! Started logfile: /vlbi/uf001/uva//J1135-0428_S_dfm.log on Mon Jan 14 01:22:18 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1135-0428_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1135-0428_S_uva.fits ! AN table 1: 72 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.981481 visibilities/baseline/integration-bin. ! Found source: J1135-0428 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7632 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1135-0428_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.026258Jy sigma=18.588189 ! Fit after self-cal, rms=0.798431Jy sigma=14.623034 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.462 mas, bpa=-3.683 degrees ! Estimated noise=0.572745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157962 Jy ! Component: 100 - total flux cleaned = 0.192408 Jy ! Total flux subtracted in 100 components = 0.192408 Jy ! Clean residual min=-0.006541 max=0.009608 Jy/beam ! Clean residual mean=0.000002 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.192408 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.192408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087869Jy sigma=1.302137 ! Fit after self-cal, rms=0.087860Jy sigma=1.302084 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.421 mas, bpa=-3.843 degrees ! Estimated noise=0.457435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795677 Jy ! Component: 100 - total flux cleaned = 0.0108125 Jy ! Component: 150 - total flux cleaned = 0.0118774 Jy ! Component: 200 - total flux cleaned = 0.0121926 Jy ! Total flux subtracted in 200 components = 0.0121926 Jy ! Clean residual min=-0.005929 max=0.006576 Jy/beam ! Clean residual mean=-0.000012 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.2046 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.2046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086720Jy sigma=1.293586 ! Fit after self-cal, rms=0.086712Jy sigma=1.293554 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.93 x 7.421 at -3.843 degrees (North through East) ! Clean map min=-0.0058692 max=0.20201 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.97 KP 0.96 LA 0.93 ! MK 0.99 NL 1.03 OV 0.96 PT 1.10 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 0.98 KP 0.97 LA 0.94 ! MK 1.00 NL 1.09 OV 0.94 PT 1.10 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.98 KP 0.98 LA 0.93 ! MK 1.00 NL 1.05 OV 0.95 PT 1.16 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.086712Jy sigma=1.293554 ! Fit after self-cal, rms=0.085685Jy sigma=1.261527 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=7.44 mas, bpa=-3.956 degrees ! Estimated noise=0.458665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012286 Jy ! Component: 100 - total flux cleaned = 0.00143462 Jy ! Component: 150 - total flux cleaned = 0.00143548 Jy ! Component: 200 - total flux cleaned = 0.00146646 Jy ! Total flux subtracted in 200 components = 0.00146646 Jy ! Clean residual min=-0.006166 max=0.006311 Jy/beam ! Clean residual mean=-0.000009 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.206067 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.206067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085563Jy sigma=1.261355 ! Fit after self-cal, rms=0.085564Jy sigma=1.261135 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085564Jy sigma=1.261135 ! Fit after self-cal, rms=0.076358Jy sigma=1.188863 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.426 mas, bpa=-4.047 degrees ! Estimated noise=0.46421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245817 Jy ! Component: 100 - total flux cleaned = 0.00354564 Jy ! Component: 150 - total flux cleaned = 0.00401049 Jy ! Component: 200 - total flux cleaned = 0.00414545 Jy ! Total flux subtracted in 200 components = 0.00414545 Jy ! Clean residual min=-0.003801 max=0.003005 Jy/beam ! Clean residual mean=0.000001 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.210212 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.210212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076287Jy sigma=1.187293 ! Fit after self-cal, rms=0.076304Jy sigma=1.187090 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51444e-05 Jy ! Component: 100 - total flux cleaned = 0.000174387 Jy ! Component: 150 - total flux cleaned = 0.000251369 Jy ! Component: 200 - total flux cleaned = 0.000296827 Jy ! Total flux subtracted in 200 components = 0.000296827 Jy ! Clean residual min=-0.003830 max=0.002987 Jy/beam ! Clean residual mean=0.000001 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.210509 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.210509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076299Jy sigma=1.187005 ! Fit after self-cal, rms=0.076298Jy sigma=1.186998 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076298Jy sigma=1.186998 ! Fit after self-cal, rms=0.075770Jy sigma=1.168409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.428 mas, bpa=-4.064 degrees ! Estimated noise=0.463799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142858 Jy ! Component: 100 - total flux cleaned = -0.000151654 Jy ! Component: 150 - total flux cleaned = -0.000137905 Jy ! Component: 200 - total flux cleaned = -0.000118677 Jy ! Total flux subtracted in 200 components = -0.000118677 Jy ! Clean residual min=-0.001788 max=0.002022 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.21039 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.21039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075768Jy sigma=1.168384 ! Fit after self-cal, rms=0.075796Jy sigma=1.168270 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-112.5, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164747 Jy ! Component: 100 - total flux cleaned = 0.00185446 Jy ! Component: 150 - total flux cleaned = 0.00202501 Jy ! Component: 200 - total flux cleaned = 0.00216893 Jy ! Total flux subtracted in 200 components = 0.00216893 Jy ! Clean residual min=-0.001767 max=0.001773 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.212559 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.212559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075724Jy sigma=1.166934 ! Fit after self-cal, rms=0.075719Jy sigma=1.166841 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075719Jy sigma=1.166841 ! Fit after self-cal, rms=0.075762Jy sigma=1.166781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.744 mas, bmaj=12.86 mas, bpa=-4.239 degrees ! Estimated noise=0.635429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875179 Jy ! Component: 100 - total flux cleaned = 0.000898581 Jy ! Component: 150 - total flux cleaned = 0.000878555 Jy ! Component: 200 - total flux cleaned = 0.000842812 Jy ! Total flux subtracted in 200 components = 0.000842812 Jy ! Clean residual min=-0.001984 max=0.002060 Jy/beam ! Clean residual mean=0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.213402 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.213402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075746Jy sigma=1.166612 ! Fit after self-cal, rms=0.075746Jy sigma=1.166596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179916 Jy ! Component: 100 - total flux cleaned = 0.000148482 Jy ! Component: 150 - total flux cleaned = 0.000134151 Jy ! Component: 200 - total flux cleaned = 0.000134193 Jy ! Total flux subtracted in 200 components = 0.000134193 Jy ! Clean residual min=-0.001957 max=0.002029 Jy/beam ! Clean residual mean=0.000003 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.213536 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 103 components and 0.213536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075742Jy sigma=1.166565 ! Fit after self-cal, rms=0.075741Jy sigma=1.166563 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.431 mas, bpa=-4.077 degrees ! Estimated noise=0.463801 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.917 x 7.431 at -4.077 degrees (North through East) ! Clean map min=-0.0016906 max=0.20501 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=6.482 mas, bpa=-3.837 degrees ! Estimated noise=0.57888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159638 Jy ! Component: 100 - total flux cleaned = 0.194449 Jy ! Component: 150 - total flux cleaned = 0.202936 Jy ! Component: 200 - total flux cleaned = 0.206553 Jy ! Total flux subtracted in 200 components = 0.206553 Jy ! Clean residual min=-0.002710 max=0.002513 Jy/beam ! Clean residual mean=0.000002 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.206553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.206553 Jy ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.431 mas, bpa=-4.077 degrees ! Estimated noise=0.463801 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273803 Jy ! Component: 100 - total flux cleaned = 0.00403791 Jy ! Component: 150 - total flux cleaned = 0.00427397 Jy ! Component: 200 - total flux cleaned = 0.0045356 Jy ! Total flux subtracted in 200 components = 0.0045356 Jy ! Clean residual min=-0.001850 max=0.001856 Jy/beam ! Clean residual mean=0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.211089 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.211089 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.744 mas, bmaj=12.86 mas, bpa=-4.239 degrees ! Estimated noise=0.635429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182832 Jy ! Component: 100 - total flux cleaned = 0.00213918 Jy ! Component: 150 - total flux cleaned = 0.00242456 Jy ! Component: 200 - total flux cleaned = 0.0025138 Jy ! Total flux subtracted in 200 components = 0.0025138 Jy ! Clean residual min=-0.002016 max=0.002095 Jy/beam ! Clean residual mean=0.000003 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.213603 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39549e-05 Jy ! Component: 100 - total flux cleaned = -2.26989e-05 Jy ! Component: 150 - total flux cleaned = -4.37032e-05 Jy ! Component: 200 - total flux cleaned = -6.33141e-05 Jy ! Total flux subtracted in 200 components = -6.33141e-05 Jy ! Clean residual min=-0.001985 max=0.002059 Jy/beam ! Clean residual mean=0.000003 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.213539 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.213539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.431 mas, bpa=-4.077 degrees ! Estimated noise=0.463801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367756 Jy ! Component: 100 - total flux cleaned = -0.000335391 Jy ! Component: 150 - total flux cleaned = -0.00030619 Jy ! Component: 200 - total flux cleaned = -0.000277683 Jy ! Total flux subtracted in 200 components = -0.000277683 Jy ! Clean residual min=-0.001781 max=0.001710 Jy/beam ! Clean residual mean=0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.213262 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.213261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075748Jy sigma=1.166661 ! Fit after self-cal, rms=0.075746Jy sigma=1.166621 wmodel J1135-0428_S_map.mod ! Writing 71 model components to file: J1135-0428_S_map.mod wobs J1135-0428_S_uvs.fits ! Writing UV FITS file: J1135-0428_S_uvs.fits wwins J1135-0428_S_map.win ! wwins: Wrote 2 windows to J1135-0428_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.213e-05 Jy ! Component: 100 - total flux cleaned = -0.000101529 Jy ! Component: 150 - total flux cleaned = -0.000189353 Jy ! Component: 200 - total flux cleaned = -0.000246572 Jy ! Component: 250 - total flux cleaned = -5.41151e-05 Jy ! Component: 300 - total flux cleaned = 5.28914e-05 Jy ! Component: 350 - total flux cleaned = 0.000262308 Jy ! Component: 400 - total flux cleaned = 0.000390136 Jy ! Component: 450 - total flux cleaned = 0.000514858 Jy ! Component: 500 - total flux cleaned = 0.000733442 Jy ! Component: 550 - total flux cleaned = 0.000876538 Jy ! Component: 600 - total flux cleaned = 0.00101658 Jy ! Component: 650 - total flux cleaned = 0.00110845 Jy ! Component: 700 - total flux cleaned = 0.0011765 Jy ! Component: 750 - total flux cleaned = 0.00126602 Jy ! Component: 800 - total flux cleaned = 0.00137546 Jy ! Component: 850 - total flux cleaned = 0.00146136 Jy ! Component: 900 - total flux cleaned = 0.00154556 Jy ! Component: 950 - total flux cleaned = 0.00154516 Jy ! Component: 1000 - total flux cleaned = 0.00156571 Jy ! Component: 1050 - total flux cleaned = 0.00164668 Jy ! Component: 1100 - total flux cleaned = 0.00170652 Jy ! Component: 1150 - total flux cleaned = 0.00166692 Jy ! Component: 1200 - total flux cleaned = 0.00166736 Jy ! Component: 1250 - total flux cleaned = 0.00180224 Jy ! Component: 1300 - total flux cleaned = 0.00187815 Jy ! Component: 1350 - total flux cleaned = 0.00185937 Jy ! Component: 1400 - total flux cleaned = 0.00189657 Jy ! Component: 1450 - total flux cleaned = 0.00189661 Jy ! Component: 1500 - total flux cleaned = 0.00191477 Jy ! Component: 1550 - total flux cleaned = 0.00187906 Jy ! Component: 1600 - total flux cleaned = 0.00191427 Jy ! Component: 1650 - total flux cleaned = 0.00191405 Jy ! Component: 1700 - total flux cleaned = 0.00187918 Jy ! Component: 1750 - total flux cleaned = 0.00187914 Jy ! Component: 1800 - total flux cleaned = 0.00186207 Jy ! Component: 1850 - total flux cleaned = 0.00192955 Jy ! Component: 1900 - total flux cleaned = 0.00187958 Jy ! Component: 1950 - total flux cleaned = 0.0019128 Jy ! Component: 2000 - total flux cleaned = 0.00189641 Jy ! Component: 2050 - total flux cleaned = 0.00194521 Jy ! Component: 2100 - total flux cleaned = 0.00196116 Jy ! Component: 2150 - total flux cleaned = 0.00191321 Jy ! Component: 2200 - total flux cleaned = 0.00191321 Jy ! Component: 2250 - total flux cleaned = 0.00196019 Jy ! Component: 2300 - total flux cleaned = 0.00194452 Jy ! Component: 2350 - total flux cleaned = 0.00191369 Jy ! Component: 2400 - total flux cleaned = 0.00189827 Jy ! Component: 2450 - total flux cleaned = 0.00191356 Jy ! Component: 2500 - total flux cleaned = 0.00192852 Jy ! Component: 2550 - total flux cleaned = 0.00197326 Jy ! Component: 2600 - total flux cleaned = 0.00194364 Jy ! Component: 2650 - total flux cleaned = 0.00195828 Jy ! Component: 2700 - total flux cleaned = 0.00194368 Jy ! Component: 2750 - total flux cleaned = 0.00197234 Jy ! Component: 2800 - total flux cleaned = 0.00197206 Jy ! Component: 2850 - total flux cleaned = 0.00188687 Jy ! Component: 2900 - total flux cleaned = 0.001887 Jy ! Component: 2950 - total flux cleaned = 0.00191499 Jy ! Component: 3000 - total flux cleaned = 0.00187353 Jy ! Component: 3050 - total flux cleaned = 0.00184605 Jy ! Component: 3100 - total flux cleaned = 0.00185971 Jy ! Component: 3150 - total flux cleaned = 0.00179176 Jy ! Component: 3200 - total flux cleaned = 0.00181872 Jy ! Component: 3250 - total flux cleaned = 0.00176491 Jy ! Component: 3300 - total flux cleaned = 0.00173829 Jy ! Component: 3350 - total flux cleaned = 0.00165919 Jy ! Component: 3400 - total flux cleaned = 0.0016856 Jy ! Component: 3450 - total flux cleaned = 0.00168571 Jy ! Component: 3500 - total flux cleaned = 0.00169872 Jy ! Component: 3550 - total flux cleaned = 0.00162162 Jy ! Component: 3600 - total flux cleaned = 0.00160881 Jy ! Component: 3650 - total flux cleaned = 0.00157076 Jy ! Component: 3700 - total flux cleaned = 0.00158336 Jy ! Component: 3750 - total flux cleaned = 0.00155831 Jy ! Component: 3800 - total flux cleaned = 0.00159553 Jy ! Component: 3850 - total flux cleaned = 0.00164485 Jy ! Component: 3900 - total flux cleaned = 0.00163262 Jy ! Component: 3950 - total flux cleaned = 0.00163268 Jy ! Component: 4000 - total flux cleaned = 0.00168112 Jy ! Component: 4050 - total flux cleaned = 0.00163303 Jy ! Total flux subtracted in 4096 components = 0.00170484 Jy ! Clean residual min=-0.000749 max=0.000706 Jy/beam ! Clean residual mean=0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.214966 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 355 components and 0.214966 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1135-0428_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.917 x 7.431 at -4.077 degrees (North through East) ! Clean map min=-0.0013845 max=0.20471 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1135-0428_S_map.fits wmodel /vlbi/uf001/uva//J1135-0428_S_map.mod ! Writing 355 model components to file: /vlbi/uf001/uva//J1135-0428_S_map.mod wobs /vlbi/uf001/uva//J1135-0428_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1135-0428_S_uvs.fits wwins /vlbi/uf001/uva//J1135-0428_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1135-0428_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.204708 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211743 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310309 0.310309 0.620618 1.24124 2.48247 4.96494 9.92989 19.8598 39.7196 79.4391 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.204 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 966.778 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1135-0428_S_dfm.log closed on Mon Jan 14 01:22:22 2019