! Started logfile: /vlbi/uf001/uva//J1058+5628_S_dfm.log on Mon Jan 14 01:03:53 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1058+5628_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1058+5628_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.975049 visibilities/baseline/integration-bin.
! Found source: J1058+5628
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7503 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1058+5628_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043883Jy  sigma=23.268374
! Fit after  self-cal, rms=0.699197Jy  sigma=15.759359
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=3.953 mas, bpa=2.651 degrees
! Estimated noise=0.539992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.230382 Jy
! Component: 100  -  total flux cleaned = 0.283118 Jy
! Total flux subtracted in 100 components = 0.283118 Jy
! Clean residual min=-0.007522 max=0.019004 Jy/beam
! Clean residual mean=-0.000048 rms=0.001874 Jy/beam
! Combined flux in latest and established models = 0.283118 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.283118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072024Jy  sigma=1.522646
! Fit after  self-cal, rms=0.072005Jy  sigma=1.522325
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198323 Jy
! Component: 100  -  total flux cleaned = 0.0298499 Jy
! Total flux subtracted in 100 components = 0.0298499 Jy
! Clean residual min=-0.005378 max=0.009794 Jy/beam
! Clean residual mean=-0.000027 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.312968 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.312968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065504Jy  sigma=1.379587
! Fit after  self-cal, rms=0.065469Jy  sigma=1.378922
! Inverting map 
! Added new window around map position (-6, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00884269 Jy
! Component: 100  -  total flux cleaned = 0.0140731 Jy
! Total flux subtracted in 100 components = 0.0140731 Jy
! Clean residual min=-0.004849 max=0.005242 Jy/beam
! Clean residual mean=-0.000018 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.327041 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.327041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063946Jy  sigma=1.347082
! Fit after  self-cal, rms=0.063856Jy  sigma=1.344680
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.931 mas, bmaj=4.684 mas, bpa=1.921 degrees
! Estimated noise=0.373054 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536777 Jy
! Component: 100  -  total flux cleaned = 0.00856582 Jy
! Component: 150  -  total flux cleaned = 0.0107912 Jy
! Component: 200  -  total flux cleaned = 0.0123814 Jy
! Total flux subtracted in 200 components = 0.0123814 Jy
! Clean residual min=-0.004083 max=0.004747 Jy/beam
! Clean residual mean=-0.000017 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.339423 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 64 components and 0.339423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063287Jy  sigma=1.334209
! Fit after  self-cal, rms=0.063251Jy  sigma=1.333288
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.931 x 4.684 at 1.921 degrees (North through East)
! Clean map  min=-0.0038879  max=0.29764 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.94     MK        1.02     NL        1.03     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        1.01     
!   LA        0.96     MK        1.00     NL        1.08     OV        1.02     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.95     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.063251Jy  sigma=1.333288
! Fit after  self-cal, rms=0.062096Jy  sigma=1.303471
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=4.706 mas, bpa=1.537 degrees
! Estimated noise=0.374065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00156546 Jy
! Component: 100  -  total flux cleaned = -0.00192888 Jy
! Component: 150  -  total flux cleaned = -0.00219549 Jy
! Component: 200  -  total flux cleaned = -0.00234066 Jy
! Total flux subtracted in 200 components = -0.00234066 Jy
! Clean residual min=-0.002607 max=0.003182 Jy/beam
! Clean residual mean=0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.337082 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 79 components and 0.337082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062053Jy  sigma=1.302104
! Fit after  self-cal, rms=0.062056Jy  sigma=1.302003
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062056Jy  sigma=1.302003
! Fit after  self-cal, rms=0.059072Jy  sigma=1.254811
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.941 mas, bmaj=4.708 mas, bpa=2.144 degrees
! Estimated noise=0.373507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000638212 Jy
! Component: 100  -  total flux cleaned = -0.000947252 Jy
! Component: 150  -  total flux cleaned = -0.00116247 Jy
! Component: 200  -  total flux cleaned = -0.00128521 Jy
! Total flux subtracted in 200 components = -0.00128521 Jy
! Clean residual min=-0.001966 max=0.002326 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.335797 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 87 components and 0.335797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059018Jy  sigma=1.253359
! Fit after  self-cal, rms=0.059015Jy  sigma=1.253183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-67.5, 63).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205187 Jy
! Component: 100  -  total flux cleaned = 0.00246502 Jy
! Component: 150  -  total flux cleaned = 0.00261929 Jy
! Component: 200  -  total flux cleaned = 0.0026185 Jy
! Total flux subtracted in 200 components = 0.0026185 Jy
! Clean residual min=-0.001979 max=0.001943 Jy/beam
! Clean residual mean=-0.000003 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.338415 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 105 components and 0.338415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058930Jy  sigma=1.251183
! Fit after  self-cal, rms=0.058925Jy  sigma=1.251111
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058925Jy  sigma=1.251111
! Fit after  self-cal, rms=0.058891Jy  sigma=1.250888
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.939 mas, bmaj=4.709 mas, bpa=2.291 degrees
! Estimated noise=0.373242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.69329e-05 Jy
! Component: 100  -  total flux cleaned = -9.94303e-05 Jy
! Component: 150  -  total flux cleaned = -0.000127339 Jy
! Component: 200  -  total flux cleaned = -0.000154458 Jy
! Total flux subtracted in 200 components = -0.000154458 Jy
! Clean residual min=-0.001974 max=0.001840 Jy/beam
! Clean residual mean=-0.000003 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.338261 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.338261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058862Jy  sigma=1.250155
! Fit after  self-cal, rms=0.058860Jy  sigma=1.250126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.66199e-05 Jy
! Component: 100  -  total flux cleaned = -5.11395e-05 Jy
! Component: 150  -  total flux cleaned = -5.05355e-05 Jy
! Component: 200  -  total flux cleaned = -2.92197e-05 Jy
! Total flux subtracted in 200 components = -2.92197e-05 Jy
! Clean residual min=-0.002003 max=0.001816 Jy/beam
! Clean residual mean=-0.000003 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.338232 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 121 components and 0.338232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058842Jy  sigma=1.249732
! Fit after  self-cal, rms=0.058842Jy  sigma=1.249715
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058842Jy  sigma=1.249715
! Fit after  self-cal, rms=0.058829Jy  sigma=1.249650
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.116 mas, bmaj=8.515 mas, bpa=30.32 degrees
! Estimated noise=0.473742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110821 Jy
! Component: 100  -  total flux cleaned = 0.00011545 Jy
! Component: 150  -  total flux cleaned = 0.000134689 Jy
! Component: 200  -  total flux cleaned = 0.000182558 Jy
! Total flux subtracted in 200 components = 0.000182558 Jy
! Clean residual min=-0.002516 max=0.002061 Jy/beam
! Clean residual mean=-0.000005 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.338414 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 138 components and 0.338414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058826Jy  sigma=1.249611
! Fit after  self-cal, rms=0.058825Jy  sigma=1.249589
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.74605e-05 Jy
! Component: 100  -  total flux cleaned = 1.33445e-05 Jy
! Component: 150  -  total flux cleaned = 5.08485e-05 Jy
! Component: 200  -  total flux cleaned = 7.43414e-05 Jy
! Total flux subtracted in 200 components = 7.43414e-05 Jy
! Clean residual min=-0.002556 max=0.002063 Jy/beam
! Clean residual mean=-0.000005 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.338488 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 146 components and 0.338489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058823Jy  sigma=1.249522
! Fit after  self-cal, rms=0.058823Jy  sigma=1.249519
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.937 mas, bmaj=4.71 mas, bpa=2.409 degrees
! Estimated noise=0.373123 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.937 x 4.71 at 2.409 degrees (North through East)
! Clean map  min=-0.0019502  max=0.29844 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.211 mas, bmaj=3.975 mas, bpa=2.892 degrees
! Estimated noise=0.540871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.230683 Jy
! Component: 100  -  total flux cleaned = 0.283543 Jy
! Component: 150  -  total flux cleaned = 0.303495 Jy
! Component: 200  -  total flux cleaned = 0.314092 Jy
! Total flux subtracted in 200 components = 0.314092 Jy
! Clean residual min=-0.003437 max=0.005282 Jy/beam
! Clean residual mean=-0.000015 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.314093 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.314093 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.937 mas, bmaj=4.71 mas, bpa=2.409 degrees
! Estimated noise=0.373123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00776272 Jy
! Component: 100  -  total flux cleaned = 0.0122592 Jy
! Component: 150  -  total flux cleaned = 0.0153096 Jy
! Component: 200  -  total flux cleaned = 0.01754 Jy
! Total flux subtracted in 200 components = 0.01754 Jy
! Clean residual min=-0.002207 max=0.001904 Jy/beam
! Clean residual mean=-0.000008 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.331633 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 52 components and 0.331633 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.116 mas, bmaj=8.515 mas, bpa=30.32 degrees
! Estimated noise=0.473742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242946 Jy
! Component: 100  -  total flux cleaned = 0.00374817 Jy
! Component: 150  -  total flux cleaned = 0.00428438 Jy
! Component: 200  -  total flux cleaned = 0.00477523 Jy
! Total flux subtracted in 200 components = 0.00477523 Jy
! Clean residual min=-0.002725 max=0.002073 Jy/beam
! Clean residual mean=-0.000008 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.336408 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348994 Jy
! Component: 100  -  total flux cleaned = 0.000619712 Jy
! Component: 150  -  total flux cleaned = 0.000848178 Jy
! Component: 200  -  total flux cleaned = 0.000995977 Jy
! Total flux subtracted in 200 components = 0.000995977 Jy
! Clean residual min=-0.002642 max=0.002052 Jy/beam
! Clean residual mean=-0.000007 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.337404 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 127 components and 0.337404 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.937 mas, bmaj=4.71 mas, bpa=2.409 degrees
! Estimated noise=0.373123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134633 Jy
! Component: 100  -  total flux cleaned = -0.000319512 Jy
! Component: 150  -  total flux cleaned = -0.000409085 Jy
! Component: 200  -  total flux cleaned = -0.000437404 Jy
! Total flux subtracted in 200 components = -0.000437404 Jy
! Clean residual min=-0.002046 max=0.001882 Jy/beam
! Clean residual mean=-0.000003 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.336966 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 134 components and 0.336966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058853Jy  sigma=1.250043
! Fit after  self-cal, rms=0.058846Jy  sigma=1.249933
wmodel J1058+5628_S_map.mod
! Writing 134 model components to file: J1058+5628_S_map.mod
wobs   J1058+5628_S_uvs.fits
! Writing UV FITS file: J1058+5628_S_uvs.fits
wwins  J1058+5628_S_map.win
! wwins: Wrote 3 windows to J1058+5628_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.94246e-05 Jy
! Component: 100  -  total flux cleaned = 0.000310892 Jy
! Component: 150  -  total flux cleaned = 0.000656156 Jy
! Component: 200  -  total flux cleaned = 0.000866206 Jy
! Component: 250  -  total flux cleaned = 0.000953475 Jy
! Component: 300  -  total flux cleaned = 0.00109487 Jy
! Component: 350  -  total flux cleaned = 0.00123233 Jy
! Component: 400  -  total flux cleaned = 0.00125912 Jy
! Component: 450  -  total flux cleaned = 0.00133822 Jy
! Component: 500  -  total flux cleaned = 0.00136436 Jy
! Component: 550  -  total flux cleaned = 0.00149047 Jy
! Component: 600  -  total flux cleaned = 0.00151477 Jy
! Component: 650  -  total flux cleaned = 0.00151525 Jy
! Component: 700  -  total flux cleaned = 0.00151544 Jy
! Component: 750  -  total flux cleaned = 0.00156303 Jy
! Component: 800  -  total flux cleaned = 0.00153988 Jy
! Component: 850  -  total flux cleaned = 0.00153963 Jy
! Component: 900  -  total flux cleaned = 0.00144959 Jy
! Component: 950  -  total flux cleaned = 0.00149413 Jy
! Component: 1000  -  total flux cleaned = 0.00149415 Jy
! Component: 1050  -  total flux cleaned = 0.00145138 Jy
! Component: 1100  -  total flux cleaned = 0.0014513 Jy
! Component: 1150  -  total flux cleaned = 0.00147229 Jy
! Component: 1200  -  total flux cleaned = 0.00147223 Jy
! Component: 1250  -  total flux cleaned = 0.00149232 Jy
! Component: 1300  -  total flux cleaned = 0.00149207 Jy
! Component: 1350  -  total flux cleaned = 0.00149203 Jy
! Component: 1400  -  total flux cleaned = 0.00149173 Jy
! Component: 1450  -  total flux cleaned = 0.00141319 Jy
! Component: 1500  -  total flux cleaned = 0.00139376 Jy
! Component: 1550  -  total flux cleaned = 0.00141283 Jy
! Component: 1600  -  total flux cleaned = 0.00135608 Jy
! Component: 1650  -  total flux cleaned = 0.00135593 Jy
! Component: 1700  -  total flux cleaned = 0.00124437 Jy
! Component: 1750  -  total flux cleaned = 0.0012445 Jy
! Component: 1800  -  total flux cleaned = 0.00122638 Jy
! Component: 1850  -  total flux cleaned = 0.00117219 Jy
! Component: 1900  -  total flux cleaned = 0.00113639 Jy
! Component: 1950  -  total flux cleaned = 0.00111871 Jy
! Component: 2000  -  total flux cleaned = 0.00110108 Jy
! Component: 2050  -  total flux cleaned = 0.00103174 Jy
! Component: 2100  -  total flux cleaned = 0.00103189 Jy
! Component: 2150  -  total flux cleaned = 0.000963408 Jy
! Component: 2200  -  total flux cleaned = 0.00101377 Jy
! Component: 2250  -  total flux cleaned = 0.000946827 Jy
! Component: 2300  -  total flux cleaned = 0.000863661 Jy
! Component: 2350  -  total flux cleaned = 0.000814323 Jy
! Component: 2400  -  total flux cleaned = 0.000798009 Jy
! Component: 2450  -  total flux cleaned = 0.000717192 Jy
! Component: 2500  -  total flux cleaned = 0.000685151 Jy
! Component: 2550  -  total flux cleaned = 0.000605686 Jy
! Component: 2600  -  total flux cleaned = 0.000621433 Jy
! Component: 2650  -  total flux cleaned = 0.000543075 Jy
! Component: 2700  -  total flux cleaned = 0.000496458 Jy
! Component: 2750  -  total flux cleaned = 0.000419431 Jy
! Component: 2800  -  total flux cleaned = 0.000373518 Jy
! Component: 2850  -  total flux cleaned = 0.000312735 Jy
! Component: 2900  -  total flux cleaned = 0.000252556 Jy
! Component: 2950  -  total flux cleaned = 0.00025244 Jy
! Component: 3000  -  total flux cleaned = 0.000192944 Jy
! Component: 3050  -  total flux cleaned = 0.000133948 Jy
! Component: 3100  -  total flux cleaned = 0.000104763 Jy
! Component: 3150  -  total flux cleaned = 6.1191e-05 Jy
! Component: 3200  -  total flux cleaned = 4.65476e-05 Jy
! Component: 3250  -  total flux cleaned = -1.09784e-05 Jy
! Component: 3300  -  total flux cleaned = -6.80587e-05 Jy
! Component: 3350  -  total flux cleaned = -0.000167194 Jy
! Component: 3400  -  total flux cleaned = -0.000195293 Jy
! Component: 3450  -  total flux cleaned = -0.000223238 Jy
! Component: 3500  -  total flux cleaned = -0.000264801 Jy
! Component: 3550  -  total flux cleaned = -0.000292471 Jy
! Component: 3600  -  total flux cleaned = -0.000319862 Jy
! Component: 3650  -  total flux cleaned = -0.000415148 Jy
! Component: 3700  -  total flux cleaned = -0.000415031 Jy
! Component: 3750  -  total flux cleaned = -0.000428527 Jy
! Component: 3800  -  total flux cleaned = -0.000481931 Jy
! Component: 3850  -  total flux cleaned = -0.000428673 Jy
! Component: 3900  -  total flux cleaned = -0.000481614 Jy
! Component: 3950  -  total flux cleaned = -0.000494659 Jy
! Component: 4000  -  total flux cleaned = -0.000559918 Jy
! Component: 4050  -  total flux cleaned = -0.000585794 Jy
! Total flux subtracted in 4096 components = -0.000547123 Jy
! Clean residual min=-0.000787 max=0.000728 Jy/beam
! Clean residual mean=0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.336419 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 436 components and 0.336419 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1058+5628_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.937 x 4.71 at 2.409 degrees (North through East)
! Clean map  min=-0.0013431  max=0.29885 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1058+5628_S_map.fits
wmodel /vlbi/uf001/uva//J1058+5628_S_map.mod
! Writing 436 model components to file: /vlbi/uf001/uva//J1058+5628_S_map.mod
wobs   /vlbi/uf001/uva//J1058+5628_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1058+5628_S_uvs.fits
wwins  /vlbi/uf001/uva//J1058+5628_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1058+5628_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.29885 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228938 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.229819 0.229819 0.459637 0.919275 1.83855 3.6771 7.3542 14.7084 29.4168 58.8336
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.298 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1305.38 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1058+5628_S_dfm.log closed on Mon Jan 14 01:03:58 2019