! Started logfile: /vlbi/uf001/uva//J1104+6038_S_dfm.log on Mon Jan 14 01:06:26 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1104+6038_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1104+6038_S_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888506 visibilities/baseline/integration-bin.
! Found source: J1104+6038
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 13914 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1104+6038_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009422Jy  sigma=20.982952
! Fit after  self-cal, rms=0.876786Jy  sigma=18.189686
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.586 mas, bmaj=3.752 mas, bpa=44.65 degrees
! Estimated noise=0.487167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0943286 Jy
! Component: 100  -  total flux cleaned = 0.116804 Jy
! Total flux subtracted in 100 components = 0.116804 Jy
! Clean residual min=-0.003760 max=0.008446 Jy/beam
! Clean residual mean=-0.000017 rms=0.000963 Jy/beam
! Combined flux in latest and established models = 0.116804 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.116804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066314Jy  sigma=1.284795
! Fit after  self-cal, rms=0.066302Jy  sigma=1.284496
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00894106 Jy
! Component: 100  -  total flux cleaned = 0.0135625 Jy
! Total flux subtracted in 100 components = 0.0135625 Jy
! Clean residual min=-0.003013 max=0.004953 Jy/beam
! Clean residual mean=-0.000009 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.130367 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.130367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064622Jy  sigma=1.245724
! Fit after  self-cal, rms=0.064605Jy  sigma=1.245206
! Inverting map 
! Added new window around map position (1, -12).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047798 Jy
! Component: 100  -  total flux cleaned = 0.00791073 Jy
! Total flux subtracted in 100 components = 0.00791073 Jy
! Clean residual min=-0.002886 max=0.003684 Jy/beam
! Clean residual mean=-0.000005 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.138277 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 0.138277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064091Jy  sigma=1.233083
! Fit after  self-cal, rms=0.064065Jy  sigma=1.232611
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.327 mas, bmaj=4.611 mas, bpa=33.67 degrees
! Estimated noise=0.300173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467149 Jy
! Component: 100  -  total flux cleaned = 0.00785821 Jy
! Component: 150  -  total flux cleaned = 0.0102911 Jy
! Component: 200  -  total flux cleaned = 0.0121851 Jy
! Total flux subtracted in 200 components = 0.0121851 Jy
! Clean residual min=-0.002492 max=0.003221 Jy/beam
! Clean residual mean=0.000000 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.150462 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 72 components and 0.150462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063629Jy  sigma=1.222990
! Fit after  self-cal, rms=0.063610Jy  sigma=1.222521
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.327 x 4.611 at 33.67 degrees (North through East)
! Clean map  min=-0.0024887  max=0.12365 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.01     KP        1.03     
!   LA        0.88     MK        1.03     NL        1.08     OV        1.04     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.03     KP        1.01     
!   LA        0.91     MK        1.08     NL        1.02     OV        0.98     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.00     KP        1.01     
!   LA        0.92     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.063610Jy  sigma=1.222521
! Fit after  self-cal, rms=0.062891Jy  sigma=1.210755
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.362 mas, bmaj=4.664 mas, bpa=33.04 degrees
! Estimated noise=0.299432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279882 Jy
! Component: 100  -  total flux cleaned = 0.00442332 Jy
! Component: 150  -  total flux cleaned = 0.00557078 Jy
! Component: 200  -  total flux cleaned = 0.00616846 Jy
! Total flux subtracted in 200 components = 0.00616846 Jy
! Clean residual min=-0.001577 max=0.001918 Jy/beam
! Clean residual mean=0.000012 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.156631 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 99 components and 0.156631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062768Jy  sigma=1.207341
! Fit after  self-cal, rms=0.062780Jy  sigma=1.206965
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062780Jy  sigma=1.206965
! Fit after  self-cal, rms=0.062428Jy  sigma=1.200306
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.347 mas, bmaj=4.67 mas, bpa=32.16 degrees
! Estimated noise=0.299296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251542 Jy
! Component: 100  -  total flux cleaned = 0.000196287 Jy
! Component: 150  -  total flux cleaned = 0.000170839 Jy
! Component: 200  -  total flux cleaned = 0.000148577 Jy
! Total flux subtracted in 200 components = 0.000148577 Jy
! Clean residual min=-0.001317 max=0.001268 Jy/beam
! Clean residual mean=0.000005 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.156779 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 0.156779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062407Jy  sigma=1.199832
! Fit after  self-cal, rms=0.062415Jy  sigma=1.199731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011655 Jy
! Component: 100  -  total flux cleaned = 0.000116918 Jy
! Component: 150  -  total flux cleaned = 0.0001526 Jy
! Component: 200  -  total flux cleaned = 0.00016923 Jy
! Total flux subtracted in 200 components = 0.00016923 Jy
! Clean residual min=-0.001305 max=0.001266 Jy/beam
! Clean residual mean=0.000005 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.156949 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 125 components and 0.156949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062406Jy  sigma=1.199522
! Fit after  self-cal, rms=0.062405Jy  sigma=1.199518
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062405Jy  sigma=1.199518
! Fit after  self-cal, rms=0.062409Jy  sigma=1.199461
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.349 mas, bmaj=4.675 mas, bpa=31.97 degrees
! Estimated noise=0.298968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236536 Jy
! Component: 100  -  total flux cleaned = -0.000290053 Jy
! Component: 150  -  total flux cleaned = -0.000306248 Jy
! Component: 200  -  total flux cleaned = -0.000320881 Jy
! Total flux subtracted in 200 components = -0.000320881 Jy
! Clean residual min=-0.001286 max=0.001244 Jy/beam
! Clean residual mean=0.000004 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.156628 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.156628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062401Jy  sigma=1.199277
! Fit after  self-cal, rms=0.062402Jy  sigma=1.199269
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.73158e-05 Jy
! Component: 100  -  total flux cleaned = 6.06945e-05 Jy
! Component: 150  -  total flux cleaned = 4.76603e-05 Jy
! Component: 200  -  total flux cleaned = 7.22222e-05 Jy
! Total flux subtracted in 200 components = 7.22222e-05 Jy
! Clean residual min=-0.001277 max=0.001237 Jy/beam
! Clean residual mean=0.000004 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.1567 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 136 components and 0.1567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062397Jy  sigma=1.199165
! Fit after  self-cal, rms=0.062397Jy  sigma=1.199161
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062397Jy  sigma=1.199161
! Fit after  self-cal, rms=0.062392Jy  sigma=1.199136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.184 mas, bmaj=8.705 mas, bpa=63.94 degrees
! Estimated noise=0.366188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.914e-05 Jy
! Component: 100  -  total flux cleaned = 1.93433e-05 Jy
! Component: 150  -  total flux cleaned = 3.10452e-05 Jy
! Component: 200  -  total flux cleaned = 4.88758e-05 Jy
! Total flux subtracted in 200 components = 4.88758e-05 Jy
! Clean residual min=-0.001228 max=0.001449 Jy/beam
! Clean residual mean=0.000009 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.156749 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.156749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062392Jy  sigma=1.199059
! Fit after  self-cal, rms=0.062392Jy  sigma=1.199050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.51134e-05 Jy
! Component: 100  -  total flux cleaned = -9.6566e-06 Jy
! Component: 150  -  total flux cleaned = -2.35933e-06 Jy
! Component: 200  -  total flux cleaned = 1.09221e-05 Jy
! Total flux subtracted in 200 components = 1.09221e-05 Jy
! Clean residual min=-0.001231 max=0.001436 Jy/beam
! Clean residual mean=0.000009 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.15676 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 158 components and 0.15676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062392Jy  sigma=1.199033
! Fit after  self-cal, rms=0.062391Jy  sigma=1.199032
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.352 mas, bmaj=4.681 mas, bpa=31.78 degrees
! Estimated noise=0.298702 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.352 x 4.681 at 31.78 degrees (North through East)
! Clean map  min=-0.0012454  max=0.12301 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.591 mas, bmaj=3.804 mas, bpa=41.39 degrees
! Estimated noise=0.488488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0943911 Jy
! Component: 100  -  total flux cleaned = 0.117155 Jy
! Component: 150  -  total flux cleaned = 0.126173 Jy
! Component: 200  -  total flux cleaned = 0.131291 Jy
! Total flux subtracted in 200 components = 0.131291 Jy
! Clean residual min=-0.002578 max=0.002869 Jy/beam
! Clean residual mean=-0.000009 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.131291 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.131291 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.352 mas, bmaj=4.681 mas, bpa=31.78 degrees
! Estimated noise=0.298702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562631 Jy
! Component: 100  -  total flux cleaned = 0.00940372 Jy
! Component: 150  -  total flux cleaned = 0.0122419 Jy
! Component: 200  -  total flux cleaned = 0.0144287 Jy
! Total flux subtracted in 200 components = 0.0144287 Jy
! Clean residual min=-0.001427 max=0.001425 Jy/beam
! Clean residual mean=-0.000004 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.14572 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 0.14572 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.184 mas, bmaj=8.705 mas, bpa=63.94 degrees
! Estimated noise=0.366188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027911 Jy
! Component: 100  -  total flux cleaned = 0.00469738 Jy
! Component: 150  -  total flux cleaned = 0.00610721 Jy
! Component: 200  -  total flux cleaned = 0.00718688 Jy
! Total flux subtracted in 200 components = 0.00718688 Jy
! Clean residual min=-0.001396 max=0.001443 Jy/beam
! Clean residual mean=0.000003 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.152907 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000842123 Jy
! Component: 100  -  total flux cleaned = 0.0015111 Jy
! Component: 150  -  total flux cleaned = 0.00204461 Jy
! Component: 200  -  total flux cleaned = 0.00247096 Jy
! Total flux subtracted in 200 components = 0.00247096 Jy
! Clean residual min=-0.001257 max=0.001452 Jy/beam
! Clean residual mean=0.000007 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.155378 Jy
! Adding 136 model components to the UV plane model.
! The established model now contains 187 components and 0.155378 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.352 mas, bmaj=4.681 mas, bpa=31.78 degrees
! Estimated noise=0.298702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125521 Jy
! Component: 100  -  total flux cleaned = 0.000360758 Jy
! Component: 150  -  total flux cleaned = 0.000543583 Jy
! Component: 200  -  total flux cleaned = 0.000634408 Jy
! Total flux subtracted in 200 components = 0.000634408 Jy
! Clean residual min=-0.001374 max=0.001309 Jy/beam
! Clean residual mean=0.000004 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.156012 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 207 components and 0.156012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062416Jy  sigma=1.199367
! Fit after  self-cal, rms=0.062406Jy  sigma=1.199254
wmodel J1104+6038_S_map.mod
! Writing 207 model components to file: J1104+6038_S_map.mod
wobs   J1104+6038_S_uvs.fits
! Writing UV FITS file: J1104+6038_S_uvs.fits
wwins  J1104+6038_S_map.win
! wwins: Wrote 4 windows to J1104+6038_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.21034e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147062 Jy
! Component: 150  -  total flux cleaned = 0.000275938 Jy
! Component: 200  -  total flux cleaned = 0.000255687 Jy
! Component: 250  -  total flux cleaned = 0.000215894 Jy
! Component: 300  -  total flux cleaned = 0.000196333 Jy
! Component: 350  -  total flux cleaned = 0.000176807 Jy
! Component: 400  -  total flux cleaned = 0.00013945 Jy
! Component: 450  -  total flux cleaned = 0.000212635 Jy
! Component: 500  -  total flux cleaned = 0.000212496 Jy
! Component: 550  -  total flux cleaned = 0.0002125 Jy
! Component: 600  -  total flux cleaned = 0.000229721 Jy
! Component: 650  -  total flux cleaned = 0.000246685 Jy
! Component: 700  -  total flux cleaned = 0.000246458 Jy
! Component: 750  -  total flux cleaned = 0.000213178 Jy
! Component: 800  -  total flux cleaned = 0.000213296 Jy
! Component: 850  -  total flux cleaned = 0.000180905 Jy
! Component: 900  -  total flux cleaned = 0.000213007 Jy
! Component: 950  -  total flux cleaned = 0.000197492 Jy
! Component: 1000  -  total flux cleaned = 0.000228809 Jy
! Component: 1050  -  total flux cleaned = 0.000213189 Jy
! Component: 1100  -  total flux cleaned = 0.000213065 Jy
! Component: 1150  -  total flux cleaned = 0.000182953 Jy
! Component: 1200  -  total flux cleaned = 0.0002127 Jy
! Component: 1250  -  total flux cleaned = 0.000197985 Jy
! Component: 1300  -  total flux cleaned = 0.00024191 Jy
! Component: 1350  -  total flux cleaned = 0.000256455 Jy
! Component: 1400  -  total flux cleaned = 0.000285312 Jy
! Component: 1450  -  total flux cleaned = 0.000285175 Jy
! Component: 1500  -  total flux cleaned = 0.000299508 Jy
! Component: 1550  -  total flux cleaned = 0.000327596 Jy
! Component: 1600  -  total flux cleaned = 0.000272357 Jy
! Component: 1650  -  total flux cleaned = 0.000286122 Jy
! Component: 1700  -  total flux cleaned = 0.000313455 Jy
! Component: 1750  -  total flux cleaned = 0.000367617 Jy
! Component: 1800  -  total flux cleaned = 0.000367555 Jy
! Component: 1850  -  total flux cleaned = 0.000314446 Jy
! Component: 1900  -  total flux cleaned = 0.000327679 Jy
! Component: 1950  -  total flux cleaned = 0.000353803 Jy
! Component: 2000  -  total flux cleaned = 0.000353752 Jy
! Component: 2050  -  total flux cleaned = 0.000302133 Jy
! Component: 2100  -  total flux cleaned = 0.000365984 Jy
! Component: 2150  -  total flux cleaned = 0.000277235 Jy
! Component: 2200  -  total flux cleaned = 0.000314954 Jy
! Component: 2250  -  total flux cleaned = 0.000239875 Jy
! Component: 2300  -  total flux cleaned = 0.000289639 Jy
! Component: 2350  -  total flux cleaned = 0.000277082 Jy
! Component: 2400  -  total flux cleaned = 0.000264816 Jy
! Component: 2450  -  total flux cleaned = 0.000216172 Jy
! Component: 2500  -  total flux cleaned = 0.000264353 Jy
! Component: 2550  -  total flux cleaned = 0.000192467 Jy
! Component: 2600  -  total flux cleaned = 0.000216203 Jy
! Component: 2650  -  total flux cleaned = 0.000204355 Jy
! Component: 2700  -  total flux cleaned = 0.00016915 Jy
! Component: 2750  -  total flux cleaned = 0.000180678 Jy
! Component: 2800  -  total flux cleaned = 0.000180655 Jy
! Component: 2850  -  total flux cleaned = 0.000111629 Jy
! Component: 2900  -  total flux cleaned = 0.000111619 Jy
! Component: 2950  -  total flux cleaned = 8.89242e-05 Jy
! Component: 3000  -  total flux cleaned = 6.63584e-05 Jy
! Component: 3050  -  total flux cleaned = 5.51645e-05 Jy
! Component: 3100  -  total flux cleaned = 2.17438e-05 Jy
! Component: 3150  -  total flux cleaned = -2.2491e-05 Jy
! Component: 3200  -  total flux cleaned = -5.94864e-07 Jy
! Component: 3250  -  total flux cleaned = -1.16358e-05 Jy
! Component: 3300  -  total flux cleaned = -1.15728e-05 Jy
! Component: 3350  -  total flux cleaned = -6.54942e-05 Jy
! Component: 3400  -  total flux cleaned = -2.25419e-05 Jy
! Component: 3450  -  total flux cleaned = -3.3141e-05 Jy
! Component: 3500  -  total flux cleaned = -3.3044e-05 Jy
! Component: 3550  -  total flux cleaned = -1.19453e-05 Jy
! Component: 3600  -  total flux cleaned = 9.00282e-06 Jy
! Component: 3650  -  total flux cleaned = -1.17607e-05 Jy
! Component: 3700  -  total flux cleaned = -1.18896e-05 Jy
! Component: 3750  -  total flux cleaned = -2.21284e-05 Jy
! Component: 3800  -  total flux cleaned = 8.53102e-06 Jy
! Component: 3850  -  total flux cleaned = -1.18364e-05 Jy
! Component: 3900  -  total flux cleaned = -5.23471e-05 Jy
! Component: 3950  -  total flux cleaned = -2.20778e-05 Jy
! Component: 4000  -  total flux cleaned = -2.21565e-05 Jy
! Component: 4050  -  total flux cleaned = 7.82807e-06 Jy
! Total flux subtracted in 4096 components = 1.77017e-05 Jy
! Clean residual min=-0.000574 max=0.000562 Jy/beam
! Clean residual mean=0.000003 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.15603 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 504 components and 0.15603 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1104+6038_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.352 x 4.681 at 31.78 degrees (North through East)
! Clean map  min=-0.0011589  max=0.1232 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1104+6038_S_map.fits
wmodel /vlbi/uf001/uva//J1104+6038_S_map.mod
! Writing 504 model components to file: /vlbi/uf001/uva//J1104+6038_S_map.mod
wobs   /vlbi/uf001/uva//J1104+6038_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1104+6038_S_uvs.fits
wwins  /vlbi/uf001/uva//J1104+6038_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1104+6038_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1232 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000178025 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.433502 0.433502 0.867004 1.73401 3.46802 6.93603 13.8721 27.7441 55.4883
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  692.038 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1104+6038_S_dfm.log closed on Mon Jan 14 01:06:31 2019