! Started logfile: /vlbi/uf001/uva//J1126-0555_X_dfm.log on Mon Jan 14 01:18:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1126-0555_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1126-0555_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.994636 visibilities/baseline/integration-bin.
! Found source: J1126-0555
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 46728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1126-0555_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001502Jy  sigma=22.605355
! Fit after  self-cal, rms=0.931446Jy  sigma=20.969991
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6644 mas, bmaj=1.673 mas, bpa=-3.923 degrees
! Estimated noise=0.305827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476267 Jy
! Component: 100  -  total flux cleaned = 0.0647805 Jy
! Total flux subtracted in 100 components = 0.0647805 Jy
! Clean residual min=-0.005095 max=0.017424 Jy/beam
! Clean residual mean=0.000002 rms=0.001162 Jy/beam
! Combined flux in latest and established models = 0.0647805 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0647805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065069Jy  sigma=1.435376
! Fit after  self-cal, rms=0.064425Jy  sigma=1.421780
! Inverting map 
! Added new window around map position (1, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157244 Jy
! Component: 100  -  total flux cleaned = 0.0252825 Jy
! Total flux subtracted in 100 components = 0.0252825 Jy
! Clean residual min=-0.003306 max=0.008176 Jy/beam
! Clean residual mean=0.000001 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.090063 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.090063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058962Jy  sigma=1.288843
! Fit after  self-cal, rms=0.058645Jy  sigma=1.281498
! Inverting map 
! Added new window around map position (0.8, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00910773 Jy
! Component: 100  -  total flux cleaned = 0.0147345 Jy
! Total flux subtracted in 100 components = 0.0147345 Jy
! Clean residual min=-0.002625 max=0.003992 Jy/beam
! Clean residual mean=0.000001 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.104797 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.104797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056670Jy  sigma=1.233333
! Fit after  self-cal, rms=0.056573Jy  sigma=1.231296
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480651 Jy
! Component: 100  -  total flux cleaned = 0.00796014 Jy
! Total flux subtracted in 100 components = 0.00796014 Jy
! Clean residual min=-0.002208 max=0.002976 Jy/beam
! Clean residual mean=0.000001 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.112758 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.112758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055957Jy  sigma=1.216100
! Fit after  self-cal, rms=0.055918Jy  sigma=1.215316
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8389 mas, bmaj=2.016 mas, bpa=-3.167 degrees
! Estimated noise=0.148938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443185 Jy
! Component: 100  -  total flux cleaned = 0.00717752 Jy
! Component: 150  -  total flux cleaned = 0.00917495 Jy
! Component: 200  -  total flux cleaned = 0.0106496 Jy
! Total flux subtracted in 200 components = 0.0106496 Jy
! Clean residual min=-0.002169 max=0.002098 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.123407 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.123407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055534Jy  sigma=1.205405
! Fit after  self-cal, rms=0.055514Jy  sigma=1.204800
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8389 x 2.016 at -3.167 degrees (North through East)
! Clean map  min=-0.0019733  max=0.063929 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        0.94     KP        1.04     
!   LA        1.00     MK        0.99     NL        1.13     OV        0.92     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.01     KP        1.01     
!   LA        0.95     MK        1.01     NL        1.11     OV        0.94     
!   PT        0.94     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.95     KP        1.05     
!   LA        0.96     MK        1.04     NL        1.09     OV        0.93     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.04     HN        0.93     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.11     OV        0.91     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.92     KP        1.07     
!   LA        1.00     MK        0.97     NL        1.15     OV        0.91     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.93     KP        1.05     
!   LA        0.98     MK        1.04     NL        1.14     OV        0.91     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.97     KP        1.09     
!   LA        0.98     MK        1.02     NL        1.14     OV        0.90     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.95     KP        1.01     
!   LA        0.97     MK        1.04     NL        1.15     OV        0.94     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.03     HN        0.98     KP        1.06     
!   LA        0.97     MK        1.03     NL        1.13     OV        0.90     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.97     KP        1.03     
!   LA        0.95     MK        1.03     NL        1.12     OV        0.91     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.88     KP        1.08     
!   LA        0.98     MK        1.01     NL        1.16     OV        0.91     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        1.02     KP        1.05     
!   LA        0.97     MK        1.00     NL        1.10     OV        0.93     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.055514Jy  sigma=1.204800
! Fit after  self-cal, rms=0.055322Jy  sigma=1.195124
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8385 mas, bmaj=2.031 mas, bpa=-3.017 degrees
! Estimated noise=0.149815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254594 Jy
! Component: 100  -  total flux cleaned = -0.000209072 Jy
! Component: 150  -  total flux cleaned = -0.000258686 Jy
! Component: 200  -  total flux cleaned = -0.000346185 Jy
! Total flux subtracted in 200 components = -0.000346185 Jy
! Clean residual min=-0.001030 max=0.000979 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.123061 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 45 components and 0.123061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055271Jy  sigma=1.194054
! Fit after  self-cal, rms=0.055304Jy  sigma=1.193696
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055304Jy  sigma=1.193696
! Fit after  self-cal, rms=0.055293Jy  sigma=1.191676
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8367 mas, bmaj=2.033 mas, bpa=-2.906 degrees
! Estimated noise=0.149789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164597 Jy
! Component: 100  -  total flux cleaned = 0.000120936 Jy
! Component: 150  -  total flux cleaned = 4.57493e-05 Jy
! Component: 200  -  total flux cleaned = -1.88744e-05 Jy
! Total flux subtracted in 200 components = -1.88744e-05 Jy
! Clean residual min=-0.000980 max=0.000921 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.123042 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.123042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055273Jy  sigma=1.191288
! Fit after  self-cal, rms=0.055276Jy  sigma=1.191190
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.01985e-05 Jy
! Component: 100  -  total flux cleaned = 5.62915e-05 Jy
! Component: 150  -  total flux cleaned = 1.56411e-05 Jy
! Component: 200  -  total flux cleaned = -3.10918e-05 Jy
! Total flux subtracted in 200 components = -3.10918e-05 Jy
! Clean residual min=-0.000979 max=0.000888 Jy/beam
! Clean residual mean=0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.123011 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.123011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055267Jy  sigma=1.191026
! Fit after  self-cal, rms=0.055264Jy  sigma=1.190983
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055264Jy  sigma=1.190983
! Fit after  self-cal, rms=0.055237Jy  sigma=1.190132
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8353 mas, bmaj=2.032 mas, bpa=-2.825 degrees
! Estimated noise=0.149464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.8168e-05 Jy
! Component: 100  -  total flux cleaned = 7.67334e-05 Jy
! Component: 150  -  total flux cleaned = 3.87355e-05 Jy
! Component: 200  -  total flux cleaned = 5.97376e-06 Jy
! Total flux subtracted in 200 components = 5.97376e-06 Jy
! Clean residual min=-0.000947 max=0.000810 Jy/beam
! Clean residual mean=0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.123017 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.123017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055228Jy  sigma=1.189974
! Fit after  self-cal, rms=0.055231Jy  sigma=1.189927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.08028e-06 Jy
! Component: 100  -  total flux cleaned = 2.74086e-05 Jy
! Component: 150  -  total flux cleaned = 8.35038e-06 Jy
! Component: 200  -  total flux cleaned = -1.71119e-05 Jy
! Total flux subtracted in 200 components = -1.71119e-05 Jy
! Clean residual min=-0.000947 max=0.000796 Jy/beam
! Clean residual mean=0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.123 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 0.123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055226Jy  sigma=1.189850
! Fit after  self-cal, rms=0.055225Jy  sigma=1.189829
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055225Jy  sigma=1.189829
! Fit after  self-cal, rms=0.055148Jy  sigma=1.189802
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=3.578 mas, bpa=-2.175 degrees
! Estimated noise=0.195274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261103 Jy
! Component: 100  -  total flux cleaned = 0.000258106 Jy
! Component: 150  -  total flux cleaned = 0.000240054 Jy
! Component: 200  -  total flux cleaned = 0.000232416 Jy
! Total flux subtracted in 200 components = 0.000232416 Jy
! Clean residual min=-0.000934 max=0.000721 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.123232 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 71 components and 0.123232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055148Jy  sigma=1.189804
! Fit after  self-cal, rms=0.055148Jy  sigma=1.189760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.88466e-08 Jy
! Component: 100  -  total flux cleaned = 1.70837e-05 Jy
! Component: 150  -  total flux cleaned = 1.12345e-05 Jy
! Component: 200  -  total flux cleaned = 1.69265e-06 Jy
! Total flux subtracted in 200 components = 1.69265e-06 Jy
! Clean residual min=-0.000939 max=0.000724 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.123234 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 76 components and 0.123234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055149Jy  sigma=1.189792
! Fit after  self-cal, rms=0.055148Jy  sigma=1.189765
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8349 mas, bmaj=2.031 mas, bpa=-2.727 degrees
! Estimated noise=0.149292 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8349 x 2.031 at -2.727 degrees (North through East)
! Clean map  min=-0.00091145  max=0.062795 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.661 mas, bmaj=1.684 mas, bpa=-3.444 degrees
! Estimated noise=0.307474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0485643 Jy
! Component: 100  -  total flux cleaned = 0.0713466 Jy
! Component: 150  -  total flux cleaned = 0.0860681 Jy
! Component: 200  -  total flux cleaned = 0.0957496 Jy
! Total flux subtracted in 200 components = 0.0957496 Jy
! Clean residual min=-0.002758 max=0.005237 Jy/beam
! Clean residual mean=0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0957496 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0957496 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8349 mas, bmaj=2.031 mas, bpa=-2.727 degrees
! Estimated noise=0.149292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998275 Jy
! Component: 100  -  total flux cleaned = 0.0158059 Jy
! Component: 150  -  total flux cleaned = 0.0194385 Jy
! Component: 200  -  total flux cleaned = 0.0218248 Jy
! Total flux subtracted in 200 components = 0.0218248 Jy
! Clean residual min=-0.001182 max=0.001491 Jy/beam
! Clean residual mean=0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.117574 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 43 components and 0.117574 Jy
! Inverting map 
! Added new window around map position (-0.2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165461 Jy
! Component: 100  -  total flux cleaned = 0.00280349 Jy
! Component: 150  -  total flux cleaned = 0.00365926 Jy
! Component: 200  -  total flux cleaned = 0.00430558 Jy
! Total flux subtracted in 200 components = 0.00430558 Jy
! Clean residual min=-0.000990 max=0.000888 Jy/beam
! Clean residual mean=0.000001 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.12188 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 63 components and 0.12188 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=3.578 mas, bpa=-2.175 degrees
! Estimated noise=0.195274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758864 Jy
! Component: 100  -  total flux cleaned = 0.000917951 Jy
! Component: 150  -  total flux cleaned = 0.000951437 Jy
! Component: 200  -  total flux cleaned = 0.000970396 Jy
! Total flux subtracted in 200 components = 0.000970396 Jy
! Clean residual min=-0.000922 max=0.000752 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.12285 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.45594e-06 Jy
! Component: 100  -  total flux cleaned = 1.71177e-05 Jy
! Component: 150  -  total flux cleaned = 1.69539e-05 Jy
! Component: 200  -  total flux cleaned = 1.68284e-05 Jy
! Total flux subtracted in 200 components = 1.68284e-05 Jy
! Clean residual min=-0.000917 max=0.000741 Jy/beam
! Clean residual mean=0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.122867 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 0.122867 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8349 mas, bmaj=2.031 mas, bpa=-2.727 degrees
! Estimated noise=0.149292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140284 Jy
! Component: 100  -  total flux cleaned = -0.000140824 Jy
! Component: 150  -  total flux cleaned = -0.000126179 Jy
! Component: 200  -  total flux cleaned = -0.000113105 Jy
! Total flux subtracted in 200 components = -0.000113105 Jy
! Clean residual min=-0.000973 max=0.000777 Jy/beam
! Clean residual mean=0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.122754 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 92 components and 0.122754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055139Jy  sigma=1.189632
! Fit after  self-cal, rms=0.055130Jy  sigma=1.189492
wmodel J1126-0555_X_map.mod
! Writing 92 model components to file: J1126-0555_X_map.mod
wobs   J1126-0555_X_uvs.fits
! Writing UV FITS file: J1126-0555_X_uvs.fits
wwins  J1126-0555_X_map.win
! wwins: Wrote 4 windows to J1126-0555_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169142 Jy
! Component: 100  -  total flux cleaned = -0.000127253 Jy
! Component: 150  -  total flux cleaned = -0.000101359 Jy
! Component: 200  -  total flux cleaned = -8.90982e-05 Jy
! Component: 250  -  total flux cleaned = -6.59594e-05 Jy
! Component: 300  -  total flux cleaned = -2.09414e-05 Jy
! Component: 350  -  total flux cleaned = 3.38888e-05 Jy
! Component: 400  -  total flux cleaned = 1.23265e-05 Jy
! Component: 450  -  total flux cleaned = -1.89898e-05 Jy
! Component: 500  -  total flux cleaned = -2.91618e-05 Jy
! Component: 550  -  total flux cleaned = -2.91876e-05 Jy
! Component: 600  -  total flux cleaned = -4.91407e-05 Jy
! Component: 650  -  total flux cleaned = -5.89773e-05 Jy
! Component: 700  -  total flux cleaned = -4.94917e-05 Jy
! Component: 750  -  total flux cleaned = -5.93577e-05 Jy
! Component: 800  -  total flux cleaned = -8.77774e-05 Jy
! Component: 850  -  total flux cleaned = -7.8371e-05 Jy
! Component: 900  -  total flux cleaned = -6.92408e-05 Jy
! Component: 950  -  total flux cleaned = -6.92665e-05 Jy
! Component: 1000  -  total flux cleaned = -8.71141e-05 Jy
! Component: 1050  -  total flux cleaned = -5.13976e-05 Jy
! Component: 1100  -  total flux cleaned = -6.01442e-05 Jy
! Component: 1150  -  total flux cleaned = -6.00933e-05 Jy
! Component: 1200  -  total flux cleaned = -4.27661e-05 Jy
! Component: 1250  -  total flux cleaned = -1.70879e-05 Jy
! Component: 1300  -  total flux cleaned = -2.56362e-05 Jy
! Component: 1350  -  total flux cleaned = -2.56508e-05 Jy
! Component: 1400  -  total flux cleaned = -4.23344e-05 Jy
! Component: 1450  -  total flux cleaned = -2.57259e-05 Jy
! Component: 1500  -  total flux cleaned = -1.75374e-05 Jy
! Component: 1550  -  total flux cleaned = -2.5744e-05 Jy
! Component: 1600  -  total flux cleaned = 6.66974e-06 Jy
! Component: 1650  -  total flux cleaned = 3.86213e-05 Jy
! Component: 1700  -  total flux cleaned = 7.04207e-05 Jy
! Component: 1750  -  total flux cleaned = 9.39783e-05 Jy
! Component: 1800  -  total flux cleaned = 0.000101736 Jy
! Component: 1850  -  total flux cleaned = 7.84183e-05 Jy
! Component: 1900  -  total flux cleaned = 7.06515e-05 Jy
! Component: 1950  -  total flux cleaned = 7.83545e-05 Jy
! Component: 2000  -  total flux cleaned = 8.59975e-05 Jy
! Component: 2050  -  total flux cleaned = 7.08969e-05 Jy
! Component: 2100  -  total flux cleaned = 6.34416e-05 Jy
! Component: 2150  -  total flux cleaned = 7.0947e-05 Jy
! Component: 2200  -  total flux cleaned = 4.86954e-05 Jy
! Component: 2250  -  total flux cleaned = -2.72725e-06 Jy
! Component: 2300  -  total flux cleaned = 4.84341e-05 Jy
! Component: 2350  -  total flux cleaned = 2.66145e-05 Jy
! Component: 2400  -  total flux cleaned = -2.22593e-06 Jy
! Component: 2450  -  total flux cleaned = -2.23836e-06 Jy
! Component: 2500  -  total flux cleaned = -1.65499e-05 Jy
! Component: 2550  -  total flux cleaned = -3.07261e-05 Jy
! Component: 2600  -  total flux cleaned = -3.07053e-05 Jy
! Component: 2650  -  total flux cleaned = -3.76591e-05 Jy
! Component: 2700  -  total flux cleaned = -7.25628e-05 Jy
! Component: 2750  -  total flux cleaned = -7.25957e-05 Jy
! Component: 2800  -  total flux cleaned = -5.87773e-05 Jy
! Component: 2850  -  total flux cleaned = -0.000120474 Jy
! Component: 2900  -  total flux cleaned = -0.00014769 Jy
! Component: 2950  -  total flux cleaned = -0.000168034 Jy
! Component: 3000  -  total flux cleaned = -0.000181481 Jy
! Component: 3050  -  total flux cleaned = -0.000208265 Jy
! Component: 3100  -  total flux cleaned = -0.00021497 Jy
! Component: 3150  -  total flux cleaned = -0.00022162 Jy
! Component: 3200  -  total flux cleaned = -0.000195226 Jy
! Component: 3250  -  total flux cleaned = -0.000247783 Jy
! Component: 3300  -  total flux cleaned = -0.000247801 Jy
! Component: 3350  -  total flux cleaned = -0.000267248 Jy
! Component: 3400  -  total flux cleaned = -0.000267211 Jy
! Component: 3450  -  total flux cleaned = -0.000260699 Jy
! Component: 3500  -  total flux cleaned = -0.000254304 Jy
! Component: 3550  -  total flux cleaned = -0.000241529 Jy
! Component: 3600  -  total flux cleaned = -0.000260531 Jy
! Component: 3650  -  total flux cleaned = -0.000254248 Jy
! Component: 3700  -  total flux cleaned = -0.000254222 Jy
! Component: 3750  -  total flux cleaned = -0.00022921 Jy
! Component: 3800  -  total flux cleaned = -0.000229222 Jy
! Component: 3850  -  total flux cleaned = -0.000247748 Jy
! Component: 3900  -  total flux cleaned = -0.000204573 Jy
! Component: 3950  -  total flux cleaned = -0.000247566 Jy
! Component: 4000  -  total flux cleaned = -0.000235355 Jy
! Component: 4050  -  total flux cleaned = -0.000211039 Jy
! Total flux subtracted in 4096 components = -0.000235287 Jy
! Clean residual min=-0.000335 max=0.000325 Jy/beam
! Clean residual mean=0.000000 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.122519 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 396 components and 0.122519 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1126-0555_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8349 x 2.031 at -2.727 degrees (North through East)
! Clean map  min=-0.00071597  max=0.062491 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1126-0555_X_map.fits
wmodel /vlbi/uf001/uva//J1126-0555_X_map.mod
! Writing 396 model components to file: /vlbi/uf001/uva//J1126-0555_X_map.mod
wobs   /vlbi/uf001/uva//J1126-0555_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1126-0555_X_uvs.fits
wwins  /vlbi/uf001/uva//J1126-0555_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1126-0555_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.062491 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000105447 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.506218 0.506218 1.01244 2.02487 4.04975 8.09949 16.199 32.398 64.7959
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.062 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  592.629 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1126-0555_X_dfm.log closed on Mon Jan 14 01:18:27 2019