! Started logfile: /vlbi/uf001/uva//J1138-4653_X_dfm.log on Mon Jan 14 01:23:17 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1138-4653_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1138-4653_X_uva.fits
! AN table 1: 156 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.864164 visibilities/baseline/integration-bin.
! Found source: J1138-4653
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 33972 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1138-4653_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011375Jy  sigma=18.689593
! Fit after  self-cal, rms=0.900573Jy  sigma=16.625165
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5216 mas, bmaj=1.634 mas, bpa=-3.358 degrees
! Estimated noise=0.521675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0694855 Jy
! Component: 100  -  total flux cleaned = 0.0883845 Jy
! Total flux subtracted in 100 components = 0.0883845 Jy
! Clean residual min=-0.011009 max=0.021487 Jy/beam
! Clean residual mean=0.000026 rms=0.001969 Jy/beam
! Combined flux in latest and established models = 0.0883845 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0883845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077228Jy  sigma=1.401814
! Fit after  self-cal, rms=0.076862Jy  sigma=1.395332
! Inverting map 
! Added new window around map position (-0.6, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178533 Jy
! Component: 100  -  total flux cleaned = 0.0243396 Jy
! Total flux subtracted in 100 components = 0.0243396 Jy
! Clean residual min=-0.009722 max=0.012497 Jy/beam
! Clean residual mean=0.000013 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.112724 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.112724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072234Jy  sigma=1.308790
! Fit after  self-cal, rms=0.071753Jy  sigma=1.299693
! Inverting map 
! Added new window around map position (1, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00442521 Jy
! Component: 100  -  total flux cleaned = 0.0063654 Jy
! Total flux subtracted in 100 components = 0.0063654 Jy
! Clean residual min=-0.008880 max=0.007610 Jy/beam
! Clean residual mean=0.000009 rms=0.001272 Jy/beam
! Combined flux in latest and established models = 0.119089 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.119089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070972Jy  sigma=1.285986
! Fit after  self-cal, rms=0.070849Jy  sigma=1.283531
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7372 mas, bmaj=2.097 mas, bpa=-2.561 degrees
! Estimated noise=0.210292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00477192 Jy
! Component: 100  -  total flux cleaned = 0.00559774 Jy
! Component: 150  -  total flux cleaned = 0.00588773 Jy
! Component: 200  -  total flux cleaned = 0.00614312 Jy
! Total flux subtracted in 200 components = 0.00614312 Jy
! Clean residual min=-0.004348 max=0.003566 Jy/beam
! Clean residual mean=0.000025 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.125233 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 45 components and 0.125233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070421Jy  sigma=1.276059
! Fit after  self-cal, rms=0.070394Jy  sigma=1.275482
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7372 x 2.097 at -2.561 degrees (North through East)
! Clean map  min=-0.0040633  max=0.087787 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.04     LA        1.03     MK        1.05     
!   OV        1.04     PT        0.94     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.06     LA        1.03     MK        1.07     
!   OV        1.03     PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.03     LA        1.00     MK        1.01     
!   OV        1.05     PT        0.94     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.04     LA        0.99     MK        1.02     
!   OV        1.01     PT        0.91     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.04     LA        1.00     MK        1.04     
!   OV        1.01     PT        0.95     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.03     LA        1.01     MK        0.98     
!   OV        1.02     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.07     LA        1.04     MK        1.05     
!   OV        1.05     PT        0.92     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.07     LA        1.01     MK        1.03     
!   OV        0.98     PT        0.93     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.07     LA        0.99     MK        0.96     
!   OV        0.98     PT        0.91     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.05     LA        1.02     MK        0.97     
!   OV        1.00     PT        0.91     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.05     LA        1.03     MK        0.91     
!   OV        0.99     PT        0.93     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.00     LA        1.01     MK        0.96     
!   OV        0.98     PT        0.91     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.070394Jy  sigma=1.275482
! Fit after  self-cal, rms=0.069764Jy  sigma=1.270168
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7375 mas, bmaj=2.097 mas, bpa=-2.533 degrees
! Estimated noise=0.210109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123746 Jy
! Component: 100  -  total flux cleaned = 5.11452e-05 Jy
! Component: 150  -  total flux cleaned = 5.25664e-05 Jy
! Component: 200  -  total flux cleaned = 5.09905e-05 Jy
! Total flux subtracted in 200 components = 5.09905e-05 Jy
! Clean residual min=-0.004243 max=0.002545 Jy/beam
! Clean residual mean=-0.000009 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.125284 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.125284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069634Jy  sigma=1.267955
! Fit after  self-cal, rms=0.069644Jy  sigma=1.267600
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069644Jy  sigma=1.267600
! Fit after  self-cal, rms=0.069617Jy  sigma=1.266386
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7378 mas, bmaj=2.102 mas, bpa=-2.334 degrees
! Estimated noise=0.21002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.57933e-05 Jy
! Component: 100  -  total flux cleaned = -2.40628e-05 Jy
! Component: 150  -  total flux cleaned = 2.1644e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105757 Jy
! Total flux subtracted in 200 components = 0.000105757 Jy
! Clean residual min=-0.003566 max=0.002412 Jy/beam
! Clean residual mean=-0.000010 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.125389 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.125389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069549Jy  sigma=1.265262
! Fit after  self-cal, rms=0.069546Jy  sigma=1.265153
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011583 Jy
! Component: 100  -  total flux cleaned = 0.000195653 Jy
! Component: 150  -  total flux cleaned = 0.000232249 Jy
! Component: 200  -  total flux cleaned = 0.000266226 Jy
! Total flux subtracted in 200 components = 0.000266226 Jy
! Clean residual min=-0.003361 max=0.002381 Jy/beam
! Clean residual mean=-0.000011 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.125656 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.125656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069505Jy  sigma=1.264497
! Fit after  self-cal, rms=0.069502Jy  sigma=1.264436
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069502Jy  sigma=1.264436
! Fit after  self-cal, rms=0.071412Jy  sigma=1.258497
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7446 mas, bmaj=2.142 mas, bpa=-2.215 degrees
! Estimated noise=0.212856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.25752e-05 Jy
! Component: 100  -  total flux cleaned = -1.35152e-05 Jy
! Component: 150  -  total flux cleaned = 4.27194e-05 Jy
! Component: 200  -  total flux cleaned = 9.37924e-05 Jy
! Total flux subtracted in 200 components = 9.37924e-05 Jy
! Clean residual min=-0.002486 max=0.002349 Jy/beam
! Clean residual mean=-0.000008 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.125749 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.125749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071385Jy  sigma=1.258012
! Fit after  self-cal, rms=0.071411Jy  sigma=1.257847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152053 Jy
! Component: 100  -  total flux cleaned = 0.000197457 Jy
! Component: 150  -  total flux cleaned = 0.000197047 Jy
! Component: 200  -  total flux cleaned = 0.000196946 Jy
! Total flux subtracted in 200 components = 0.000196946 Jy
! Clean residual min=-0.002446 max=0.002286 Jy/beam
! Clean residual mean=-0.000009 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.125946 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.125946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071399Jy  sigma=1.257621
! Fit after  self-cal, rms=0.071398Jy  sigma=1.257605
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071398Jy  sigma=1.257605
! Fit after  self-cal, rms=0.072072Jy  sigma=1.257461
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=10.94 mas, bpa=-1.567 degrees
! Estimated noise=0.291962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.45065e-06 Jy
! Component: 100  -  total flux cleaned = -2.42886e-05 Jy
! Component: 150  -  total flux cleaned = -3.6199e-05 Jy
! Component: 200  -  total flux cleaned = -3.50999e-05 Jy
! Total flux subtracted in 200 components = -3.50999e-05 Jy
! Clean residual min=-0.002447 max=0.002712 Jy/beam
! Clean residual mean=-0.000014 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.125911 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 96 components and 0.125911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072069Jy  sigma=1.257428
! Fit after  self-cal, rms=0.072069Jy  sigma=1.257324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.53521e-05 Jy
! Component: 100  -  total flux cleaned = 6.29882e-05 Jy
! Component: 150  -  total flux cleaned = 6.14887e-05 Jy
! Component: 200  -  total flux cleaned = 4.00279e-05 Jy
! Total flux subtracted in 200 components = 4.00279e-05 Jy
! Clean residual min=-0.002458 max=0.002651 Jy/beam
! Clean residual mean=-0.000015 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.125951 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 99 components and 0.125951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072067Jy  sigma=1.257303
! Fit after  self-cal, rms=0.072066Jy  sigma=1.257268
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7472 mas, bmaj=2.154 mas, bpa=-2.086 degrees
! Estimated noise=0.213563 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7472 x 2.154 at -2.086 degrees (North through East)
! Clean map  min=-0.00355  max=0.08923 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5273 mas, bmaj=1.655 mas, bpa=-2.928 degrees
! Estimated noise=0.538435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731129 Jy
! Component: 100  -  total flux cleaned = 0.0976226 Jy
! Component: 150  -  total flux cleaned = 0.10978 Jy
! Component: 200  -  total flux cleaned = 0.115721 Jy
! Total flux subtracted in 200 components = 0.115721 Jy
! Clean residual min=-0.006168 max=0.005496 Jy/beam
! Clean residual mean=0.000006 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.115721 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.115721 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7472 mas, bmaj=2.154 mas, bpa=-2.086 degrees
! Estimated noise=0.213563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00585991 Jy
! Component: 100  -  total flux cleaned = 0.00834228 Jy
! Component: 150  -  total flux cleaned = 0.00878752 Jy
! Component: 200  -  total flux cleaned = 0.00919031 Jy
! Total flux subtracted in 200 components = 0.00919031 Jy
! Clean residual min=-0.002866 max=0.003228 Jy/beam
! Clean residual mean=-0.000004 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.124912 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 36 components and 0.124912 Jy
! Inverting map 
! Added new window around map position (4.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277386 Jy
! Component: 100  -  total flux cleaned = 0.00379049 Jy
! Component: 150  -  total flux cleaned = 0.00410852 Jy
! Component: 200  -  total flux cleaned = 0.00421326 Jy
! Total flux subtracted in 200 components = 0.00421326 Jy
! Clean residual min=-0.002390 max=0.001653 Jy/beam
! Clean residual mean=-0.000016 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.129125 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 58 components and 0.129125 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=10.94 mas, bpa=-1.567 degrees
! Estimated noise=0.291962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.9555e-05 Jy
! Component: 100  -  total flux cleaned = 0.000121458 Jy
! Component: 150  -  total flux cleaned = 0.000121469 Jy
! Component: 200  -  total flux cleaned = 0.000121672 Jy
! Total flux subtracted in 200 components = 0.000121672 Jy
! Clean residual min=-0.002213 max=0.002402 Jy/beam
! Clean residual mean=-0.000035 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.129247 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.82869e-05 Jy
! Component: 100  -  total flux cleaned = -1.78423e-05 Jy
! Component: 150  -  total flux cleaned = -1.74899e-05 Jy
! Component: 200  -  total flux cleaned = -1.73705e-05 Jy
! Total flux subtracted in 200 components = -1.73705e-05 Jy
! Clean residual min=-0.002065 max=0.002379 Jy/beam
! Clean residual mean=-0.000035 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.129229 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.129229 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7472 mas, bmaj=2.154 mas, bpa=-2.086 degrees
! Estimated noise=0.213563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126126 Jy
! Component: 100  -  total flux cleaned = -1.57234e-05 Jy
! Component: 150  -  total flux cleaned = 7.92728e-05 Jy
! Component: 200  -  total flux cleaned = 0.000134642 Jy
! Total flux subtracted in 200 components = 0.000134642 Jy
! Clean residual min=-0.002206 max=0.001620 Jy/beam
! Clean residual mean=-0.000017 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.129364 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.129364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072066Jy  sigma=1.257062
! Fit after  self-cal, rms=0.072035Jy  sigma=1.256486
wmodel J1138-4653_X_map.mod
! Writing 90 model components to file: J1138-4653_X_map.mod
wobs   J1138-4653_X_uvs.fits
! Writing UV FITS file: J1138-4653_X_uvs.fits
wwins  J1138-4653_X_map.win
! wwins: Wrote 5 windows to J1138-4653_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00088777 Jy
! Component: 100  -  total flux cleaned = -0.000835062 Jy
! Component: 150  -  total flux cleaned = -0.000834168 Jy
! Component: 200  -  total flux cleaned = -0.000810797 Jy
! Component: 250  -  total flux cleaned = -0.00078982 Jy
! Component: 300  -  total flux cleaned = -0.000809312 Jy
! Component: 350  -  total flux cleaned = -0.000867139 Jy
! Component: 400  -  total flux cleaned = -0.000959852 Jy
! Component: 450  -  total flux cleaned = -0.00112113 Jy
! Component: 500  -  total flux cleaned = -0.00117313 Jy
! Component: 550  -  total flux cleaned = -0.00117291 Jy
! Component: 600  -  total flux cleaned = -0.00113981 Jy
! Component: 650  -  total flux cleaned = -0.00107605 Jy
! Component: 700  -  total flux cleaned = -0.00104452 Jy
! Component: 750  -  total flux cleaned = -0.000952149 Jy
! Component: 800  -  total flux cleaned = -0.000862144 Jy
! Component: 850  -  total flux cleaned = -0.000788712 Jy
! Component: 900  -  total flux cleaned = -0.000774261 Jy
! Component: 950  -  total flux cleaned = -0.000717273 Jy
! Component: 1000  -  total flux cleaned = -0.000647528 Jy
! Component: 1050  -  total flux cleaned = -0.00061992 Jy
! Component: 1100  -  total flux cleaned = -0.000579142 Jy
! Component: 1150  -  total flux cleaned = -0.000498945 Jy
! Component: 1200  -  total flux cleaned = -0.000446274 Jy
! Component: 1250  -  total flux cleaned = -0.000420467 Jy
! Component: 1300  -  total flux cleaned = -0.000356354 Jy
! Component: 1350  -  total flux cleaned = -0.000318356 Jy
! Component: 1400  -  total flux cleaned = -0.000280992 Jy
! Component: 1450  -  total flux cleaned = -0.000379471 Jy
! Component: 1500  -  total flux cleaned = -0.000367116 Jy
! Component: 1550  -  total flux cleaned = -0.000403216 Jy
! Component: 1600  -  total flux cleaned = -0.000486656 Jy
! Component: 1650  -  total flux cleaned = -0.000568778 Jy
! Component: 1700  -  total flux cleaned = -0.000580491 Jy
! Component: 1750  -  total flux cleaned = -0.000649877 Jy
! Component: 1800  -  total flux cleaned = -0.000638399 Jy
! Component: 1850  -  total flux cleaned = -0.000661192 Jy
! Component: 1900  -  total flux cleaned = -0.000694906 Jy
! Component: 1950  -  total flux cleaned = -0.000694881 Jy
! Component: 2000  -  total flux cleaned = -0.000761002 Jy
! Component: 2050  -  total flux cleaned = -0.000771968 Jy
! Component: 2100  -  total flux cleaned = -0.000793695 Jy
! Component: 2150  -  total flux cleaned = -0.000868569 Jy
! Component: 2200  -  total flux cleaned = -0.000900349 Jy
! Component: 2250  -  total flux cleaned = -0.000931911 Jy
! Component: 2300  -  total flux cleaned = -0.000984087 Jy
! Component: 2350  -  total flux cleaned = -0.00100477 Jy
! Component: 2400  -  total flux cleaned = -0.00101513 Jy
! Component: 2450  -  total flux cleaned = -0.00106612 Jy
! Component: 2500  -  total flux cleaned = -0.00110656 Jy
! Component: 2550  -  total flux cleaned = -0.0011267 Jy
! Component: 2600  -  total flux cleaned = -0.00115652 Jy
! Component: 2650  -  total flux cleaned = -0.00120582 Jy
! Component: 2700  -  total flux cleaned = -0.00121557 Jy
! Component: 2750  -  total flux cleaned = -0.00123501 Jy
! Component: 2800  -  total flux cleaned = -0.00128325 Jy
! Component: 2850  -  total flux cleaned = -0.00130233 Jy
! Component: 2900  -  total flux cleaned = -0.0012929 Jy
! Component: 2950  -  total flux cleaned = -0.00134964 Jy
! Component: 3000  -  total flux cleaned = -0.00138719 Jy
! Component: 3050  -  total flux cleaned = -0.0014152 Jy
! Component: 3100  -  total flux cleaned = -0.00142441 Jy
! Component: 3150  -  total flux cleaned = -0.00144287 Jy
! Component: 3200  -  total flux cleaned = -0.00146119 Jy
! Component: 3250  -  total flux cleaned = -0.00147932 Jy
! Component: 3300  -  total flux cleaned = -0.00147025 Jy
! Component: 3350  -  total flux cleaned = -0.00149726 Jy
! Component: 3400  -  total flux cleaned = -0.00151507 Jy
! Component: 3450  -  total flux cleaned = -0.0015416 Jy
! Component: 3500  -  total flux cleaned = -0.00155918 Jy
! Component: 3550  -  total flux cleaned = -0.00159419 Jy
! Component: 3600  -  total flux cleaned = -0.00159427 Jy
! Component: 3650  -  total flux cleaned = -0.00161156 Jy
! Component: 3700  -  total flux cleaned = -0.00158572 Jy
! Component: 3750  -  total flux cleaned = -0.00162854 Jy
! Component: 3800  -  total flux cleaned = -0.00162006 Jy
! Component: 3850  -  total flux cleaned = -0.00162013 Jy
! Component: 3900  -  total flux cleaned = -0.00163696 Jy
! Component: 3950  -  total flux cleaned = -0.00163692 Jy
! Component: 4000  -  total flux cleaned = -0.00165358 Jy
! Component: 4050  -  total flux cleaned = -0.00165359 Jy
! Total flux subtracted in 4096 components = -0.00167833 Jy
! Clean residual min=-0.000550 max=0.000467 Jy/beam
! Clean residual mean=-0.000002 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.127685 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 393 components and 0.127685 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1138-4653_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7472 x 2.154 at -2.086 degrees (North through East)
! Clean map  min=-0.0020219  max=0.07374 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1138-4653_X_map.fits
wmodel /vlbi/uf001/uva//J1138-4653_X_map.mod
! Writing 393 model components to file: /vlbi/uf001/uva//J1138-4653_X_map.mod
wobs   /vlbi/uf001/uva//J1138-4653_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1138-4653_X_uvs.fits
wwins  /vlbi/uf001/uva//J1138-4653_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1138-4653_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0737396 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000142637 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.580298 0.580298 1.1606 2.32119 4.64239 9.28478 18.5696 37.1391 74.2782
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  516.975 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1138-4653_X_dfm.log closed on Mon Jan 14 01:23:23 2019