! Started logfile: /vlbi/uf001/uvm//J1125+0001_S_a_dfm.log on Sun Jan 13 21:27:09 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1125+0001_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1125+0001_S_a_uvm.fits
! AN table 1: 88 integrations on 36 of 36 possible baselines.
! AN table 2: 118 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.934642 visibilities/baseline/integration-bin.
! Found source: J1125+0001
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 18147 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1125+0001_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
!  A total of 50 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.015279Jy  sigma=19.813979
! Fit after  self-cal, rms=0.892493Jy  sigma=17.349188
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.84 mas, bmaj=14.59 mas, bpa=-18.51 degrees
! Estimated noise=0.501512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.086224 Jy
! Component: 100  -  total flux cleaned = 0.105842 Jy
! Total flux subtracted in 100 components = 0.105842 Jy
! Clean residual min=-0.004247 max=0.006755 Jy/beam
! Clean residual mean=0.000016 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.105842 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.105842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079573Jy  sigma=1.291537
! Fit after  self-cal, rms=0.079286Jy  sigma=1.286149
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=14.03 mas, bpa=-17.91 degrees
! Estimated noise=0.28206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00824583 Jy
! Component: 100  -  total flux cleaned = 0.012034 Jy
! Component: 150  -  total flux cleaned = 0.0146512 Jy
! Component: 200  -  total flux cleaned = 0.0165338 Jy
! Total flux subtracted in 200 components = 0.0165338 Jy
! Clean residual min=-0.003432 max=0.004022 Jy/beam
! Clean residual mean=0.000009 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.122375 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 41 components and 0.122375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078496Jy  sigma=1.266435
! Fit after  self-cal, rms=0.078530Jy  sigma=1.266258
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.422 x 14.03 at -17.91 degrees (North through East)
! Clean map  min=-0.0033748  max=0.11177 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.98     FD        1.06     HN        1.06     KP        1.03     
!   LA        0.94     MK        1.08     NL        1.10     OV        1.02     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.89     FD        0.89     HN        0.99     KP        0.95     
!   LA        0.96     MK        1.00     NL        1.01     OV        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.96     FD        1.10     HN        1.01     KP        1.08     
!   LA        0.92     MK        1.03     NL        1.11     OV        0.85     
!   PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.77     FD        0.92     HN        0.99     KP        0.92     
!   LA        0.99     MK        1.02     NL        0.95     OV        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.84     FD        1.08     HN        0.99     KP        1.07     
!   LA        0.92     MK        1.07     NL        1.04     OV        0.96     
!   PT        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.86     FD        0.91     HN        0.98     KP        0.96     
!   LA        0.94     MK        1.02     NL        1.04     OV        0.97     
! 
! 
! Fit before self-cal, rms=0.078530Jy  sigma=1.266258
! Fit after  self-cal, rms=0.094466Jy  sigma=1.227025
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.446 mas, bmaj=14.3 mas, bpa=-17.89 degrees
! Estimated noise=0.282047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000976529 Jy
! Component: 100  -  total flux cleaned = -0.00133912 Jy
! Component: 150  -  total flux cleaned = -0.0016126 Jy
! Component: 200  -  total flux cleaned = -0.00184037 Jy
! Total flux subtracted in 200 components = -0.00184037 Jy
! Clean residual min=-0.002196 max=0.001843 Jy/beam
! Clean residual mean=0.000004 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.120535 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.120535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094438Jy  sigma=1.226722
! Fit after  self-cal, rms=0.094725Jy  sigma=1.225975
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094725Jy  sigma=1.225975
! Fit after  self-cal, rms=0.094631Jy  sigma=1.219058
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=14.31 mas, bpa=-17.92 degrees
! Estimated noise=0.281341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000359075 Jy
! Component: 100  -  total flux cleaned = -0.000580119 Jy
! Component: 150  -  total flux cleaned = -0.000753505 Jy
! Component: 200  -  total flux cleaned = -0.000890773 Jy
! Total flux subtracted in 200 components = -0.000890773 Jy
! Clean residual min=-0.001660 max=0.001206 Jy/beam
! Clean residual mean=0.000005 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.119644 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.119644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094628Jy  sigma=1.218931
! Fit after  self-cal, rms=0.094619Jy  sigma=1.218821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.66953e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116807 Jy
! Component: 150  -  total flux cleaned = -0.000143497 Jy
! Component: 200  -  total flux cleaned = -0.000155817 Jy
! Total flux subtracted in 200 components = -0.000155817 Jy
! Clean residual min=-0.001642 max=0.001190 Jy/beam
! Clean residual mean=0.000005 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.119488 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 90 components and 0.119488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094619Jy  sigma=1.218786
! Fit after  self-cal, rms=0.094618Jy  sigma=1.218784
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094618Jy  sigma=1.218784
! Fit after  self-cal, rms=0.095212Jy  sigma=1.218740
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=14.35 mas, bpa=-17.93 degrees
! Estimated noise=0.281116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352657 Jy
! Component: 100  -  total flux cleaned = -0.000482008 Jy
! Component: 150  -  total flux cleaned = -0.00059187 Jy
! Component: 200  -  total flux cleaned = -0.0006258 Jy
! Total flux subtracted in 200 components = -0.0006258 Jy
! Clean residual min=-0.001616 max=0.001190 Jy/beam
! Clean residual mean=0.000005 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.118863 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.118863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095211Jy  sigma=1.218683
! Fit after  self-cal, rms=0.095213Jy  sigma=1.218679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85473e-05 Jy
! Component: 100  -  total flux cleaned = -6.19202e-05 Jy
! Component: 150  -  total flux cleaned = -7.24753e-05 Jy
! Component: 200  -  total flux cleaned = -8.74743e-05 Jy
! Total flux subtracted in 200 components = -8.74743e-05 Jy
! Clean residual min=-0.001605 max=0.001188 Jy/beam
! Clean residual mean=0.000005 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.118775 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.118775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095213Jy  sigma=1.218659
! Fit after  self-cal, rms=0.095212Jy  sigma=1.218658
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095212Jy  sigma=1.218658
! Fit after  self-cal, rms=0.095557Jy  sigma=1.218632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.304 mas, bmaj=14.81 mas, bpa=-12.24 degrees
! Estimated noise=0.338223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258427 Jy
! Component: 100  -  total flux cleaned = -0.00028961 Jy
! Component: 150  -  total flux cleaned = -0.000296316 Jy
! Component: 200  -  total flux cleaned = -0.000309259 Jy
! Total flux subtracted in 200 components = -0.000309259 Jy
! Clean residual min=-0.001843 max=0.001587 Jy/beam
! Clean residual mean=0.000009 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.118466 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.118466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095556Jy  sigma=1.218610
! Fit after  self-cal, rms=0.095558Jy  sigma=1.218611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.01442e-08 Jy
! Component: 100  -  total flux cleaned = -3.88924e-07 Jy
! Component: 150  -  total flux cleaned = -1.17392e-05 Jy
! Component: 200  -  total flux cleaned = -2.72348e-05 Jy
! Total flux subtracted in 200 components = -2.72348e-05 Jy
! Clean residual min=-0.001850 max=0.001587 Jy/beam
! Clean residual mean=0.000009 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.118439 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 119 components and 0.118439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095557Jy  sigma=1.218616
! Fit after  self-cal, rms=0.095557Jy  sigma=1.218614
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=14.38 mas, bpa=-17.93 degrees
! Estimated noise=0.280912 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.45 x 14.38 at -17.93 degrees (North through East)
! Clean map  min=-0.0016194  max=0.11124 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=14.95 mas, bpa=-18.58 degrees
! Estimated noise=0.50836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874599 Jy
! Component: 100  -  total flux cleaned = 0.106799 Jy
! Component: 150  -  total flux cleaned = 0.112554 Jy
! Component: 200  -  total flux cleaned = 0.115438 Jy
! Total flux subtracted in 200 components = 0.115438 Jy
! Clean residual min=-0.002313 max=0.002670 Jy/beam
! Clean residual mean=0.000007 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.115438 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.115438 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=14.38 mas, bpa=-17.93 degrees
! Estimated noise=0.280912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194165 Jy
! Component: 100  -  total flux cleaned = 0.00251315 Jy
! Component: 150  -  total flux cleaned = 0.00265372 Jy
! Component: 200  -  total flux cleaned = 0.00280816 Jy
! Total flux subtracted in 200 components = 0.00280816 Jy
! Clean residual min=-0.001493 max=0.001159 Jy/beam
! Clean residual mean=0.000005 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.118246 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 39 components and 0.118246 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.304 mas, bmaj=14.81 mas, bpa=-12.24 degrees
! Estimated noise=0.338223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00036653 Jy
! Component: 100  -  total flux cleaned = 0.000417446 Jy
! Component: 150  -  total flux cleaned = 0.000416638 Jy
! Component: 200  -  total flux cleaned = 0.000428685 Jy
! Total flux subtracted in 200 components = 0.000428685 Jy
! Clean residual min=-0.001815 max=0.001561 Jy/beam
! Clean residual mean=0.000009 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.118675 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.6288e-07 Jy
! Component: 100  -  total flux cleaned = 2.5996e-07 Jy
! Component: 150  -  total flux cleaned = 1.0106e-05 Jy
! Component: 200  -  total flux cleaned = 9.99333e-06 Jy
! Total flux subtracted in 200 components = 9.99333e-06 Jy
! Clean residual min=-0.001834 max=0.001562 Jy/beam
! Clean residual mean=0.000009 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.118685 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 64 components and 0.118685 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=14.38 mas, bpa=-17.93 degrees
! Estimated noise=0.280912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120452 Jy
! Component: 100  -  total flux cleaned = 0.000171221 Jy
! Component: 150  -  total flux cleaned = 0.000182429 Jy
! Component: 200  -  total flux cleaned = 0.000182144 Jy
! Total flux subtracted in 200 components = 0.000182144 Jy
! Clean residual min=-0.001660 max=0.001190 Jy/beam
! Clean residual mean=0.000005 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.118867 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.118867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095568Jy  sigma=1.218558
! Fit after  self-cal, rms=0.095551Jy  sigma=1.218543
wmodel J1125+0001_S_a_map.mod
! Writing 75 model components to file: J1125+0001_S_a_map.mod
wobs   J1125+0001_S_a_uvs.fits
! Writing UV FITS file: J1125+0001_S_a_uvs.fits
wwins  J1125+0001_S_a_map.win
! wwins: Wrote 1 windows to J1125+0001_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000688318 Jy
! Component: 100  -  total flux cleaned = -0.000985529 Jy
! Component: 150  -  total flux cleaned = -0.00109151 Jy
! Component: 200  -  total flux cleaned = -0.00117277 Jy
! Component: 250  -  total flux cleaned = -0.00127083 Jy
! Component: 300  -  total flux cleaned = -0.00136541 Jy
! Component: 350  -  total flux cleaned = -0.00143912 Jy
! Component: 400  -  total flux cleaned = -0.00151066 Jy
! Component: 450  -  total flux cleaned = -0.00158047 Jy
! Component: 500  -  total flux cleaned = -0.00164882 Jy
! Component: 550  -  total flux cleaned = -0.00169888 Jy
! Component: 600  -  total flux cleaned = -0.00176466 Jy
! Component: 650  -  total flux cleaned = -0.00182895 Jy
! Component: 700  -  total flux cleaned = -0.00187637 Jy
! Component: 750  -  total flux cleaned = -0.00190719 Jy
! Component: 800  -  total flux cleaned = -0.00193759 Jy
! Component: 850  -  total flux cleaned = -0.00196708 Jy
! Component: 900  -  total flux cleaned = -0.00201085 Jy
! Component: 950  -  total flux cleaned = -0.00206835 Jy
! Component: 1000  -  total flux cleaned = -0.00205412 Jy
! Component: 1050  -  total flux cleaned = -0.00212398 Jy
! Component: 1100  -  total flux cleaned = -0.00213784 Jy
! Component: 1150  -  total flux cleaned = -0.00217827 Jy
! Component: 1200  -  total flux cleaned = -0.00216482 Jy
! Component: 1250  -  total flux cleaned = -0.00220437 Jy
! Component: 1300  -  total flux cleaned = -0.00224344 Jy
! Component: 1350  -  total flux cleaned = -0.00226884 Jy
! Component: 1400  -  total flux cleaned = -0.00226884 Jy
! Component: 1450  -  total flux cleaned = -0.00231909 Jy
! Component: 1500  -  total flux cleaned = -0.00234381 Jy
! Component: 1550  -  total flux cleaned = -0.00239284 Jy
! Component: 1600  -  total flux cleaned = -0.00238066 Jy
! Component: 1650  -  total flux cleaned = -0.00240477 Jy
! Component: 1700  -  total flux cleaned = -0.00241659 Jy
! Component: 1750  -  total flux cleaned = -0.00241665 Jy
! Component: 1800  -  total flux cleaned = -0.00242844 Jy
! Component: 1850  -  total flux cleaned = -0.00245153 Jy
! Component: 1900  -  total flux cleaned = -0.00245156 Jy
! Component: 1950  -  total flux cleaned = -0.00247422 Jy
! Component: 2000  -  total flux cleaned = -0.0024967 Jy
! Component: 2050  -  total flux cleaned = -0.00251896 Jy
! Component: 2100  -  total flux cleaned = -0.00254105 Jy
! Component: 2150  -  total flux cleaned = -0.00261742 Jy
! Component: 2200  -  total flux cleaned = -0.0025957 Jy
! Component: 2250  -  total flux cleaned = -0.00262788 Jy
! Component: 2300  -  total flux cleaned = -0.00260675 Jy
! Component: 2350  -  total flux cleaned = -0.00267017 Jy
! Component: 2400  -  total flux cleaned = -0.00270151 Jy
! Component: 2450  -  total flux cleaned = -0.00270146 Jy
! Component: 2500  -  total flux cleaned = -0.00272211 Jy
! Component: 2550  -  total flux cleaned = -0.00273233 Jy
! Component: 2600  -  total flux cleaned = -0.00275247 Jy
! Component: 2650  -  total flux cleaned = -0.00278265 Jy
! Component: 2700  -  total flux cleaned = -0.00281246 Jy
! Component: 2750  -  total flux cleaned = -0.00281249 Jy
! Component: 2800  -  total flux cleaned = -0.00281249 Jy
! Component: 2850  -  total flux cleaned = -0.00283194 Jy
! Component: 2900  -  total flux cleaned = -0.00286092 Jy
! Component: 2950  -  total flux cleaned = -0.00290889 Jy
! Component: 3000  -  total flux cleaned = -0.00297559 Jy
! Component: 3050  -  total flux cleaned = -0.00297548 Jy
! Component: 3100  -  total flux cleaned = -0.00301304 Jy
! Component: 3150  -  total flux cleaned = -0.00304098 Jy
! Component: 3200  -  total flux cleaned = -0.00307799 Jy
! Component: 3250  -  total flux cleaned = -0.00312407 Jy
! Component: 3300  -  total flux cleaned = -0.00316058 Jy
! Component: 3350  -  total flux cleaned = -0.00317876 Jy
! Component: 3400  -  total flux cleaned = -0.00321485 Jy
! Component: 3450  -  total flux cleaned = -0.00328651 Jy
! Component: 3500  -  total flux cleaned = -0.00328642 Jy
! Component: 3550  -  total flux cleaned = -0.0033394 Jy
! Component: 3600  -  total flux cleaned = -0.00333062 Jy
! Component: 3650  -  total flux cleaned = -0.00335683 Jy
! Component: 3700  -  total flux cleaned = -0.00339151 Jy
! Component: 3750  -  total flux cleaned = -0.00341745 Jy
! Component: 3800  -  total flux cleaned = -0.00345177 Jy
! Component: 3850  -  total flux cleaned = -0.00344328 Jy
! Component: 3900  -  total flux cleaned = -0.00345176 Jy
! Component: 3950  -  total flux cleaned = -0.00351915 Jy
! Component: 4000  -  total flux cleaned = -0.00350235 Jy
! Component: 4050  -  total flux cleaned = -0.00355241 Jy
! Total flux subtracted in 4096 components = -0.00354406 Jy
! Clean residual min=-0.000513 max=0.000534 Jy/beam
! Clean residual mean=0.000001 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.115323 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 357 components and 0.115323 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1125+0001_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.45 x 14.38 at -17.93 degrees (North through East)
! Clean map  min=-0.0012235  max=0.11133 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1125+0001_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1125+0001_S_a_map.mod
! Writing 357 model components to file: /vlbi/uf001/uvm//J1125+0001_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1125+0001_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1125+0001_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1125+0001_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1125+0001_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.111328 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000159272 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.429196 0.429196 0.858393 1.71679 3.43357 6.86714 13.7343 27.4686 54.9371
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.111 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  698.98 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1125+0001_S_a_dfm.log closed on Sun Jan 13 21:27:14 2019