! Started logfile: /vlbi/uf001/uvm//J1130+3815_X_a_dfm.log on Sun Jan 13 21:28:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1130+3815_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1130+3815_X_a_uvm.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! AN table 2: 4 integrations on 36 of 36 possible baselines. ! AN table 3: 4 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.75731 visibilities/baseline/integration-bin. ! Found source: J1130+3815 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 12432 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1130+3815_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.446520Jy sigma=20.495586 ! Fit after self-cal, rms=0.250547Jy sigma=3.656287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7879 mas, bmaj=1.159 mas, bpa=9.166 degrees ! Estimated noise=0.617629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.73162 Jy ! Component: 100 - total flux cleaned = 0.930191 Jy ! Total flux subtracted in 100 components = 0.930191 Jy ! Clean residual min=-0.034148 max=0.081816 Jy/beam ! Clean residual mean=-0.000021 rms=0.005823 Jy/beam ! Combined flux in latest and established models = 0.930191 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.930191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.255149Jy sigma=3.600062 ! Fit after self-cal, rms=0.254996Jy sigma=3.598290 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867491 Jy ! Component: 100 - total flux cleaned = 0.128669 Jy ! Total flux subtracted in 100 components = 0.128669 Jy ! Clean residual min=-0.026414 max=0.037706 Jy/beam ! Clean residual mean=-0.000021 rms=0.004863 Jy/beam ! Combined flux in latest and established models = 1.05886 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 1.05886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.212650Jy sigma=2.984621 ! Fit after self-cal, rms=0.212369Jy sigma=2.981115 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363347 Jy ! Component: 100 - total flux cleaned = 0.0598712 Jy ! Total flux subtracted in 100 components = 0.0598712 Jy ! Clean residual min=-0.028168 max=0.032298 Jy/beam ! Clean residual mean=-0.000020 rms=0.004662 Jy/beam ! Combined flux in latest and established models = 1.11873 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 1.11873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200817Jy sigma=2.826319 ! Fit after self-cal, rms=0.200237Jy sigma=2.816930 ! Inverting map ! Added new window around map position (0, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287646 Jy ! Component: 100 - total flux cleaned = 0.0469178 Jy ! Total flux subtracted in 100 components = 0.0469178 Jy ! Clean residual min=-0.029212 max=0.026983 Jy/beam ! Clean residual mean=-0.000020 rms=0.004519 Jy/beam ! Combined flux in latest and established models = 1.16565 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 1.16565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.193436Jy sigma=2.728140 ! Fit after self-cal, rms=0.193196Jy sigma=2.723699 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=1.464 mas, bpa=10.07 degrees ! Estimated noise=0.455678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383505 Jy ! Component: 100 - total flux cleaned = 0.062524 Jy ! Component: 150 - total flux cleaned = 0.0806591 Jy ! Component: 200 - total flux cleaned = 0.0947892 Jy ! Total flux subtracted in 200 components = 0.0947892 Jy ! Clean residual min=-0.024789 max=0.025229 Jy/beam ! Clean residual mean=-0.000091 rms=0.005380 Jy/beam ! Combined flux in latest and established models = 1.26044 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 1.26044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182968Jy sigma=2.602061 ! Fit after self-cal, rms=0.182616Jy sigma=2.596920 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 1.464 at 10.07 degrees (North through East) ! Clean map min=-0.023377 max=0.97022 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.97 KP 1.10 ! LA 0.80 MK 0.94 NL 1.06 OV 0.94 ! PT 1.01 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.93 KP 1.05 ! LA 0.97 MK 1.05 NL 1.06 OV 0.91 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 KP 1.04 LA 1.57 ! MK 0.99 NL 1.07 OV 0.90 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.98 KP 1.08 ! LA 0.80 MK 0.95 NL 1.05 OV 0.95 ! PT 1.01 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 HN 0.97 KP 1.05 ! LA 0.99 MK 1.03 NL 1.06 OV 0.90 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.97 KP 1.02 LA 1.65 ! MK 0.99 NL 1.06 OV 0.90 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.97 KP 1.09 ! LA 0.80 MK 0.97 NL 1.07 OV 0.94 ! PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.98 KP 1.05 ! LA 0.98 MK 1.03 NL 1.06 OV 0.89 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 KP 1.02 LA 1.62 ! MK 0.98 NL 1.07 OV 0.91 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.97 KP 1.09 ! LA 0.80 MK 0.95 NL 1.06 OV 0.94 ! PT 0.99 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 0.98 KP 1.03 ! LA 0.98 MK 1.01 NL 1.06 OV 0.90 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.97 KP 1.04 LA 1.61 ! MK 0.98 NL 1.08 OV 0.92 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.98 KP 1.08 ! LA 0.81 MK 0.94 NL 1.05 OV 0.94 ! PT 1.01 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.00 HN 0.96 KP 1.06 ! LA 0.96 MK 1.04 NL 1.07 OV 0.89 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.98 KP 1.04 LA 1.63 ! MK 0.97 NL 1.08 OV 0.90 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 1.00 KP 1.10 ! LA 0.80 MK 0.95 NL 1.05 OV 0.93 ! PT 0.98 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.98 KP 1.03 ! LA 0.97 MK 1.03 NL 1.06 OV 0.89 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.98 KP 1.00 LA 1.63 ! MK 0.98 NL 1.10 OV 0.90 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.99 KP 1.08 ! LA 0.79 MK 0.94 NL 1.06 OV 0.94 ! PT 1.00 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.98 KP 1.06 ! LA 0.95 MK 1.03 NL 1.06 OV 0.90 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 KP 1.04 LA 1.58 ! MK 0.98 NL 1.09 OV 0.89 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 1.07 ! LA 0.78 MK 0.94 NL 1.05 OV 0.94 ! PT 0.99 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 0.97 KP 1.04 ! LA 0.98 MK 1.03 NL 1.04 OV 0.90 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.99 KP 1.05 LA 1.61 ! MK 0.99 NL 1.06 OV 0.89 PT 0.95 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 0.97 KP 1.08 ! LA 0.80 MK 0.93 NL 1.06 OV 0.93 ! PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.99 KP 1.02 ! LA 0.98 MK 1.03 NL 1.06 OV 0.89 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.00 KP 1.04 LA 1.61 ! MK 0.95 NL 1.08 OV 0.90 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 1.09 ! LA 0.80 MK 0.95 NL 1.05 OV 0.94 ! PT 1.00 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.94 KP 1.03 ! LA 0.98 MK 1.04 NL 1.07 OV 0.89 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 KP 1.02 LA 1.60 ! MK 0.98 NL 1.08 OV 0.90 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 0.98 KP 1.08 ! LA 0.80 MK 0.98 NL 1.05 OV 0.93 ! PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.98 KP 1.06 ! LA 0.97 MK 1.03 NL 1.07 OV 0.88 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 KP 1.03 LA 1.61 ! MK 1.01 NL 1.08 OV 0.90 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 0.98 KP 1.09 ! LA 0.81 MK 0.98 NL 1.06 OV 0.93 ! PT 1.02 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.00 KP 1.04 ! LA 0.95 MK 1.01 NL 1.07 OV 0.92 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 KP 1.04 LA 1.60 ! MK 0.98 NL 1.12 OV 0.89 PT 0.95 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.182616Jy sigma=2.596920 ! Fit after self-cal, rms=0.111748Jy sigma=1.415405 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.47 mas, bpa=8.723 degrees ! Estimated noise=0.454843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0160916 Jy ! Component: 100 - total flux cleaned = -0.0232944 Jy ! Component: 150 - total flux cleaned = -0.0265925 Jy ! Component: 200 - total flux cleaned = -0.028502 Jy ! Total flux subtracted in 200 components = -0.028502 Jy ! Clean residual min=-0.011589 max=0.013899 Jy/beam ! Clean residual mean=-0.000009 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 1.23194 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 1.23194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108114Jy sigma=1.368374 ! Fit after self-cal, rms=0.108129Jy sigma=1.366684 ! Inverting map ! Added new window around map position (0, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104115 Jy ! Component: 100 - total flux cleaned = 0.0107554 Jy ! Component: 150 - total flux cleaned = 0.0107526 Jy ! Component: 200 - total flux cleaned = 0.0107608 Jy ! Total flux subtracted in 200 components = 0.0107608 Jy ! Clean residual min=-0.011439 max=0.010617 Jy/beam ! Clean residual mean=-0.000003 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 1.2427 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 1.2427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105843Jy sigma=1.335701 ! Fit after self-cal, rms=0.105705Jy sigma=1.333801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105705Jy sigma=1.333801 ! Fit after self-cal, rms=0.088540Jy sigma=1.086937 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=1.476 mas, bpa=9.55 degrees ! Estimated noise=0.455744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00863968 Jy ! Component: 100 - total flux cleaned = -0.01081 Jy ! Component: 150 - total flux cleaned = -0.013162 Jy ! Component: 200 - total flux cleaned = -0.0151477 Jy ! Total flux subtracted in 200 components = -0.0151477 Jy ! Clean residual min=-0.007118 max=0.006560 Jy/beam ! Clean residual mean=-0.000011 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 1.22755 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 1.22755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086550Jy sigma=1.055601 ! Fit after self-cal, rms=0.086499Jy sigma=1.054807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124641 Jy ! Component: 100 - total flux cleaned = -0.00232341 Jy ! Component: 150 - total flux cleaned = -0.00265147 Jy ! Component: 200 - total flux cleaned = -0.00295628 Jy ! Total flux subtracted in 200 components = -0.00295628 Jy ! Clean residual min=-0.006661 max=0.006307 Jy/beam ! Clean residual mean=-0.000013 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 1.22459 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 1.22459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085856Jy sigma=1.045207 ! Fit after self-cal, rms=0.085834Jy sigma=1.044984 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085834Jy sigma=1.044984 ! Fit after self-cal, rms=0.076438Jy sigma=0.933828 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9994 mas, bmaj=1.477 mas, bpa=9.592 degrees ! Estimated noise=0.455822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00568982 Jy ! Component: 100 - total flux cleaned = -0.00749265 Jy ! Component: 150 - total flux cleaned = -0.00941167 Jy ! Component: 200 - total flux cleaned = -0.0108918 Jy ! Total flux subtracted in 200 components = -0.0108918 Jy ! Clean residual min=-0.005457 max=0.005644 Jy/beam ! Clean residual mean=-0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 1.2137 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 1.2137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075319Jy sigma=0.915700 ! Fit after self-cal, rms=0.075282Jy sigma=0.915265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611683 Jy ! Component: 100 - total flux cleaned = -0.0018632 Jy ! Component: 150 - total flux cleaned = -0.00336536 Jy ! Component: 200 - total flux cleaned = -0.00430778 Jy ! Total flux subtracted in 200 components = -0.00430778 Jy ! Clean residual min=-0.005022 max=0.004198 Jy/beam ! Clean residual mean=-0.000005 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 1.20939 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 1.20939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074455Jy sigma=0.902378 ! Fit after self-cal, rms=0.074431Jy sigma=0.901919 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074431Jy sigma=0.901919 ! Fit after self-cal, rms=0.074138Jy sigma=0.897193 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=2.549 mas, bpa=11.45 degrees ! Estimated noise=0.580676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00500803 Jy ! Component: 100 - total flux cleaned = -0.00634369 Jy ! Component: 150 - total flux cleaned = -0.0075456 Jy ! Component: 200 - total flux cleaned = -0.008542 Jy ! Total flux subtracted in 200 components = -0.008542 Jy ! Clean residual min=-0.003958 max=0.003257 Jy/beam ! Clean residual mean=-0.000010 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 1.20085 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 1.20085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073850Jy sigma=0.893534 ! Fit after self-cal, rms=0.073847Jy sigma=0.893388 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000902121 Jy ! Component: 100 - total flux cleaned = -0.00150299 Jy ! Component: 150 - total flux cleaned = -0.00197608 Jy ! Component: 200 - total flux cleaned = -0.0021922 Jy ! Total flux subtracted in 200 components = -0.0021922 Jy ! Clean residual min=-0.003813 max=0.003194 Jy/beam ! Clean residual mean=-0.000013 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 1.19866 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 147 components and 1.19866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073795Jy sigma=0.892767 ! Fit after self-cal, rms=0.073795Jy sigma=0.892697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9982 mas, bmaj=1.476 mas, bpa=9.615 degrees ! Estimated noise=0.456162 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9982 x 1.476 at 9.615 degrees (North through East) ! Clean map min=-0.0050306 max=0.97624 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073795Jy sigma=0.892697 ! Fit after self-cal, rms=0.070455Jy sigma=0.834924 ! Inverting map and beam ! Estimated beam: bmin=0.9993 mas, bmaj=1.477 mas, bpa=9.558 degrees ! Estimated noise=0.457107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229371 Jy ! Component: 100 - total flux cleaned = -0.00319642 Jy ! Component: 150 - total flux cleaned = -0.00384872 Jy ! Component: 200 - total flux cleaned = -0.00420832 Jy ! Total flux subtracted in 200 components = -0.00420832 Jy ! Clean residual min=-0.004332 max=0.003706 Jy/beam ! Clean residual mean=-0.000003 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 1.19445 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 159 components and 1.19445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069944Jy sigma=0.825941 ! Fit after self-cal, rms=0.069938Jy sigma=0.825836 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435581 Jy ! Component: 100 - total flux cleaned = -0.000752248 Jy ! Component: 150 - total flux cleaned = -0.00105484 Jy ! Component: 200 - total flux cleaned = -0.00134274 Jy ! Total flux subtracted in 200 components = -0.00134274 Jy ! Clean residual min=-0.004149 max=0.003599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 1.19311 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 166 components and 1.19311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069677Jy sigma=0.821265 ! Fit after self-cal, rms=0.069674Jy sigma=0.821205 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069674Jy sigma=0.821205 ! Fit after self-cal, rms=0.069590Jy sigma=0.819220 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7768 mas, bmaj=1.168 mas, bpa=8.804 degrees ! Estimated noise=0.621991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.736289 Jy ! Component: 100 - total flux cleaned = 0.933096 Jy ! Component: 150 - total flux cleaned = 1.02278 Jy ! Component: 200 - total flux cleaned = 1.07101 Jy ! Total flux subtracted in 200 components = 1.07101 Jy ! Clean residual min=-0.011749 max=0.023367 Jy/beam ! Clean residual mean=-0.000003 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 1.07101 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.07101 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9983 mas, bmaj=1.476 mas, bpa=9.569 degrees ! Estimated noise=0.457443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395233 Jy ! Component: 100 - total flux cleaned = 0.0634402 Jy ! Component: 150 - total flux cleaned = 0.0805446 Jy ! Component: 200 - total flux cleaned = 0.0931126 Jy ! Total flux subtracted in 200 components = 0.0931126 Jy ! Clean residual min=-0.005216 max=0.010233 Jy/beam ! Clean residual mean=-0.000019 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 1.16412 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 38 components and 1.16412 Jy ! Inverting map ! Added new window around map position (-1.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103226 Jy ! Component: 100 - total flux cleaned = 0.0165352 Jy ! Component: 150 - total flux cleaned = 0.0194475 Jy ! Component: 200 - total flux cleaned = 0.0206351 Jy ! Total flux subtracted in 200 components = 0.0206351 Jy ! Clean residual min=-0.005177 max=0.004072 Jy/beam ! Clean residual mean=-0.000006 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 1.18476 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 57 components and 1.18475 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=2.552 mas, bpa=11.82 degrees ! Estimated noise=0.581632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385469 Jy ! Component: 100 - total flux cleaned = 0.0047792 Jy ! Component: 150 - total flux cleaned = 0.00447356 Jy ! Component: 200 - total flux cleaned = 0.00429449 Jy ! Total flux subtracted in 200 components = 0.00429449 Jy ! Clean residual min=-0.003147 max=0.003076 Jy/beam ! Clean residual mean=-0.000008 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 1.18905 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015624 Jy ! Component: 100 - total flux cleaned = -0.000296087 Jy ! Component: 150 - total flux cleaned = -0.000359486 Jy ! Component: 200 - total flux cleaned = -0.000416656 Jy ! Total flux subtracted in 200 components = -0.000416656 Jy ! Clean residual min=-0.002974 max=0.002988 Jy/beam ! Clean residual mean=-0.000008 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 1.18863 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 110 components and 1.18863 Jy ! Inverting map ! Added new window around map position (-23.4, -32.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269637 Jy ! Component: 100 - total flux cleaned = 0.00344227 Jy ! Component: 150 - total flux cleaned = 0.00359234 Jy ! Component: 200 - total flux cleaned = 0.0037327 Jy ! Total flux subtracted in 200 components = 0.0037327 Jy ! Clean residual min=-0.002989 max=0.002197 Jy/beam ! Clean residual mean=-0.000004 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 1.19237 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 128 components and 1.19237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9983 mas, bmaj=1.476 mas, bpa=9.569 degrees ! Estimated noise=0.457443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384565 Jy ! Component: 100 - total flux cleaned = -0.000376018 Jy ! Component: 150 - total flux cleaned = -0.000530333 Jy ! Component: 200 - total flux cleaned = -0.000377644 Jy ! Total flux subtracted in 200 components = -0.000377644 Jy ! Clean residual min=-0.004560 max=0.003479 Jy/beam ! Clean residual mean=-0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 1.19199 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 144 components and 1.19199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070434Jy sigma=0.832580 ! Fit after self-cal, rms=0.070216Jy sigma=0.828570 wmodel J1130+3815_X_a_map.mod ! Writing 144 model components to file: J1130+3815_X_a_map.mod wobs J1130+3815_X_a_uvs.fits ! Writing UV FITS file: J1130+3815_X_a_uvs.fits wwins J1130+3815_X_a_map.win ! wwins: Wrote 8 windows to J1130+3815_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189935 Jy ! Component: 100 - total flux cleaned = -0.00210401 Jy ! Component: 150 - total flux cleaned = -0.00179702 Jy ! Component: 200 - total flux cleaned = -0.00150189 Jy ! Component: 250 - total flux cleaned = -0.0014441 Jy ! Component: 300 - total flux cleaned = -0.00127429 Jy ! Component: 350 - total flux cleaned = -0.00105226 Jy ! Component: 400 - total flux cleaned = -0.000942658 Jy ! Component: 450 - total flux cleaned = -0.0007269 Jy ! Component: 500 - total flux cleaned = -0.000620808 Jy ! Component: 550 - total flux cleaned = -0.000463267 Jy ! Component: 600 - total flux cleaned = -0.000256336 Jy ! Component: 650 - total flux cleaned = -0.000154068 Jy ! Component: 700 - total flux cleaned = -5.28895e-05 Jy ! Component: 750 - total flux cleaned = 4.74457e-05 Jy ! Component: 800 - total flux cleaned = 0.000146768 Jy ! Component: 850 - total flux cleaned = 0.000147522 Jy ! Component: 900 - total flux cleaned = 0.000390062 Jy ! Component: 950 - total flux cleaned = 0.000198291 Jy ! Component: 1000 - total flux cleaned = 0.000293406 Jy ! Component: 1050 - total flux cleaned = 0.000293118 Jy ! Component: 1100 - total flux cleaned = 0.000339911 Jy ! Component: 1150 - total flux cleaned = 0.000385462 Jy ! Component: 1200 - total flux cleaned = 0.000476309 Jy ! Component: 1250 - total flux cleaned = 0.000339827 Jy ! Component: 1300 - total flux cleaned = 0.000475313 Jy ! Component: 1350 - total flux cleaned = 0.000430954 Jy ! Component: 1400 - total flux cleaned = 0.000475262 Jy ! Component: 1450 - total flux cleaned = 0.000519465 Jy ! Component: 1500 - total flux cleaned = 0.000475519 Jy ! Component: 1550 - total flux cleaned = 0.000475989 Jy ! Component: 1600 - total flux cleaned = 0.000518919 Jy ! Component: 1650 - total flux cleaned = 0.000561618 Jy ! Component: 1700 - total flux cleaned = 0.000561594 Jy ! Component: 1750 - total flux cleaned = 0.00056151 Jy ! Component: 1800 - total flux cleaned = 0.000645171 Jy ! Component: 1850 - total flux cleaned = 0.00064484 Jy ! Component: 1900 - total flux cleaned = 0.000808935 Jy ! Component: 1950 - total flux cleaned = 0.000849593 Jy ! Component: 2000 - total flux cleaned = 0.000889866 Jy ! Component: 2050 - total flux cleaned = 0.000969988 Jy ! Component: 2100 - total flux cleaned = 0.000930081 Jy ! Component: 2150 - total flux cleaned = 0.00100959 Jy ! Component: 2200 - total flux cleaned = 0.00104934 Jy ! Component: 2250 - total flux cleaned = 0.00116693 Jy ! Component: 2300 - total flux cleaned = 0.00128365 Jy ! Component: 2350 - total flux cleaned = 0.00120606 Jy ! Component: 2400 - total flux cleaned = 0.00143687 Jy ! Component: 2450 - total flux cleaned = 0.001437 Jy ! Component: 2500 - total flux cleaned = 0.00155097 Jy ! Component: 2550 - total flux cleaned = 0.00158922 Jy ! Component: 2600 - total flux cleaned = 0.00173937 Jy ! Component: 2650 - total flux cleaned = 0.00166489 Jy ! Component: 2700 - total flux cleaned = 0.00170209 Jy ! Component: 2750 - total flux cleaned = 0.00203429 Jy ! Component: 2800 - total flux cleaned = 0.00181502 Jy ! Component: 2850 - total flux cleaned = 0.00203375 Jy ! Component: 2900 - total flux cleaned = 0.00217872 Jy ! Component: 2950 - total flux cleaned = 0.00207065 Jy ! Component: 3000 - total flux cleaned = 0.00214258 Jy ! Component: 3050 - total flux cleaned = 0.00224953 Jy ! Component: 3100 - total flux cleaned = 0.00235576 Jy ! Component: 3150 - total flux cleaned = 0.00235539 Jy ! Component: 3200 - total flux cleaned = 0.00249573 Jy ! Component: 3250 - total flux cleaned = 0.00260034 Jy ! Component: 3300 - total flux cleaned = 0.00263521 Jy ! Component: 3350 - total flux cleaned = 0.00273861 Jy ! Component: 3400 - total flux cleaned = 0.00294477 Jy ! Component: 3450 - total flux cleaned = 0.00301306 Jy ! Component: 3500 - total flux cleaned = 0.00314899 Jy ! Component: 3550 - total flux cleaned = 0.00321639 Jy ! Component: 3600 - total flux cleaned = 0.00338475 Jy ! Component: 3650 - total flux cleaned = 0.0033513 Jy ! Component: 3700 - total flux cleaned = 0.00338485 Jy ! Component: 3750 - total flux cleaned = 0.0035508 Jy ! Component: 3800 - total flux cleaned = 0.00361668 Jy ! Component: 3850 - total flux cleaned = 0.0037807 Jy ! Component: 3900 - total flux cleaned = 0.00371536 Jy ! Component: 3950 - total flux cleaned = 0.00384559 Jy ! Component: 4000 - total flux cleaned = 0.00397495 Jy ! Component: 4050 - total flux cleaned = 0.00410403 Jy ! Total flux subtracted in 4096 components = 0.00407191 Jy ! Clean residual min=-0.001603 max=0.001602 Jy/beam ! Clean residual mean=0.000000 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 1.19606 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 406 components and 1.19606 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1130+3815_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9983 x 1.476 at 9.569 degrees (North through East) ! Clean map min=-0.0039856 max=0.9818 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1130+3815_X_a_map.fits wmodel /vlbi/uf001/uvm//J1130+3815_X_a_map.mod ! Writing 406 model components to file: /vlbi/uf001/uvm//J1130+3815_X_a_map.mod wobs /vlbi/uf001/uvm//J1130+3815_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1130+3815_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1130+3815_X_a_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1130+3815_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.981796 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506654 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.154814 0.154814 0.309629 0.619257 1.23851 2.47703 4.95406 9.90812 19.8162 39.6325 79.265 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.981 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1937.8 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1130+3815_X_a_dfm.log closed on Sun Jan 13 21:28:53 2019