! Started logfile: /vlbi/uf001/uva//J1127+5650_X_dfm.log on Mon Jan 14 01:18:57 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1127+5650_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1127+5650_X_uva.fits
! AN table 1: 72 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.984954 visibilities/baseline/integration-bin.
! Found source: J1127+5650
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30636 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1127+5650_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014167Jy  sigma=22.742888
! Fit after  self-cal, rms=0.855398Jy  sigma=19.187332
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7587 mas, bmaj=0.9166 mas, bpa=38.42 degrees
! Estimated noise=0.417619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.099118 Jy
! Component: 100  -  total flux cleaned = 0.14921 Jy
! Total flux subtracted in 100 components = 0.14921 Jy
! Clean residual min=-0.012473 max=0.030617 Jy/beam
! Clean residual mean=0.000029 rms=0.002698 Jy/beam
! Combined flux in latest and established models = 0.14921 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.14921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097325Jy  sigma=2.128265
! Fit after  self-cal, rms=0.093984Jy  sigma=2.049364
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0414607 Jy
! Component: 100  -  total flux cleaned = 0.063785 Jy
! Total flux subtracted in 100 components = 0.063785 Jy
! Clean residual min=-0.006338 max=0.013775 Jy/beam
! Clean residual mean=0.000016 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.212995 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 11 components and 0.212995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067860Jy  sigma=1.462043
! Fit after  self-cal, rms=0.067117Jy  sigma=1.446973
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158213 Jy
! Component: 100  -  total flux cleaned = 0.0243374 Jy
! Total flux subtracted in 100 components = 0.0243374 Jy
! Clean residual min=-0.005251 max=0.009340 Jy/beam
! Clean residual mean=0.000012 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.237333 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 16 components and 0.237333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062651Jy  sigma=1.353809
! Fit after  self-cal, rms=0.062520Jy  sigma=1.350306
! Inverting map 
! Added new window around map position (1.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00809222 Jy
! Component: 100  -  total flux cleaned = 0.0113961 Jy
! Total flux subtracted in 100 components = 0.0113961 Jy
! Clean residual min=-0.005206 max=0.007693 Jy/beam
! Clean residual mean=0.000010 rms=0.001089 Jy/beam
! Combined flux in latest and established models = 0.248729 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.248729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061375Jy  sigma=1.326890
! Fit after  self-cal, rms=0.061355Jy  sigma=1.326452
! Inverting map 
! Added new window around map position (2.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00757162 Jy
! Component: 100  -  total flux cleaned = 0.0117377 Jy
! Total flux subtracted in 100 components = 0.0117377 Jy
! Clean residual min=-0.004666 max=0.005176 Jy/beam
! Clean residual mean=0.000008 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.260466 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.260466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060112Jy  sigma=1.297368
! Fit after  self-cal, rms=0.060028Jy  sigma=1.295530
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9908 mas, bmaj=1.202 mas, bpa=37.06 degrees
! Estimated noise=0.182164 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568763 Jy
! Component: 100  -  total flux cleaned = 0.00915302 Jy
! Component: 150  -  total flux cleaned = 0.0110222 Jy
! Component: 200  -  total flux cleaned = 0.0119261 Jy
! Total flux subtracted in 200 components = 0.0119261 Jy
! Clean residual min=-0.005318 max=0.006628 Jy/beam
! Clean residual mean=0.000023 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.272392 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.272393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059436Jy  sigma=1.281148
! Fit after  self-cal, rms=0.059384Jy  sigma=1.280106
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9908 x 1.202 at 37.06 degrees (North through East)
! Clean map  min=-0.005205  max=0.13739 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.94     KP        0.96     LA        0.98     
!   MK        1.02     NL        1.09     OV        0.90     PT        0.98     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        0.94     KP        0.97     LA        0.99     
!   MK        1.02     NL        1.11     OV        0.91     PT        0.99     
!   SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.94     KP        0.97     LA        1.00     
!   MK        1.00     NL        1.10     OV        0.90     PT        1.01     
!   SC        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        0.94     KP        0.96     LA        0.99     
!   MK        1.03     NL        1.11     OV        0.90     PT        1.01     
!   SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        0.94     KP        0.98     LA        1.00     
!   MK        1.01     NL        1.13     OV        0.90     PT        1.01     
!   SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        0.96     KP        0.97     LA        0.99     
!   MK        1.03     NL        1.12     OV        0.90     PT        1.02     
!   SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     HN        0.94     KP        0.98     LA        1.01     
!   MK        1.02     NL        1.12     OV        0.93     PT        1.00     
!   SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.96     KP        0.99     LA        0.99     
!   MK        1.03     NL        1.12     OV        0.91     PT        1.01     
!   SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        0.95     KP        0.98     LA        1.00     
!   MK        1.04     NL        1.13     OV        0.92     PT        1.02     
!   SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.99     KP        0.99     LA        0.99     
!   MK        1.05     NL        1.12     OV        0.92     PT        1.03     
!   SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.94     KP        0.98     LA        1.00     
!   MK        1.05     NL        1.11     OV        0.94     PT        1.01     
!   SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.96     KP        0.99     LA        1.01     
!   MK        1.00     NL        1.12     OV        0.92     PT        1.01     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.059384Jy  sigma=1.280106
! Fit after  self-cal, rms=0.056726Jy  sigma=1.232273
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9781 mas, bmaj=1.201 mas, bpa=37.29 degrees
! Estimated noise=0.181462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000384876 Jy
! Component: 100  -  total flux cleaned = -0.000642959 Jy
! Component: 150  -  total flux cleaned = -0.000909584 Jy
! Component: 200  -  total flux cleaned = -0.00100007 Jy
! Total flux subtracted in 200 components = -0.00100007 Jy
! Clean residual min=-0.003346 max=0.004176 Jy/beam
! Clean residual mean=0.000021 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.271392 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.271393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056601Jy  sigma=1.229430
! Fit after  self-cal, rms=0.056601Jy  sigma=1.229001
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056601Jy  sigma=1.229001
! Fit after  self-cal, rms=0.054800Jy  sigma=1.170681
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9811 mas, bmaj=1.196 mas, bpa=37.02 degrees
! Estimated noise=0.181991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947044 Jy
! Component: 100  -  total flux cleaned = 0.00115846 Jy
! Component: 150  -  total flux cleaned = 0.00118947 Jy
! Component: 200  -  total flux cleaned = 0.00121598 Jy
! Total flux subtracted in 200 components = 0.00121598 Jy
! Clean residual min=-0.001205 max=0.001930 Jy/beam
! Clean residual mean=0.000011 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.272608 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.272609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054760Jy  sigma=1.169690
! Fit after  self-cal, rms=0.054785Jy  sigma=1.169421
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182906 Jy
! Component: 100  -  total flux cleaned = 0.00253383 Jy
! Component: 150  -  total flux cleaned = 0.0026262 Jy
! Component: 200  -  total flux cleaned = 0.00270308 Jy
! Total flux subtracted in 200 components = 0.00270308 Jy
! Clean residual min=-0.001233 max=0.001306 Jy/beam
! Clean residual mean=0.000009 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.275312 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.275312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054719Jy  sigma=1.167869
! Fit after  self-cal, rms=0.054715Jy  sigma=1.167764
! Inverting map 
! Added new window around map position (-12.8, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119866 Jy
! Component: 100  -  total flux cleaned = 0.00174801 Jy
! Component: 150  -  total flux cleaned = 0.00191386 Jy
! Component: 200  -  total flux cleaned = 0.00204266 Jy
! Total flux subtracted in 200 components = 0.00204266 Jy
! Clean residual min=-0.001115 max=0.001060 Jy/beam
! Clean residual mean=0.000010 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.277354 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.277354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054681Jy  sigma=1.167019
! Fit after  self-cal, rms=0.054679Jy  sigma=1.166960
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054679Jy  sigma=1.166960
! Fit after  self-cal, rms=0.054648Jy  sigma=1.165177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9801 mas, bmaj=1.193 mas, bpa=36.97 degrees
! Estimated noise=0.181694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539599 Jy
! Component: 100  -  total flux cleaned = 0.00064584 Jy
! Component: 150  -  total flux cleaned = 0.000722606 Jy
! Component: 200  -  total flux cleaned = 0.000792077 Jy
! Total flux subtracted in 200 components = 0.000792077 Jy
! Clean residual min=-0.000916 max=0.000879 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.278146 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.278147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054634Jy  sigma=1.164859
! Fit after  self-cal, rms=0.054637Jy  sigma=1.164836
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111627 Jy
! Component: 100  -  total flux cleaned = 0.000176654 Jy
! Component: 150  -  total flux cleaned = 0.000237617 Jy
! Component: 200  -  total flux cleaned = 0.000294254 Jy
! Total flux subtracted in 200 components = 0.000294254 Jy
! Clean residual min=-0.000902 max=0.000873 Jy/beam
! Clean residual mean=-0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.278441 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 92 components and 0.278441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054629Jy  sigma=1.164663
! Fit after  self-cal, rms=0.054628Jy  sigma=1.164652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054628Jy  sigma=1.164652
! Fit after  self-cal, rms=0.054598Jy  sigma=1.164629
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.373 mas, bpa=46.12 degrees
! Estimated noise=0.2421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.90994e-05 Jy
! Component: 100  -  total flux cleaned = 7.69738e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102889 Jy
! Component: 200  -  total flux cleaned = 0.000102983 Jy
! Total flux subtracted in 200 components = 0.000102983 Jy
! Clean residual min=-0.000982 max=0.000983 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.278544 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 106 components and 0.278544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054596Jy  sigma=1.164567
! Fit after  self-cal, rms=0.054594Jy  sigma=1.164530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.38568e-05 Jy
! Component: 100  -  total flux cleaned = 6.43946e-05 Jy
! Component: 150  -  total flux cleaned = 7.32649e-05 Jy
! Component: 200  -  total flux cleaned = 5.86227e-05 Jy
! Total flux subtracted in 200 components = 5.86227e-05 Jy
! Clean residual min=-0.000959 max=0.000955 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.278602 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.278602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054593Jy  sigma=1.164500
! Fit after  self-cal, rms=0.054591Jy  sigma=1.164479
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9793 mas, bmaj=1.192 mas, bpa=36.99 degrees
! Estimated noise=0.181623 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9793 x 1.192 at 36.99 degrees (North through East)
! Clean map  min=-0.0008367  max=0.1366 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7515 mas, bmaj=0.9116 mas, bpa=38.32 degrees
! Estimated noise=0.412001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104772 Jy
! Component: 100  -  total flux cleaned = 0.159395 Jy
! Component: 150  -  total flux cleaned = 0.191022 Jy
! Component: 200  -  total flux cleaned = 0.211457 Jy
! Total flux subtracted in 200 components = 0.211457 Jy
! Clean residual min=-0.004236 max=0.010870 Jy/beam
! Clean residual mean=0.000012 rms=0.001136 Jy/beam
! Combined flux in latest and established models = 0.211457 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.211457 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9793 mas, bmaj=1.192 mas, bpa=36.99 degrees
! Estimated noise=0.181623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202348 Jy
! Component: 100  -  total flux cleaned = 0.0320299 Jy
! Component: 150  -  total flux cleaned = 0.0398505 Jy
! Component: 200  -  total flux cleaned = 0.0454709 Jy
! Total flux subtracted in 200 components = 0.0454709 Jy
! Clean residual min=-0.001702 max=0.003225 Jy/beam
! Clean residual mean=0.000012 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.256928 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 43 components and 0.256928 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042386 Jy
! Component: 100  -  total flux cleaned = 0.00748576 Jy
! Component: 150  -  total flux cleaned = 0.0100013 Jy
! Component: 200  -  total flux cleaned = 0.0119761 Jy
! Total flux subtracted in 200 components = 0.0119761 Jy
! Clean residual min=-0.001095 max=0.001362 Jy/beam
! Clean residual mean=0.000004 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.268904 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 70 components and 0.268904 Jy
! Inverting map 
! Added new window around map position (0.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161816 Jy
! Component: 100  -  total flux cleaned = 0.00294964 Jy
! Component: 150  -  total flux cleaned = 0.00403849 Jy
! Component: 200  -  total flux cleaned = 0.0047854 Jy
! Total flux subtracted in 200 components = 0.0047854 Jy
! Clean residual min=-0.000933 max=0.000892 Jy/beam
! Clean residual mean=0.000002 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.273689 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 88 components and 0.273689 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.373 mas, bpa=46.12 degrees
! Estimated noise=0.2421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143234 Jy
! Component: 100  -  total flux cleaned = 0.00231898 Jy
! Component: 150  -  total flux cleaned = 0.00297233 Jy
! Component: 200  -  total flux cleaned = 0.00346841 Jy
! Total flux subtracted in 200 components = 0.00346841 Jy
! Clean residual min=-0.000987 max=0.000889 Jy/beam
! Clean residual mean=0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.277158 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354162 Jy
! Component: 100  -  total flux cleaned = 0.000493893 Jy
! Component: 150  -  total flux cleaned = 0.0006264 Jy
! Component: 200  -  total flux cleaned = 0.000740986 Jy
! Total flux subtracted in 200 components = 0.000740986 Jy
! Clean residual min=-0.000954 max=0.000916 Jy/beam
! Clean residual mean=0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.277899 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 133 components and 0.277899 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9793 mas, bmaj=1.192 mas, bpa=36.99 degrees
! Estimated noise=0.181623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.58255e-06 Jy
! Component: 100  -  total flux cleaned = 0.000220792 Jy
! Component: 150  -  total flux cleaned = 0.000310629 Jy
! Component: 200  -  total flux cleaned = 0.000391829 Jy
! Total flux subtracted in 200 components = 0.000391829 Jy
! Clean residual min=-0.000813 max=0.000805 Jy/beam
! Clean residual mean=0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.27829 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 153 components and 0.27829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054595Jy  sigma=1.164502
! Fit after  self-cal, rms=0.054590Jy  sigma=1.164396
wmodel J1127+5650_X_map.mod
! Writing 153 model components to file: J1127+5650_X_map.mod
wobs   J1127+5650_X_uvs.fits
! Writing UV FITS file: J1127+5650_X_uvs.fits
wwins  J1127+5650_X_map.win
! wwins: Wrote 7 windows to J1127+5650_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.96306e-06 Jy
! Component: 100  -  total flux cleaned = 1.49488e-05 Jy
! Component: 150  -  total flux cleaned = -3.91721e-05 Jy
! Component: 200  -  total flux cleaned = -9.18075e-05 Jy
! Component: 250  -  total flux cleaned = -0.000193776 Jy
! Component: 300  -  total flux cleaned = -0.000317846 Jy
! Component: 350  -  total flux cleaned = -0.000427073 Jy
! Component: 400  -  total flux cleaned = -0.000498447 Jy
! Component: 450  -  total flux cleaned = -0.000580607 Jy
! Component: 500  -  total flux cleaned = -0.000684666 Jy
! Component: 550  -  total flux cleaned = -0.000787101 Jy
! Component: 600  -  total flux cleaned = -0.000876898 Jy
! Component: 650  -  total flux cleaned = -0.000954601 Jy
! Component: 700  -  total flux cleaned = -0.00103127 Jy
! Component: 750  -  total flux cleaned = -0.00110688 Jy
! Component: 800  -  total flux cleaned = -0.00113886 Jy
! Component: 850  -  total flux cleaned = -0.00118121 Jy
! Component: 900  -  total flux cleaned = -0.00127503 Jy
! Component: 950  -  total flux cleaned = -0.00128528 Jy
! Component: 1000  -  total flux cleaned = -0.00133636 Jy
! Component: 1050  -  total flux cleaned = -0.00137677 Jy
! Component: 1100  -  total flux cleaned = -0.00141677 Jy
! Component: 1150  -  total flux cleaned = -0.00145622 Jy
! Component: 1200  -  total flux cleaned = -0.00149533 Jy
! Component: 1250  -  total flux cleaned = -0.00152428 Jy
! Component: 1300  -  total flux cleaned = -0.00157245 Jy
! Component: 1350  -  total flux cleaned = -0.00162973 Jy
! Component: 1400  -  total flux cleaned = -0.0016485 Jy
! Component: 1450  -  total flux cleaned = -0.00166718 Jy
! Component: 1500  -  total flux cleaned = -0.00170433 Jy
! Component: 1550  -  total flux cleaned = -0.00176874 Jy
! Component: 1600  -  total flux cleaned = -0.00180524 Jy
! Component: 1650  -  total flux cleaned = -0.00185054 Jy
! Component: 1700  -  total flux cleaned = -0.00187746 Jy
! Component: 1750  -  total flux cleaned = -0.00192208 Jy
! Component: 1800  -  total flux cleaned = -0.0019752 Jy
! Component: 1850  -  total flux cleaned = -0.00203676 Jy
! Component: 1900  -  total flux cleaned = -0.00208906 Jy
! Component: 1950  -  total flux cleaned = -0.0020977 Jy
! Component: 2000  -  total flux cleaned = -0.00219228 Jy
! Component: 2050  -  total flux cleaned = -0.00224344 Jy
! Component: 2100  -  total flux cleaned = -0.00226885 Jy
! Component: 2150  -  total flux cleaned = -0.00230261 Jy
! Component: 2200  -  total flux cleaned = -0.0023445 Jy
! Component: 2250  -  total flux cleaned = -0.00239426 Jy
! Component: 2300  -  total flux cleaned = -0.00244381 Jy
! Component: 2350  -  total flux cleaned = -0.00250944 Jy
! Component: 2400  -  total flux cleaned = -0.00255015 Jy
! Component: 2450  -  total flux cleaned = -0.0025501 Jy
! Component: 2500  -  total flux cleaned = -0.00260646 Jy
! Component: 2550  -  total flux cleaned = -0.00266248 Jy
! Component: 2600  -  total flux cleaned = -0.00268633 Jy
! Component: 2650  -  total flux cleaned = -0.00271789 Jy
! Component: 2700  -  total flux cleaned = -0.0027572 Jy
! Component: 2750  -  total flux cleaned = -0.00278839 Jy
! Component: 2800  -  total flux cleaned = -0.0028117 Jy
! Component: 2850  -  total flux cleaned = -0.00285802 Jy
! Component: 2900  -  total flux cleaned = -0.00289644 Jy
! Component: 2950  -  total flux cleaned = -0.00294978 Jy
! Component: 3000  -  total flux cleaned = -0.00296497 Jy
! Component: 3050  -  total flux cleaned = -0.00300267 Jy
! Component: 3100  -  total flux cleaned = -0.0030401 Jy
! Component: 3150  -  total flux cleaned = -0.00307744 Jy
! Component: 3200  -  total flux cleaned = -0.0030997 Jy
! Component: 3250  -  total flux cleaned = -0.00317344 Jy
! Component: 3300  -  total flux cleaned = -0.00315872 Jy
! Component: 3350  -  total flux cleaned = -0.00322441 Jy
! Component: 3400  -  total flux cleaned = -0.00324618 Jy
! Component: 3450  -  total flux cleaned = -0.00327512 Jy
! Component: 3500  -  total flux cleaned = -0.00333263 Jy
! Component: 3550  -  total flux cleaned = -0.00336833 Jy
! Component: 3600  -  total flux cleaned = -0.00340394 Jy
! Component: 3650  -  total flux cleaned = -0.00346056 Jy
! Component: 3700  -  total flux cleaned = -0.00349573 Jy
! Component: 3750  -  total flux cleaned = -0.00354475 Jy
! Component: 3800  -  total flux cleaned = -0.00353773 Jy
! Component: 3850  -  total flux cleaned = -0.00357241 Jy
! Component: 3900  -  total flux cleaned = -0.00360009 Jy
! Component: 3950  -  total flux cleaned = -0.00365507 Jy
! Component: 4000  -  total flux cleaned = -0.00364823 Jy
! Component: 4050  -  total flux cleaned = -0.00367546 Jy
! Total flux subtracted in 4096 components = -0.00369577 Jy
! Clean residual min=-0.000478 max=0.000432 Jy/beam
! Clean residual mean=0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.274595 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 469 components and 0.274594 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1127+5650_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9793 x 1.192 at 36.99 degrees (North through East)
! Clean map  min=-0.00054986  max=0.13575 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1127+5650_X_map.fits
wmodel /vlbi/uf001/uva//J1127+5650_X_map.mod
! Writing 469 model components to file: /vlbi/uf001/uva//J1127+5650_X_map.mod
wobs   /vlbi/uf001/uva//J1127+5650_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1127+5650_X_uvs.fits
wwins  /vlbi/uf001/uva//J1127+5650_X_map.win
! wwins: Wrote 8 windows to /vlbi/uf001/uva//J1127+5650_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.135752 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112377 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.248343 0.248343 0.496685 0.99337 1.98674 3.97348 7.94696 15.8939 31.7878 63.5757
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1208.01 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1127+5650_X_dfm.log closed on Mon Jan 14 01:19:04 2019