! Started logfile: /vlbi/uf001/uvm//J1136-0330_X_a_dfm.log on Sun Jan 13 21:29:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1136-0330_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1136-0330_X_a_uvm.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! AN table 2: 9 integrations on 1 of 1 possible baselines. ! AN table 3: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.650069 visibilities/baseline/integration-bin. ! Found source: J1136-0330 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1136-0330_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 182 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.103854Jy sigma=21.399309 ! Fit after self-cal, rms=0.571181Jy sigma=11.172106 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6396 mas, bmaj=1.65 mas, bpa=-3.862 degrees ! Estimated noise=0.450236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333528 Jy ! Component: 100 - total flux cleaned = 0.406259 Jy ! Total flux subtracted in 100 components = 0.406259 Jy ! Clean residual min=-0.011682 max=0.020291 Jy/beam ! Clean residual mean=-0.000001 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.406259 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.406259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094360Jy sigma=1.829239 ! Fit after self-cal, rms=0.094358Jy sigma=1.829206 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200551 Jy ! Component: 100 - total flux cleaned = 0.0309899 Jy ! Total flux subtracted in 100 components = 0.0309899 Jy ! Clean residual min=-0.010327 max=0.014486 Jy/beam ! Clean residual mean=-0.000005 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.437248 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.437249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088560Jy sigma=1.730284 ! Fit after self-cal, rms=0.088559Jy sigma=1.730229 ! Inverting map ! Added new window around map position (-1.8, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962329 Jy ! Component: 100 - total flux cleaned = 0.0143964 Jy ! Total flux subtracted in 100 components = 0.0143964 Jy ! Clean residual min=-0.009694 max=0.014352 Jy/beam ! Clean residual mean=-0.000006 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.451645 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.451645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086672Jy sigma=1.697144 ! Fit after self-cal, rms=0.086538Jy sigma=1.694600 ! Inverting map ! Added new window around map position (1.8, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105246 Jy ! Component: 100 - total flux cleaned = 0.014307 Jy ! Total flux subtracted in 100 components = 0.014307 Jy ! Clean residual min=-0.009792 max=0.010110 Jy/beam ! Clean residual mean=-0.000006 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.465952 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.465952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085034Jy sigma=1.668262 ! Fit after self-cal, rms=0.084984Jy sigma=1.667287 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7896 mas, bmaj=1.919 mas, bpa=-2.734 degrees ! Estimated noise=0.326525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586938 Jy ! Component: 100 - total flux cleaned = 0.00817784 Jy ! Component: 150 - total flux cleaned = 0.0103174 Jy ! Component: 200 - total flux cleaned = 0.0119667 Jy ! Total flux subtracted in 200 components = 0.0119667 Jy ! Clean residual min=-0.008149 max=0.009201 Jy/beam ! Clean residual mean=0.000006 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.477919 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.477919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083962Jy sigma=1.649488 ! Fit after self-cal, rms=0.083958Jy sigma=1.649408 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7896 x 1.919 at -2.734 degrees (North through East) ! Clean map min=-0.0075261 max=0.4338 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.95 KP 1.00 ! LA 0.96 MK 0.98 NL 1.11 OV 0.93 ! PT 0.90 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 0.89 KP 0.96 LA 0.97 ! MK 0.99 NL 1.02 OV 0.87 PT 1.35 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.95 KP 1.00 ! LA 0.95 MK 0.99 NL 1.11 OV 0.94 ! PT 0.89 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.94 KP 0.94 LA 0.96 ! MK 0.97 NL 1.04 OV 0.89 PT 1.31 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.96 KP 1.00 ! LA 0.95 MK 0.98 NL 1.09 OV 0.94 ! PT 0.88 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 0.89 KP 0.95 LA 0.97 ! MK 0.97 NL 1.04 OV 0.87 PT 1.34 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.95 KP 1.00 ! LA 0.95 MK 1.00 NL 1.11 OV 0.93 ! PT 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 0.93 KP 0.95 LA 0.95 ! MK 0.99 NL 1.04 OV 0.89 PT 1.37 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.95 KP 1.02 ! LA 0.96 MK 0.98 NL 1.12 OV 0.93 ! PT 0.88 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 0.91 KP 0.95 LA 0.96 ! MK 1.05 NL 1.03 OV 0.90 PT 1.41 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.94 KP 1.01 ! LA 0.96 MK 0.99 NL 1.11 OV 0.96 ! PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.94 KP 0.98 LA 0.96 ! MK 1.02 NL 1.03 OV 0.88 PT 1.33 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.96 KP 1.02 ! LA 0.95 MK 1.01 NL 1.12 OV 0.94 ! PT 0.88 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 0.95 KP 0.97 LA 1.00 ! MK 0.99 NL 1.05 OV 0.91 PT 1.40 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.95 KP 1.02 ! LA 0.96 MK 0.99 NL 1.12 OV 0.94 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.94 KP 0.97 LA 0.97 ! MK 1.00 NL 1.02 OV 0.90 PT 1.37 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.96 KP 0.99 ! LA 0.98 MK 0.99 NL 1.12 OV 0.95 ! PT 0.88 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 0.93 KP 0.98 LA 0.97 ! MK 1.01 NL 1.03 OV 0.91 PT 1.31 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.96 KP 1.01 ! LA 0.97 MK 1.02 NL 1.12 OV 0.95 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 0.96 KP 0.98 LA 0.95 ! MK 1.02 NL 1.04 OV 0.89 PT 1.40 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.95 KP 1.02 ! LA 0.97 MK 1.03 NL 1.12 OV 0.96 ! PT 0.88 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 0.95 KP 1.02 LA 1.01 ! MK 1.08 NL 1.06 OV 0.89 PT 1.34 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.98 KP 1.00 ! LA 0.96 MK 1.01 NL 1.12 OV 0.95 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 0.93 KP 0.95 LA 0.96 ! MK 1.04 NL 1.07 OV 0.88 PT 1.32 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.083958Jy sigma=1.649408 ! Fit after self-cal, rms=0.080236Jy sigma=1.415261 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.788 mas, bmaj=1.931 mas, bpa=-2.711 degrees ! Estimated noise=0.326092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00632401 Jy ! Component: 100 - total flux cleaned = -0.00841911 Jy ! Component: 150 - total flux cleaned = -0.00907754 Jy ! Component: 200 - total flux cleaned = -0.00951163 Jy ! Total flux subtracted in 200 components = -0.00951163 Jy ! Clean residual min=-0.005920 max=0.006342 Jy/beam ! Clean residual mean=0.000010 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.468407 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.468407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079690Jy sigma=1.402908 ! Fit after self-cal, rms=0.079717Jy sigma=1.402615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079717Jy sigma=1.402615 ! Fit after self-cal, rms=0.060653Jy sigma=1.084438 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=1.929 mas, bpa=-2.665 degrees ! Estimated noise=0.327251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180829 Jy ! Component: 100 - total flux cleaned = -0.00235221 Jy ! Component: 150 - total flux cleaned = -0.00301438 Jy ! Component: 200 - total flux cleaned = -0.00341111 Jy ! Total flux subtracted in 200 components = -0.00341111 Jy ! Clean residual min=-0.002640 max=0.003004 Jy/beam ! Clean residual mean=0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.464996 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.464996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060300Jy sigma=1.077564 ! Fit after self-cal, rms=0.060330Jy sigma=1.077385 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204678 Jy ! Component: 100 - total flux cleaned = 0.00204924 Jy ! Component: 150 - total flux cleaned = 0.00184314 Jy ! Component: 200 - total flux cleaned = 0.00146978 Jy ! Total flux subtracted in 200 components = 0.00146978 Jy ! Clean residual min=-0.002392 max=0.002482 Jy/beam ! Clean residual mean=0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.466466 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.466466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060126Jy sigma=1.073221 ! Fit after self-cal, rms=0.060120Jy sigma=1.073050 ! Inverting map ! Added new window around map position (-2.4, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236663 Jy ! Component: 100 - total flux cleaned = 0.0032096 Jy ! Component: 150 - total flux cleaned = 0.00353324 Jy ! Component: 200 - total flux cleaned = 0.003631 Jy ! Total flux subtracted in 200 components = 0.003631 Jy ! Clean residual min=-0.002224 max=0.002185 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.470096 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.470096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059993Jy sigma=1.070371 ! Fit after self-cal, rms=0.059986Jy sigma=1.070172 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059986Jy sigma=1.070172 ! Fit after self-cal, rms=0.059535Jy sigma=1.054680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7862 mas, bmaj=1.93 mas, bpa=-2.646 degrees ! Estimated noise=0.327699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167713 Jy ! Component: 100 - total flux cleaned = -0.00204674 Jy ! Component: 150 - total flux cleaned = -0.00224159 Jy ! Component: 200 - total flux cleaned = -0.00245545 Jy ! Total flux subtracted in 200 components = -0.00245545 Jy ! Clean residual min=-0.001892 max=0.002281 Jy/beam ! Clean residual mean=-0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.467641 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.467641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059420Jy sigma=1.052462 ! Fit after self-cal, rms=0.059422Jy sigma=1.052434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.4, 37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180335 Jy ! Component: 100 - total flux cleaned = 0.00188998 Jy ! Component: 150 - total flux cleaned = 0.001821 Jy ! Component: 200 - total flux cleaned = 0.00175637 Jy ! Total flux subtracted in 200 components = 0.00175637 Jy ! Clean residual min=-0.001778 max=0.001822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.469397 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 0.469397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059345Jy sigma=1.050968 ! Fit after self-cal, rms=0.059340Jy sigma=1.050871 ! Inverting map ! Added new window around map position (1.4, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142681 Jy ! Component: 100 - total flux cleaned = 0.00146863 Jy ! Component: 150 - total flux cleaned = 0.00153914 Jy ! Component: 200 - total flux cleaned = 0.00147571 Jy ! Total flux subtracted in 200 components = 0.00147571 Jy ! Clean residual min=-0.001625 max=0.001600 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.470873 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.470873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059274Jy sigma=1.049598 ! Fit after self-cal, rms=0.059272Jy sigma=1.049541 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059272Jy sigma=1.049541 ! Fit after self-cal, rms=0.059299Jy sigma=1.048992 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.022 mas, bmaj=3.365 mas, bpa=-0.4628 degrees ! Estimated noise=0.447597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110906 Jy ! Component: 100 - total flux cleaned = -0.0011455 Jy ! Component: 150 - total flux cleaned = -0.00114636 Jy ! Component: 200 - total flux cleaned = -0.00114711 Jy ! Total flux subtracted in 200 components = -0.00114711 Jy ! Clean residual min=-0.001739 max=0.001820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.469726 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.469726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059281Jy sigma=1.048667 ! Fit after self-cal, rms=0.059280Jy sigma=1.048643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172562 Jy ! Component: 100 - total flux cleaned = 0.000125867 Jy ! Component: 150 - total flux cleaned = 8.33232e-05 Jy ! Component: 200 - total flux cleaned = 4.27148e-05 Jy ! Total flux subtracted in 200 components = 4.27148e-05 Jy ! Clean residual min=-0.001650 max=0.001773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.469769 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 133 components and 0.469769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059275Jy sigma=1.048561 ! Fit after self-cal, rms=0.059275Jy sigma=1.048553 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.786 mas, bmaj=1.93 mas, bpa=-2.636 degrees ! Estimated noise=0.327984 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.786 x 1.93 at -2.636 degrees (North through East) ! Clean map min=-0.0019224 max=0.43458 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6372 mas, bmaj=1.657 mas, bpa=-3.69 degrees ! Estimated noise=0.45115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334183 Jy ! Component: 100 - total flux cleaned = 0.407204 Jy ! Component: 150 - total flux cleaned = 0.428874 Jy ! Component: 200 - total flux cleaned = 0.440498 Jy ! Total flux subtracted in 200 components = 0.440498 Jy ! Clean residual min=-0.004173 max=0.005751 Jy/beam ! Clean residual mean=0.000002 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.440498 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.440498 Jy ! Inverting map and beam ! Estimated beam: bmin=0.786 mas, bmaj=1.93 mas, bpa=-2.636 degrees ! Estimated noise=0.327984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00821657 Jy ! Component: 100 - total flux cleaned = 0.0132124 Jy ! Component: 150 - total flux cleaned = 0.0170275 Jy ! Component: 200 - total flux cleaned = 0.0200823 Jy ! Total flux subtracted in 200 components = 0.0200823 Jy ! Clean residual min=-0.002236 max=0.002796 Jy/beam ! Clean residual mean=0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.46058 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.46058 Jy ! Inverting map ! Added new window around map position (-0.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222234 Jy ! Component: 100 - total flux cleaned = 0.00354819 Jy ! Component: 150 - total flux cleaned = 0.00456469 Jy ! Component: 200 - total flux cleaned = 0.00506041 Jy ! Total flux subtracted in 200 components = 0.00506041 Jy ! Clean residual min=-0.001633 max=0.002178 Jy/beam ! Clean residual mean=-0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.46564 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.46564 Jy ! Inverting map ! Added new window around map position (0.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735748 Jy ! Component: 100 - total flux cleaned = 0.00117783 Jy ! Component: 150 - total flux cleaned = 0.00146812 Jy ! Component: 200 - total flux cleaned = 0.00157739 Jy ! Total flux subtracted in 200 components = 0.00157739 Jy ! Clean residual min=-0.001504 max=0.001630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.467218 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.467218 Jy ! Inverting map ! Added new window around map position (-1.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155832 Jy ! Component: 100 - total flux cleaned = 0.00165778 Jy ! Component: 150 - total flux cleaned = 0.00179554 Jy ! Component: 200 - total flux cleaned = 0.00188342 Jy ! Total flux subtracted in 200 components = 0.00188342 Jy ! Clean residual min=-0.001518 max=0.001488 Jy/beam ! Clean residual mean=-0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.469101 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 86 components and 0.469101 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.022 mas, bmaj=3.365 mas, bpa=-0.4628 degrees ! Estimated noise=0.447597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462141 Jy ! Component: 100 - total flux cleaned = 0.000807086 Jy ! Component: 150 - total flux cleaned = 0.00103747 Jy ! Component: 200 - total flux cleaned = 0.00115185 Jy ! Total flux subtracted in 200 components = 0.00115185 Jy ! Clean residual min=-0.001505 max=0.001844 Jy/beam ! Clean residual mean=-0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.470253 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126748 Jy ! Component: 100 - total flux cleaned = 7.9213e-05 Jy ! Component: 150 - total flux cleaned = 5.77104e-05 Jy ! Component: 200 - total flux cleaned = 7.81552e-05 Jy ! Total flux subtracted in 200 components = 7.81552e-05 Jy ! Clean residual min=-0.001510 max=0.001790 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.470331 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 136 components and 0.470331 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.786 mas, bmaj=1.93 mas, bpa=-2.636 degrees ! Estimated noise=0.327984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155214 Jy ! Component: 100 - total flux cleaned = -0.00019605 Jy ! Component: 150 - total flux cleaned = -0.00023048 Jy ! Component: 200 - total flux cleaned = -0.000296229 Jy ! Total flux subtracted in 200 components = -0.000296229 Jy ! Clean residual min=-0.001527 max=0.001480 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.470035 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 149 components and 0.470035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059217Jy sigma=1.047168 ! Fit after self-cal, rms=0.059210Jy sigma=1.047029 wmodel J1136-0330_X_a_map.mod ! Writing 149 model components to file: J1136-0330_X_a_map.mod wobs J1136-0330_X_a_uvs.fits ! Writing UV FITS file: J1136-0330_X_a_uvs.fits wwins J1136-0330_X_a_map.win ! wwins: Wrote 10 windows to J1136-0330_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212925 Jy ! Component: 100 - total flux cleaned = 0.000236834 Jy ! Component: 150 - total flux cleaned = 0.000213239 Jy ! Component: 200 - total flux cleaned = 0.000213077 Jy ! Component: 250 - total flux cleaned = 0.000235829 Jy ! Component: 300 - total flux cleaned = 0.000213158 Jy ! Component: 350 - total flux cleaned = 0.000124581 Jy ! Component: 400 - total flux cleaned = 0.000102456 Jy ! Component: 450 - total flux cleaned = 5.93554e-05 Jy ! Component: 500 - total flux cleaned = 5.9167e-05 Jy ! Component: 550 - total flux cleaned = 3.87408e-05 Jy ! Component: 600 - total flux cleaned = 0.000121486 Jy ! Component: 650 - total flux cleaned = 0.000101012 Jy ! Component: 700 - total flux cleaned = 0.000181656 Jy ! Component: 750 - total flux cleaned = 0.000181515 Jy ! Component: 800 - total flux cleaned = 0.000141856 Jy ! Component: 850 - total flux cleaned = 0.000200875 Jy ! Component: 900 - total flux cleaned = 0.000123169 Jy ! Component: 950 - total flux cleaned = 0.000181341 Jy ! Component: 1000 - total flux cleaned = 0.000142936 Jy ! Component: 1050 - total flux cleaned = 0.000143084 Jy ! Component: 1100 - total flux cleaned = 0.000162127 Jy ! Component: 1150 - total flux cleaned = 0.00010582 Jy ! Component: 1200 - total flux cleaned = 8.70268e-05 Jy ! Component: 1250 - total flux cleaned = 4.97453e-05 Jy ! Component: 1300 - total flux cleaned = -2.41577e-05 Jy ! Component: 1350 - total flux cleaned = -9.74909e-05 Jy ! Component: 1400 - total flux cleaned = -9.72849e-05 Jy ! Component: 1450 - total flux cleaned = -0.000115513 Jy ! Component: 1500 - total flux cleaned = -0.000169771 Jy ! Component: 1550 - total flux cleaned = -0.00011599 Jy ! Component: 1600 - total flux cleaned = -0.000258757 Jy ! Component: 1650 - total flux cleaned = -0.000223278 Jy ! Component: 1700 - total flux cleaned = -0.000241 Jy ! Component: 1750 - total flux cleaned = -0.000328809 Jy ! Component: 1800 - total flux cleaned = -0.000311332 Jy ! Component: 1850 - total flux cleaned = -0.000346052 Jy ! Component: 1900 - total flux cleaned = -0.00032872 Jy ! Component: 1950 - total flux cleaned = -0.000431857 Jy ! Component: 2000 - total flux cleaned = -0.000432008 Jy ! Component: 2050 - total flux cleaned = -0.000415098 Jy ! Component: 2100 - total flux cleaned = -0.000432066 Jy ! Component: 2150 - total flux cleaned = -0.000516277 Jy ! Component: 2200 - total flux cleaned = -0.000516136 Jy ! Component: 2250 - total flux cleaned = -0.00061607 Jy ! Component: 2300 - total flux cleaned = -0.000632851 Jy ! Component: 2350 - total flux cleaned = -0.00061642 Jy ! Component: 2400 - total flux cleaned = -0.000681841 Jy ! Component: 2450 - total flux cleaned = -0.000714705 Jy ! Component: 2500 - total flux cleaned = -0.000763582 Jy ! Component: 2550 - total flux cleaned = -0.000731037 Jy ! Component: 2600 - total flux cleaned = -0.000779432 Jy ! Component: 2650 - total flux cleaned = -0.00084389 Jy ! Component: 2700 - total flux cleaned = -0.000891803 Jy ! Component: 2750 - total flux cleaned = -0.000891856 Jy ! Component: 2800 - total flux cleaned = -0.0008918 Jy ! Component: 2850 - total flux cleaned = -0.00092332 Jy ! Component: 2900 - total flux cleaned = -0.000954849 Jy ! Component: 2950 - total flux cleaned = -0.000970636 Jy ! Component: 3000 - total flux cleaned = -0.000970506 Jy ! Component: 3050 - total flux cleaned = -0.00104828 Jy ! Component: 3100 - total flux cleaned = -0.0010173 Jy ! Component: 3150 - total flux cleaned = -0.00104824 Jy ! Component: 3200 - total flux cleaned = -0.00103286 Jy ! Component: 3250 - total flux cleaned = -0.00104802 Jy ! Component: 3300 - total flux cleaned = -0.00104809 Jy ! Component: 3350 - total flux cleaned = -0.00107835 Jy ! Component: 3400 - total flux cleaned = -0.00109337 Jy ! Component: 3450 - total flux cleaned = -0.00109345 Jy ! Component: 3500 - total flux cleaned = -0.00109329 Jy ! Component: 3550 - total flux cleaned = -0.00112318 Jy ! Component: 3600 - total flux cleaned = -0.00107849 Jy ! Component: 3650 - total flux cleaned = -0.00107849 Jy ! Component: 3700 - total flux cleaned = -0.00112286 Jy ! Component: 3750 - total flux cleaned = -0.00116701 Jy ! Component: 3800 - total flux cleaned = -0.00112301 Jy ! Component: 3850 - total flux cleaned = -0.00113766 Jy ! Component: 3900 - total flux cleaned = -0.00118126 Jy ! Component: 3950 - total flux cleaned = -0.00119569 Jy ! Component: 4000 - total flux cleaned = -0.00119575 Jy ! Component: 4050 - total flux cleaned = -0.00122456 Jy ! Total flux subtracted in 4096 components = -0.00118147 Jy ! Clean residual min=-0.000964 max=0.000736 Jy/beam ! Clean residual mean=-0.000000 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.468854 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 483 components and 0.468854 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1136-0330_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.786 x 1.93 at -2.636 degrees (North through East) ! Clean map min=-0.0012668 max=0.43333 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1136-0330_X_a_map.fits wmodel /vlbi/uf001/uvm//J1136-0330_X_a_map.mod ! Writing 483 model components to file: /vlbi/uf001/uvm//J1136-0330_X_a_map.mod wobs /vlbi/uf001/uvm//J1136-0330_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1136-0330_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1136-0330_X_a_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uvm//J1136-0330_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.433331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251445 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174078 0.174078 0.348156 0.696312 1.39262 2.78525 5.5705 11.141 22.282 44.564 89.128 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.433 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1723.36 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1136-0330_X_a_dfm.log closed on Sun Jan 13 21:29:47 2019