! Started logfile: /vlbi/uf001/uvm//J1129-0240_S_a_dfm.log on Sun Jan 13 21:28:14 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1129-0240_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1129-0240_S_a_uvm.fits
! AN table 1: 88 integrations on 36 of 36 possible baselines.
! AN table 2: 148 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.901532 visibilities/baseline/integration-bin.
! Found source: J1129-0240
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 19776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1129-0240_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 92 telescope corrections were flagged in sub-array 1.
!  A total of 37 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 92 telescope corrections were flagged in sub-array 1.
!  A total of 37 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 92 telescope corrections were flagged in sub-array 1.
!  A total of 37 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.012629Jy  sigma=19.933798
! Fit after  self-cal, rms=0.918612Jy  sigma=18.042764
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.728 mas, bmaj=13.99 mas, bpa=-18.95 degrees
! Estimated noise=0.438469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630223 Jy
! Component: 100  -  total flux cleaned = 0.0774523 Jy
! Total flux subtracted in 100 components = 0.0774523 Jy
! Clean residual min=-0.003681 max=0.005523 Jy/beam
! Clean residual mean=0.000007 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.0774523 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0774523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072583Jy  sigma=1.250036
! Fit after  self-cal, rms=0.071988Jy  sigma=1.238655
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.322 mas, bmaj=14.7 mas, bpa=-17.91 degrees
! Estimated noise=0.264897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00820711 Jy
! Component: 100  -  total flux cleaned = 0.0123499 Jy
! Component: 150  -  total flux cleaned = 0.0148243 Jy
! Component: 200  -  total flux cleaned = 0.0165053 Jy
! Total flux subtracted in 200 components = 0.0165053 Jy
! Clean residual min=-0.002707 max=0.003234 Jy/beam
! Clean residual mean=0.000004 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.0939576 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 54 components and 0.0939576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071122Jy  sigma=1.217374
! Fit after  self-cal, rms=0.071133Jy  sigma=1.217141
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.322 x 14.7 at -17.91 degrees (North through East)
! Clean map  min=-0.0025935  max=0.084596 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     FD        0.92     HN        1.04     KP        1.01     
!   LA        0.94     MK        1.19     NL        1.08     OV        0.99     
!   PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.19     FD        0.92     HN        1.02     KP        0.95     
!   LA        0.96     MK        1.02     NL        1.03     OV        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     FD        1.07     HN        1.02     KP        1.06     
!   LA        0.95     MK        1.03     NL        1.11     OV        0.87     
!   PT        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.40     FD        0.94     HN        0.97     KP        0.99     
!   LA        1.02     MK        1.01     NL        0.91     OV        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.94     MK        1.13     NL        1.06     OV        1.01     
!   PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.44     FD        0.96     HN        1.00     KP        0.97     
!   LA        0.94     MK        0.96     NL        0.99     OV        1.00     
! 
! 
! Fit before self-cal, rms=0.071133Jy  sigma=1.217141
! Fit after  self-cal, rms=0.076369Jy  sigma=1.203935
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.35 mas, bmaj=15.04 mas, bpa=-17.8 degrees
! Estimated noise=0.266128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000798959 Jy
! Component: 100  -  total flux cleaned = -0.00103366 Jy
! Component: 150  -  total flux cleaned = -0.00126545 Jy
! Component: 200  -  total flux cleaned = -0.00144957 Jy
! Total flux subtracted in 200 components = -0.00144957 Jy
! Clean residual min=-0.002202 max=0.002316 Jy/beam
! Clean residual mean=-0.000001 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.092508 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.092508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076323Jy  sigma=1.203679
! Fit after  self-cal, rms=0.076420Jy  sigma=1.203209
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076420Jy  sigma=1.203209
! Fit after  self-cal, rms=0.073195Jy  sigma=1.194930
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.357 mas, bmaj=15.09 mas, bpa=-17.88 degrees
! Estimated noise=0.265282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233277 Jy
! Component: 100  -  total flux cleaned = -0.000233082 Jy
! Component: 150  -  total flux cleaned = -0.00023268 Jy
! Component: 200  -  total flux cleaned = -0.000232351 Jy
! Total flux subtracted in 200 components = -0.000232351 Jy
! Clean residual min=-0.001211 max=0.001281 Jy/beam
! Clean residual mean=-0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0922757 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 82 components and 0.0922756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073189Jy  sigma=1.194766
! Fit after  self-cal, rms=0.073213Jy  sigma=1.194528
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-67.5, -116).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000906231 Jy
! Component: 100  -  total flux cleaned = 0.00105453 Jy
! Component: 150  -  total flux cleaned = 0.00100991 Jy
! Component: 200  -  total flux cleaned = 0.00101043 Jy
! Total flux subtracted in 200 components = 0.00101043 Jy
! Clean residual min=-0.001028 max=0.001089 Jy/beam
! Clean residual mean=-0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0932861 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 101 components and 0.0932861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073185Jy  sigma=1.194073
! Fit after  self-cal, rms=0.073181Jy  sigma=1.194032
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073181Jy  sigma=1.194032
! Fit after  self-cal, rms=0.073632Jy  sigma=1.193966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=15.12 mas, bpa=-17.86 degrees
! Estimated noise=0.265552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389466 Jy
! Component: 100  -  total flux cleaned = 0.000351227 Jy
! Component: 150  -  total flux cleaned = 0.000331862 Jy
! Component: 200  -  total flux cleaned = 0.00028125 Jy
! Total flux subtracted in 200 components = 0.00028125 Jy
! Clean residual min=-0.000967 max=0.001068 Jy/beam
! Clean residual mean=-0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0935673 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.0935673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073620Jy  sigma=1.193783
! Fit after  self-cal, rms=0.073623Jy  sigma=1.193770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112661 Jy
! Component: 100  -  total flux cleaned = 0.000112196 Jy
! Component: 150  -  total flux cleaned = 9.72034e-05 Jy
! Component: 200  -  total flux cleaned = 5.57595e-05 Jy
! Total flux subtracted in 200 components = 5.57595e-05 Jy
! Clean residual min=-0.000969 max=0.001057 Jy/beam
! Clean residual mean=-0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.0936231 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 121 components and 0.0936231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073616Jy  sigma=1.193666
! Fit after  self-cal, rms=0.073615Jy  sigma=1.193665
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073615Jy  sigma=1.193665
! Fit after  self-cal, rms=0.073646Jy  sigma=1.193619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.13 mas, bmaj=15.7 mas, bpa=-12.14 degrees
! Estimated noise=0.32344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118603 Jy
! Component: 100  -  total flux cleaned = -0.000153872 Jy
! Component: 150  -  total flux cleaned = -0.000154429 Jy
! Component: 200  -  total flux cleaned = -0.000154406 Jy
! Total flux subtracted in 200 components = -0.000154406 Jy
! Clean residual min=-0.001198 max=0.001131 Jy/beam
! Clean residual mean=-0.000003 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0934687 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 136 components and 0.0934687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073643Jy  sigma=1.193581
! Fit after  self-cal, rms=0.073644Jy  sigma=1.193573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.99475e-05 Jy
! Component: 100  -  total flux cleaned = 7.82839e-05 Jy
! Component: 150  -  total flux cleaned = 8.69567e-05 Jy
! Component: 200  -  total flux cleaned = 9.51428e-05 Jy
! Total flux subtracted in 200 components = 9.51428e-05 Jy
! Clean residual min=-0.001182 max=0.001104 Jy/beam
! Clean residual mean=-0.000003 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0935638 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 143 components and 0.0935638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073642Jy  sigma=1.193555
! Fit after  self-cal, rms=0.073642Jy  sigma=1.193554
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=15.13 mas, bpa=-17.86 degrees
! Estimated noise=0.265443 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 15.13 at -17.86 degrees (North through East)
! Clean map  min=-0.0011206  max=0.084748 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.767 mas, bmaj=14.19 mas, bpa=-18.81 degrees
! Estimated noise=0.449963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0648266 Jy
! Component: 100  -  total flux cleaned = 0.0790874 Jy
! Component: 150  -  total flux cleaned = 0.0842106 Jy
! Component: 200  -  total flux cleaned = 0.0873883 Jy
! Total flux subtracted in 200 components = 0.0873883 Jy
! Clean residual min=-0.002388 max=0.002063 Jy/beam
! Clean residual mean=0.000002 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.0873883 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0873883 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=15.13 mas, bpa=-17.86 degrees
! Estimated noise=0.265443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249423 Jy
! Component: 100  -  total flux cleaned = 0.00404323 Jy
! Component: 150  -  total flux cleaned = 0.00480296 Jy
! Component: 200  -  total flux cleaned = 0.00523741 Jy
! Total flux subtracted in 200 components = 0.00523741 Jy
! Clean residual min=-0.001062 max=0.001069 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.0926257 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 70 components and 0.0926257 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.13 mas, bmaj=15.7 mas, bpa=-12.14 degrees
! Estimated noise=0.32344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713663 Jy
! Component: 100  -  total flux cleaned = 0.000934777 Jy
! Component: 150  -  total flux cleaned = 0.00100536 Jy
! Component: 200  -  total flux cleaned = 0.00106824 Jy
! Total flux subtracted in 200 components = 0.00106824 Jy
! Clean residual min=-0.001235 max=0.001172 Jy/beam
! Clean residual mean=-0.000002 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0936939 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.44583e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125152 Jy
! Component: 150  -  total flux cleaned = 0.000141082 Jy
! Component: 200  -  total flux cleaned = 0.000186846 Jy
! Total flux subtracted in 200 components = 0.000186846 Jy
! Clean residual min=-0.001190 max=0.001141 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0938808 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 115 components and 0.0938808 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=15.13 mas, bpa=-17.86 degrees
! Estimated noise=0.265443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102757 Jy
! Component: 100  -  total flux cleaned = 0.000197789 Jy
! Component: 150  -  total flux cleaned = 0.00017835 Jy
! Component: 200  -  total flux cleaned = 0.000196558 Jy
! Total flux subtracted in 200 components = 0.000196558 Jy
! Clean residual min=-0.001015 max=0.001049 Jy/beam
! Clean residual mean=-0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0940773 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 134 components and 0.0940773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073654Jy  sigma=1.193700
! Fit after  self-cal, rms=0.073643Jy  sigma=1.193671
wmodel J1129-0240_S_a_map.mod
! Writing 134 model components to file: J1129-0240_S_a_map.mod
wobs   J1129-0240_S_a_uvs.fits
! Writing UV FITS file: J1129-0240_S_a_uvs.fits
wwins  J1129-0240_S_a_map.win
! wwins: Wrote 2 windows to J1129-0240_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255007 Jy
! Component: 100  -  total flux cleaned = 0.000397313 Jy
! Component: 150  -  total flux cleaned = 0.000380959 Jy
! Component: 200  -  total flux cleaned = 0.000445508 Jy
! Component: 250  -  total flux cleaned = 0.000461216 Jy
! Component: 300  -  total flux cleaned = 0.000416139 Jy
! Component: 350  -  total flux cleaned = 0.000402034 Jy
! Component: 400  -  total flux cleaned = 0.000402374 Jy
! Component: 450  -  total flux cleaned = 0.000416491 Jy
! Component: 500  -  total flux cleaned = 0.000470556 Jy
! Component: 550  -  total flux cleaned = 0.000457319 Jy
! Component: 600  -  total flux cleaned = 0.000470359 Jy
! Component: 650  -  total flux cleaned = 0.00047031 Jy
! Component: 700  -  total flux cleaned = 0.000445409 Jy
! Component: 750  -  total flux cleaned = 0.000482185 Jy
! Component: 800  -  total flux cleaned = 0.000482154 Jy
! Component: 850  -  total flux cleaned = 0.000482245 Jy
! Component: 900  -  total flux cleaned = 0.00048226 Jy
! Component: 950  -  total flux cleaned = 0.000482272 Jy
! Component: 1000  -  total flux cleaned = 0.000504992 Jy
! Component: 1050  -  total flux cleaned = 0.000549701 Jy
! Component: 1100  -  total flux cleaned = 0.000516363 Jy
! Component: 1150  -  total flux cleaned = 0.000538632 Jy
! Component: 1200  -  total flux cleaned = 0.000549627 Jy
! Component: 1250  -  total flux cleaned = 0.000538806 Jy
! Component: 1300  -  total flux cleaned = 0.000539117 Jy
! Component: 1350  -  total flux cleaned = 0.000549732 Jy
! Component: 1400  -  total flux cleaned = 0.000590902 Jy
! Component: 1450  -  total flux cleaned = 0.000539889 Jy
! Component: 1500  -  total flux cleaned = 0.000539988 Jy
! Component: 1550  -  total flux cleaned = 0.000540021 Jy
! Component: 1600  -  total flux cleaned = 0.00053014 Jy
! Component: 1650  -  total flux cleaned = 0.000540243 Jy
! Component: 1700  -  total flux cleaned = 0.000569294 Jy
! Component: 1750  -  total flux cleaned = 0.000569416 Jy
! Component: 1800  -  total flux cleaned = 0.000588498 Jy
! Component: 1850  -  total flux cleaned = 0.00057904 Jy
! Component: 1900  -  total flux cleaned = 0.000607026 Jy
! Component: 1950  -  total flux cleaned = 0.000616341 Jy
! Component: 2000  -  total flux cleaned = 0.000643815 Jy
! Component: 2050  -  total flux cleaned = 0.000607335 Jy
! Component: 2100  -  total flux cleaned = 0.00058932 Jy
! Component: 2150  -  total flux cleaned = 0.000589303 Jy
! Component: 2200  -  total flux cleaned = 0.000615836 Jy
! Component: 2250  -  total flux cleaned = 0.000589374 Jy
! Component: 2300  -  total flux cleaned = 0.000589427 Jy
! Component: 2350  -  total flux cleaned = 0.000537523 Jy
! Component: 2400  -  total flux cleaned = 0.000554834 Jy
! Component: 2450  -  total flux cleaned = 0.000546284 Jy
! Component: 2500  -  total flux cleaned = 0.000521016 Jy
! Component: 2550  -  total flux cleaned = 0.000512672 Jy
! Component: 2600  -  total flux cleaned = 0.000462696 Jy
! Component: 2650  -  total flux cleaned = 0.000504125 Jy
! Component: 2700  -  total flux cleaned = 0.00047123 Jy
! Component: 2750  -  total flux cleaned = 0.000463151 Jy
! Component: 2800  -  total flux cleaned = 0.000463171 Jy
! Component: 2850  -  total flux cleaned = 0.000431121 Jy
! Component: 2900  -  total flux cleaned = 0.000431 Jy
! Component: 2950  -  total flux cleaned = 0.000399245 Jy
! Component: 3000  -  total flux cleaned = 0.000407086 Jy
! Component: 3050  -  total flux cleaned = 0.000399193 Jy
! Component: 3100  -  total flux cleaned = 0.000399151 Jy
! Component: 3150  -  total flux cleaned = 0.000375909 Jy
! Component: 3200  -  total flux cleaned = 0.000383543 Jy
! Component: 3250  -  total flux cleaned = 0.000375871 Jy
! Component: 3300  -  total flux cleaned = 0.000368309 Jy
! Component: 3350  -  total flux cleaned = 0.000330587 Jy
! Component: 3400  -  total flux cleaned = 0.000338104 Jy
! Component: 3450  -  total flux cleaned = 0.000330689 Jy
! Component: 3500  -  total flux cleaned = 0.00034549 Jy
! Component: 3550  -  total flux cleaned = 0.000338078 Jy
! Component: 3600  -  total flux cleaned = 0.000272154 Jy
! Component: 3650  -  total flux cleaned = 0.000286808 Jy
! Component: 3700  -  total flux cleaned = 0.000286797 Jy
! Component: 3750  -  total flux cleaned = 0.000265143 Jy
! Component: 3800  -  total flux cleaned = 0.00023656 Jy
! Component: 3850  -  total flux cleaned = 0.000193824 Jy
! Component: 3900  -  total flux cleaned = 0.000193853 Jy
! Component: 3950  -  total flux cleaned = 0.000165625 Jy
! Component: 4000  -  total flux cleaned = 0.000116581 Jy
! Component: 4050  -  total flux cleaned = 0.00013746 Jy
! Total flux subtracted in 4096 components = 0.000109667 Jy
! Clean residual min=-0.000445 max=0.000454 Jy/beam
! Clean residual mean=-0.000000 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.094187 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 419 components and 0.0941869 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1129-0240_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 15.13 at -17.86 degrees (North through East)
! Clean map  min=-0.00097675  max=0.084643 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1129-0240_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1129-0240_S_a_map.mod
! Writing 419 model components to file: /vlbi/uf001/uvm//J1129-0240_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1129-0240_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1129-0240_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1129-0240_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J1129-0240_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0846433 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000133391 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.472777 0.472777 0.945554 1.89111 3.78221 7.56443 15.1289 30.2577 60.5154
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.084 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  634.548 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1129-0240_S_a_dfm.log closed on Sun Jan 13 21:28:19 2019