! Started logfile: /vlbi/uf001/uvm//J1114-3652_S_a_dfm.log on Sun Jan 13 21:26:28 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J1114-3652_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1114-3652_S_a_uvm.fits ! AN table 1: 68 integrations on 28 of 28 possible baselines. ! AN table 2: 73 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.88863 visibilities/baseline/integration-bin. ! Found source: J1114-3652 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7995 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1114-3652_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003005Jy sigma=14.481240 ! Fit after self-cal, rms=0.938427Jy sigma=13.542095 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.615 mas, bpa=-8.671 degrees ! Estimated noise=0.921655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049364 Jy ! Component: 100 - total flux cleaned = 0.0614877 Jy ! Total flux subtracted in 100 components = 0.0614877 Jy ! Clean residual min=-0.003782 max=0.004820 Jy/beam ! Clean residual mean=-0.000013 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0614877 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0614877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087189Jy sigma=1.205592 ! Fit after self-cal, rms=0.086181Jy sigma=1.190614 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607559 Jy ! Component: 100 - total flux cleaned = 0.00897879 Jy ! Total flux subtracted in 100 components = 0.00897879 Jy ! Clean residual min=-0.003344 max=0.003192 Jy/beam ! Clean residual mean=-0.000000 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0704665 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0704665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085764Jy sigma=1.183253 ! Fit after self-cal, rms=0.085735Jy sigma=1.183004 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=8.31 mas, bpa=-9.458 degrees ! Estimated noise=0.568716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230791 Jy ! Component: 100 - total flux cleaned = 0.00326903 Jy ! Component: 150 - total flux cleaned = 0.00336428 Jy ! Component: 200 - total flux cleaned = 0.00346886 Jy ! Total flux subtracted in 200 components = 0.00346886 Jy ! Clean residual min=-0.002745 max=0.002716 Jy/beam ! Clean residual mean=0.000008 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0739353 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0739354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085690Jy sigma=1.181998 ! Fit after self-cal, rms=0.085683Jy sigma=1.181906 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 8.31 at -9.458 degrees (North through East) ! Clean map min=-0.002746 max=0.065816 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 KP 0.97 LA 0.95 MK 0.98 ! NL 1.21 OV 0.99 PT 1.06 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 KP 1.02 LA 0.94 MK 0.99 ! NL 1.09 OV 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.88 KP 1.00 LA 0.99 MK 0.96 ! NL 1.09 OV 0.80 PT 1.09 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 KP 1.02 LA 1.01 MK 1.11 ! NL 0.90 OV 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.01 LA 1.05 MK 0.98 ! NL 1.12 OV 0.99 PT 1.05 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 1.04 LA 0.97 MK 1.15 ! NL 0.96 OV 1.07 ! ! ! Fit before self-cal, rms=0.085683Jy sigma=1.181906 ! Fit after self-cal, rms=0.087499Jy sigma=1.177042 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=8.361 mas, bpa=-9.395 degrees ! Estimated noise=0.568565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353797 Jy ! Component: 100 - total flux cleaned = -0.000335272 Jy ! Component: 150 - total flux cleaned = -0.000285261 Jy ! Component: 200 - total flux cleaned = -0.000270065 Jy ! Total flux subtracted in 200 components = -0.000270065 Jy ! Clean residual min=-0.002225 max=0.002786 Jy/beam ! Clean residual mean=-0.000005 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0736653 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.0736653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087488Jy sigma=1.176889 ! Fit after self-cal, rms=0.087704Jy sigma=1.176099 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087704Jy sigma=1.176099 ! Fit after self-cal, rms=0.089007Jy sigma=1.174618 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.373 mas, bpa=-9.578 degrees ! Estimated noise=0.57017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.97437e-05 Jy ! Component: 100 - total flux cleaned = 1.47234e-05 Jy ! Component: 150 - total flux cleaned = 1.4644e-05 Jy ! Component: 200 - total flux cleaned = 2.65398e-05 Jy ! Total flux subtracted in 200 components = 2.65398e-05 Jy ! Clean residual min=-0.002237 max=0.002647 Jy/beam ! Clean residual mean=-0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0736918 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0736918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089002Jy sigma=1.174551 ! Fit after self-cal, rms=0.089080Jy sigma=1.174394 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-57, -55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147589 Jy ! Component: 100 - total flux cleaned = 0.00148378 Jy ! Component: 150 - total flux cleaned = 0.0013871 Jy ! Component: 200 - total flux cleaned = 0.00138763 Jy ! Total flux subtracted in 200 components = 0.00138763 Jy ! Clean residual min=-0.002082 max=0.002216 Jy/beam ! Clean residual mean=-0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0750795 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.0750795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089013Jy sigma=1.173544 ! Fit after self-cal, rms=0.088985Jy sigma=1.173148 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088985Jy sigma=1.173148 ! Fit after self-cal, rms=0.089460Jy sigma=1.172780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=8.381 mas, bpa=-9.74 degrees ! Estimated noise=0.56782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860138 Jy ! Component: 100 - total flux cleaned = 0.000805589 Jy ! Component: 150 - total flux cleaned = 0.000779633 Jy ! Component: 200 - total flux cleaned = 0.000756813 Jy ! Total flux subtracted in 200 components = 0.000756813 Jy ! Clean residual min=-0.002058 max=0.002223 Jy/beam ! Clean residual mean=-0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0758363 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.0758363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089433Jy sigma=1.172480 ! Fit after self-cal, rms=0.089472Jy sigma=1.172320 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273456 Jy ! Component: 100 - total flux cleaned = 0.000230083 Jy ! Component: 150 - total flux cleaned = 0.00023056 Jy ! Component: 200 - total flux cleaned = 0.000230466 Jy ! Total flux subtracted in 200 components = 0.000230466 Jy ! Clean residual min=-0.002094 max=0.002214 Jy/beam ! Clean residual mean=0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0760668 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0760668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089459Jy sigma=1.172188 ! Fit after self-cal, rms=0.089453Jy sigma=1.172172 ! Inverting map ! Added new window around map position (83.5, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183617 Jy ! Component: 100 - total flux cleaned = 0.00204889 Jy ! Component: 150 - total flux cleaned = 0.00213345 Jy ! Component: 200 - total flux cleaned = 0.00218489 Jy ! Total flux subtracted in 200 components = 0.00218489 Jy ! Clean residual min=-0.002041 max=0.002067 Jy/beam ! Clean residual mean=-0.000008 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0782516 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.0782516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089410Jy sigma=1.171567 ! Fit after self-cal, rms=0.089374Jy sigma=1.171384 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089374Jy sigma=1.171384 ! Fit after self-cal, rms=0.089389Jy sigma=1.171300 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.592 mas, bmaj=26.75 mas, bpa=-6.396 degrees ! Estimated noise=0.719548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870099 Jy ! Component: 100 - total flux cleaned = 0.00120888 Jy ! Component: 150 - total flux cleaned = 0.00128425 Jy ! Component: 200 - total flux cleaned = 0.00133652 Jy ! Total flux subtracted in 200 components = 0.00133652 Jy ! Clean residual min=-0.001937 max=0.001965 Jy/beam ! Clean residual mean=-0.000015 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0795882 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.0795882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089382Jy sigma=1.171225 ! Fit after self-cal, rms=0.089394Jy sigma=1.171150 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405035 Jy ! Component: 100 - total flux cleaned = 0.000514123 Jy ! Component: 150 - total flux cleaned = 0.000562335 Jy ! Component: 200 - total flux cleaned = 0.000595959 Jy ! Total flux subtracted in 200 components = 0.000595959 Jy ! Clean residual min=-0.001904 max=0.002003 Jy/beam ! Clean residual mean=-0.000016 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0801841 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.0801841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089392Jy sigma=1.171125 ! Fit after self-cal, rms=0.089390Jy sigma=1.171109 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.378 mas, bpa=-9.807 degrees ! Estimated noise=0.566221 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.106 x 8.378 at -9.807 degrees (North through East) ! Clean map min=-0.0027157 max=0.065604 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=6.617 mas, bpa=-8.759 degrees ! Estimated noise=0.92799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499771 Jy ! Component: 100 - total flux cleaned = 0.0630017 Jy ! Component: 150 - total flux cleaned = 0.0693305 Jy ! Component: 200 - total flux cleaned = 0.072877 Jy ! Total flux subtracted in 200 components = 0.072877 Jy ! Clean residual min=-0.003391 max=0.003097 Jy/beam ! Clean residual mean=-0.000008 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.072877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.072877 Jy ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.378 mas, bpa=-9.807 degrees ! Estimated noise=0.566221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311738 Jy ! Component: 100 - total flux cleaned = 0.0043926 Jy ! Component: 150 - total flux cleaned = 0.00533411 Jy ! Component: 200 - total flux cleaned = 0.00619466 Jy ! Total flux subtracted in 200 components = 0.00619466 Jy ! Clean residual min=-0.002118 max=0.002153 Jy/beam ! Clean residual mean=-0.000011 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0790716 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.0790716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.592 mas, bmaj=26.75 mas, bpa=-6.396 degrees ! Estimated noise=0.719548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092244 Jy ! Component: 100 - total flux cleaned = 0.0010637 Jy ! Component: 150 - total flux cleaned = 0.0011335 Jy ! Component: 200 - total flux cleaned = 0.00113355 Jy ! Total flux subtracted in 200 components = 0.00113355 Jy ! Clean residual min=-0.001937 max=0.002030 Jy/beam ! Clean residual mean=-0.000017 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0802052 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82783e-05 Jy ! Component: 100 - total flux cleaned = 3.4604e-05 Jy ! Component: 150 - total flux cleaned = 1.99859e-05 Jy ! Component: 200 - total flux cleaned = 6.71924e-06 Jy ! Total flux subtracted in 200 components = 6.71924e-06 Jy ! Clean residual min=-0.001936 max=0.002022 Jy/beam ! Clean residual mean=-0.000016 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0802119 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.0802119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.378 mas, bpa=-9.807 degrees ! Estimated noise=0.566221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336856 Jy ! Component: 100 - total flux cleaned = -0.000338589 Jy ! Component: 150 - total flux cleaned = -0.0004074 Jy ! Component: 200 - total flux cleaned = -0.000375176 Jy ! Total flux subtracted in 200 components = -0.000375176 Jy ! Clean residual min=-0.002187 max=0.002135 Jy/beam ! Clean residual mean=-0.000010 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0798367 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.0798367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089411Jy sigma=1.171394 ! Fit after self-cal, rms=0.089414Jy sigma=1.171300 wmodel J1114-3652_S_a_map.mod ! Writing 62 model components to file: J1114-3652_S_a_map.mod wobs J1114-3652_S_a_uvs.fits ! Writing UV FITS file: J1114-3652_S_a_uvs.fits wwins J1114-3652_S_a_map.win ! wwins: Wrote 3 windows to J1114-3652_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.43513e-05 Jy ! Component: 100 - total flux cleaned = -8.98535e-05 Jy ! Component: 150 - total flux cleaned = -0.000249042 Jy ! Component: 200 - total flux cleaned = -0.000157421 Jy ! Component: 250 - total flux cleaned = -0.000187182 Jy ! Component: 300 - total flux cleaned = -0.000329789 Jy ! Component: 350 - total flux cleaned = -0.00041364 Jy ! Component: 400 - total flux cleaned = -0.000576929 Jy ! Component: 450 - total flux cleaned = -0.000762404 Jy ! Component: 500 - total flux cleaned = -0.000943708 Jy ! Component: 550 - total flux cleaned = -0.00106998 Jy ! Component: 600 - total flux cleaned = -0.00116938 Jy ! Component: 650 - total flux cleaned = -0.00136397 Jy ! Component: 700 - total flux cleaned = -0.00148335 Jy ! Component: 750 - total flux cleaned = -0.00167029 Jy ! Component: 800 - total flux cleaned = -0.00187616 Jy ! Component: 850 - total flux cleaned = -0.00201089 Jy ! Component: 900 - total flux cleaned = -0.00207674 Jy ! Component: 950 - total flux cleaned = -0.00216361 Jy ! Component: 1000 - total flux cleaned = -0.00227051 Jy ! Component: 1050 - total flux cleaned = -0.00233368 Jy ! Component: 1100 - total flux cleaned = -0.00241687 Jy ! Component: 1150 - total flux cleaned = -0.00253892 Jy ! Component: 1200 - total flux cleaned = -0.00253851 Jy ! Component: 1250 - total flux cleaned = -0.00263756 Jy ! Component: 1300 - total flux cleaned = -0.00261829 Jy ! Component: 1350 - total flux cleaned = -0.00273418 Jy ! Component: 1400 - total flux cleaned = -0.00275309 Jy ! Component: 1450 - total flux cleaned = -0.00279095 Jy ! Component: 1500 - total flux cleaned = -0.00279113 Jy ! Component: 1550 - total flux cleaned = -0.00284632 Jy ! Component: 1600 - total flux cleaned = -0.00290089 Jy ! Component: 1650 - total flux cleaned = -0.00293664 Jy ! Component: 1700 - total flux cleaned = -0.00297202 Jy ! Component: 1750 - total flux cleaned = -0.00300714 Jy ! Component: 1800 - total flux cleaned = -0.00302453 Jy ! Component: 1850 - total flux cleaned = -0.00305866 Jy ! Component: 1900 - total flux cleaned = -0.0030585 Jy ! Component: 1950 - total flux cleaned = -0.00309187 Jy ! Component: 2000 - total flux cleaned = -0.00305875 Jy ! Component: 2050 - total flux cleaned = -0.00305888 Jy ! Component: 2100 - total flux cleaned = -0.00309115 Jy ! Component: 2150 - total flux cleaned = -0.00307522 Jy ! Component: 2200 - total flux cleaned = -0.00310706 Jy ! Component: 2250 - total flux cleaned = -0.00307567 Jy ! Component: 2300 - total flux cleaned = -0.00312214 Jy ! Component: 2350 - total flux cleaned = -0.0030913 Jy ! Component: 2400 - total flux cleaned = -0.00310672 Jy ! Component: 2450 - total flux cleaned = -0.00307653 Jy ! Component: 2500 - total flux cleaned = -0.00306153 Jy ! Component: 2550 - total flux cleaned = -0.00304667 Jy ! Component: 2600 - total flux cleaned = -0.00303206 Jy ! Component: 2650 - total flux cleaned = -0.00298845 Jy ! Component: 2700 - total flux cleaned = -0.0029597 Jy ! Component: 2750 - total flux cleaned = -0.00291689 Jy ! Component: 2800 - total flux cleaned = -0.00288861 Jy ! Component: 2850 - total flux cleaned = -0.00286042 Jy ! Component: 2900 - total flux cleaned = -0.00286046 Jy ! Component: 2950 - total flux cleaned = -0.00277742 Jy ! Component: 3000 - total flux cleaned = -0.00275004 Jy ! Component: 3050 - total flux cleaned = -0.00272311 Jy ! Component: 3100 - total flux cleaned = -0.00266924 Jy ! Component: 3150 - total flux cleaned = -0.00266935 Jy ! Component: 3200 - total flux cleaned = -0.00261603 Jy ! Component: 3250 - total flux cleaned = -0.00257652 Jy ! Component: 3300 - total flux cleaned = -0.00252424 Jy ! Component: 3350 - total flux cleaned = -0.00245927 Jy ! Component: 3400 - total flux cleaned = -0.00240781 Jy ! Component: 3450 - total flux cleaned = -0.00242063 Jy ! Component: 3500 - total flux cleaned = -0.00238252 Jy ! Component: 3550 - total flux cleaned = -0.0023321 Jy ! Component: 3600 - total flux cleaned = -0.00228198 Jy ! Component: 3650 - total flux cleaned = -0.00228208 Jy ! Component: 3700 - total flux cleaned = -0.0022944 Jy ! Component: 3750 - total flux cleaned = -0.0022452 Jy ! Component: 3800 - total flux cleaned = -0.00220857 Jy ! Component: 3850 - total flux cleaned = -0.00219653 Jy ! Component: 3900 - total flux cleaned = -0.00218448 Jy ! Component: 3950 - total flux cleaned = -0.00218448 Jy ! Component: 4000 - total flux cleaned = -0.0021963 Jy ! Component: 4050 - total flux cleaned = -0.00214875 Jy ! Total flux subtracted in 4096 components = -0.00214877 Jy ! Clean residual min=-0.000874 max=0.000672 Jy/beam ! Clean residual mean=-0.000006 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.077688 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 309 components and 0.077688 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1114-3652_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.106 x 8.378 at -9.807 degrees (North through East) ! Clean map min=-0.0025108 max=0.065353 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1114-3652_S_a_map.fits wmodel /vlbi/uf001/uvm//J1114-3652_S_a_map.mod ! Writing 309 model components to file: /vlbi/uf001/uvm//J1114-3652_S_a_map.mod wobs /vlbi/uf001/uvm//J1114-3652_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1114-3652_S_a_uvs.fits wwins /vlbi/uf001/uvm//J1114-3652_S_a_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J1114-3652_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0653528 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205352 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.942664 0.942664 1.88533 3.77066 7.54131 15.0826 30.1652 60.3305 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 318.247 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1114-3652_S_a_dfm.log closed on Sun Jan 13 21:26:33 2019