! Started logfile: /vlbi/uf001/uva//J1130-3608_S_dfm.log on Mon Jan 14 01:20:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1130-3608_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1130-3608_S_uva.fits ! AN table 1: 62 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.850998 visibilities/baseline/integration-bin. ! Found source: J1130-3608 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3324 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1130-3608_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.018435Jy sigma=13.422109 ! Fit after self-cal, rms=0.898337Jy sigma=11.786566 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.635 mas, bmaj=56.06 mas, bpa=-2.717 degrees ! Estimated noise=1.24519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826199 Jy ! Component: 100 - total flux cleaned = 0.104304 Jy ! Total flux subtracted in 100 components = 0.104304 Jy ! Clean residual min=-0.006718 max=0.009009 Jy/beam ! Clean residual mean=0.000087 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.104304 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.104304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101803Jy sigma=1.232258 ! Fit after self-cal, rms=0.101325Jy sigma=1.228070 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.67 mas, bmaj=57.92 mas, bpa=-3.653 degrees ! Estimated noise=0.95883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108802 Jy ! Component: 100 - total flux cleaned = 0.0150069 Jy ! Component: 150 - total flux cleaned = 0.0154365 Jy ! Component: 200 - total flux cleaned = 0.0149663 Jy ! Total flux subtracted in 200 components = 0.0149663 Jy ! Clean residual min=-0.004984 max=0.005901 Jy/beam ! Clean residual mean=0.000128 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.119271 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 75 components and 0.119271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100367Jy sigma=1.212344 ! Fit after self-cal, rms=0.100355Jy sigma=1.211918 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.67 x 57.92 at -3.653 degrees (North through East) ! Clean map min=-0.004984 max=0.10865 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.04 KP 1.00 LA 0.89 ! NL 1.18 OV 0.95 PT 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.05 KP 1.04 LA 0.88 ! NL 1.07 OV 0.86 PT 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.07 KP 0.97 LA 1.01 ! NL 1.01 OV 0.92 PT 1.06 ! ! ! Fit before self-cal, rms=0.100355Jy sigma=1.211918 ! Fit after self-cal, rms=0.102055Jy sigma=1.200502 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.734 mas, bmaj=57.74 mas, bpa=-3.505 degrees ! Estimated noise=0.951396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0004186 Jy ! Component: 100 - total flux cleaned = -0.000151776 Jy ! Component: 150 - total flux cleaned = -9.71488e-05 Jy ! Component: 200 - total flux cleaned = -5.00548e-05 Jy ! Total flux subtracted in 200 components = -5.00548e-05 Jy ! Clean residual min=-0.003739 max=0.004196 Jy/beam ! Clean residual mean=0.000079 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.119221 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.119221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101953Jy sigma=1.199729 ! Fit after self-cal, rms=0.102135Jy sigma=1.198953 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102135Jy sigma=1.198953 ! Fit after self-cal, rms=0.103499Jy sigma=1.196154 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.741 mas, bmaj=57.69 mas, bpa=-3.497 degrees ! Estimated noise=0.956171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.65955e-05 Jy ! Component: 100 - total flux cleaned = 2.9219e-05 Jy ! Component: 150 - total flux cleaned = 7.00885e-05 Jy ! Component: 200 - total flux cleaned = 7.00677e-05 Jy ! Total flux subtracted in 200 components = 7.00677e-05 Jy ! Clean residual min=-0.003279 max=0.003724 Jy/beam ! Clean residual mean=0.000060 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.119291 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 0.119291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103447Jy sigma=1.195819 ! Fit after self-cal, rms=0.103485Jy sigma=1.195732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001359 Jy ! Component: 100 - total flux cleaned = -0.000174444 Jy ! Component: 150 - total flux cleaned = -0.000142244 Jy ! Component: 200 - total flux cleaned = -0.000142157 Jy ! Total flux subtracted in 200 components = -0.000142157 Jy ! Clean residual min=-0.003248 max=0.003722 Jy/beam ! Clean residual mean=0.000060 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.119149 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 144 components and 0.119149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103449Jy sigma=1.195549 ! Fit after self-cal, rms=0.103446Jy sigma=1.195515 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103446Jy sigma=1.195515 ! Fit after self-cal, rms=0.104165Jy sigma=1.193670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.724 mas, bmaj=57.8 mas, bpa=-3.494 degrees ! Estimated noise=0.956435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129229 Jy ! Component: 100 - total flux cleaned = 2.68486e-05 Jy ! Component: 150 - total flux cleaned = -0.000125117 Jy ! Component: 200 - total flux cleaned = -0.000236398 Jy ! Total flux subtracted in 200 components = -0.000236398 Jy ! Clean residual min=-0.002842 max=0.003452 Jy/beam ! Clean residual mean=0.000039 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.118912 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 156 components and 0.118912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104140Jy sigma=1.193463 ! Fit after self-cal, rms=0.104187Jy sigma=1.193345 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163107 Jy ! Component: 100 - total flux cleaned = -0.000271408 Jy ! Component: 150 - total flux cleaned = -0.000370972 Jy ! Component: 200 - total flux cleaned = -0.000418303 Jy ! Total flux subtracted in 200 components = -0.000418303 Jy ! Clean residual min=-0.002834 max=0.003342 Jy/beam ! Clean residual mean=0.000038 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.118494 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 0.118494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104168Jy sigma=1.193222 ! Fit after self-cal, rms=0.104166Jy sigma=1.193202 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104166Jy sigma=1.193202 ! Fit after self-cal, rms=0.104235Jy sigma=1.193182 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.349 mas, bmaj=58.42 mas, bpa=-3.196 degrees ! Estimated noise=0.970071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000566152 Jy ! Component: 100 - total flux cleaned = -0.000675666 Jy ! Component: 150 - total flux cleaned = -0.000773541 Jy ! Component: 200 - total flux cleaned = -0.000862812 Jy ! Total flux subtracted in 200 components = -0.000862812 Jy ! Clean residual min=-0.002700 max=0.003157 Jy/beam ! Clean residual mean=0.000045 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.117631 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 182 components and 0.117631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104229Jy sigma=1.193050 ! Fit after self-cal, rms=0.104231Jy sigma=1.193033 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216827 Jy ! Component: 100 - total flux cleaned = -0.000285139 Jy ! Component: 150 - total flux cleaned = -0.000347821 Jy ! Component: 200 - total flux cleaned = -0.00039064 Jy ! Total flux subtracted in 200 components = -0.00039064 Jy ! Clean residual min=-0.002651 max=0.003132 Jy/beam ! Clean residual mean=0.000043 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.11724 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 192 components and 0.11724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104227Jy sigma=1.192958 ! Fit after self-cal, rms=0.104224Jy sigma=1.192947 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=6.717 mas, bmaj=57.86 mas, bpa=-3.484 degrees ! Estimated noise=0.95694 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.717 x 57.86 at -3.484 degrees (North through East) ! Clean map min=-0.0029977 max=0.10798 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.664 mas, bmaj=55.82 mas, bpa=-2.578 degrees ! Estimated noise=1.23763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820306 Jy ! Component: 100 - total flux cleaned = 0.104145 Jy ! Component: 150 - total flux cleaned = 0.11387 Jy ! Component: 200 - total flux cleaned = 0.11809 Jy ! Total flux subtracted in 200 components = 0.11809 Jy ! Clean residual min=-0.004030 max=0.004328 Jy/beam ! Clean residual mean=0.000044 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.11809 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.11809 Jy ! Inverting map and beam ! Estimated beam: bmin=6.717 mas, bmaj=57.86 mas, bpa=-3.484 degrees ! Estimated noise=0.95694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180908 Jy ! Component: 100 - total flux cleaned = 0.00107447 Jy ! Component: 150 - total flux cleaned = 0.000848632 Jy ! Component: 200 - total flux cleaned = 0.000780662 Jy ! Total flux subtracted in 200 components = 0.000780662 Jy ! Clean residual min=-0.003293 max=0.003733 Jy/beam ! Clean residual mean=0.000046 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.118871 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 88 components and 0.118871 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.349 mas, bmaj=58.42 mas, bpa=-3.196 degrees ! Estimated noise=0.970071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267614 Jy ! Component: 100 - total flux cleaned = -0.000719562 Jy ! Component: 150 - total flux cleaned = -0.000900296 Jy ! Component: 200 - total flux cleaned = -0.00103466 Jy ! Total flux subtracted in 200 components = -0.00103466 Jy ! Clean residual min=-0.003066 max=0.003202 Jy/beam ! Clean residual mean=0.000050 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.117836 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.37645e-05 Jy ! Component: 100 - total flux cleaned = -0.000153067 Jy ! Component: 150 - total flux cleaned = -0.000209279 Jy ! Component: 200 - total flux cleaned = -0.000262734 Jy ! Total flux subtracted in 200 components = -0.000262734 Jy ! Clean residual min=-0.002891 max=0.003200 Jy/beam ! Clean residual mean=0.000047 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.117573 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 133 components and 0.117573 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.717 mas, bmaj=57.86 mas, bpa=-3.484 degrees ! Estimated noise=0.95694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407767 Jy ! Component: 100 - total flux cleaned = 0.00062222 Jy ! Component: 150 - total flux cleaned = 0.000738667 Jy ! Component: 200 - total flux cleaned = 0.000775279 Jy ! Total flux subtracted in 200 components = 0.000775279 Jy ! Clean residual min=-0.002656 max=0.003364 Jy/beam ! Clean residual mean=0.000039 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.118349 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 140 components and 0.118349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104248Jy sigma=1.193309 ! Fit after self-cal, rms=0.104250Jy sigma=1.193207 wmodel J1130-3608_S_map.mod ! Writing 140 model components to file: J1130-3608_S_map.mod wobs J1130-3608_S_uvs.fits ! Writing UV FITS file: J1130-3608_S_uvs.fits wwins J1130-3608_S_map.win ! wwins: Wrote 1 windows to J1130-3608_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148281 Jy ! Component: 100 - total flux cleaned = 0.00257197 Jy ! Component: 150 - total flux cleaned = 0.00338607 Jy ! Component: 200 - total flux cleaned = 0.00405497 Jy ! Component: 250 - total flux cleaned = 0.00472062 Jy ! Component: 300 - total flux cleaned = 0.0052296 Jy ! Component: 350 - total flux cleaned = 0.00589975 Jy ! Component: 400 - total flux cleaned = 0.00646937 Jy ! Component: 450 - total flux cleaned = 0.006946 Jy ! Component: 500 - total flux cleaned = 0.00753463 Jy ! Component: 550 - total flux cleaned = 0.00804146 Jy ! Component: 600 - total flux cleaned = 0.00859692 Jy ! Component: 650 - total flux cleaned = 0.00904723 Jy ! Component: 700 - total flux cleaned = 0.00954366 Jy ! Component: 750 - total flux cleaned = 0.00991368 Jy ! Component: 800 - total flux cleaned = 0.0101366 Jy ! Component: 850 - total flux cleaned = 0.0103827 Jy ! Component: 900 - total flux cleaned = 0.0106235 Jy ! Component: 950 - total flux cleaned = 0.0108073 Jy ! Component: 1000 - total flux cleaned = 0.0109879 Jy ! Component: 1050 - total flux cleaned = 0.0112152 Jy ! Component: 1100 - total flux cleaned = 0.0114127 Jy ! Component: 1150 - total flux cleaned = 0.0116068 Jy ! Component: 1200 - total flux cleaned = 0.0117981 Jy ! Component: 1250 - total flux cleaned = 0.0119866 Jy ! Component: 1300 - total flux cleaned = 0.0121495 Jy ! Component: 1350 - total flux cleaned = 0.012333 Jy ! Component: 1400 - total flux cleaned = 0.0124917 Jy ! Component: 1450 - total flux cleaned = 0.0126703 Jy ! Component: 1500 - total flux cleaned = 0.0128247 Jy ! Component: 1550 - total flux cleaned = 0.0129557 Jy ! Component: 1600 - total flux cleaned = 0.0131286 Jy ! Component: 1650 - total flux cleaned = 0.0132993 Jy ! Component: 1700 - total flux cleaned = 0.0134469 Jy ! Component: 1750 - total flux cleaned = 0.013655 Jy ! Component: 1800 - total flux cleaned = 0.0137374 Jy ! Component: 1850 - total flux cleaned = 0.0139001 Jy ! Component: 1900 - total flux cleaned = 0.0139601 Jy ! Component: 1950 - total flux cleaned = 0.0140599 Jy ! Component: 2000 - total flux cleaned = 0.0141585 Jy ! Component: 2050 - total flux cleaned = 0.0143924 Jy ! Component: 2100 - total flux cleaned = 0.014489 Jy ! Component: 2150 - total flux cleaned = 0.0145848 Jy ! Component: 2200 - total flux cleaned = 0.0147177 Jy ! Component: 2250 - total flux cleaned = 0.0147933 Jy ! Component: 2300 - total flux cleaned = 0.014887 Jy ! Component: 2350 - total flux cleaned = 0.0149799 Jy ! Component: 2400 - total flux cleaned = 0.0151092 Jy ! Component: 2450 - total flux cleaned = 0.0151824 Jy ! Component: 2500 - total flux cleaned = 0.0153097 Jy ! Component: 2550 - total flux cleaned = 0.0153819 Jy ! Component: 2600 - total flux cleaned = 0.0154717 Jy ! Component: 2650 - total flux cleaned = 0.0156501 Jy ! Component: 2700 - total flux cleaned = 0.0157742 Jy ! Component: 2750 - total flux cleaned = 0.0158623 Jy ! Component: 2800 - total flux cleaned = 0.0159501 Jy ! Component: 2850 - total flux cleaned = 0.0160545 Jy ! Component: 2900 - total flux cleaned = 0.0161585 Jy ! Component: 2950 - total flux cleaned = 0.0162964 Jy ! Component: 3000 - total flux cleaned = 0.0163478 Jy ! Component: 3050 - total flux cleaned = 0.0165356 Jy ! Component: 3100 - total flux cleaned = 0.0166373 Jy ! Component: 3150 - total flux cleaned = 0.0167219 Jy ! Component: 3200 - total flux cleaned = 0.016806 Jy ! Component: 3250 - total flux cleaned = 0.0169064 Jy ! Component: 3300 - total flux cleaned = 0.0170064 Jy ! Component: 3350 - total flux cleaned = 0.0170894 Jy ! Component: 3400 - total flux cleaned = 0.017172 Jy ! Component: 3450 - total flux cleaned = 0.0172544 Jy ! Component: 3500 - total flux cleaned = 0.0173036 Jy ! Component: 3550 - total flux cleaned = 0.0173855 Jy ! Component: 3600 - total flux cleaned = 0.0174182 Jy ! Component: 3650 - total flux cleaned = 0.0174834 Jy ! Component: 3700 - total flux cleaned = 0.0174996 Jy ! Component: 3750 - total flux cleaned = 0.0175484 Jy ! Component: 3800 - total flux cleaned = 0.0176618 Jy ! Component: 3850 - total flux cleaned = 0.0176457 Jy ! Component: 3900 - total flux cleaned = 0.0177427 Jy ! Component: 3950 - total flux cleaned = 0.0178234 Jy ! Component: 4000 - total flux cleaned = 0.0178879 Jy ! Component: 4050 - total flux cleaned = 0.0179362 Jy ! Total flux subtracted in 4096 components = 0.0180168 Jy ! Clean residual min=-0.000866 max=0.001133 Jy/beam ! Clean residual mean=-0.000002 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.136365 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 490 components and 0.136365 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1130-3608_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.717 x 57.86 at -3.484 degrees (North through East) ! Clean map min=-0.0022829 max=0.10815 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1130-3608_S_map.fits wmodel /vlbi/uf001/uva//J1130-3608_S_map.mod ! Writing 490 model components to file: /vlbi/uf001/uva//J1130-3608_S_map.mod wobs /vlbi/uf001/uva//J1130-3608_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1130-3608_S_uvs.fits wwins /vlbi/uf001/uva//J1130-3608_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1130-3608_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.108151 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946612 0.946612 1.89322 3.78645 7.5729 15.1458 30.2916 60.5832 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.108 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 316.919 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1130-3608_S_dfm.log closed on Mon Jan 14 01:21:02 2019