! Started logfile: /vlbi/uf001/uvm//J1054+8629_X_a_dfm.log on Sun Jan 13 21:25:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1054+8629_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1054+8629_X_a_uvm.fits ! AN table 1: 171 integrations on 45 of 45 possible baselines. ! AN table 2: 110 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.952019 visibilities/baseline/integration-bin. ! Found source: J1054+8629 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 123096 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1054+8629_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002740Jy sigma=21.980495 ! Fit after self-cal, rms=0.965651Jy sigma=21.175677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7413 mas, bmaj=0.8417 mas, bpa=49.17 degrees ! Estimated noise=0.246845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245912 Jy ! Component: 100 - total flux cleaned = 0.0303907 Jy ! Total flux subtracted in 100 components = 0.0303907 Jy ! Clean residual min=-0.002413 max=0.003991 Jy/beam ! Clean residual mean=0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0303907 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0303907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065630Jy sigma=1.320446 ! Fit after self-cal, rms=0.064177Jy sigma=1.287339 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474443 Jy ! Component: 100 - total flux cleaned = 0.00732761 Jy ! Total flux subtracted in 100 components = 0.00732761 Jy ! Clean residual min=-0.002195 max=0.004531 Jy/beam ! Clean residual mean=0.000000 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0377183 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.0377183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063427Jy sigma=1.270341 ! Fit after self-cal, rms=0.063425Jy sigma=1.269916 ! Inverting map ! Added new window around map position (-1, 5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410207 Jy ! Component: 100 - total flux cleaned = 0.00620002 Jy ! Total flux subtracted in 100 components = 0.00620002 Jy ! Clean residual min=-0.002146 max=0.003573 Jy/beam ! Clean residual mean=0.000000 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0439183 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0439184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062965Jy sigma=1.258174 ! Fit after self-cal, rms=0.062855Jy sigma=1.255472 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299509 Jy ! Component: 100 - total flux cleaned = 0.00465147 Jy ! Total flux subtracted in 100 components = 0.00465147 Jy ! Clean residual min=-0.002153 max=0.002961 Jy/beam ! Clean residual mean=0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0485698 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0485698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062562Jy sigma=1.248099 ! Fit after self-cal, rms=0.062493Jy sigma=1.246476 ! Inverting map ! Added new window around map position (-2.6, 6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293963 Jy ! Component: 100 - total flux cleaned = 0.00498958 Jy ! Total flux subtracted in 100 components = 0.00498958 Jy ! Clean residual min=-0.002126 max=0.002515 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0535594 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.0535594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062205Jy sigma=1.239435 ! Fit after self-cal, rms=0.062123Jy sigma=1.237923 ! Inverting map ! Added new window around map position (-1.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027652 Jy ! Component: 100 - total flux cleaned = 0.00487162 Jy ! Total flux subtracted in 100 components = 0.00487162 Jy ! Clean residual min=-0.002075 max=0.002062 Jy/beam ! Clean residual mean=0.000000 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.058431 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.058431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061849Jy sigma=1.231357 ! Fit after self-cal, rms=0.061799Jy sigma=1.230532 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.178 mas, bpa=46.91 degrees ! Estimated noise=0.0946495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483146 Jy ! Component: 100 - total flux cleaned = 0.0083059 Jy ! Component: 150 - total flux cleaned = 0.0109491 Jy ! Component: 200 - total flux cleaned = 0.013039 Jy ! Total flux subtracted in 200 components = 0.013039 Jy ! Clean residual min=-0.001602 max=0.002438 Jy/beam ! Clean residual mean=0.000002 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.07147 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 84 components and 0.07147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061286Jy sigma=1.218407 ! Fit after self-cal, rms=0.061106Jy sigma=1.214930 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312482 Jy ! Component: 100 - total flux cleaned = 0.00531555 Jy ! Component: 150 - total flux cleaned = 0.00697619 Jy ! Component: 200 - total flux cleaned = 0.00825143 Jy ! Total flux subtracted in 200 components = 0.00825143 Jy ! Clean residual min=-0.001570 max=0.001794 Jy/beam ! Clean residual mean=0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0797215 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 98 components and 0.0797215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060890Jy sigma=1.210090 ! Fit after self-cal, rms=0.060812Jy sigma=1.208590 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.178 at 46.91 degrees (North through East) ! Clean map min=-0.0016218 max=0.034973 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00 HN 1.10 KP 1.06 ! LA 1.04 MK 1.08 NL 1.16 OV 0.95 ! PT 0.82 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.93 HN 1.01 KP 0.98 ! LA 1.02 MK 1.04 NL 1.13 OV 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.95 HN 1.03 KP 1.06 ! LA 1.06 MK 1.11 NL 1.21 OV 0.97 ! PT 0.85 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 0.96 HN 0.96 KP 1.03 ! LA 0.99 MK 0.94 NL 1.16 OV 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.99 HN 1.03 KP 1.09 ! LA 1.05 MK 1.07 NL 1.18 OV 0.95 ! PT 0.82 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.01 HN 0.96 KP 1.04 ! LA 0.90 MK 0.94 NL 1.16 OV 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.99 HN 1.09 KP 1.13 ! LA 1.04 MK 1.09 NL 1.19 OV 0.93 ! PT 0.84 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.99 HN 1.04 KP 1.03 ! LA 0.98 MK 1.04 NL 1.08 OV 0.86 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.96 HN 1.09 KP 1.06 ! LA 1.08 MK 1.02 NL 1.20 OV 0.94 ! PT 0.82 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.98 HN 0.98 KP 1.14 ! LA 0.93 MK 1.00 NL 1.05 OV 0.83 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00 HN 1.03 KP 1.08 ! LA 1.05 MK 1.08 NL 1.18 OV 0.96 ! PT 0.84 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 1.01 HN 0.93 KP 1.07 ! LA 1.01 MK 0.96 NL 1.02 OV 0.87 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.98 HN 1.03 KP 1.10 ! LA 1.03 MK 1.03 NL 1.20 OV 0.93 ! PT 0.82 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 FD 0.94 HN 0.94 KP 1.05 ! LA 0.99 MK 1.07 NL 1.07 OV 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.94 HN 1.00 KP 1.05 ! LA 1.05 MK 1.07 NL 1.24 OV 0.95 ! PT 0.87 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 FD 1.00 HN 0.97 KP 1.03 ! LA 0.96 MK 1.06 NL 1.10 OV 0.85 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 0.97 KP 1.12 ! LA 1.08 MK 1.00 NL 1.17 OV 0.94 ! PT 0.81 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.93 HN 0.91 KP 1.01 ! LA 0.96 MK 1.00 NL 1.04 OV 0.87 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 1.04 KP 1.08 ! LA 0.99 MK 0.93 NL 1.15 OV 0.97 ! PT 0.81 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 FD 0.90 HN 0.92 KP 0.98 ! LA 1.00 MK 1.08 NL 1.14 OV 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.96 KP 1.07 ! LA 1.03 MK 0.93 NL 1.19 OV 0.94 ! PT 0.78 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.74 FD 0.94 HN 0.92 KP 0.99 ! LA 0.96 MK 0.96 NL 1.06 OV 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.03 KP 1.02 ! LA 1.03 MK 0.89 NL 1.11 OV 0.92 ! PT 0.86 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.71 FD 0.94 HN 0.96 KP 1.03 ! LA 0.99 MK 0.86 NL 0.99 OV 0.87 ! ! ! Fit before self-cal, rms=0.060812Jy sigma=1.208590 ! Fit after self-cal, rms=0.059814Jy sigma=1.199850 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.188 mas, bpa=45.71 degrees ! Estimated noise=0.0951453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012409 Jy ! Component: 100 - total flux cleaned = 0.00163106 Jy ! Component: 150 - total flux cleaned = 0.00181454 Jy ! Component: 200 - total flux cleaned = 0.00188478 Jy ! Total flux subtracted in 200 components = 0.00188478 Jy ! Clean residual min=-0.001075 max=0.001022 Jy/beam ! Clean residual mean=0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0816063 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.0816063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059766Jy sigma=1.198843 ! Fit after self-cal, rms=0.059818Jy sigma=1.197018 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059818Jy sigma=1.197018 ! Fit after self-cal, rms=0.060147Jy sigma=1.192291 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=1.174 mas, bpa=46.41 degrees ! Estimated noise=0.0954486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057834 Jy ! Component: 100 - total flux cleaned = 0.000703431 Jy ! Component: 150 - total flux cleaned = 0.000773718 Jy ! Component: 200 - total flux cleaned = 0.00079135 Jy ! Total flux subtracted in 200 components = 0.00079135 Jy ! Clean residual min=-0.000766 max=0.000912 Jy/beam ! Clean residual mean=0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0823976 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.0823976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060118Jy sigma=1.191727 ! Fit after self-cal, rms=0.060174Jy sigma=1.190576 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.2, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749735 Jy ! Component: 100 - total flux cleaned = 0.00100775 Jy ! Component: 150 - total flux cleaned = 0.00123932 Jy ! Component: 200 - total flux cleaned = 0.00135798 Jy ! Total flux subtracted in 200 components = 0.00135798 Jy ! Clean residual min=-0.000731 max=0.000677 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0837556 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.0837556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060150Jy sigma=1.190055 ! Fit after self-cal, rms=0.060140Jy sigma=1.189832 ! Inverting map ! Added new window around map position (-2.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779102 Jy ! Component: 100 - total flux cleaned = 0.00101391 Jy ! Component: 150 - total flux cleaned = 0.00116387 Jy ! Component: 200 - total flux cleaned = 0.00121828 Jy ! Total flux subtracted in 200 components = 0.00121828 Jy ! Clean residual min=-0.000718 max=0.000652 Jy/beam ! Clean residual mean=0.000001 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0849739 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 134 components and 0.0849739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060121Jy sigma=1.189409 ! Fit after self-cal, rms=0.060108Jy sigma=1.189173 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060108Jy sigma=1.189173 ! Fit after self-cal, rms=0.060032Jy sigma=1.188858 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.053 mas, bmaj=1.169 mas, bpa=46.43 degrees ! Estimated noise=0.0945602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420694 Jy ! Component: 100 - total flux cleaned = 0.00074453 Jy ! Component: 150 - total flux cleaned = 0.000890633 Jy ! Component: 200 - total flux cleaned = 0.000943905 Jy ! Total flux subtracted in 200 components = 0.000943905 Jy ! Clean residual min=-0.000624 max=0.000591 Jy/beam ! Clean residual mean=0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0859178 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 143 components and 0.0859178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060014Jy sigma=1.188478 ! Fit after self-cal, rms=0.060031Jy sigma=1.188130 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237385 Jy ! Component: 100 - total flux cleaned = 0.000363989 Jy ! Component: 150 - total flux cleaned = 0.000436833 Jy ! Component: 200 - total flux cleaned = 0.000501432 Jy ! Total flux subtracted in 200 components = 0.000501432 Jy ! Clean residual min=-0.000608 max=0.000604 Jy/beam ! Clean residual mean=0.000001 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0864192 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 147 components and 0.0864192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060018Jy sigma=1.187863 ! Fit after self-cal, rms=0.060012Jy sigma=1.187762 ! Inverting map ! Added new window around map position (9, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049811 Jy ! Component: 100 - total flux cleaned = 0.000672817 Jy ! Component: 150 - total flux cleaned = 0.000775597 Jy ! Component: 200 - total flux cleaned = 0.000851895 Jy ! Total flux subtracted in 200 components = 0.000851895 Jy ! Clean residual min=-0.000630 max=0.000583 Jy/beam ! Clean residual mean=0.000001 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.0872711 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 155 components and 0.0872711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060001Jy sigma=1.187504 ! Fit after self-cal, rms=0.059996Jy sigma=1.187382 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059996Jy sigma=1.187382 ! Fit after self-cal, rms=0.059771Jy sigma=1.187261 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=2.582 mas, bpa=26.88 degrees ! Estimated noise=0.121053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304921 Jy ! Component: 100 - total flux cleaned = 0.000476691 Jy ! Component: 150 - total flux cleaned = 0.000632005 Jy ! Component: 200 - total flux cleaned = 0.000724656 Jy ! Total flux subtracted in 200 components = 0.000724656 Jy ! Clean residual min=-0.000769 max=0.000730 Jy/beam ! Clean residual mean=0.000003 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.0879958 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 182 components and 0.0879958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059762Jy sigma=1.187083 ! Fit after self-cal, rms=0.059770Jy sigma=1.186885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4288e-05 Jy ! Component: 100 - total flux cleaned = 9.05444e-05 Jy ! Component: 150 - total flux cleaned = 0.000201485 Jy ! Component: 200 - total flux cleaned = 0.000251351 Jy ! Total flux subtracted in 200 components = 0.000251351 Jy ! Clean residual min=-0.000744 max=0.000721 Jy/beam ! Clean residual mean=0.000003 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.0882471 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 189 components and 0.0882471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059765Jy sigma=1.186786 ! Fit after self-cal, rms=0.059759Jy sigma=1.186627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.164 mas, bpa=46.05 degrees ! Estimated noise=0.0938447 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 1.164 at 46.05 degrees (North through East) ! Clean map min=-0.00051311 max=0.032306 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7469 mas, bmaj=0.8273 mas, bpa=49.79 degrees ! Estimated noise=0.244682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258839 Jy ! Component: 100 - total flux cleaned = 0.0369916 Jy ! Component: 150 - total flux cleaned = 0.0439397 Jy ! Component: 200 - total flux cleaned = 0.0491849 Jy ! Total flux subtracted in 200 components = 0.0491849 Jy ! Clean residual min=-0.002112 max=0.003259 Jy/beam ! Clean residual mean=-0.000000 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0491849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0491849 Jy ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.164 mas, bpa=46.05 degrees ! Estimated noise=0.0938447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843907 Jy ! Component: 100 - total flux cleaned = 0.0141312 Jy ! Component: 150 - total flux cleaned = 0.0184355 Jy ! Component: 200 - total flux cleaned = 0.0218021 Jy ! Total flux subtracted in 200 components = 0.0218021 Jy ! Clean residual min=-0.001136 max=0.002000 Jy/beam ! Clean residual mean=0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.070987 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 68 components and 0.070987 Jy ! Inverting map ! Added new window around map position (0, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268846 Jy ! Component: 100 - total flux cleaned = 0.00486497 Jy ! Component: 150 - total flux cleaned = 0.00666042 Jy ! Component: 200 - total flux cleaned = 0.00817376 Jy ! Total flux subtracted in 200 components = 0.00817376 Jy ! Clean residual min=-0.000791 max=0.000928 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0791607 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 101 components and 0.0791607 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012781 Jy ! Component: 100 - total flux cleaned = 0.00236067 Jy ! Component: 150 - total flux cleaned = 0.00329042 Jy ! Component: 200 - total flux cleaned = 0.00409756 Jy ! Total flux subtracted in 200 components = 0.00409756 Jy ! Clean residual min=-0.000630 max=0.000673 Jy/beam ! Clean residual mean=0.000001 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0832583 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 123 components and 0.0832583 Jy ! Inverting map ! Added new window around map position (-40, 10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074969 Jy ! Component: 100 - total flux cleaned = 0.00139145 Jy ! Component: 150 - total flux cleaned = 0.00196288 Jy ! Component: 200 - total flux cleaned = 0.0024728 Jy ! Total flux subtracted in 200 components = 0.0024728 Jy ! Clean residual min=-0.000567 max=0.000540 Jy/beam ! Clean residual mean=0.000001 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0857311 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 140 components and 0.0857311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=2.582 mas, bpa=26.88 degrees ! Estimated noise=0.121053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706674 Jy ! Component: 100 - total flux cleaned = 0.00122504 Jy ! Component: 150 - total flux cleaned = 0.00158262 Jy ! Component: 200 - total flux cleaned = 0.00178698 Jy ! Total flux subtracted in 200 components = 0.00178698 Jy ! Clean residual min=-0.000824 max=0.000695 Jy/beam ! Clean residual mean=0.000003 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.0875181 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181369 Jy ! Component: 100 - total flux cleaned = 0.000322109 Jy ! Component: 150 - total flux cleaned = 0.000428613 Jy ! Component: 200 - total flux cleaned = 0.000507822 Jy ! Total flux subtracted in 200 components = 0.000507822 Jy ! Clean residual min=-0.000795 max=0.000705 Jy/beam ! Clean residual mean=0.000003 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.0880259 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 208 components and 0.0880259 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.164 mas, bpa=46.05 degrees ! Estimated noise=0.0938447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07338e-05 Jy ! Component: 100 - total flux cleaned = 0.000186005 Jy ! Component: 150 - total flux cleaned = 0.000229025 Jy ! Component: 200 - total flux cleaned = 0.000269279 Jy ! Total flux subtracted in 200 components = 0.000269279 Jy ! Clean residual min=-0.000567 max=0.000530 Jy/beam ! Clean residual mean=0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0882952 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 226 components and 0.0882952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059749Jy sigma=1.186395 ! Fit after self-cal, rms=0.059728Jy sigma=1.186008 wmodel J1054+8629_X_a_map.mod ! Writing 226 model components to file: J1054+8629_X_a_map.mod wobs J1054+8629_X_a_uvs.fits ! Writing UV FITS file: J1054+8629_X_a_uvs.fits wwins J1054+8629_X_a_map.win ! wwins: Wrote 10 windows to J1054+8629_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.29063e-06 Jy ! Component: 100 - total flux cleaned = -4.48793e-05 Jy ! Component: 150 - total flux cleaned = -3.60165e-05 Jy ! Component: 200 - total flux cleaned = 8.14823e-06 Jy ! Component: 250 - total flux cleaned = 3.4236e-05 Jy ! Component: 300 - total flux cleaned = 5.14025e-05 Jy ! Component: 350 - total flux cleaned = 5.98802e-05 Jy ! Component: 400 - total flux cleaned = 7.65692e-05 Jy ! Component: 450 - total flux cleaned = 7.65467e-05 Jy ! Component: 500 - total flux cleaned = 9.26609e-05 Jy ! Component: 550 - total flux cleaned = 6.87167e-05 Jy ! Component: 600 - total flux cleaned = 6.87464e-05 Jy ! Component: 650 - total flux cleaned = 4.55286e-05 Jy ! Component: 700 - total flux cleaned = 3.76398e-05 Jy ! Component: 750 - total flux cleaned = -7.95136e-06 Jy ! Component: 800 - total flux cleaned = -1.54025e-05 Jy ! Component: 850 - total flux cleaned = -2.29904e-05 Jy ! Component: 900 - total flux cleaned = -8.93105e-05 Jy ! Component: 950 - total flux cleaned = -9.65983e-05 Jy ! Component: 1000 - total flux cleaned = -0.000132731 Jy ! Component: 1050 - total flux cleaned = -0.000154334 Jy ! Component: 1100 - total flux cleaned = -0.000182707 Jy ! Component: 1150 - total flux cleaned = -0.000217881 Jy ! Component: 1200 - total flux cleaned = -0.000224992 Jy ! Component: 1250 - total flux cleaned = -0.000259537 Jy ! Component: 1300 - total flux cleaned = -0.00026636 Jy ! Component: 1350 - total flux cleaned = -0.00029351 Jy ! Component: 1400 - total flux cleaned = -0.000306996 Jy ! Component: 1450 - total flux cleaned = -0.000313709 Jy ! Component: 1500 - total flux cleaned = -0.000327008 Jy ! Component: 1550 - total flux cleaned = -0.000360134 Jy ! Component: 1600 - total flux cleaned = -0.00037319 Jy ! Component: 1650 - total flux cleaned = -0.000392741 Jy ! Component: 1700 - total flux cleaned = -0.000418638 Jy ! Component: 1750 - total flux cleaned = -0.000412161 Jy ! Component: 1800 - total flux cleaned = -0.00043772 Jy ! Component: 1850 - total flux cleaned = -0.000437747 Jy ! Component: 1900 - total flux cleaned = -0.000475635 Jy ! Component: 1950 - total flux cleaned = -0.000475662 Jy ! Component: 2000 - total flux cleaned = -0.000506828 Jy ! Component: 2050 - total flux cleaned = -0.00053774 Jy ! Component: 2100 - total flux cleaned = -0.000568488 Jy ! Component: 2150 - total flux cleaned = -0.000550097 Jy ! Component: 2200 - total flux cleaned = -0.000562329 Jy ! Component: 2250 - total flux cleaned = -0.000556277 Jy ! Component: 2300 - total flux cleaned = -0.000586344 Jy ! Component: 2350 - total flux cleaned = -0.000586361 Jy ! Component: 2400 - total flux cleaned = -0.000604216 Jy ! Component: 2450 - total flux cleaned = -0.000616021 Jy ! Component: 2500 - total flux cleaned = -0.000616041 Jy ! Component: 2550 - total flux cleaned = -0.00063938 Jy ! Component: 2600 - total flux cleaned = -0.000656831 Jy ! Component: 2650 - total flux cleaned = -0.000633705 Jy ! Component: 2700 - total flux cleaned = -0.000627934 Jy ! Component: 2750 - total flux cleaned = -0.000639394 Jy ! Component: 2800 - total flux cleaned = -0.000662151 Jy ! Component: 2850 - total flux cleaned = -0.000662195 Jy ! Component: 2900 - total flux cleaned = -0.000707338 Jy ! Component: 2950 - total flux cleaned = -0.000690524 Jy ! Component: 3000 - total flux cleaned = -0.00071844 Jy ! Component: 3050 - total flux cleaned = -0.000718454 Jy ! Component: 3100 - total flux cleaned = -0.000701842 Jy ! Component: 3150 - total flux cleaned = -0.000723929 Jy ! Component: 3200 - total flux cleaned = -0.00073493 Jy ! Component: 3250 - total flux cleaned = -0.000718567 Jy ! Component: 3300 - total flux cleaned = -0.000724025 Jy ! Component: 3350 - total flux cleaned = -0.000713159 Jy ! Component: 3400 - total flux cleaned = -0.000713201 Jy ! Component: 3450 - total flux cleaned = -0.000718587 Jy ! Component: 3500 - total flux cleaned = -0.000723892 Jy ! Component: 3550 - total flux cleaned = -0.000755803 Jy ! Component: 3600 - total flux cleaned = -0.000739936 Jy ! Component: 3650 - total flux cleaned = -0.000708229 Jy ! Component: 3700 - total flux cleaned = -0.000713483 Jy ! Component: 3750 - total flux cleaned = -0.000676857 Jy ! Component: 3800 - total flux cleaned = -0.000650769 Jy ! Component: 3850 - total flux cleaned = -0.000666332 Jy ! Component: 3900 - total flux cleaned = -0.000681847 Jy ! Component: 3950 - total flux cleaned = -0.000681837 Jy ! Component: 4000 - total flux cleaned = -0.000671605 Jy ! Component: 4050 - total flux cleaned = -0.000707412 Jy ! Total flux subtracted in 4096 components = -0.000666614 Jy ! Clean residual min=-0.000285 max=0.000306 Jy/beam ! Clean residual mean=0.000001 rms=0.000090 Jy/beam ! Combined flux in latest and established models = 0.0876286 Jy keep ! Adding 373 model components to the UV plane model. ! The established model now contains 599 components and 0.0876286 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1054+8629_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 1.164 at 46.05 degrees (North through East) ! Clean map min=-0.00042957 max=0.032251 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1054+8629_X_a_map.fits wmodel /vlbi/uf001/uvm//J1054+8629_X_a_map.mod ! Writing 599 model components to file: /vlbi/uf001/uvm//J1054+8629_X_a_map.mod wobs /vlbi/uf001/uvm//J1054+8629_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1054+8629_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1054+8629_X_a_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uvm//J1054+8629_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0322514 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.94548e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.832101 0.832101 1.6642 3.3284 6.6568 13.3136 26.6272 53.2544 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 360.533 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1054+8629_X_a_dfm.log closed on Sun Jan 13 21:25:15 2019