! Started logfile: /vlbi/uf001/uva//J1127-1857_S_b_dfm.log on Mon Jan 14 01:19:16 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1127-1857_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1127-1857_S_b_uva.fits
! AN table 1: 14 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.755102 visibilities/baseline/integration-bin.
! Found source: J1127-1857
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 888 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1127-1857_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.322033Jy  sigma=16.950361
! Fit after  self-cal, rms=0.273836Jy  sigma=3.084241
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.788 mas, bmaj=11.42 mas, bpa=-18.56 degrees
! Estimated noise=2.96272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.678396 Jy
! Component: 100  -  total flux cleaned = 0.852746 Jy
! Total flux subtracted in 100 components = 0.852746 Jy
! Clean residual min=-0.040772 max=0.076202 Jy/beam
! Clean residual mean=-0.000164 rms=0.015297 Jy/beam
! Combined flux in latest and established models = 0.852746 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.852746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.216332Jy  sigma=2.660793
! Fit after  self-cal, rms=0.216316Jy  sigma=2.660283
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.218 mas, bmaj=12.07 mas, bpa=-18.93 degrees
! Estimated noise=2.64945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851897 Jy
! Component: 100  -  total flux cleaned = 0.131765 Jy
! Component: 150  -  total flux cleaned = 0.154929 Jy
! Component: 200  -  total flux cleaned = 0.162799 Jy
! Total flux subtracted in 200 components = 0.162799 Jy
! Clean residual min=-0.036436 max=0.058552 Jy/beam
! Clean residual mean=-0.000068 rms=0.012336 Jy/beam
! Combined flux in latest and established models = 1.01554 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 1.01554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.181417Jy  sigma=2.139366
! Fit after  self-cal, rms=0.181398Jy  sigma=2.138593
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.218 x 12.07 at -18.93 degrees (North through East)
! Clean map  min=-0.035454  max=0.85705 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.94     HN        1.04     KP        0.95     
!   LA        0.94     MK        0.97     NL        1.00     OV        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.18     FD        0.98     HN        1.05     KP        0.96     
!   LA        0.97     MK        0.96     NL        0.94     OV        0.92     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.49     FD        0.98     HN        1.04     KP        0.96     
!   LA        0.95     MK        0.96     NL        1.01     OV        0.92     
! 
! 
! Fit before self-cal, rms=0.181398Jy  sigma=2.138593
! Fit after  self-cal, rms=0.140079Jy  sigma=1.260071
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=12.52 mas, bpa=-19.22 degrees
! Estimated noise=2.72058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0225583 Jy
! Component: 100  -  total flux cleaned = -0.0257558 Jy
! Component: 150  -  total flux cleaned = -0.0276213 Jy
! Component: 200  -  total flux cleaned = -0.028707 Jy
! Total flux subtracted in 200 components = -0.028707 Jy
! Clean residual min=-0.019452 max=0.017120 Jy/beam
! Clean residual mean=-0.000033 rms=0.004713 Jy/beam
! Combined flux in latest and established models = 0.986837 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 56 components and 0.986837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133709Jy  sigma=1.162452
! Fit after  self-cal, rms=0.133994Jy  sigma=1.160863
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133994Jy  sigma=1.160863
! Fit after  self-cal, rms=0.121381Jy  sigma=1.020253
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.159 mas, bmaj=12.57 mas, bpa=-19.47 degrees
! Estimated noise=2.71544 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0144387 Jy
! Component: 100  -  total flux cleaned = -0.0162707 Jy
! Component: 150  -  total flux cleaned = -0.0170831 Jy
! Component: 200  -  total flux cleaned = -0.0177655 Jy
! Total flux subtracted in 200 components = -0.0177655 Jy
! Clean residual min=-0.012723 max=0.011512 Jy/beam
! Clean residual mean=-0.000005 rms=0.003274 Jy/beam
! Combined flux in latest and established models = 0.969072 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.969072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118858Jy  sigma=0.986447
! Fit after  self-cal, rms=0.118863Jy  sigma=0.986000
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000688862 Jy
! Component: 100  -  total flux cleaned = -0.00122377 Jy
! Component: 150  -  total flux cleaned = -0.00188439 Jy
! Component: 200  -  total flux cleaned = -0.00248527 Jy
! Total flux subtracted in 200 components = -0.00248527 Jy
! Clean residual min=-0.012459 max=0.011871 Jy/beam
! Clean residual mean=-0.000005 rms=0.003199 Jy/beam
! Combined flux in latest and established models = 0.966587 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.966587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118229Jy  sigma=0.979301
! Fit after  self-cal, rms=0.118248Jy  sigma=0.978967
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118248Jy  sigma=0.978967
! Fit after  self-cal, rms=0.120040Jy  sigma=0.969215
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=12.62 mas, bpa=-19.53 degrees
! Estimated noise=2.71588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00620942 Jy
! Component: 100  -  total flux cleaned = -0.0072472 Jy
! Component: 150  -  total flux cleaned = -0.00796453 Jy
! Component: 200  -  total flux cleaned = -0.00894427 Jy
! Total flux subtracted in 200 components = -0.00894427 Jy
! Clean residual min=-0.010730 max=0.010108 Jy/beam
! Clean residual mean=0.000001 rms=0.002856 Jy/beam
! Combined flux in latest and established models = 0.957642 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.957642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119151Jy  sigma=0.959237
! Fit after  self-cal, rms=0.119170Jy  sigma=0.959039
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000508293 Jy
! Component: 100  -  total flux cleaned = -0.00104657 Jy
! Component: 150  -  total flux cleaned = -0.00142629 Jy
! Component: 200  -  total flux cleaned = -0.00189503 Jy
! Total flux subtracted in 200 components = -0.00189503 Jy
! Clean residual min=-0.010596 max=0.010240 Jy/beam
! Clean residual mean=0.000001 rms=0.002814 Jy/beam
! Combined flux in latest and established models = 0.955747 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.955747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118795Jy  sigma=0.955517
! Fit after  self-cal, rms=0.118817Jy  sigma=0.955330
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118817Jy  sigma=0.955330
! Fit after  self-cal, rms=0.120114Jy  sigma=0.952142
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.956 mas, bmaj=17.78 mas, bpa=-8.279 degrees
! Estimated noise=3.46068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0047091 Jy
! Component: 100  -  total flux cleaned = -0.00542043 Jy
! Component: 150  -  total flux cleaned = -0.00604851 Jy
! Component: 200  -  total flux cleaned = -0.00642553 Jy
! Total flux subtracted in 200 components = -0.00642553 Jy
! Clean residual min=-0.014034 max=0.013401 Jy/beam
! Clean residual mean=-0.000003 rms=0.003663 Jy/beam
! Combined flux in latest and established models = 0.949322 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 99 components and 0.949322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119800Jy  sigma=0.949903
! Fit after  self-cal, rms=0.119762Jy  sigma=0.949670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029531 Jy
! Component: 100  -  total flux cleaned = -0.000548719 Jy
! Component: 150  -  total flux cleaned = -0.000858322 Jy
! Component: 200  -  total flux cleaned = -0.00107568 Jy
! Total flux subtracted in 200 components = -0.00107568 Jy
! Clean residual min=-0.013734 max=0.013386 Jy/beam
! Clean residual mean=-0.000003 rms=0.003648 Jy/beam
! Combined flux in latest and established models = 0.948246 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 106 components and 0.948246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119639Jy  sigma=0.948902
! Fit after  self-cal, rms=0.119596Jy  sigma=0.948682
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.163 mas, bmaj=12.66 mas, bpa=-19.54 degrees
! Estimated noise=2.71499 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.163 x 12.66 at -19.54 degrees (North through East)
! Clean map  min=-0.0098562  max=0.86482 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119596Jy  sigma=0.948682
! Fit after  self-cal, rms=0.117130Jy  sigma=0.889641
! Inverting map and beam 
! Estimated beam: bmin=3.164 mas, bmaj=12.7 mas, bpa=-19.49 degrees
! Estimated noise=2.71481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00307552 Jy
! Component: 100  -  total flux cleaned = -0.00349985 Jy
! Component: 150  -  total flux cleaned = -0.00373025 Jy
! Component: 200  -  total flux cleaned = -0.00383025 Jy
! Total flux subtracted in 200 components = -0.00383025 Jy
! Clean residual min=-0.009669 max=0.009504 Jy/beam
! Clean residual mean=0.000004 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 0.944416 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 115 components and 0.944416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116716Jy  sigma=0.885081
! Fit after  self-cal, rms=0.116727Jy  sigma=0.884907
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353063 Jy
! Component: 100  -  total flux cleaned = -0.000542603 Jy
! Component: 150  -  total flux cleaned = -0.00063332 Jy
! Component: 200  -  total flux cleaned = -0.00080978 Jy
! Total flux subtracted in 200 components = -0.00080978 Jy
! Clean residual min=-0.009701 max=0.009545 Jy/beam
! Clean residual mean=0.000004 rms=0.002537 Jy/beam
! Combined flux in latest and established models = 0.943606 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.943606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116518Jy  sigma=0.883082
! Fit after  self-cal, rms=0.116542Jy  sigma=0.882976
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116542Jy  sigma=0.882976
! Fit after  self-cal, rms=0.117326Jy  sigma=0.881520
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.761 mas, bmaj=12.12 mas, bpa=-19.12 degrees
! Estimated noise=3.01426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.687153 Jy
! Component: 100  -  total flux cleaned = 0.84196 Jy
! Component: 150  -  total flux cleaned = 0.892482 Jy
! Component: 200  -  total flux cleaned = 0.912922 Jy
! Total flux subtracted in 200 components = 0.912922 Jy
! Clean residual min=-0.013607 max=0.014426 Jy/beam
! Clean residual mean=-0.000016 rms=0.003364 Jy/beam
! Combined flux in latest and established models = 0.912922 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.912922 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.166 mas, bmaj=12.73 mas, bpa=-19.48 degrees
! Estimated noise=2.71335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139835 Jy
! Component: 100  -  total flux cleaned = 0.0206445 Jy
! Component: 150  -  total flux cleaned = 0.0223446 Jy
! Component: 200  -  total flux cleaned = 0.0240182 Jy
! Total flux subtracted in 200 components = 0.0240182 Jy
! Clean residual min=-0.010682 max=0.009660 Jy/beam
! Clean residual mean=-0.000001 rms=0.002524 Jy/beam
! Combined flux in latest and established models = 0.93694 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.93694 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.96 mas, bmaj=17.88 mas, bpa=-8.326 degrees
! Estimated noise=3.45113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406342 Jy
! Component: 100  -  total flux cleaned = 0.00471476 Jy
! Component: 150  -  total flux cleaned = 0.00527901 Jy
! Component: 200  -  total flux cleaned = 0.00586489 Jy
! Total flux subtracted in 200 components = 0.00586489 Jy
! Clean residual min=-0.011902 max=0.013433 Jy/beam
! Clean residual mean=0.000001 rms=0.003320 Jy/beam
! Combined flux in latest and established models = 0.942805 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430106 Jy
! Component: 100  -  total flux cleaned = 0.000889961 Jy
! Component: 150  -  total flux cleaned = 0.00122679 Jy
! Component: 200  -  total flux cleaned = 0.00140952 Jy
! Total flux subtracted in 200 components = 0.00140952 Jy
! Clean residual min=-0.011623 max=0.013351 Jy/beam
! Clean residual mean=0.000002 rms=0.003288 Jy/beam
! Combined flux in latest and established models = 0.944214 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.944214 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.166 mas, bmaj=12.73 mas, bpa=-19.48 degrees
! Estimated noise=2.71335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000597336 Jy
! Component: 100  -  total flux cleaned = 2.77557e-05 Jy
! Component: 150  -  total flux cleaned = 0.000687498 Jy
! Component: 200  -  total flux cleaned = 0.000978977 Jy
! Total flux subtracted in 200 components = 0.000978977 Jy
! Clean residual min=-0.009319 max=0.009985 Jy/beam
! Clean residual mean=0.000004 rms=0.002408 Jy/beam
! Combined flux in latest and established models = 0.945193 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 0.945193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117436Jy  sigma=0.874627
! Fit after  self-cal, rms=0.117331Jy  sigma=0.873944
wmodel J1127-1857_S_b_map.mod
! Writing 63 model components to file: J1127-1857_S_b_map.mod
wobs   J1127-1857_S_b_uvs.fits
! Writing UV FITS file: J1127-1857_S_b_uvs.fits
wwins  J1127-1857_S_b_map.win
! wwins: Wrote 1 windows to J1127-1857_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128889 Jy
! Component: 100  -  total flux cleaned = 0.00270732 Jy
! Component: 150  -  total flux cleaned = 0.00419567 Jy
! Component: 200  -  total flux cleaned = 0.00546801 Jy
! Component: 250  -  total flux cleaned = 0.00600443 Jy
! Component: 300  -  total flux cleaned = 0.00652012 Jy
! Component: 350  -  total flux cleaned = 0.00701674 Jy
! Component: 400  -  total flux cleaned = 0.00749588 Jy
! Component: 450  -  total flux cleaned = 0.00795498 Jy
! Component: 500  -  total flux cleaned = 0.00839586 Jy
! Component: 550  -  total flux cleaned = 0.00903323 Jy
! Component: 600  -  total flux cleaned = 0.00923669 Jy
! Component: 650  -  total flux cleaned = 0.00963436 Jy
! Component: 700  -  total flux cleaned = 0.00953793 Jy
! Component: 750  -  total flux cleaned = 0.00972961 Jy
! Component: 800  -  total flux cleaned = 0.0100966 Jy
! Component: 850  -  total flux cleaned = 0.0101835 Jy
! Component: 900  -  total flux cleaned = 0.0105324 Jy
! Component: 950  -  total flux cleaned = 0.0110452 Jy
! Component: 1000  -  total flux cleaned = 0.0114623 Jy
! Component: 1050  -  total flux cleaned = 0.0117881 Jy
! Component: 1100  -  total flux cleaned = 0.012346 Jy
! Component: 1150  -  total flux cleaned = 0.0127363 Jy
! Component: 1200  -  total flux cleaned = 0.012966 Jy
! Component: 1250  -  total flux cleaned = 0.013417 Jy
! Component: 1300  -  total flux cleaned = 0.0137104 Jy
! Component: 1350  -  total flux cleaned = 0.0139996 Jy
! Component: 1400  -  total flux cleaned = 0.0144268 Jy
! Component: 1450  -  total flux cleaned = 0.0147068 Jy
! Component: 1500  -  total flux cleaned = 0.0149831 Jy
! Component: 1550  -  total flux cleaned = 0.0153204 Jy
! Component: 1600  -  total flux cleaned = 0.0153211 Jy
! Component: 1650  -  total flux cleaned = 0.0154513 Jy
! Component: 1700  -  total flux cleaned = 0.0156443 Jy
! Component: 1750  -  total flux cleaned = 0.0157714 Jy
! Component: 1800  -  total flux cleaned = 0.0161459 Jy
! Component: 1850  -  total flux cleaned = 0.0161449 Jy
! Component: 1900  -  total flux cleaned = 0.0162057 Jy
! Component: 1950  -  total flux cleaned = 0.0164446 Jy
! Component: 2000  -  total flux cleaned = 0.0166786 Jy
! Component: 2050  -  total flux cleaned = 0.0169095 Jy
! Component: 2100  -  total flux cleaned = 0.0171941 Jy
! Component: 2150  -  total flux cleaned = 0.0175874 Jy
! Component: 2200  -  total flux cleaned = 0.0177533 Jy
! Component: 2250  -  total flux cleaned = 0.0179184 Jy
! Component: 2300  -  total flux cleaned = 0.0180814 Jy
! Component: 2350  -  total flux cleaned = 0.0182948 Jy
! Component: 2400  -  total flux cleaned = 0.0182946 Jy
! Component: 2450  -  total flux cleaned = 0.018451 Jy
! Component: 2500  -  total flux cleaned = 0.0185017 Jy
! Component: 2550  -  total flux cleaned = 0.0185523 Jy
! Component: 2600  -  total flux cleaned = 0.0185528 Jy
! Component: 2650  -  total flux cleaned = 0.0185528 Jy
! Component: 2700  -  total flux cleaned = 0.0185037 Jy
! Component: 2750  -  total flux cleaned = 0.0185039 Jy
! Component: 2800  -  total flux cleaned = 0.0185036 Jy
! Component: 2850  -  total flux cleaned = 0.0184565 Jy
! Component: 2900  -  total flux cleaned = 0.0185041 Jy
! Component: 2950  -  total flux cleaned = 0.0185512 Jy
! Component: 3000  -  total flux cleaned = 0.0185512 Jy
! Component: 3050  -  total flux cleaned = 0.0186434 Jy
! Component: 3100  -  total flux cleaned = 0.0186891 Jy
! Component: 3150  -  total flux cleaned = 0.0186891 Jy
! Component: 3200  -  total flux cleaned = 0.0187335 Jy
! Component: 3250  -  total flux cleaned = 0.0187779 Jy
! Component: 3300  -  total flux cleaned = 0.0187777 Jy
! Component: 3350  -  total flux cleaned = 0.0187348 Jy
! Component: 3400  -  total flux cleaned = 0.018735 Jy
! Component: 3450  -  total flux cleaned = 0.0187776 Jy
! Component: 3500  -  total flux cleaned = 0.0186928 Jy
! Component: 3550  -  total flux cleaned = 0.0186927 Jy
! Component: 3600  -  total flux cleaned = 0.0188183 Jy
! Component: 3650  -  total flux cleaned = 0.0187766 Jy
! Component: 3700  -  total flux cleaned = 0.0186942 Jy
! Component: 3750  -  total flux cleaned = 0.0188177 Jy
! Component: 3800  -  total flux cleaned = 0.0189808 Jy
! Component: 3850  -  total flux cleaned = 0.0191425 Jy
! Component: 3900  -  total flux cleaned = 0.0191827 Jy
! Component: 3950  -  total flux cleaned = 0.0192629 Jy
! Component: 4000  -  total flux cleaned = 0.0193026 Jy
! Component: 4050  -  total flux cleaned = 0.0195791 Jy
! Total flux subtracted in 4096 components = 0.0198149 Jy
! Clean residual min=-0.002438 max=0.002003 Jy/beam
! Clean residual mean=0.000007 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.965008 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 322 components and 0.965008 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1127-1857_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.166 x 12.73 at -19.48 degrees (North through East)
! Clean map  min=-0.0063987  max=0.87456 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1127-1857_S_b_map.fits
wmodel /vlbi/uf001/uva//J1127-1857_S_b_map.mod
! Writing 322 model components to file: /vlbi/uf001/uva//J1127-1857_S_b_map.mod
wobs   /vlbi/uf001/uva//J1127-1857_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1127-1857_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J1127-1857_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1127-1857_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.874564 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000676283 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.231984 0.231984 0.463968 0.927937 1.85587 3.71175 7.42349 14.847 29.694 59.388
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.874 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1293.19 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1127-1857_S_b_dfm.log closed on Mon Jan 14 01:19:20 2019