! Started logfile: /vlbi/uf001/uva//J1106+2812_X_dfm.log on Mon Jan 14 01:08:10 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1106+2812_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1106+2812_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97076 visibilities/baseline/integration-bin.
! Found source: J1106+2812
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1106+2812_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013557Jy  sigma=25.237494
! Fit after  self-cal, rms=0.843207Jy  sigma=20.974422
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7168 mas, bmaj=1.485 mas, bpa=-5.012 degrees
! Estimated noise=0.310343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121745 Jy
! Component: 100  -  total flux cleaned = 0.15193 Jy
! Total flux subtracted in 100 components = 0.15193 Jy
! Clean residual min=-0.006315 max=0.011666 Jy/beam
! Clean residual mean=-0.000002 rms=0.001349 Jy/beam
! Combined flux in latest and established models = 0.15193 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.15193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067556Jy  sigma=1.573323
! Fit after  self-cal, rms=0.067550Jy  sigma=1.572949
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115409 Jy
! Component: 100  -  total flux cleaned = 0.0139313 Jy
! Total flux subtracted in 100 components = 0.0139313 Jy
! Clean residual min=-0.006074 max=0.007839 Jy/beam
! Clean residual mean=-0.000004 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.165861 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.165861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066066Jy  sigma=1.532217
! Fit after  self-cal, rms=0.066064Jy  sigma=1.531990
! Inverting map 
! Added new window around map position (-6.4, -4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589101 Jy
! Component: 100  -  total flux cleaned = 0.00577644 Jy
! Total flux subtracted in 100 components = 0.00577644 Jy
! Clean residual min=-0.005443 max=0.006987 Jy/beam
! Clean residual mean=-0.000003 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.171638 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.171638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065576Jy  sigma=1.519361
! Fit after  self-cal, rms=0.065515Jy  sigma=1.517718
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9026 mas, bmaj=1.778 mas, bpa=-2.109 degrees
! Estimated noise=0.172928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.2, -20.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563538 Jy
! Component: 100  -  total flux cleaned = 0.00808726 Jy
! Component: 150  -  total flux cleaned = 0.00917031 Jy
! Component: 200  -  total flux cleaned = 0.00982847 Jy
! Total flux subtracted in 200 components = 0.00982847 Jy
! Clean residual min=-0.005178 max=0.005590 Jy/beam
! Clean residual mean=-0.000003 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.181466 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.181466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064986Jy  sigma=1.502370
! Fit after  self-cal, rms=0.064944Jy  sigma=1.501101
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9026 x 1.778 at -2.109 degrees (North through East)
! Clean map  min=-0.0052452  max=0.15783 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     HN        0.87     KP        1.00     
!   LA        1.01     MK        1.08     NL        1.14     OV        0.90     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        0.87     KP        1.01     
!   LA        1.00     MK        1.07     NL        1.13     OV        0.90     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        0.88     KP        0.99     
!   LA        0.99     MK        1.08     NL        1.14     OV        0.91     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.99     HN        0.88     KP        1.00     
!   LA        1.01     MK        1.09     NL        1.12     OV        0.90     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.85     KP        1.01     
!   LA        1.04     MK        1.10     NL        1.11     OV        0.91     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.99     HN        0.91     KP        0.99     
!   LA        1.02     MK        1.04     NL        1.13     OV        0.90     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        0.89     KP        1.02     
!   LA        1.03     MK        1.05     NL        1.11     OV        0.89     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     HN        0.92     KP        0.98     
!   LA        1.02     MK        1.07     NL        1.13     OV        0.91     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        0.88     KP        1.02     
!   LA        1.01     MK        1.09     NL        1.12     OV        0.90     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        0.87     KP        1.01     
!   LA        1.05     MK        1.05     NL        1.10     OV        0.91     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.00     HN        0.87     KP        0.98     
!   LA        1.03     MK        1.07     NL        1.12     OV        0.90     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.90     KP        1.01     
!   LA        1.04     MK        1.08     NL        1.14     OV        0.88     
!   PT        0.98     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.064944Jy  sigma=1.501101
! Fit after  self-cal, rms=0.063038Jy  sigma=1.438766
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9007 mas, bmaj=1.782 mas, bpa=-1.405 degrees
! Estimated noise=0.172747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625976 Jy
! Component: 100  -  total flux cleaned = -0.00106141 Jy
! Component: 150  -  total flux cleaned = -0.00160856 Jy
! Component: 200  -  total flux cleaned = -0.00207969 Jy
! Total flux subtracted in 200 components = -0.00207969 Jy
! Clean residual min=-0.003621 max=0.003235 Jy/beam
! Clean residual mean=-0.000003 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.179387 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.179387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062947Jy  sigma=1.436593
! Fit after  self-cal, rms=0.062979Jy  sigma=1.435871
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062979Jy  sigma=1.435871
! Fit after  self-cal, rms=0.062660Jy  sigma=1.398292
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=1.78 mas, bpa=-1.521 degrees
! Estimated noise=0.173339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017245 Jy
! Component: 100  -  total flux cleaned = -0.00268469 Jy
! Component: 150  -  total flux cleaned = -0.00344866 Jy
! Component: 200  -  total flux cleaned = -0.00411927 Jy
! Total flux subtracted in 200 components = -0.00411927 Jy
! Clean residual min=-0.001712 max=0.002256 Jy/beam
! Clean residual mean=-0.000000 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.175267 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.175267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062499Jy  sigma=1.393828
! Fit after  self-cal, rms=0.062519Jy  sigma=1.393156
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123401 Jy
! Component: 100  -  total flux cleaned = 0.0011533 Jy
! Component: 150  -  total flux cleaned = 0.000850594 Jy
! Component: 200  -  total flux cleaned = 0.000582367 Jy
! Total flux subtracted in 200 components = 0.000582367 Jy
! Clean residual min=-0.001548 max=0.001529 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.17585 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 75 components and 0.17585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062451Jy  sigma=1.391282
! Fit after  self-cal, rms=0.062449Jy  sigma=1.391200
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062449Jy  sigma=1.391200
! Fit after  self-cal, rms=0.062501Jy  sigma=1.390137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8933 mas, bmaj=1.777 mas, bpa=-1.57 degrees
! Estimated noise=0.173263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246701 Jy
! Component: 100  -  total flux cleaned = -0.000531926 Jy
! Component: 150  -  total flux cleaned = -0.000761813 Jy
! Component: 200  -  total flux cleaned = -0.00104677 Jy
! Total flux subtracted in 200 components = -0.00104677 Jy
! Clean residual min=-0.001362 max=0.001443 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.174803 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 81 components and 0.174803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062455Jy  sigma=1.388884
! Fit after  self-cal, rms=0.062455Jy  sigma=1.388812
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25.6, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000384084 Jy
! Component: 100  -  total flux cleaned = 0.000230919 Jy
! Component: 150  -  total flux cleaned = -2.74794e-05 Jy
! Component: 200  -  total flux cleaned = -0.000226007 Jy
! Total flux subtracted in 200 components = -0.000226007 Jy
! Clean residual min=-0.001261 max=0.001196 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.174577 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 0.174577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062408Jy  sigma=1.387782
! Fit after  self-cal, rms=0.062405Jy  sigma=1.387754
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062405Jy  sigma=1.387754
! Fit after  self-cal, rms=0.062373Jy  sigma=1.387555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.07 mas, bmaj=2.739 mas, bpa=-3.592 degrees
! Estimated noise=0.222788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428122 Jy
! Component: 100  -  total flux cleaned = -0.000906166 Jy
! Component: 150  -  total flux cleaned = -0.00122488 Jy
! Component: 200  -  total flux cleaned = -0.00147856 Jy
! Total flux subtracted in 200 components = -0.00147856 Jy
! Clean residual min=-0.001686 max=0.001442 Jy/beam
! Clean residual mean=-0.000000 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.173098 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 0.173098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062354Jy  sigma=1.387176
! Fit after  self-cal, rms=0.062351Jy  sigma=1.387141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332465 Jy
! Component: 100  -  total flux cleaned = -0.000524087 Jy
! Component: 150  -  total flux cleaned = -0.000677556 Jy
! Component: 200  -  total flux cleaned = -0.000819042 Jy
! Total flux subtracted in 200 components = -0.000819042 Jy
! Clean residual min=-0.001656 max=0.001376 Jy/beam
! Clean residual mean=-0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.172279 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 138 components and 0.172279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062343Jy  sigma=1.387045
! Fit after  self-cal, rms=0.062342Jy  sigma=1.387038
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8918 mas, bmaj=1.775 mas, bpa=-1.61 degrees
! Estimated noise=0.173229 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8918 x 1.775 at -1.61 degrees (North through East)
! Clean map  min=-0.0014113  max=0.15824 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7105 mas, bmaj=1.487 mas, bpa=-4.369 degrees
! Estimated noise=0.308926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12109 Jy
! Component: 100  -  total flux cleaned = 0.151114 Jy
! Component: 150  -  total flux cleaned = 0.162943 Jy
! Component: 200  -  total flux cleaned = 0.168199 Jy
! Total flux subtracted in 200 components = 0.168199 Jy
! Clean residual min=-0.002376 max=0.002565 Jy/beam
! Clean residual mean=0.000002 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.168199 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.168199 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8918 mas, bmaj=1.775 mas, bpa=-1.61 degrees
! Estimated noise=0.173229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295769 Jy
! Component: 100  -  total flux cleaned = 0.00462518 Jy
! Component: 150  -  total flux cleaned = 0.00536476 Jy
! Component: 200  -  total flux cleaned = 0.00541776 Jy
! Total flux subtracted in 200 components = 0.00541776 Jy
! Clean residual min=-0.001352 max=0.001321 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.173617 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.173617 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.07 mas, bmaj=2.739 mas, bpa=-3.592 degrees
! Estimated noise=0.222788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000729241 Jy
! Component: 100  -  total flux cleaned = -0.00101059 Jy
! Component: 150  -  total flux cleaned = -0.00109443 Jy
! Component: 200  -  total flux cleaned = -0.00120557 Jy
! Total flux subtracted in 200 components = -0.00120557 Jy
! Clean residual min=-0.001529 max=0.001394 Jy/beam
! Clean residual mean=-0.000001 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.172412 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010318 Jy
! Component: 100  -  total flux cleaned = -0.000229439 Jy
! Component: 150  -  total flux cleaned = -0.000316918 Jy
! Component: 200  -  total flux cleaned = -0.000398497 Jy
! Total flux subtracted in 200 components = -0.000398497 Jy
! Clean residual min=-0.001531 max=0.001339 Jy/beam
! Clean residual mean=-0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.172013 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 69 components and 0.172013 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8918 mas, bmaj=1.775 mas, bpa=-1.61 degrees
! Estimated noise=0.173229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362215 Jy
! Component: 100  -  total flux cleaned = 0.00029488 Jy
! Component: 150  -  total flux cleaned = 0.000169097 Jy
! Component: 200  -  total flux cleaned = 8.12013e-05 Jy
! Total flux subtracted in 200 components = 8.12013e-05 Jy
! Clean residual min=-0.001232 max=0.001157 Jy/beam
! Clean residual mean=-0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.172094 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.172094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062381Jy  sigma=1.387801
! Fit after  self-cal, rms=0.062371Jy  sigma=1.387618
wmodel J1106+2812_X_map.mod
! Writing 87 model components to file: J1106+2812_X_map.mod
wobs   J1106+2812_X_uvs.fits
! Writing UV FITS file: J1106+2812_X_uvs.fits
wwins  J1106+2812_X_map.win
! wwins: Wrote 5 windows to J1106+2812_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00028369 Jy
! Component: 100  -  total flux cleaned = -0.00043128 Jy
! Component: 150  -  total flux cleaned = -0.0004713 Jy
! Component: 200  -  total flux cleaned = -0.000548929 Jy
! Component: 250  -  total flux cleaned = -0.000567565 Jy
! Component: 300  -  total flux cleaned = -0.000640645 Jy
! Component: 350  -  total flux cleaned = -0.000640798 Jy
! Component: 400  -  total flux cleaned = -0.000676001 Jy
! Component: 450  -  total flux cleaned = -0.000658647 Jy
! Component: 500  -  total flux cleaned = -0.000625013 Jy
! Component: 550  -  total flux cleaned = -0.000591694 Jy
! Component: 600  -  total flux cleaned = -0.000558918 Jy
! Component: 650  -  total flux cleaned = -0.000526544 Jy
! Component: 700  -  total flux cleaned = -0.000463158 Jy
! Component: 750  -  total flux cleaned = -0.00043211 Jy
! Component: 800  -  total flux cleaned = -0.000370229 Jy
! Component: 850  -  total flux cleaned = -0.000385776 Jy
! Component: 900  -  total flux cleaned = -0.000400469 Jy
! Component: 950  -  total flux cleaned = -0.000325382 Jy
! Component: 1000  -  total flux cleaned = -0.00029578 Jy
! Component: 1050  -  total flux cleaned = -0.000252179 Jy
! Component: 1100  -  total flux cleaned = -0.00028115 Jy
! Component: 1150  -  total flux cleaned = -0.000252781 Jy
! Component: 1200  -  total flux cleaned = -0.000252743 Jy
! Component: 1250  -  total flux cleaned = -0.000224896 Jy
! Component: 1300  -  total flux cleaned = -0.000197378 Jy
! Component: 1350  -  total flux cleaned = -0.000183864 Jy
! Component: 1400  -  total flux cleaned = -0.000197405 Jy
! Component: 1450  -  total flux cleaned = -0.000224131 Jy
! Component: 1500  -  total flux cleaned = -0.00013139 Jy
! Component: 1550  -  total flux cleaned = -0.000131473 Jy
! Component: 1600  -  total flux cleaned = -0.000131451 Jy
! Component: 1650  -  total flux cleaned = -9.30203e-05 Jy
! Component: 1700  -  total flux cleaned = -0.00011857 Jy
! Component: 1750  -  total flux cleaned = -0.000105932 Jy
! Component: 1800  -  total flux cleaned = -6.83672e-05 Jy
! Component: 1850  -  total flux cleaned = -6.85409e-05 Jy
! Component: 1900  -  total flux cleaned = -5.62829e-05 Jy
! Component: 1950  -  total flux cleaned = 2.91958e-05 Jy
! Component: 2000  -  total flux cleaned = -1.94255e-05 Jy
! Component: 2050  -  total flux cleaned = 4.41811e-06 Jy
! Component: 2100  -  total flux cleaned = 1.62563e-05 Jy
! Component: 2150  -  total flux cleaned = 4.29577e-06 Jy
! Component: 2200  -  total flux cleaned = -4.26375e-05 Jy
! Component: 2250  -  total flux cleaned = -1.94383e-05 Jy
! Component: 2300  -  total flux cleaned = -3.10621e-05 Jy
! Component: 2350  -  total flux cleaned = -1.98522e-05 Jy
! Component: 2400  -  total flux cleaned = -9.9213e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000110506 Jy
! Component: 2500  -  total flux cleaned = -6.57806e-05 Jy
! Component: 2550  -  total flux cleaned = -9.91239e-05 Jy
! Component: 2600  -  total flux cleaned = -0.000121078 Jy
! Component: 2650  -  total flux cleaned = -8.83025e-05 Jy
! Component: 2700  -  total flux cleaned = -7.75751e-05 Jy
! Component: 2750  -  total flux cleaned = -0.000120621 Jy
! Component: 2800  -  total flux cleaned = -7.76704e-05 Jy
! Component: 2850  -  total flux cleaned = -5.6493e-05 Jy
! Component: 2900  -  total flux cleaned = -7.7705e-05 Jy
! Component: 2950  -  total flux cleaned = -7.77221e-05 Jy
! Component: 3000  -  total flux cleaned = -4.66448e-05 Jy
! Component: 3050  -  total flux cleaned = -5.7089e-05 Jy
! Component: 3100  -  total flux cleaned = 4.55647e-06 Jy
! Component: 3150  -  total flux cleaned = -5.62427e-06 Jy
! Component: 3200  -  total flux cleaned = 1.46659e-05 Jy
! Component: 3250  -  total flux cleaned = 4.49375e-05 Jy
! Component: 3300  -  total flux cleaned = 4.97167e-06 Jy
! Component: 3350  -  total flux cleaned = 1.50128e-05 Jy
! Component: 3400  -  total flux cleaned = 7.42901e-05 Jy
! Component: 3450  -  total flux cleaned = 7.42774e-05 Jy
! Component: 3500  -  total flux cleaned = 0.00010352 Jy
! Component: 3550  -  total flux cleaned = 8.40485e-05 Jy
! Component: 3600  -  total flux cleaned = 0.000103439 Jy
! Component: 3650  -  total flux cleaned = 8.42734e-05 Jy
! Component: 3700  -  total flux cleaned = 8.42359e-05 Jy
! Component: 3750  -  total flux cleaned = 0.000131501 Jy
! Component: 3800  -  total flux cleaned = 0.000187815 Jy
! Component: 3850  -  total flux cleaned = 0.000159829 Jy
! Component: 3900  -  total flux cleaned = 0.000178515 Jy
! Component: 3950  -  total flux cleaned = 0.000224732 Jy
! Component: 4000  -  total flux cleaned = 0.00025231 Jy
! Component: 4050  -  total flux cleaned = 0.000243254 Jy
! Total flux subtracted in 4096 components = 0.000297731 Jy
! Clean residual min=-0.000453 max=0.000591 Jy/beam
! Clean residual mean=-0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.172392 Jy
keep
! Adding 363 model components to the UV plane model.
! The established model now contains 450 components and 0.172392 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1106+2812_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8918 x 1.775 at -1.61 degrees (North through East)
! Clean map  min=-0.0009258  max=0.15795 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1106+2812_X_map.fits
wmodel /vlbi/uf001/uva//J1106+2812_X_map.mod
! Writing 450 model components to file: /vlbi/uf001/uva//J1106+2812_X_map.mod
wobs   /vlbi/uf001/uva//J1106+2812_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1106+2812_X_uvs.fits
wwins  /vlbi/uf001/uva//J1106+2812_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1106+2812_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157948 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000164395 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.312244 0.312244 0.624488 1.24898 2.49795 4.99591 9.99182 19.9836 39.9673 79.9345
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  960.786 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1106+2812_X_dfm.log closed on Mon Jan 14 01:08:15 2019