! Started logfile: /vlbi/uf001/uvm//J1058+0133_X_b_dfm.log on Sun Jan 13 21:25:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1058+0133_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1058+0133_X_b_uvm.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! AN table 2: 26 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.68435 visibilities/baseline/integration-bin. ! Found source: J1058+0133 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1058+0133_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 115 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=4.559758Jy sigma=21.089165 ! Fit after self-cal, rms=3.507862Jy sigma=16.063601 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6805 mas, bmaj=1.624 mas, bpa=-0.6017 degrees ! Estimated noise=2.62939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05273 Jy ! Component: 100 - total flux cleaned = 3.75859 Jy ! Total flux subtracted in 100 components = 3.75859 Jy ! Clean residual min=-0.153867 max=0.338135 Jy/beam ! Clean residual mean=-0.000043 rms=0.028267 Jy/beam ! Combined flux in latest and established models = 3.75859 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 3.75859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.075769Jy sigma=4.554174 ! Fit after self-cal, rms=1.075132Jy sigma=4.551681 ! Inverting map ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.371421 Jy ! Component: 100 - total flux cleaned = 0.596989 Jy ! Total flux subtracted in 100 components = 0.596989 Jy ! Clean residual min=-0.108018 max=0.197876 Jy/beam ! Clean residual mean=-0.000033 rms=0.020464 Jy/beam ! Combined flux in latest and established models = 4.35558 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 4.35558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.741680Jy sigma=3.222485 ! Fit after self-cal, rms=0.734573Jy sigma=3.185429 ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192894 Jy ! Component: 100 - total flux cleaned = 0.317771 Jy ! Total flux subtracted in 100 components = 0.317771 Jy ! Clean residual min=-0.090152 max=0.141342 Jy/beam ! Clean residual mean=-0.000027 rms=0.017290 Jy/beam ! Combined flux in latest and established models = 4.67335 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 4.67335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.603879Jy sigma=2.685984 ! Fit after self-cal, rms=0.600692Jy sigma=2.662624 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121677 Jy ! Component: 100 - total flux cleaned = 0.208968 Jy ! Total flux subtracted in 100 components = 0.208968 Jy ! Clean residual min=-0.085338 max=0.101372 Jy/beam ! Clean residual mean=-0.000023 rms=0.015761 Jy/beam ! Combined flux in latest and established models = 4.88232 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 4.88232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.532932Jy sigma=2.410807 ! Fit after self-cal, rms=0.531754Jy sigma=2.407312 ! Inverting map ! Added new window around map position (-5.2, 12.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957711 Jy ! Component: 100 - total flux cleaned = 0.162029 Jy ! Total flux subtracted in 100 components = 0.162029 Jy ! Clean residual min=-0.075563 max=0.087077 Jy/beam ! Clean residual mean=-0.000023 rms=0.014833 Jy/beam ! Combined flux in latest and established models = 5.04434 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 5.04435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.498705Jy sigma=2.271703 ! Fit after self-cal, rms=0.495717Jy sigma=2.262376 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9227 mas, bmaj=2.157 mas, bpa=-3.324 degrees ! Estimated noise=1.88385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140783 Jy ! Component: 100 - total flux cleaned = 0.236938 Jy ! Component: 150 - total flux cleaned = 0.30703 Jy ! Component: 200 - total flux cleaned = 0.331642 Jy ! Total flux subtracted in 200 components = 0.331642 Jy ! Clean residual min=-0.102471 max=0.135244 Jy/beam ! Clean residual mean=-0.000086 rms=0.024132 Jy/beam ! Combined flux in latest and established models = 5.37599 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 72 components and 5.37599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.428345Jy sigma=2.051580 ! Fit after self-cal, rms=0.427949Jy sigma=2.049761 ! Inverting map ! Added new window around map position (-6.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138117 Jy ! Component: 100 - total flux cleaned = 0.226833 Jy ! Component: 150 - total flux cleaned = 0.293512 Jy ! Component: 200 - total flux cleaned = 0.34965 Jy ! Total flux subtracted in 200 components = 0.34965 Jy ! Clean residual min=-0.087237 max=0.085834 Jy/beam ! Clean residual mean=-0.000064 rms=0.019880 Jy/beam ! Combined flux in latest and established models = 5.72564 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 100 components and 5.72564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.361730Jy sigma=1.791500 ! Fit after self-cal, rms=0.357611Jy sigma=1.774084 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9227 x 2.157 at -3.324 degrees (North through East) ! Clean map min=-0.083603 max=4.1296 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.04 KP 1.01 ! LA 1.02 MK 1.04 NL 1.05 OV 0.96 ! PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.01 KP 1.00 LA 1.01 ! NL 1.03 OV 0.93 PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.02 KP 1.02 ! LA 1.03 MK 1.04 NL 1.04 OV 0.95 ! PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.01 KP 1.01 LA 1.00 ! NL 1.03 OV 0.93 PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.02 KP 1.01 ! LA 1.03 MK 1.01 NL 1.07 OV 0.96 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.02 KP 0.99 LA 1.01 ! NL 1.04 OV 0.93 PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.05 KP 1.01 ! LA 1.02 MK 1.02 NL 1.08 OV 0.94 ! PT 0.95 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.00 KP 1.02 LA 1.00 ! NL 1.04 OV 0.94 PT 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.03 KP 1.01 ! LA 1.03 MK 1.03 NL 1.04 OV 0.94 ! PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.01 KP 1.01 LA 1.02 ! NL 1.05 OV 0.93 PT 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.03 KP 1.01 ! LA 1.03 MK 1.02 NL 1.05 OV 0.94 ! PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.02 KP 1.00 LA 1.01 ! NL 1.05 OV 0.92 PT 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.03 KP 1.00 ! LA 1.03 MK 1.00 NL 1.07 OV 0.94 ! PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.02 KP 1.00 LA 1.00 ! NL 1.06 OV 0.92 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.03 KP 1.00 ! LA 1.02 MK 1.02 NL 1.03 OV 0.95 ! PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.04 KP 0.99 LA 1.01 ! NL 1.06 OV 0.92 PT 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.01 KP 1.01 ! LA 1.02 MK 1.02 NL 1.05 OV 0.95 ! PT 0.94 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.03 KP 0.99 LA 1.00 ! NL 1.08 OV 0.92 PT 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.03 KP 1.02 ! LA 1.01 MK 0.99 NL 1.07 OV 0.94 ! PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.03 KP 1.00 LA 1.01 ! NL 1.06 OV 0.92 PT 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.04 KP 1.00 ! LA 1.02 MK 1.02 NL 1.04 OV 0.95 ! PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.03 KP 0.99 LA 0.99 ! NL 1.07 OV 0.91 PT 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.03 KP 1.00 ! LA 1.02 MK 1.03 NL 1.04 OV 0.93 ! PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.04 KP 0.99 LA 1.01 ! NL 1.04 OV 0.92 PT 0.93 ! ! ! Fit before self-cal, rms=0.357611Jy sigma=1.774084 ! Fit after self-cal, rms=0.293180Jy sigma=1.343693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9284 mas, bmaj=2.175 mas, bpa=-3.012 degrees ! Estimated noise=1.88731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00905493 Jy ! Component: 100 - total flux cleaned = -0.0133351 Jy ! Component: 150 - total flux cleaned = -0.0182097 Jy ! Component: 200 - total flux cleaned = -0.0206268 Jy ! Total flux subtracted in 200 components = -0.0206268 Jy ! Clean residual min=-0.054916 max=0.062378 Jy/beam ! Clean residual mean=-0.000028 rms=0.012328 Jy/beam ! Combined flux in latest and established models = 5.70501 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 5.70501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.266185Jy sigma=1.229804 ! Fit after self-cal, rms=0.264822Jy sigma=1.222323 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.264822Jy sigma=1.222323 ! Fit after self-cal, rms=0.212908Jy sigma=0.942430 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.178 mas, bpa=-3.064 degrees ! Estimated noise=1.88254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00856623 Jy ! Component: 100 - total flux cleaned = -0.0161629 Jy ! Component: 150 - total flux cleaned = -0.0215474 Jy ! Component: 200 - total flux cleaned = -0.0253174 Jy ! Total flux subtracted in 200 components = -0.0253174 Jy ! Clean residual min=-0.036307 max=0.040061 Jy/beam ! Clean residual mean=-0.000009 rms=0.008276 Jy/beam ! Combined flux in latest and established models = 5.67969 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 5.67969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198133Jy sigma=0.877751 ! Fit after self-cal, rms=0.197816Jy sigma=0.874851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383833 Jy ! Component: 100 - total flux cleaned = 0.0446767 Jy ! Component: 150 - total flux cleaned = 0.0438817 Jy ! Component: 200 - total flux cleaned = 0.0395158 Jy ! Total flux subtracted in 200 components = 0.0395158 Jy ! Clean residual min=-0.031096 max=0.031732 Jy/beam ! Clean residual mean=-0.000007 rms=0.007551 Jy/beam ! Combined flux in latest and established models = 5.71921 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 162 components and 5.71921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186714Jy sigma=0.827833 ! Fit after self-cal, rms=0.186021Jy sigma=0.824615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186021Jy sigma=0.824615 ! Fit after self-cal, rms=0.170382Jy sigma=0.744987 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9239 mas, bmaj=2.18 mas, bpa=-3.1 degrees ! Estimated noise=1.88034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0144228 Jy ! Component: 100 - total flux cleaned = -0.018242 Jy ! Component: 150 - total flux cleaned = -0.0215215 Jy ! Component: 200 - total flux cleaned = -0.0229159 Jy ! Total flux subtracted in 200 components = -0.0229159 Jy ! Clean residual min=-0.027257 max=0.025266 Jy/beam ! Clean residual mean=-0.000007 rms=0.006129 Jy/beam ! Combined flux in latest and established models = 5.69629 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 173 components and 5.69629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160580Jy sigma=0.701268 ! Fit after self-cal, rms=0.160294Jy sigma=0.700005 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941445 Jy ! Component: 100 - total flux cleaned = -0.00152591 Jy ! Component: 150 - total flux cleaned = -0.00442537 Jy ! Component: 200 - total flux cleaned = -0.00764978 Jy ! Total flux subtracted in 200 components = -0.00764978 Jy ! Clean residual min=-0.025311 max=0.023792 Jy/beam ! Clean residual mean=-0.000007 rms=0.005898 Jy/beam ! Combined flux in latest and established models = 5.68864 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 180 components and 5.68864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156026Jy sigma=0.681358 ! Fit after self-cal, rms=0.155886Jy sigma=0.680818 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155886Jy sigma=0.680818 ! Fit after self-cal, rms=0.151646Jy sigma=0.665153 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=3.65 mas, bpa=-7.707 degrees ! Estimated noise=2.56139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0265201 Jy ! Component: 100 - total flux cleaned = -0.032524 Jy ! Component: 150 - total flux cleaned = -0.0373728 Jy ! Component: 200 - total flux cleaned = -0.0410783 Jy ! Total flux subtracted in 200 components = -0.0410783 Jy ! Clean residual min=-0.029667 max=0.030406 Jy/beam ! Clean residual mean=-0.000016 rms=0.008787 Jy/beam ! Combined flux in latest and established models = 5.64756 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 202 components and 5.64756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146857Jy sigma=0.652730 ! Fit after self-cal, rms=0.146629Jy sigma=0.650940 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321092 Jy ! Component: 100 - total flux cleaned = -0.00543681 Jy ! Component: 150 - total flux cleaned = -0.00822695 Jy ! Component: 200 - total flux cleaned = -0.0103653 Jy ! Total flux subtracted in 200 components = -0.0103653 Jy ! Clean residual min=-0.028042 max=0.028816 Jy/beam ! Clean residual mean=-0.000016 rms=0.008563 Jy/beam ! Combined flux in latest and established models = 5.6372 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 209 components and 5.6372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145046Jy sigma=0.646322 ! Fit after self-cal, rms=0.144999Jy sigma=0.645592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9229 mas, bmaj=2.181 mas, bpa=-3.127 degrees ! Estimated noise=1.87851 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9229 x 2.181 at -3.127 degrees (North through East) ! Clean map min=-0.034965 max=4.144 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144999Jy sigma=0.645592 ! Fit after self-cal, rms=0.131880Jy sigma=0.576045 ! Inverting map and beam ! Estimated beam: bmin=0.9236 mas, bmaj=2.184 mas, bpa=-3.138 degrees ! Estimated noise=1.88003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108543 Jy ! Component: 100 - total flux cleaned = -0.0121001 Jy ! Component: 150 - total flux cleaned = -0.0131516 Jy ! Component: 200 - total flux cleaned = -0.0145855 Jy ! Total flux subtracted in 200 components = -0.0145855 Jy ! Clean residual min=-0.019647 max=0.019057 Jy/beam ! Clean residual mean=-0.000007 rms=0.004456 Jy/beam ! Combined flux in latest and established models = 5.62261 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 216 components and 5.62261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126504Jy sigma=0.546819 ! Fit after self-cal, rms=0.126341Jy sigma=0.546379 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001291 Jy ! Component: 100 - total flux cleaned = -0.0021337 Jy ! Component: 150 - total flux cleaned = -0.00291377 Jy ! Component: 200 - total flux cleaned = -0.00328539 Jy ! Total flux subtracted in 200 components = -0.00328539 Jy ! Clean residual min=-0.019323 max=0.018034 Jy/beam ! Clean residual mean=-0.000007 rms=0.004365 Jy/beam ! Combined flux in latest and established models = 5.61933 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 223 components and 5.61933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124049Jy sigma=0.534666 ! Fit after self-cal, rms=0.123934Jy sigma=0.534463 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123934Jy sigma=0.534463 ! Fit after self-cal, rms=0.120786Jy sigma=0.525112 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.68 mas, bmaj=1.638 mas, bpa=-0.3178 degrees ! Estimated noise=2.64951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07368 Jy ! Component: 100 - total flux cleaned = 3.81775 Jy ! Component: 150 - total flux cleaned = 4.20159 Jy ! Component: 200 - total flux cleaned = 4.42973 Jy ! Total flux subtracted in 200 components = 4.42973 Jy ! Clean residual min=-0.053681 max=0.119848 Jy/beam ! Clean residual mean=-0.000019 rms=0.011967 Jy/beam ! Combined flux in latest and established models = 4.42973 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 4.42973 Jy ! Inverting map and beam ! Estimated beam: bmin=0.923 mas, bmaj=2.185 mas, bpa=-3.15 degrees ! Estimated noise=1.87872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273801 Jy ! Component: 100 - total flux cleaned = 0.436493 Jy ! Component: 150 - total flux cleaned = 0.557293 Jy ! Component: 200 - total flux cleaned = 0.652175 Jy ! Total flux subtracted in 200 components = 0.652175 Jy ! Clean residual min=-0.049126 max=0.056825 Jy/beam ! Clean residual mean=-0.000053 rms=0.012306 Jy/beam ! Combined flux in latest and established models = 5.0819 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 57 components and 5.0819 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765911 Jy ! Component: 100 - total flux cleaned = 0.139814 Jy ! Component: 150 - total flux cleaned = 0.193542 Jy ! Component: 200 - total flux cleaned = 0.239542 Jy ! Total flux subtracted in 200 components = 0.239542 Jy ! Clean residual min=-0.037290 max=0.040427 Jy/beam ! Clean residual mean=-0.000033 rms=0.007745 Jy/beam ! Combined flux in latest and established models = 5.32144 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 97 components and 5.32145 Jy ! Inverting map ! Added new window around map position (-8, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429237 Jy ! Component: 100 - total flux cleaned = 0.0780127 Jy ! Component: 150 - total flux cleaned = 0.108701 Jy ! Component: 200 - total flux cleaned = 0.135864 Jy ! Total flux subtracted in 200 components = 0.135864 Jy ! Clean residual min=-0.029139 max=0.027121 Jy/beam ! Clean residual mean=-0.000021 rms=0.005655 Jy/beam ! Combined flux in latest and established models = 5.45731 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 131 components and 5.45731 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=3.655 mas, bpa=-7.64 degrees ! Estimated noise=2.56122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410537 Jy ! Component: 100 - total flux cleaned = 0.0704742 Jy ! Component: 150 - total flux cleaned = 0.0880409 Jy ! Component: 200 - total flux cleaned = 0.10265 Jy ! Total flux subtracted in 200 components = 0.10265 Jy ! Clean residual min=-0.026828 max=0.029686 Jy/beam ! Clean residual mean=-0.000026 rms=0.007430 Jy/beam ! Combined flux in latest and established models = 5.55996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108847 Jy ! Component: 100 - total flux cleaned = 0.0189426 Jy ! Component: 150 - total flux cleaned = 0.0264193 Jy ! Component: 200 - total flux cleaned = 0.0323942 Jy ! Total flux subtracted in 200 components = 0.0323942 Jy ! Clean residual min=-0.021367 max=0.025426 Jy/beam ! Clean residual mean=-0.000016 rms=0.006622 Jy/beam ! Combined flux in latest and established models = 5.59235 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 202 components and 5.59235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.923 mas, bmaj=2.185 mas, bpa=-3.15 degrees ! Estimated noise=1.87872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148034 Jy ! Component: 100 - total flux cleaned = 0.0184546 Jy ! Component: 150 - total flux cleaned = 0.0209669 Jy ! Component: 200 - total flux cleaned = 0.0233188 Jy ! Total flux subtracted in 200 components = 0.0233188 Jy ! Clean residual min=-0.020375 max=0.017581 Jy/beam ! Clean residual mean=-0.000007 rms=0.003919 Jy/beam ! Combined flux in latest and established models = 5.61567 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 220 components and 5.61567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114015Jy sigma=0.505510 ! Fit after self-cal, rms=0.112183Jy sigma=0.493307 wmodel J1058+0133_X_b_map.mod ! Writing 220 model components to file: J1058+0133_X_b_map.mod wobs J1058+0133_X_b_uvs.fits ! Writing UV FITS file: J1058+0133_X_b_uvs.fits wwins J1058+0133_X_b_map.win ! wwins: Wrote 8 windows to J1058+0133_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00395746 Jy ! Component: 100 - total flux cleaned = -0.00512871 Jy ! Component: 150 - total flux cleaned = -0.00430555 Jy ! Component: 200 - total flux cleaned = -0.00275936 Jy ! Component: 250 - total flux cleaned = -0.00127916 Jy ! Component: 300 - total flux cleaned = -0.000333517 Jy ! Component: 350 - total flux cleaned = 0.00126875 Jy ! Component: 400 - total flux cleaned = 0.00148733 Jy ! Component: 450 - total flux cleaned = 0.00235978 Jy ! Component: 500 - total flux cleaned = 0.0025721 Jy ! Component: 550 - total flux cleaned = 0.00216327 Jy ! Component: 600 - total flux cleaned = 0.00236771 Jy ! Component: 650 - total flux cleaned = 0.00236804 Jy ! Component: 700 - total flux cleaned = 0.00217773 Jy ! Component: 750 - total flux cleaned = 0.00255401 Jy ! Component: 800 - total flux cleaned = 0.00218582 Jy ! Component: 850 - total flux cleaned = 0.00236749 Jy ! Component: 900 - total flux cleaned = 0.00236621 Jy ! Component: 950 - total flux cleaned = 0.00219119 Jy ! Component: 1000 - total flux cleaned = 0.00236588 Jy ! Component: 1050 - total flux cleaned = 0.00253207 Jy ! Component: 1100 - total flux cleaned = 0.00219758 Jy ! Component: 1150 - total flux cleaned = 0.00187232 Jy ! Component: 1200 - total flux cleaned = 0.00219605 Jy ! Component: 1250 - total flux cleaned = 0.00139797 Jy ! Component: 1300 - total flux cleaned = 0.00155817 Jy ! Component: 1350 - total flux cleaned = 0.00124818 Jy ! Component: 1400 - total flux cleaned = 0.00140332 Jy ! Component: 1450 - total flux cleaned = 0.00110465 Jy ! Component: 1500 - total flux cleaned = 0.000955829 Jy ! Component: 1550 - total flux cleaned = 0.000661239 Jy ! Component: 1600 - total flux cleaned = 8.04826e-05 Jy ! Component: 1650 - total flux cleaned = -0.000630819 Jy ! Component: 1700 - total flux cleaned = -0.000767481 Jy ! Component: 1750 - total flux cleaned = -0.00090665 Jy ! Component: 1800 - total flux cleaned = -0.00173304 Jy ! Component: 1850 - total flux cleaned = -0.00173578 Jy ! Component: 1900 - total flux cleaned = -0.00241003 Jy ! Component: 1950 - total flux cleaned = -0.00267486 Jy ! Component: 2000 - total flux cleaned = -0.00294011 Jy ! Component: 2050 - total flux cleaned = -0.00345831 Jy ! Component: 2100 - total flux cleaned = -0.00409969 Jy ! Component: 2150 - total flux cleaned = -0.00422792 Jy ! Component: 2200 - total flux cleaned = -0.00435501 Jy ! Component: 2250 - total flux cleaned = -0.0052245 Jy ! Component: 2300 - total flux cleaned = -0.00485536 Jy ! Component: 2350 - total flux cleaned = -0.00546561 Jy ! Component: 2400 - total flux cleaned = -0.0054657 Jy ! Component: 2450 - total flux cleaned = -0.00570334 Jy ! Component: 2500 - total flux cleaned = -0.00558397 Jy ! Component: 2550 - total flux cleaned = -0.00546885 Jy ! Component: 2600 - total flux cleaned = -0.00593069 Jy ! Component: 2650 - total flux cleaned = -0.00581563 Jy ! Component: 2700 - total flux cleaned = -0.00581655 Jy ! Component: 2750 - total flux cleaned = -0.00570403 Jy ! Component: 2800 - total flux cleaned = -0.00581469 Jy ! Component: 2850 - total flux cleaned = -0.00570566 Jy ! Component: 2900 - total flux cleaned = -0.00614127 Jy ! Component: 2950 - total flux cleaned = -0.00614181 Jy ! Component: 3000 - total flux cleaned = -0.00667562 Jy ! Component: 3050 - total flux cleaned = -0.00657087 Jy ! Component: 3100 - total flux cleaned = -0.00678035 Jy ! Component: 3150 - total flux cleaned = -0.00688425 Jy ! Component: 3200 - total flux cleaned = -0.0070914 Jy ! Component: 3250 - total flux cleaned = -0.00699026 Jy ! Component: 3300 - total flux cleaned = -0.00719423 Jy ! Component: 3350 - total flux cleaned = -0.00759592 Jy ! Component: 3400 - total flux cleaned = -0.00759638 Jy ! Component: 3450 - total flux cleaned = -0.00808948 Jy ! Component: 3500 - total flux cleaned = -0.00799166 Jy ! Component: 3550 - total flux cleaned = -0.0082811 Jy ! Component: 3600 - total flux cleaned = -0.00885668 Jy ! Component: 3650 - total flux cleaned = -0.00895206 Jy ! Component: 3700 - total flux cleaned = -0.00904696 Jy ! Component: 3750 - total flux cleaned = -0.00923277 Jy ! Component: 3800 - total flux cleaned = -0.00978831 Jy ! Component: 3850 - total flux cleaned = -0.00978851 Jy ! Component: 3900 - total flux cleaned = -0.0101532 Jy ! Component: 3950 - total flux cleaned = -0.0106052 Jy ! Component: 4000 - total flux cleaned = -0.0106039 Jy ! Component: 4050 - total flux cleaned = -0.0104256 Jy ! Total flux subtracted in 4096 components = -0.0107794 Jy ! Clean residual min=-0.004399 max=0.004973 Jy/beam ! Clean residual mean=-0.000002 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 5.60489 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 522 components and 5.60489 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1058+0133_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.923 x 2.185 at -3.15 degrees (North through East) ! Clean map min=-0.019753 max=4.1874 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1058+0133_X_b_map.fits wmodel /vlbi/uf001/uvm//J1058+0133_X_b_map.mod ! Writing 522 model components to file: /vlbi/uf001/uvm//J1058+0133_X_b_map.mod wobs /vlbi/uf001/uvm//J1058+0133_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1058+0133_X_b_uvs.fits wwins /vlbi/uf001/uvm//J1058+0133_X_b_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1058+0133_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.18741 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00158381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.11347 0.11347 0.226939 0.453879 0.907758 1.81552 3.63103 7.26206 14.5241 29.0483 58.0965 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.187 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2643.88 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1058+0133_X_b_dfm.log closed on Sun Jan 13 21:25:41 2019