! Started logfile: /vlbi/uf001/uva//J1105-3928_X_dfm.log on Mon Jan 14 01:07:59 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1105-3928_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1105-3928_X_uva.fits
! AN table 1: 68 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.879085 visibilities/baseline/integration-bin.
! Found source: J1105-3928
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25824 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1105-3928_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016967Jy  sigma=16.375236
! Fit after  self-cal, rms=0.873617Jy  sigma=13.816612
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5496 mas, bmaj=1.559 mas, bpa=-6.191 degrees
! Estimated noise=0.61767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0890845 Jy
! Component: 100  -  total flux cleaned = 0.11996 Jy
! Total flux subtracted in 100 components = 0.11996 Jy
! Clean residual min=-0.010962 max=0.024353 Jy/beam
! Clean residual mean=0.000045 rms=0.002793 Jy/beam
! Combined flux in latest and established models = 0.11996 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.11996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101920Jy  sigma=1.556293
! Fit after  self-cal, rms=0.101729Jy  sigma=1.554574
! Inverting map 
! Added new window around map position (0.6, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022694 Jy
! Component: 100  -  total flux cleaned = 0.0362772 Jy
! Total flux subtracted in 100 components = 0.0362772 Jy
! Clean residual min=-0.008084 max=0.014309 Jy/beam
! Clean residual mean=0.000031 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 0.156237 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.156237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094578Jy  sigma=1.388992
! Fit after  self-cal, rms=0.094058Jy  sigma=1.380320
! Inverting map 
! Added new window around map position (-1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132303 Jy
! Component: 100  -  total flux cleaned = 0.0222447 Jy
! Total flux subtracted in 100 components = 0.0222447 Jy
! Clean residual min=-0.006841 max=0.010105 Jy/beam
! Clean residual mean=0.000023 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.178482 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.178482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091253Jy  sigma=1.316832
! Fit after  self-cal, rms=0.091144Jy  sigma=1.315379
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7513 mas, bmaj=1.996 mas, bpa=-5.754 degrees
! Estimated noise=0.289253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125224 Jy
! Component: 100  -  total flux cleaned = 0.0203626 Jy
! Component: 150  -  total flux cleaned = 0.025543 Jy
! Component: 200  -  total flux cleaned = 0.029 Jy
! Total flux subtracted in 200 components = 0.029 Jy
! Clean residual min=-0.007735 max=0.009564 Jy/beam
! Clean residual mean=0.000041 rms=0.002068 Jy/beam
! Combined flux in latest and established models = 0.207482 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 47 components and 0.207482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089590Jy  sigma=1.275855
! Fit after  self-cal, rms=0.089488Jy  sigma=1.273818
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7513 x 1.996 at -5.754 degrees (North through East)
! Clean map  min=-0.0069869  max=0.11498 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.21     KP        0.98     LA        0.96     
!   MK        1.05     NL        1.43     OV        0.94     PT        0.91     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.38     KP        0.98     LA        0.99     
!   MK        1.05     NL        1.40     OV        0.93     PT        0.92     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        1.32     KP        0.95     LA        0.94     
!   MK        1.04     NL        1.44     OV        0.96     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.39     KP        0.94     LA        0.97     
!   MK        1.06     NL        1.48     OV        0.95     PT        0.93     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.33     KP        0.93     LA        0.96     
!   MK        1.05     NL        1.43     OV        0.94     PT        0.93     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.42     KP        0.96     LA        0.97     
!   MK        1.01     NL        1.39     OV        0.93     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.28     KP        0.96     LA        0.99     
!   MK        1.01     NL        1.46     OV        0.94     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.18     KP        0.97     LA        0.98     
!   MK        1.03     NL        1.49     OV        0.91     PT        0.93     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.30     KP        0.94     LA        0.96     
!   MK        1.03     NL        1.41     OV        0.95     PT        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.26     KP        0.99     LA        0.94     
!   MK        1.00     NL        1.40     OV        0.94     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.30     KP        0.98     LA        0.95     
!   MK        1.01     NL        1.43     OV        0.92     PT        0.90     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.42     KP        0.94     LA        0.95     
!   MK        0.93     NL        1.32     OV        0.94     PT        0.92     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.089488Jy  sigma=1.273818
! Fit after  self-cal, rms=0.104264Jy  sigma=1.234566
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7576 mas, bmaj=1.99 mas, bpa=-5.11 degrees
! Estimated noise=0.299018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564773 Jy
! Component: 100  -  total flux cleaned = 0.00586284 Jy
! Component: 150  -  total flux cleaned = 0.00637149 Jy
! Component: 200  -  total flux cleaned = 0.00680662 Jy
! Total flux subtracted in 200 components = 0.00680662 Jy
! Clean residual min=-0.004489 max=0.004718 Jy/beam
! Clean residual mean=0.000008 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 0.214289 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 76 components and 0.214289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103335Jy  sigma=1.218386
! Fit after  self-cal, rms=0.103696Jy  sigma=1.216493
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103696Jy  sigma=1.216493
! Fit after  self-cal, rms=0.105524Jy  sigma=1.215011
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7607 mas, bmaj=1.993 mas, bpa=-4.792 degrees
! Estimated noise=0.296382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116304 Jy
! Component: 100  -  total flux cleaned = -0.000300043 Jy
! Component: 150  -  total flux cleaned = -0.000186231 Jy
! Component: 200  -  total flux cleaned = -0.000188134 Jy
! Total flux subtracted in 200 components = -0.000188134 Jy
! Clean residual min=-0.003687 max=0.004080 Jy/beam
! Clean residual mean=0.000011 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.214101 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 0.214101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105147Jy  sigma=1.209711
! Fit after  self-cal, rms=0.105158Jy  sigma=1.209259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000447986 Jy
! Component: 100  -  total flux cleaned = 0.000731453 Jy
! Component: 150  -  total flux cleaned = 0.000903762 Jy
! Component: 200  -  total flux cleaned = 0.0009846 Jy
! Total flux subtracted in 200 components = 0.0009846 Jy
! Clean residual min=-0.003528 max=0.003765 Jy/beam
! Clean residual mean=0.000010 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.215085 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 101 components and 0.215085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104990Jy  sigma=1.207069
! Fit after  self-cal, rms=0.104993Jy  sigma=1.206918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104993Jy  sigma=1.206918
! Fit after  self-cal, rms=0.109127Jy  sigma=1.196270
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7662 mas, bmaj=1.997 mas, bpa=-4.651 degrees
! Estimated noise=0.294445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388918 Jy
! Component: 100  -  total flux cleaned = 0.000254789 Jy
! Component: 150  -  total flux cleaned = 0.00035372 Jy
! Component: 200  -  total flux cleaned = 0.000489665 Jy
! Total flux subtracted in 200 components = 0.000489665 Jy
! Clean residual min=-0.002559 max=0.002168 Jy/beam
! Clean residual mean=0.000006 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.215575 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.215575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109055Jy  sigma=1.194901
! Fit after  self-cal, rms=0.109052Jy  sigma=1.194629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023551 Jy
! Component: 100  -  total flux cleaned = 0.000400277 Jy
! Component: 150  -  total flux cleaned = 0.000437965 Jy
! Component: 200  -  total flux cleaned = 0.00054062 Jy
! Total flux subtracted in 200 components = 0.00054062 Jy
! Clean residual min=-0.002389 max=0.002057 Jy/beam
! Clean residual mean=0.000006 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.216115 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 131 components and 0.216115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109024Jy  sigma=1.194148
! Fit after  self-cal, rms=0.109027Jy  sigma=1.194125
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109027Jy  sigma=1.194125
! Fit after  self-cal, rms=0.110160Jy  sigma=1.193854
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=7.923 mas, bpa=-1.599 degrees
! Estimated noise=0.378308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000416934 Jy
! Component: 100  -  total flux cleaned = -0.000457917 Jy
! Component: 150  -  total flux cleaned = -0.00048902 Jy
! Component: 200  -  total flux cleaned = -0.000488634 Jy
! Total flux subtracted in 200 components = -0.000488634 Jy
! Clean residual min=-0.002871 max=0.002226 Jy/beam
! Clean residual mean=0.000010 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.215627 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 137 components and 0.215627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110136Jy  sigma=1.193619
! Fit after  self-cal, rms=0.110155Jy  sigma=1.193551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222259 Jy
! Component: 100  -  total flux cleaned = 0.000250083 Jy
! Component: 150  -  total flux cleaned = 0.000224964 Jy
! Component: 200  -  total flux cleaned = 0.000202393 Jy
! Total flux subtracted in 200 components = 0.000202393 Jy
! Clean residual min=-0.002668 max=0.002046 Jy/beam
! Clean residual mean=0.000009 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.215829 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 138 components and 0.215829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110147Jy  sigma=1.193526
! Fit after  self-cal, rms=0.110152Jy  sigma=1.193506
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7667 mas, bmaj=1.998 mas, bpa=-4.421 degrees
! Estimated noise=0.293768 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7667 x 1.998 at -4.421 degrees (North through East)
! Clean map  min=-0.0028942  max=0.12145 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5575 mas, bmaj=1.546 mas, bpa=-4.683 degrees
! Estimated noise=0.637285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0914301 Jy
! Component: 100  -  total flux cleaned = 0.125332 Jy
! Component: 150  -  total flux cleaned = 0.144957 Jy
! Component: 200  -  total flux cleaned = 0.158095 Jy
! Total flux subtracted in 200 components = 0.158095 Jy
! Clean residual min=-0.007162 max=0.010023 Jy/beam
! Clean residual mean=0.000023 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 0.158095 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.158095 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7667 mas, bmaj=1.998 mas, bpa=-4.421 degrees
! Estimated noise=0.293768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163922 Jy
! Component: 100  -  total flux cleaned = 0.0274328 Jy
! Component: 150  -  total flux cleaned = 0.0354004 Jy
! Component: 200  -  total flux cleaned = 0.0412238 Jy
! Total flux subtracted in 200 components = 0.0412238 Jy
! Clean residual min=-0.003358 max=0.004148 Jy/beam
! Clean residual mean=0.000025 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.199318 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 58 components and 0.199318 Jy
! Inverting map 
! Added new window around map position (-2.8, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454861 Jy
! Component: 100  -  total flux cleaned = 0.00785734 Jy
! Component: 150  -  total flux cleaned = 0.0103581 Jy
! Component: 200  -  total flux cleaned = 0.0122576 Jy
! Total flux subtracted in 200 components = 0.0122576 Jy
! Clean residual min=-0.002569 max=0.002191 Jy/beam
! Clean residual mean=0.000010 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.211576 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.211576 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=7.923 mas, bpa=-1.599 degrees
! Estimated noise=0.378308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206337 Jy
! Component: 100  -  total flux cleaned = 0.00318248 Jy
! Component: 150  -  total flux cleaned = 0.00373348 Jy
! Component: 200  -  total flux cleaned = 0.00383634 Jy
! Total flux subtracted in 200 components = 0.00383634 Jy
! Clean residual min=-0.002634 max=0.002077 Jy/beam
! Clean residual mean=0.000010 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.215412 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.3706e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122689 Jy
! Component: 150  -  total flux cleaned = 0.000166326 Jy
! Component: 200  -  total flux cleaned = 0.000196083 Jy
! Total flux subtracted in 200 components = 0.000196083 Jy
! Clean residual min=-0.002604 max=0.002090 Jy/beam
! Clean residual mean=0.000009 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.215608 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 0.215608 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7667 mas, bmaj=1.998 mas, bpa=-4.421 degrees
! Estimated noise=0.293768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348835 Jy
! Component: 100  -  total flux cleaned = 0.000377582 Jy
! Component: 150  -  total flux cleaned = 0.000455773 Jy
! Component: 200  -  total flux cleaned = 0.000478768 Jy
! Total flux subtracted in 200 components = 0.000478768 Jy
! Clean residual min=-0.002298 max=0.001801 Jy/beam
! Clean residual mean=0.000004 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.216087 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 106 components and 0.216087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110155Jy  sigma=1.193075
! Fit after  self-cal, rms=0.110141Jy  sigma=1.192870
wmodel J1105-3928_X_map.mod
! Writing 106 model components to file: J1105-3928_X_map.mod
wobs   J1105-3928_X_uvs.fits
! Writing UV FITS file: J1105-3928_X_uvs.fits
wwins  J1105-3928_X_map.win
! wwins: Wrote 5 windows to J1105-3928_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000728306 Jy
! Component: 100  -  total flux cleaned = -0.000985983 Jy
! Component: 150  -  total flux cleaned = -0.00116832 Jy
! Component: 200  -  total flux cleaned = -0.00116979 Jy
! Component: 250  -  total flux cleaned = -0.00117002 Jy
! Component: 300  -  total flux cleaned = -0.00109138 Jy
! Component: 350  -  total flux cleaned = -0.00104086 Jy
! Component: 400  -  total flux cleaned = -0.000992028 Jy
! Component: 450  -  total flux cleaned = -0.00101558 Jy
! Component: 500  -  total flux cleaned = -0.000923886 Jy
! Component: 550  -  total flux cleaned = -0.000857021 Jy
! Component: 600  -  total flux cleaned = -0.000769466 Jy
! Component: 650  -  total flux cleaned = -0.00068362 Jy
! Component: 700  -  total flux cleaned = -0.000579052 Jy
! Component: 750  -  total flux cleaned = -0.000497315 Jy
! Component: 800  -  total flux cleaned = -0.000437226 Jy
! Component: 850  -  total flux cleaned = -0.000358462 Jy
! Component: 900  -  total flux cleaned = -0.000281178 Jy
! Component: 950  -  total flux cleaned = -0.000185484 Jy
! Component: 1000  -  total flux cleaned = -5.38895e-05 Jy
! Component: 1050  -  total flux cleaned = 2.09974e-06 Jy
! Component: 1100  -  total flux cleaned = 0.000166442 Jy
! Component: 1150  -  total flux cleaned = 0.000274482 Jy
! Component: 1200  -  total flux cleaned = 0.000434482 Jy
! Component: 1250  -  total flux cleaned = 0.000504388 Jy
! Component: 1300  -  total flux cleaned = 0.000642448 Jy
! Component: 1350  -  total flux cleaned = 0.000693784 Jy
! Component: 1400  -  total flux cleaned = 0.000811812 Jy
! Component: 1450  -  total flux cleaned = 0.00089496 Jy
! Component: 1500  -  total flux cleaned = 0.00096108 Jy
! Component: 1550  -  total flux cleaned = 0.00109175 Jy
! Component: 1600  -  total flux cleaned = 0.00118842 Jy
! Component: 1650  -  total flux cleaned = 0.0012201 Jy
! Component: 1700  -  total flux cleaned = 0.00133036 Jy
! Component: 1750  -  total flux cleaned = 0.00137709 Jy
! Component: 1800  -  total flux cleaned = 0.00148501 Jy
! Component: 1850  -  total flux cleaned = 0.00159181 Jy
! Component: 1900  -  total flux cleaned = 0.00165224 Jy
! Component: 1950  -  total flux cleaned = 0.0017121 Jy
! Component: 2000  -  total flux cleaned = 0.0017862 Jy
! Component: 2050  -  total flux cleaned = 0.00187438 Jy
! Component: 2100  -  total flux cleaned = 0.00188889 Jy
! Component: 2150  -  total flux cleaned = 0.00196122 Jy
! Component: 2200  -  total flux cleaned = 0.00206131 Jy
! Component: 2250  -  total flux cleaned = 0.00213217 Jy
! Component: 2300  -  total flux cleaned = 0.00217421 Jy
! Component: 2350  -  total flux cleaned = 0.00225768 Jy
! Component: 2400  -  total flux cleaned = 0.00235457 Jy
! Component: 2450  -  total flux cleaned = 0.00240938 Jy
! Component: 2500  -  total flux cleaned = 0.00250466 Jy
! Component: 2550  -  total flux cleaned = 0.00258579 Jy
! Component: 2600  -  total flux cleaned = 0.00266631 Jy
! Component: 2650  -  total flux cleaned = 0.00273295 Jy
! Component: 2700  -  total flux cleaned = 0.00282555 Jy
! Component: 2750  -  total flux cleaned = 0.00287802 Jy
! Component: 2800  -  total flux cleaned = 0.00295631 Jy
! Component: 2850  -  total flux cleaned = 0.00304693 Jy
! Component: 2900  -  total flux cleaned = 0.0030983 Jy
! Component: 2950  -  total flux cleaned = 0.00313662 Jy
! Component: 3000  -  total flux cleaned = 0.00317472 Jy
! Component: 3050  -  total flux cleaned = 0.0032379 Jy
! Component: 3100  -  total flux cleaned = 0.0032756 Jy
! Component: 3150  -  total flux cleaned = 0.00332543 Jy
! Component: 3200  -  total flux cleaned = 0.00337501 Jy
! Component: 3250  -  total flux cleaned = 0.00339968 Jy
! Component: 3300  -  total flux cleaned = 0.00339966 Jy
! Component: 3350  -  total flux cleaned = 0.00342404 Jy
! Component: 3400  -  total flux cleaned = 0.0034725 Jy
! Component: 3450  -  total flux cleaned = 0.00348455 Jy
! Component: 3500  -  total flux cleaned = 0.00350852 Jy
! Component: 3550  -  total flux cleaned = 0.00349667 Jy
! Component: 3600  -  total flux cleaned = 0.00352029 Jy
! Component: 3650  -  total flux cleaned = 0.00352032 Jy
! Component: 3700  -  total flux cleaned = 0.00352032 Jy
! Component: 3750  -  total flux cleaned = 0.00350879 Jy
! Component: 3800  -  total flux cleaned = 0.00355517 Jy
! Component: 3850  -  total flux cleaned = 0.00357827 Jy
! Component: 3900  -  total flux cleaned = 0.00360115 Jy
! Component: 3950  -  total flux cleaned = 0.00362388 Jy
! Component: 4000  -  total flux cleaned = 0.0036238 Jy
! Component: 4050  -  total flux cleaned = 0.00362377 Jy
! Total flux subtracted in 4096 components = 0.00362382 Jy
! Clean residual min=-0.000821 max=0.000581 Jy/beam
! Clean residual mean=0.000003 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.219711 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 386 components and 0.219711 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1105-3928_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7667 x 1.998 at -4.421 degrees (North through East)
! Clean map  min=-0.0013302  max=0.12484 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1105-3928_X_map.fits
wmodel /vlbi/uf001/uva//J1105-3928_X_map.mod
! Writing 386 model components to file: /vlbi/uf001/uva//J1105-3928_X_map.mod
wobs   /vlbi/uf001/uva//J1105-3928_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1105-3928_X_uvs.fits
wwins  /vlbi/uf001/uva//J1105-3928_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1105-3928_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.124836 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018607 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.447154 0.447154 0.894308 1.78862 3.57723 7.15446 14.3089 28.6179 57.2357
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.124 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  670.909 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1105-3928_X_dfm.log closed on Mon Jan 14 01:08:04 2019