565 mas, bpa=-4.439 degrees
! Estimated noise=0.52182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000423224 Jy
! Component: 100  -  total flux cleaned = -0.00031635 Jy
! Component: 150  -  total flux cleaned = -0.000313915 Jy
! Component: 200  -  total flux cleaned = -0.000369801 Jy
! Total flux subtracted in 200 components = -0.000369801 Jy
! Clean residual min=-0.002269 max=0.002092 Jy/beam
! Clean residual mean=0.000007 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.472779 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 0.472779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059065Jy  sigma=1.114276
! Fit after  self-cal, rms=0.059063Jy  sigma=1.114237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.13468e-05 Jy
! Component: 100  -  total flux cleaned = -4.55819e-05 Jy
! Component: 150  -  total flux cleaned = -4.63315e-05 Jy
! Component: 200  -  total flux cleaned = -4.71453e-05 Jy
! Total flux subtracted in 200 components = -4.71453e-05 Jy
! Clean residual min=-0.002289 max=0.002077 Jy/beam
! Clean residual mean=0.000007 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.472732 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 112 components and 0.472732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059042Jy  sigma=1.113880
! Fit after  self-cal, rms=0.059042Jy  sigma=1.113863
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059042Jy  sigma=1.113863
! Fit after  self-cal, rms=0.059092Jy  sigma=1.113763
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.742 mas, bmaj=8.988 mas, bpa=-0.2169 degrees
! Estimated noise=0.659088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000698145 Jy
! Component: 100  -  total flux cleaned = -0.000697339 Jy
! Component: 150  -  total flux cleaned = -0.000771624 Jy
! Component: 200  -  total flux cleaned = -0.00084924 Jy
! Total flux subtracted in 200 components = -0.00084924 Jy
! Clean residual min=-0.002331 max=0.002098 Jy/beam
! Clean residual mean=0.000012 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.471883 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 124 components and 0.471883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059082Jy  sigma=1.113636
! Fit after  self-cal, rms=0.059078Jy  sigma=1.113559
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.11174e-05 Jy
! Component: 100  -  total flux cleaned = -9.60173e-05 Jy
! Component: 150  -  total flux cleaned = -0.000122349 Jy
! Component: 200  -  total flux cleaned = -0.000146677 Jy
! Total flux subtracted in 200 components = -0.000146677 Jy
! Clean residual min=-0.002336 max=0.002089 Jy/beam
! Clean residual mean=0.000012 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.471736 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 135 components and 0.471736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059077Jy  sigma=1.113565
! Fit after  self-cal, rms=0.059076Jy  sigma=1.113534
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.703 mas, bmaj=5.565 mas, bpa=-4.352 degrees
! Estimated noise=0.522063 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.703 x 5.565 at -4.352 degrees (North through East)
! Clean map  min=-0.0022297  max=0.32354 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=4.89 mas, bpa=-5.651 degrees
! Estimated noise=0.694228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.251612 Jy
! Component: 100  -  total flux cleaned = 0.343058 Jy
! Component: 150  -  total flux cleaned = 0.388461 Jy
! Component: 200  -  total flux cleaned = 0.414003 Jy
! Total flux subtracted in 200 components = 0.414003 Jy
! Clean residual min=-0.005238 max=0.013099 Jy/beam
! Clean residual mean=-0.000003 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.414003 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.414003 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.703 mas, bmaj=5.565 mas, bpa=-4.352 degrees
! Estimated noise=0.522063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203181 Jy
! Component: 100  -  total flux cleaned = 0.0320986 Jy
! Component: 150  -  total flux cleaned = 0.0394042 Jy
! Component: 200  -  total flux cleaned = 0.0441983 Jy
! Total flux subtracted in 200 components = 0.0441983 Jy
! Clean residual min=-0.002352 max=0.002754 Jy/beam
! Clean residual mean=0.000002 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.458201 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 52 components and 0.458201 Jy
! Inverting map 
! Added new window around map position (3, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351157 Jy
! Component: 100  -  total flux cleaned = 0.0061392 Jy
! Component: 150  -  total flux cleaned = 0.00814141 Jy
! Component: 200  -  total flux cleaned = 0.00950851 Jy
! Total flux subtracted in 200 components = 0.00950851 Jy
! Clean residual min=-0.002241 max=0.002162 Jy/beam
! Clean residual mean=0.000006 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.46771 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 69 components and 0.46771 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.742 mas, bmaj=8.988 mas, bpa=-0.2169 degrees
! Estimated noise=0.659088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180906 Jy
! Component: 100  -  total flux cleaned = 0.00296505 Jy
! Component: 150  -  total flux cleaned = 0.0032068 Jy
! Component: 200  -  total flux cleaned = 0.00337881 Jy
! Total flux subtracted in 200 components = 0.00337881 Jy
! Clean residual min=-0.002304 max=0.002057 Jy/beam
! Clean residual mean=0.000013 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.471089 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64727e-05 Jy
! Component: 100  -  total flux cleaned = 0.00016036 Jy
! Component: 150  -  total flux cleaned = 0.000198485 Jy
! Component: 200  -  total flux cleaned = 0.000231622 Jy
! Total flux subtracted in 200 components = 0.000231622 Jy
! Clean residual min=-0.002238 max=0.002078 Jy/beam
! Clean residual mean=0.000013 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.47132 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 109 components and 0.47132 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.703 mas, bmaj=5.565 mas, bpa=-4.352 degrees
! Estimated noise=0.522063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348027 Jy
! Component: 100  -  total flux cleaned = -0.000225986 Jy
! Component: 150  -  total flux cleaned = -0.00019079 Jy
! Component: 200  -  total flux cleaned = -0.000157735 Jy
! Total flux subtracted in 200 components = -0.000157735 Jy
! Clean residual min=-0.002112 max=0.002047 Jy/beam
! Clean residual mean=0.000006 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.471162 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.471162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059066Jy  sigma=1.113297
! Fit after  self-cal, rms=0.059051Jy  sigma=1.112989
wmodel J1139+4032_S_map.mod
! Writing 125 model components to file: J1139+4032_S_map.mod
wobs   J1139+4032_S_uvs.fits
! Writing UV FITS file: J1139+4032_S_uvs.fits
wwins  J1139+4032_S_map.win
! wwins: Wrote 4 windows to J1139+4032_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015194 Jy
! Component: 100  -  total flux cleaned = 0.000447144 Jy
! Component: 150  -  total flux cleaned = 0.000725857 Jy
! Component: 200  -  total flux cleaned = 0.000826085 Jy
! Component: 250  -  total flux cleaned = 0.000857622 Jy
! Component: 300  -  total flux cleaned = 0.000794685 Jy
! Component: 350  -  total flux cleaned = 0.000825847 Jy
! Component: 400  -  total flux cleaned = 0.000915459 Jy
! Component: 450  -  total flux cleaned = 0.000944532 Jy
! Component: 500  -  total flux cleaned = 0.00100193 Jy
! Component: 550  -  total flux cleaned = 0.00108639 Jy
! Component: 600  -  total flux cleaned = 0.00119698 Jy
! Component: 650  -  total flux cleaned = 0.00122459 Jy
! Component: 700  -  total flux cleaned = 0.00146554 Jy
! Component: 750  -  total flux cleaned = 0.00154419 Jy
! Component: 800  -  total flux cleaned = 0.00170008 Jy
! Component: 850  -  total flux cleaned = 0.00182864 Jy
! Component: 900  -  total flux cleaned = 0.00205581 Jy
! Component: 950  -  total flux cleaned = 0.00220497 Jy
! Component: 1000  -  total flux cleaned = 0.00232814 Jy
! Component: 1050  -  total flux cleaned = 0.00247412 Jy
! Component: 1100  -  total flux cleaned = 0.00261742 Jy
! Component: 1150  -  total flux cleaned = 0.00273546 Jy
! Component: 1200  -  total flux cleaned = 0.00282897 Jy
! Component: 1250  -  total flux cleaned = 0.00285236 Jy
! Component: 1300  -  total flux cleaned = 0.00289834 Jy
! Component: 1350  -  total flux cleaned = 0.00303273 Jy
! Component: 1400  -  total flux cleaned = 0.00305473 Jy
! Component: 1450  -  total flux cleaned = 0.00305484 Jy
! Component: 1500  -  total flux cleaned = 0.00316339 Jy
! Component: 1550  -  total flux cleaned = 0.00312051 Jy
! Component: 1600  -  total flux cleaned = 0.00322692 Jy
! Component: 1650  -  total flux cleaned = 0.00326914 Jy
! Component: 1700  -  total flux cleaned = 0.00328999 Jy
! Component: 1750  -  total flux cleaned = 0.00333126 Jy
! Component: 1800  -  total flux cleaned = 0.00337212 Jy
! Component: 1850  -  total flux cleaned = 0.00337189 Jy
! Component: 1900  -  total flux cleaned = 0.00343228 Jy
! Component: 1950  -  total flux cleaned = 0.00343241 Jy
! Component: 2000  -  total flux cleaned = 0.0035113 Jy
! Component: 2050  -  total flux cleaned = 0.00355049 Jy
! Component: 2100  -  total flux cleaned = 0.00353107 Jy
! Component: 2150  -  total flux cleaned = 0.00362727 Jy
! Component: 2200  -  total flux cleaned = 0.00366495 Jy
! Component: 2250  -  total flux cleaned = 0.00368364 Jy
! Component: 2300  -  total flux cleaned = 0.00375853 Jy
! Component: 2350  -  total flux cleaned = 0.00385098 Jy
! Component: 2400  -  total flux cleaned = 0.00379587 Jy
! Component: 2450  -  total flux cleaned = 0.0039421 Jy
! Component: 2500  -  total flux cleaned = 0.00399654 Jy
! Component: 2550  -  total flux cleaned = 0.00406842 Jy
! Component: 2600  -  total flux cleaned = 0.00412208 Jy
! Component: 2650  -  total flux cleaned = 0.00422845 Jy
! Component: 2700  -  total flux cleaned = 0.00429907 Jy
! Component: 2750  -  total flux cleaned = 0.00442163 Jy
! Component: 2800  -  total flux cleaned = 0.00452603 Jy
! Component: 2850  -  total flux cleaned = 0.00457775 Jy
! Component: 2900  -  total flux cleaned = 0.00461208 Jy
! Component: 2950  -  total flux cleaned = 0.00473154 Jy
! Component: 3000  -  total flux cleaned = 0.00473153 Jy
! Component: 3050  -  total flux cleaned = 0.00479879 Jy
! Component: 3100  -  total flux cleaned = 0.00474859 Jy
! Component: 3150  -  total flux cleaned = 0.00483181 Jy
! Component: 3200  -  total flux cleaned = 0.00496365 Jy
! Component: 3250  -  total flux cleaned = 0.00493102 Jy
! Component: 3300  -  total flux cleaned = 0.00491454 Jy
! Component: 3350  -  total flux cleaned = 0.00496325 Jy
! Component: 3400  -  total flux cleaned = 0.0049471 Jy
! Component: 3450  -  total flux cleaned = 0.00512304 Jy
! Component: 3500  -  total flux cleaned = 0.00510717 Jy
! Component: 3550  -  total flux cleaned = 0.00517037 Jy
! Component: 3600  -  total flux cleaned = 0.00524905 Jy
! Component: 3650  -  total flux cleaned = 0.00529588 Jy
! Component: 3700  -  total flux cleaned = 0.00524921 Jy
! Component: 3750  -  total flux cleaned = 0.00532637 Jy
! Component: 3800  -  total flux cleaned = 0.00538777 Jy
! Component: 3850  -  total flux cleaned = 0.00535713 Jy
! Component: 3900  -  total flux cleaned = 0.00547879 Jy
! Component: 3950  -  total flux cleaned = 0.00550881 Jy
! Component: 4000  -  total flux cleaned = 0.00556896 Jy
! Component: 4050  -  total flux cleaned = 0.00564352 Jy
! Total flux subtracted in 4096 components = 0.00559897 Jy
! Clean residual min=-0.000878 max=0.000803 Jy/beam
! Clean residual mean=0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.476761 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 427 components and 0.476761 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1139+4032_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.703 x 5.565 at -4.352 degrees (North through East)
! Clean map  min=-0.0018527  max=0.32401 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1139+4032_S_map.fits
wmodel /vlbi/uf001/uva//J1139+4032_S_map.mod
! Writing 427 model components to file: /vlbi/uf001/uva//J1139+4032_S_map.mod
wobs   /vlbi/uf001/uva//J1139+4032_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1139+4032_S_uvs.fits
wwins  /vlbi/uf001/uva//J1139+4032_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1139+4032_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.324011 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000271427 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.251312 0.251312 0.502624 1.00525 2.0105 4.02099 8.04199 16.084 32.168 64.3359
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.324 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1193.73 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1139+4032_S_dfm.log closed on Mon Jan 14 01:23:28 2019