! Started logfile: /vlbi/uf001/uva//J1124+6555_X_dfm.log on Mon Jan 14 01:17:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1124+6555_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1124+6555_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.850585 visibilities/baseline/integration-bin. ! Found source: J1124+6555 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 34908 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1124+6555_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003604Jy sigma=23.660896 ! Fit after self-cal, rms=0.942281Jy sigma=22.171299 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.797 mas, bmaj=1.027 mas, bpa=59.49 degrees ! Estimated noise=0.341397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414836 Jy ! Component: 100 - total flux cleaned = 0.0547123 Jy ! Total flux subtracted in 100 components = 0.0547123 Jy ! Clean residual min=-0.003310 max=0.006307 Jy/beam ! Clean residual mean=-0.000000 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0547123 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0547123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063782Jy sigma=1.386089 ! Fit after self-cal, rms=0.062864Jy sigma=1.365709 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814754 Jy ! Component: 100 - total flux cleaned = 0.0129316 Jy ! Total flux subtracted in 100 components = 0.0129316 Jy ! Clean residual min=-0.002862 max=0.005618 Jy/beam ! Clean residual mean=0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0676439 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0676439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061463Jy sigma=1.325905 ! Fit after self-cal, rms=0.061453Jy sigma=1.325188 ! Inverting map ! Added new window around map position (-3, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538775 Jy ! Component: 100 - total flux cleaned = 0.00874549 Jy ! Total flux subtracted in 100 components = 0.00874549 Jy ! Clean residual min=-0.002757 max=0.003523 Jy/beam ! Clean residual mean=0.000000 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0763894 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0763894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060770Jy sigma=1.306950 ! Fit after self-cal, rms=0.060712Jy sigma=1.305471 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.272 mas, bpa=63.81 degrees ! Estimated noise=0.172438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465554 Jy ! Component: 100 - total flux cleaned = 0.00767976 Jy ! Component: 150 - total flux cleaned = 0.00989279 Jy ! Component: 200 - total flux cleaned = 0.0115536 Jy ! Total flux subtracted in 200 components = 0.0115536 Jy ! Clean residual min=-0.002475 max=0.004055 Jy/beam ! Clean residual mean=0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.087943 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.087943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060293Jy sigma=1.294238 ! Fit after self-cal, rms=0.060254Jy sigma=1.292978 ! Inverting map ! Added new window around map position (-1.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035096 Jy ! Component: 100 - total flux cleaned = 0.00544824 Jy ! Component: 150 - total flux cleaned = 0.00691764 Jy ! Component: 200 - total flux cleaned = 0.00808377 Jy ! Total flux subtracted in 200 components = 0.00808377 Jy ! Clean residual min=-0.002004 max=0.002867 Jy/beam ! Clean residual mean=0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0960268 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.0960268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060037Jy sigma=1.286863 ! Fit after self-cal, rms=0.060003Jy sigma=1.286134 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 1.272 at 63.81 degrees (North through East) ! Clean map min=-0.0018506 max=0.058249 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.02 HN 0.87 KP 1.03 ! LA 0.93 MK 1.11 NL 1.16 OV 0.89 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.06 HN 0.91 KP 1.02 ! LA 0.96 MK 1.05 NL 1.17 OV 0.91 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 0.90 KP 1.02 ! LA 0.94 MK 1.13 NL 1.19 OV 0.90 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 HN 0.92 KP 1.04 ! LA 0.90 MK 1.15 NL 1.16 OV 0.91 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 0.86 KP 1.05 ! LA 0.91 MK 1.03 NL 1.20 OV 0.95 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.90 KP 1.01 ! LA 0.93 MK 1.07 NL 1.17 OV 0.96 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.16 HN 0.89 KP 1.04 ! LA 0.93 MK 0.99 NL 1.20 OV 0.88 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.85 KP 1.06 ! LA 0.92 MK 1.07 NL 1.18 OV 0.95 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.93 KP 1.07 ! LA 0.96 MK 1.11 NL 1.17 OV 0.87 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.89 KP 1.06 ! LA 0.92 MK 1.05 NL 1.17 OV 0.89 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.92 KP 1.03 ! LA 0.94 MK 0.98 NL 1.18 OV 0.92 ! PT 0.89 SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.05 HN 0.86 KP 1.03 ! LA 0.91 MK 1.00 NL 1.17 OV 0.95 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.060003Jy sigma=1.286134 ! Fit after self-cal, rms=0.058872Jy sigma=1.271182 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.062 mas, bmaj=1.268 mas, bpa=62.63 degrees ! Estimated noise=0.172975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230875 Jy ! Component: 100 - total flux cleaned = 0.00379784 Jy ! Component: 150 - total flux cleaned = 0.00476847 Jy ! Component: 200 - total flux cleaned = 0.0054546 Jy ! Total flux subtracted in 200 components = 0.0054546 Jy ! Clean residual min=-0.001321 max=0.001509 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.101481 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.101481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058770Jy sigma=1.268105 ! Fit after self-cal, rms=0.058849Jy sigma=1.267110 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058849Jy sigma=1.267110 ! Fit after self-cal, rms=0.059954Jy sigma=1.259772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.063 mas, bmaj=1.27 mas, bpa=62.46 degrees ! Estimated noise=0.173274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073711 Jy ! Component: 100 - total flux cleaned = 0.00113835 Jy ! Component: 150 - total flux cleaned = 0.0014949 Jy ! Component: 200 - total flux cleaned = 0.00160591 Jy ! Total flux subtracted in 200 components = 0.00160591 Jy ! Clean residual min=-0.000910 max=0.001282 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.103087 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.103087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059929Jy sigma=1.259099 ! Fit after self-cal, rms=0.059976Jy sigma=1.258735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973255 Jy ! Component: 100 - total flux cleaned = 0.00121176 Jy ! Component: 150 - total flux cleaned = 0.0013553 Jy ! Component: 200 - total flux cleaned = 0.00150376 Jy ! Total flux subtracted in 200 components = 0.00150376 Jy ! Clean residual min=-0.000890 max=0.001096 Jy/beam ! Clean residual mean=0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.104591 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.104591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059950Jy sigma=1.258118 ! Fit after self-cal, rms=0.059950Jy sigma=1.258056 ! Inverting map ! Added new window around map position (-2.8, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103945 Jy ! Component: 100 - total flux cleaned = 0.00159635 Jy ! Component: 150 - total flux cleaned = 0.00188798 Jy ! Component: 200 - total flux cleaned = 0.00199906 Jy ! Total flux subtracted in 200 components = 0.00199906 Jy ! Clean residual min=-0.000870 max=0.000957 Jy/beam ! Clean residual mean=0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.10659 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.10659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059927Jy sigma=1.257474 ! Fit after self-cal, rms=0.059926Jy sigma=1.257435 ! Inverting map ! Added new window around map position (-33.6, -17.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512448 Jy ! Component: 100 - total flux cleaned = 0.000699108 Jy ! Component: 150 - total flux cleaned = 0.000808522 Jy ! Component: 200 - total flux cleaned = 0.000891964 Jy ! Total flux subtracted in 200 components = 0.000891964 Jy ! Clean residual min=-0.000862 max=0.000902 Jy/beam ! Clean residual mean=0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.107482 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.107482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059908Jy sigma=1.257087 ! Fit after self-cal, rms=0.059907Jy sigma=1.257052 ! Inverting map ! Added new window around map position (39.4, 33.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593084 Jy ! Component: 100 - total flux cleaned = 0.00068819 Jy ! Component: 150 - total flux cleaned = 0.000825517 Jy ! Component: 200 - total flux cleaned = 0.000890066 Jy ! Total flux subtracted in 200 components = 0.000890066 Jy ! Clean residual min=-0.000839 max=0.000881 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.108372 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 162 components and 0.108372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059893Jy sigma=1.256702 ! Fit after self-cal, rms=0.059892Jy sigma=1.256675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059892Jy sigma=1.256675 ! Fit after self-cal, rms=0.059747Jy sigma=1.256488 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.27 mas, bpa=62.28 degrees ! Estimated noise=0.172901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272135 Jy ! Component: 100 - total flux cleaned = 0.000396901 Jy ! Component: 150 - total flux cleaned = 0.000495762 Jy ! Component: 200 - total flux cleaned = 0.000604413 Jy ! Total flux subtracted in 200 components = 0.000604413 Jy ! Clean residual min=-0.000803 max=0.000884 Jy/beam ! Clean residual mean=0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.108977 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 169 components and 0.108976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059738Jy sigma=1.256274 ! Fit after self-cal, rms=0.059738Jy sigma=1.256260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -46.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774151 Jy ! Component: 100 - total flux cleaned = 0.00117348 Jy ! Component: 150 - total flux cleaned = 0.00143792 Jy ! Component: 200 - total flux cleaned = 0.00162872 Jy ! Total flux subtracted in 200 components = 0.00162872 Jy ! Clean residual min=-0.000839 max=0.000780 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.110605 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 180 components and 0.110605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059725Jy sigma=1.255948 ! Fit after self-cal, rms=0.059725Jy sigma=1.255927 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059725Jy sigma=1.255927 ! Fit after self-cal, rms=0.059574Jy sigma=1.255898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=2.507 mas, bpa=72.65 degrees ! Estimated noise=0.218124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597581 Jy ! Component: 100 - total flux cleaned = 0.00105203 Jy ! Component: 150 - total flux cleaned = 0.00127899 Jy ! Component: 200 - total flux cleaned = 0.00138556 Jy ! Total flux subtracted in 200 components = 0.00138556 Jy ! Clean residual min=-0.000822 max=0.000836 Jy/beam ! Clean residual mean=0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.111991 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 202 components and 0.111991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059571Jy sigma=1.255791 ! Fit after self-cal, rms=0.059569Jy sigma=1.255781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167878 Jy ! Component: 100 - total flux cleaned = 0.000265727 Jy ! Component: 150 - total flux cleaned = 0.000344428 Jy ! Component: 200 - total flux cleaned = 0.000417671 Jy ! Total flux subtracted in 200 components = 0.000417671 Jy ! Clean residual min=-0.000810 max=0.000830 Jy/beam ! Clean residual mean=0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.112408 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 212 components and 0.112408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059567Jy sigma=1.255724 ! Fit after self-cal, rms=0.059566Jy sigma=1.255721 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.269 mas, bpa=62.28 degrees ! Estimated noise=0.172614 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 1.269 at 62.28 degrees (North through East) ! Clean map min=-0.00072036 max=0.058132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7978 mas, bmaj=1.026 mas, bpa=58.4 degrees ! Estimated noise=0.341331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414362 Jy ! Component: 100 - total flux cleaned = 0.0557516 Jy ! Component: 150 - total flux cleaned = 0.0645393 Jy ! Component: 200 - total flux cleaned = 0.0707163 Jy ! Total flux subtracted in 200 components = 0.0707163 Jy ! Clean residual min=-0.002461 max=0.003619 Jy/beam ! Clean residual mean=0.000001 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0707163 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0707163 Jy ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.269 mas, bpa=62.28 degrees ! Estimated noise=0.172614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692381 Jy ! Component: 100 - total flux cleaned = 0.0116461 Jy ! Component: 150 - total flux cleaned = 0.015352 Jy ! Component: 200 - total flux cleaned = 0.0183421 Jy ! Total flux subtracted in 200 components = 0.0183421 Jy ! Clean residual min=-0.001302 max=0.001947 Jy/beam ! Clean residual mean=0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0890584 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 67 components and 0.0890584 Jy ! Inverting map ! Added new window around map position (1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024805 Jy ! Component: 100 - total flux cleaned = 0.00453996 Jy ! Component: 150 - total flux cleaned = 0.0063246 Jy ! Component: 200 - total flux cleaned = 0.00789829 Jy ! Total flux subtracted in 200 components = 0.00789829 Jy ! Clean residual min=-0.001077 max=0.001229 Jy/beam ! Clean residual mean=0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0969567 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 99 components and 0.0969567 Jy ! Inverting map ! Added new window around map position (-3.8, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146332 Jy ! Component: 100 - total flux cleaned = 0.00275742 Jy ! Component: 150 - total flux cleaned = 0.00393889 Jy ! Component: 200 - total flux cleaned = 0.00502212 Jy ! Total flux subtracted in 200 components = 0.00502212 Jy ! Clean residual min=-0.000981 max=0.001034 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.101979 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 124 components and 0.101979 Jy ! Inverting map ! Added new window around map position (-9.2, 20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961573 Jy ! Component: 100 - total flux cleaned = 0.00177743 Jy ! Component: 150 - total flux cleaned = 0.00256514 Jy ! Component: 200 - total flux cleaned = 0.00320149 Jy ! Total flux subtracted in 200 components = 0.00320149 Jy ! Clean residual min=-0.000888 max=0.000882 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.10518 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 148 components and 0.10518 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=2.507 mas, bpa=72.65 degrees ! Estimated noise=0.218124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133126 Jy ! Component: 100 - total flux cleaned = 0.00234737 Jy ! Component: 150 - total flux cleaned = 0.0031728 Jy ! Component: 200 - total flux cleaned = 0.00387483 Jy ! Total flux subtracted in 200 components = 0.00387483 Jy ! Clean residual min=-0.000939 max=0.000964 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.109055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613312 Jy ! Component: 100 - total flux cleaned = 0.00115517 Jy ! Component: 150 - total flux cleaned = 0.00148629 Jy ! Component: 200 - total flux cleaned = 0.00177247 Jy ! Total flux subtracted in 200 components = 0.00177247 Jy ! Clean residual min=-0.000856 max=0.000854 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.110828 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 224 components and 0.110828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.269 mas, bpa=62.28 degrees ! Estimated noise=0.172614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77087e-05 Jy ! Component: 100 - total flux cleaned = 7.82201e-05 Jy ! Component: 150 - total flux cleaned = 0.000178764 Jy ! Component: 200 - total flux cleaned = 0.00027438 Jy ! Total flux subtracted in 200 components = 0.00027438 Jy ! Clean residual min=-0.000825 max=0.000772 Jy/beam ! Clean residual mean=0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.111102 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 243 components and 0.111102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059576Jy sigma=1.255918 ! Fit after self-cal, rms=0.059564Jy sigma=1.255821 wmodel J1124+6555_X_map.mod ! Writing 243 model components to file: J1124+6555_X_map.mod wobs J1124+6555_X_uvs.fits ! Writing UV FITS file: J1124+6555_X_uvs.fits wwins J1124+6555_X_map.win ! wwins: Wrote 12 windows to J1124+6555_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.56726e-05 Jy ! Component: 100 - total flux cleaned = -0.000121493 Jy ! Component: 150 - total flux cleaned = -5.45769e-05 Jy ! Component: 200 - total flux cleaned = 2.32398e-05 Jy ! Component: 250 - total flux cleaned = 8.66133e-05 Jy ! Component: 300 - total flux cleaned = 0.00012383 Jy ! Component: 350 - total flux cleaned = 0.000184794 Jy ! Component: 400 - total flux cleaned = 0.000220805 Jy ! Component: 450 - total flux cleaned = 0.000268317 Jy ! Component: 500 - total flux cleaned = 0.000338664 Jy ! Component: 550 - total flux cleaned = 0.000419506 Jy ! Component: 600 - total flux cleaned = 0.000465053 Jy ! Component: 650 - total flux cleaned = 0.000532315 Jy ! Component: 700 - total flux cleaned = 0.000554267 Jy ! Component: 750 - total flux cleaned = 0.00052123 Jy ! Component: 800 - total flux cleaned = 0.000597861 Jy ! Component: 850 - total flux cleaned = 0.000630216 Jy ! Component: 900 - total flux cleaned = 0.000683699 Jy ! Component: 950 - total flux cleaned = 0.000715372 Jy ! Component: 1000 - total flux cleaned = 0.000736607 Jy ! Component: 1050 - total flux cleaned = 0.000788589 Jy ! Component: 1100 - total flux cleaned = 0.000799006 Jy ! Component: 1150 - total flux cleaned = 0.000809279 Jy ! Component: 1200 - total flux cleaned = 0.000860089 Jy ! Component: 1250 - total flux cleaned = 0.000900376 Jy ! Component: 1300 - total flux cleaned = 0.000890387 Jy ! Component: 1350 - total flux cleaned = 0.000939925 Jy ! Component: 1400 - total flux cleaned = 0.000910619 Jy ! Component: 1450 - total flux cleaned = 0.000949831 Jy ! Component: 1500 - total flux cleaned = 0.000978902 Jy ! Component: 1550 - total flux cleaned = 0.000998091 Jy ! Component: 1600 - total flux cleaned = 0.0010172 Jy ! Component: 1650 - total flux cleaned = 0.00102658 Jy ! Component: 1700 - total flux cleaned = 0.00103585 Jy ! Component: 1750 - total flux cleaned = 0.00102645 Jy ! Component: 1800 - total flux cleaned = 0.000998619 Jy ! Component: 1850 - total flux cleaned = 0.00104491 Jy ! Component: 1900 - total flux cleaned = 0.00100816 Jy ! Component: 1950 - total flux cleaned = 0.0010264 Jy ! Component: 2000 - total flux cleaned = 0.00098085 Jy ! Component: 2050 - total flux cleaned = 0.000971861 Jy ! Component: 2100 - total flux cleaned = 0.000936038 Jy ! Component: 2150 - total flux cleaned = 0.000998525 Jy ! Component: 2200 - total flux cleaned = 0.000936392 Jy ! Component: 2250 - total flux cleaned = 0.000936367 Jy ! Component: 2300 - total flux cleaned = 0.000936431 Jy ! Component: 2350 - total flux cleaned = 0.000901562 Jy ! Component: 2400 - total flux cleaned = 0.000962225 Jy ! Component: 2450 - total flux cleaned = 0.000910415 Jy ! Component: 2500 - total flux cleaned = 0.000884712 Jy ! Component: 2550 - total flux cleaned = 0.000901736 Jy ! Component: 2600 - total flux cleaned = 0.000893208 Jy ! Component: 2650 - total flux cleaned = 0.000842508 Jy ! Component: 2700 - total flux cleaned = 0.00083406 Jy ! Component: 2750 - total flux cleaned = 0.000842464 Jy ! Component: 2800 - total flux cleaned = 0.000817545 Jy ! Component: 2850 - total flux cleaned = 0.000825822 Jy ! Component: 2900 - total flux cleaned = 0.000801137 Jy ! Component: 2950 - total flux cleaned = 0.000825749 Jy ! Component: 3000 - total flux cleaned = 0.000825782 Jy ! Component: 3050 - total flux cleaned = 0.000809581 Jy ! Component: 3100 - total flux cleaned = 0.000793488 Jy ! Component: 3150 - total flux cleaned = 0.000793454 Jy ! Component: 3200 - total flux cleaned = 0.000777423 Jy ! Component: 3250 - total flux cleaned = 0.000769488 Jy ! Component: 3300 - total flux cleaned = 0.000753653 Jy ! Component: 3350 - total flux cleaned = 0.000769378 Jy ! Component: 3400 - total flux cleaned = 0.000722144 Jy ! Component: 3450 - total flux cleaned = 0.000737774 Jy ! Component: 3500 - total flux cleaned = 0.000706653 Jy ! Component: 3550 - total flux cleaned = 0.000683432 Jy ! Component: 3600 - total flux cleaned = 0.000675636 Jy ! Component: 3650 - total flux cleaned = 0.000683327 Jy ! Component: 3700 - total flux cleaned = 0.000660258 Jy ! Component: 3750 - total flux cleaned = 0.000614423 Jy ! Component: 3800 - total flux cleaned = 0.00061442 Jy ! Component: 3850 - total flux cleaned = 0.000614455 Jy ! Component: 3900 - total flux cleaned = 0.000576724 Jy ! Component: 3950 - total flux cleaned = 0.000606772 Jy ! Component: 4000 - total flux cleaned = 0.000576799 Jy ! Component: 4050 - total flux cleaned = 0.00052462 Jy ! Total flux subtracted in 4096 components = 0.000487526 Jy ! Clean residual min=-0.000464 max=0.000472 Jy/beam ! Clean residual mean=0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.11159 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 589 components and 0.11159 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1124+6555_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 1.269 at 62.28 degrees (North through East) ! Clean map min=-0.00057455 max=0.058195 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1124+6555_X_map.fits wmodel /vlbi/uf001/uva//J1124+6555_X_map.mod ! Writing 589 model components to file: /vlbi/uf001/uva//J1124+6555_X_map.mod wobs /vlbi/uf001/uva//J1124+6555_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1124+6555_X_uvs.fits wwins /vlbi/uf001/uva//J1124+6555_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J1124+6555_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0581955 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127559 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.657574 0.657574 1.31515 2.63029 5.26059 10.5212 21.0424 42.0847 84.1694 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 456.222 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1124+6555_X_dfm.log closed on Mon Jan 14 01:17:07 2019