! Started logfile: /vlbi/uf001/uvm//J1050+0432_S_a_dfm.log on Sun Jan 13 21:23:53 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J1050+0432_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1050+0432_S_a_uvm.fits
! AN table 1: 148 integrations on 28 of 28 possible baselines.
! AN table 2: 98 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.775552 visibilities/baseline/integration-bin.
! Found source: J1050+0432
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 16026 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1050+0432_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 306 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 306 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 306 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.038090Jy  sigma=19.532012
! Fit after  self-cal, rms=0.763180Jy  sigma=14.755552
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=14 mas, bpa=-21 degrees
! Estimated noise=0.459262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177692 Jy
! Component: 100  -  total flux cleaned = 0.216884 Jy
! Total flux subtracted in 100 components = 0.216884 Jy
! Clean residual min=-0.007988 max=0.013033 Jy/beam
! Clean residual mean=0.000012 rms=0.002327 Jy/beam
! Combined flux in latest and established models = 0.216884 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.216884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118246Jy  sigma=1.547893
! Fit after  self-cal, rms=0.118236Jy  sigma=1.547841
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.598 mas, bmaj=13.48 mas, bpa=-18.91 degrees
! Estimated noise=0.302463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202921 Jy
! Component: 100  -  total flux cleaned = 0.0249315 Jy
! Component: 150  -  total flux cleaned = 0.0255814 Jy
! Component: 200  -  total flux cleaned = 0.0256199 Jy
! Total flux subtracted in 200 components = 0.0256199 Jy
! Clean residual min=-0.007435 max=0.007654 Jy/beam
! Clean residual mean=0.000007 rms=0.001702 Jy/beam
! Combined flux in latest and established models = 0.242504 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 33 components and 0.242504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111785Jy  sigma=1.478501
! Fit after  self-cal, rms=0.111741Jy  sigma=1.478174
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.598 x 13.48 at -18.91 degrees (North through East)
! Clean map  min=-0.00736  max=0.23453 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 180 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        1.00     KP        1.06     LA        0.91     
!   MK        1.10     NL        1.05     OV        1.01     PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     FD        0.99     HN        1.04     KP        1.03     
!   LA        0.97     MK        1.12     NL        1.13     PT        1.03     
! 
! 
! Correcting IF 2.
!  A total of 180 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     HN        1.03     KP        1.07     LA        0.91     
!   MK        1.01     NL        1.06     OV        0.87     PT        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.73     FD        0.99     HN        1.00     KP        1.03     
!   LA        0.99     MK        1.00     NL        0.67     PT        1.03     
! 
! 
! Correcting IF 3.
!  A total of 180 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        1.00     KP        1.04     LA        0.89     
!   MK        1.03     NL        1.05     OV        1.00     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        0.97     HN        0.99     KP        1.04     
!   LA        0.95     MK        1.01     NL        1.01     PT        1.03     
! 
! 
! Fit before self-cal, rms=0.111741Jy  sigma=1.478174
! Fit after  self-cal, rms=0.085576Jy  sigma=1.326371
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.612 mas, bmaj=13.77 mas, bpa=-19.54 degrees
! Estimated noise=0.307321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00270715 Jy
! Component: 100  -  total flux cleaned = -0.0022887 Jy
! Component: 150  -  total flux cleaned = -0.00228756 Jy
! Component: 200  -  total flux cleaned = -0.0022855 Jy
! Total flux subtracted in 200 components = -0.0022855 Jy
! Clean residual min=-0.003895 max=0.005071 Jy/beam
! Clean residual mean=0.000009 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.240219 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.240219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084798Jy  sigma=1.322918
! Fit after  self-cal, rms=0.084872Jy  sigma=1.321948
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084872Jy  sigma=1.321948
! Fit after  self-cal, rms=0.068488Jy  sigma=1.214996
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.612 mas, bmaj=13.63 mas, bpa=-19.53 degrees
! Estimated noise=0.305831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000871467 Jy
! Component: 100  -  total flux cleaned = -0.000742401 Jy
! Component: 150  -  total flux cleaned = -0.00063725 Jy
! Component: 200  -  total flux cleaned = -0.000635492 Jy
! Total flux subtracted in 200 components = -0.000635492 Jy
! Clean residual min=-0.001680 max=0.002402 Jy/beam
! Clean residual mean=-0.000005 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.239583 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.239583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068382Jy  sigma=1.213066
! Fit after  self-cal, rms=0.068347Jy  sigma=1.212533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (22, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213724 Jy
! Component: 100  -  total flux cleaned = 0.00234427 Jy
! Component: 150  -  total flux cleaned = 0.00231021 Jy
! Component: 200  -  total flux cleaned = 0.00227738 Jy
! Total flux subtracted in 200 components = 0.00227738 Jy
! Clean residual min=-0.001510 max=0.001737 Jy/beam
! Clean residual mean=-0.000005 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.241861 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.241861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068269Jy  sigma=1.210936
! Fit after  self-cal, rms=0.068264Jy  sigma=1.210812
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068264Jy  sigma=1.210812
! Fit after  self-cal, rms=0.068089Jy  sigma=1.210492
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.612 mas, bmaj=13.6 mas, bpa=-19.53 degrees
! Estimated noise=0.305431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335762 Jy
! Component: 100  -  total flux cleaned = 0.000466533 Jy
! Component: 150  -  total flux cleaned = 0.00052341 Jy
! Component: 200  -  total flux cleaned = 0.000548419 Jy
! Total flux subtracted in 200 components = 0.000548419 Jy
! Clean residual min=-0.001369 max=0.001443 Jy/beam
! Clean residual mean=-0.000003 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.242409 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 113 components and 0.242409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068063Jy  sigma=1.209917
! Fit after  self-cal, rms=0.068061Jy  sigma=1.209897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.23732e-05 Jy
! Component: 100  -  total flux cleaned = -1.95512e-05 Jy
! Component: 150  -  total flux cleaned = -3.85253e-05 Jy
! Component: 200  -  total flux cleaned = -5.6642e-05 Jy
! Total flux subtracted in 200 components = -5.6642e-05 Jy
! Clean residual min=-0.001314 max=0.001413 Jy/beam
! Clean residual mean=-0.000004 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.242352 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 131 components and 0.242352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068050Jy  sigma=1.209671
! Fit after  self-cal, rms=0.068050Jy  sigma=1.209663
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068050Jy  sigma=1.209663
! Fit after  self-cal, rms=0.068018Jy  sigma=1.209601
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.38 mas, bmaj=14.12 mas, bpa=-17.05 degrees
! Estimated noise=0.364025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194502 Jy
! Component: 100  -  total flux cleaned = 0.000215333 Jy
! Component: 150  -  total flux cleaned = 0.000215949 Jy
! Component: 200  -  total flux cleaned = 0.000232707 Jy
! Total flux subtracted in 200 components = 0.000232707 Jy
! Clean residual min=-0.001648 max=0.001692 Jy/beam
! Clean residual mean=-0.000007 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.242585 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 158 components and 0.242585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068009Jy  sigma=1.209417
! Fit after  self-cal, rms=0.068010Jy  sigma=1.209411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.88318e-05 Jy
! Component: 100  -  total flux cleaned = -2.51767e-05 Jy
! Component: 150  -  total flux cleaned = -3.69318e-05 Jy
! Component: 200  -  total flux cleaned = -3.65225e-05 Jy
! Total flux subtracted in 200 components = -3.65225e-05 Jy
! Clean residual min=-0.001634 max=0.001599 Jy/beam
! Clean residual mean=-0.000007 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.242549 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 185 components and 0.242549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068006Jy  sigma=1.209339
! Fit after  self-cal, rms=0.068007Jy  sigma=1.209337
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.614 mas, bmaj=13.58 mas, bpa=-19.53 degrees
! Estimated noise=0.305408 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.614 x 13.58 at -19.53 degrees (North through East)
! Clean map  min=-0.0017562  max=0.23234 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=14.07 mas, bpa=-21.4 degrees
! Estimated noise=0.465477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17812 Jy
! Component: 100  -  total flux cleaned = 0.217291 Jy
! Component: 150  -  total flux cleaned = 0.230563 Jy
! Component: 200  -  total flux cleaned = 0.236765 Jy
! Total flux subtracted in 200 components = 0.236765 Jy
! Clean residual min=-0.003682 max=0.003650 Jy/beam
! Clean residual mean=-0.000000 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.236765 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.236765 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.614 mas, bmaj=13.58 mas, bpa=-19.53 degrees
! Estimated noise=0.305408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00358694 Jy
! Component: 100  -  total flux cleaned = 0.00427966 Jy
! Component: 150  -  total flux cleaned = 0.00496836 Jy
! Component: 200  -  total flux cleaned = 0.00529723 Jy
! Total flux subtracted in 200 components = 0.00529723 Jy
! Clean residual min=-0.002056 max=0.002217 Jy/beam
! Clean residual mean=-0.000003 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.242062 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 49 components and 0.242062 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.38 mas, bmaj=14.12 mas, bpa=-17.05 degrees
! Estimated noise=0.364025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000899968 Jy
! Component: 100  -  total flux cleaned = 0.000823237 Jy
! Component: 150  -  total flux cleaned = 0.000755438 Jy
! Component: 200  -  total flux cleaned = 0.000752857 Jy
! Total flux subtracted in 200 components = 0.000752857 Jy
! Clean residual min=-0.001779 max=0.002126 Jy/beam
! Clean residual mean=-0.000006 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.242815 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103288 Jy
! Component: 100  -  total flux cleaned = -0.000102033 Jy
! Component: 150  -  total flux cleaned = -0.000143972 Jy
! Component: 200  -  total flux cleaned = -0.000180808 Jy
! Total flux subtracted in 200 components = -0.000180808 Jy
! Clean residual min=-0.001804 max=0.001942 Jy/beam
! Clean residual mean=-0.000006 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.242634 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 105 components and 0.242634 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.614 mas, bmaj=13.58 mas, bpa=-19.53 degrees
! Estimated noise=0.305408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335905 Jy
! Component: 100  -  total flux cleaned = 0.000555952 Jy
! Component: 150  -  total flux cleaned = 0.000604893 Jy
! Component: 200  -  total flux cleaned = 0.000526574 Jy
! Total flux subtracted in 200 components = 0.000526574 Jy
! Clean residual min=-0.001529 max=0.001604 Jy/beam
! Clean residual mean=-0.000003 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.243161 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.243161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068063Jy  sigma=1.210405
! Fit after  self-cal, rms=0.068057Jy  sigma=1.210266
wmodel J1050+0432_S_a_map.mod
! Writing 130 model components to file: J1050+0432_S_a_map.mod
wobs   J1050+0432_S_a_uvs.fits
! Writing UV FITS file: J1050+0432_S_a_uvs.fits
wwins  J1050+0432_S_a_map.win
! wwins: Wrote 2 windows to J1050+0432_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000311826 Jy
! Component: 100  -  total flux cleaned = -0.000512166 Jy
! Component: 150  -  total flux cleaned = -0.000606864 Jy
! Component: 200  -  total flux cleaned = -0.000584628 Jy
! Component: 250  -  total flux cleaned = -0.000562852 Jy
! Component: 300  -  total flux cleaned = -0.000499804 Jy
! Component: 350  -  total flux cleaned = -0.000459421 Jy
! Component: 400  -  total flux cleaned = -0.00045989 Jy
! Component: 450  -  total flux cleaned = -0.000401845 Jy
! Component: 500  -  total flux cleaned = -0.000383782 Jy
! Component: 550  -  total flux cleaned = -0.000365646 Jy
! Component: 600  -  total flux cleaned = -0.000347868 Jy
! Component: 650  -  total flux cleaned = -0.000329918 Jy
! Component: 700  -  total flux cleaned = -0.000243788 Jy
! Component: 750  -  total flux cleaned = -0.000260746 Jy
! Component: 800  -  total flux cleaned = -0.000228097 Jy
! Component: 850  -  total flux cleaned = -0.000212255 Jy
! Component: 900  -  total flux cleaned = -0.000243948 Jy
! Component: 950  -  total flux cleaned = -0.000259361 Jy
! Component: 1000  -  total flux cleaned = -0.000259437 Jy
! Component: 1050  -  total flux cleaned = -0.000229637 Jy
! Component: 1100  -  total flux cleaned = -0.000229692 Jy
! Component: 1150  -  total flux cleaned = -0.000186083 Jy
! Component: 1200  -  total flux cleaned = -0.000143697 Jy
! Component: 1250  -  total flux cleaned = -0.000171668 Jy
! Component: 1300  -  total flux cleaned = -0.000212702 Jy
! Component: 1350  -  total flux cleaned = -0.000225951 Jy
! Component: 1400  -  total flux cleaned = -0.000199042 Jy
! Component: 1450  -  total flux cleaned = -0.000225464 Jy
! Component: 1500  -  total flux cleaned = -0.000251335 Jy
! Component: 1550  -  total flux cleaned = -0.000212883 Jy
! Component: 1600  -  total flux cleaned = -0.000276202 Jy
! Component: 1650  -  total flux cleaned = -0.000238444 Jy
! Component: 1700  -  total flux cleaned = -0.00021362 Jy
! Component: 1750  -  total flux cleaned = -0.000250164 Jy
! Component: 1800  -  total flux cleaned = -0.000226103 Jy
! Component: 1850  -  total flux cleaned = -0.000237765 Jy
! Component: 1900  -  total flux cleaned = -0.000190843 Jy
! Component: 1950  -  total flux cleaned = -0.000225626 Jy
! Component: 2000  -  total flux cleaned = -0.000156804 Jy
! Component: 2050  -  total flux cleaned = -0.000145606 Jy
! Component: 2100  -  total flux cleaned = -0.000134373 Jy
! Component: 2150  -  total flux cleaned = -0.000167484 Jy
! Component: 2200  -  total flux cleaned = -9.09249e-05 Jy
! Component: 2250  -  total flux cleaned = -0.000112728 Jy
! Component: 2300  -  total flux cleaned = -0.000102201 Jy
! Component: 2350  -  total flux cleaned = -0.000102402 Jy
! Component: 2400  -  total flux cleaned = -9.19859e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000123423 Jy
! Component: 2500  -  total flux cleaned = -0.000123465 Jy
! Component: 2550  -  total flux cleaned = -0.000123378 Jy
! Component: 2600  -  total flux cleaned = -0.000113281 Jy
! Component: 2650  -  total flux cleaned = -0.000133363 Jy
! Component: 2700  -  total flux cleaned = -0.000182793 Jy
! Component: 2750  -  total flux cleaned = -0.000133736 Jy
! Component: 2800  -  total flux cleaned = -0.000182335 Jy
! Component: 2850  -  total flux cleaned = -0.000163063 Jy
! Component: 2900  -  total flux cleaned = -0.000163033 Jy
! Component: 2950  -  total flux cleaned = -0.000181971 Jy
! Component: 3000  -  total flux cleaned = -0.000219493 Jy
! Component: 3050  -  total flux cleaned = -0.000265836 Jy
! Component: 3100  -  total flux cleaned = -0.000256451 Jy
! Component: 3150  -  total flux cleaned = -0.000292992 Jy
! Component: 3200  -  total flux cleaned = -0.000301956 Jy
! Component: 3250  -  total flux cleaned = -0.000328999 Jy
! Component: 3300  -  total flux cleaned = -0.000355717 Jy
! Component: 3350  -  total flux cleaned = -0.000399996 Jy
! Component: 3400  -  total flux cleaned = -0.000417703 Jy
! Component: 3450  -  total flux cleaned = -0.000435134 Jy
! Component: 3500  -  total flux cleaned = -0.000452472 Jy
! Component: 3550  -  total flux cleaned = -0.000478263 Jy
! Component: 3600  -  total flux cleaned = -0.000503784 Jy
! Component: 3650  -  total flux cleaned = -0.000520532 Jy
! Component: 3700  -  total flux cleaned = -0.000503843 Jy
! Component: 3750  -  total flux cleaned = -0.00049555 Jy
! Component: 3800  -  total flux cleaned = -0.000512186 Jy
! Component: 3850  -  total flux cleaned = -0.000520449 Jy
! Component: 3900  -  total flux cleaned = -0.000496132 Jy
! Component: 3950  -  total flux cleaned = -0.000536563 Jy
! Component: 4000  -  total flux cleaned = -0.000512382 Jy
! Component: 4050  -  total flux cleaned = -0.000536301 Jy
! Total flux subtracted in 4096 components = -0.000520398 Jy
! Clean residual min=-0.000501 max=0.000407 Jy/beam
! Clean residual mean=-0.000002 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.24264 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 457 components and 0.24264 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1050+0432_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.614 x 13.58 at -19.53 degrees (North through East)
! Clean map  min=-0.0011952  max=0.23213 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1050+0432_S_a_map.fits
wmodel /vlbi/uf001/uvm//J1050+0432_S_a_map.mod
! Writing 457 model components to file: /vlbi/uf001/uvm//J1050+0432_S_a_map.mod
wobs   /vlbi/uf001/uvm//J1050+0432_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1050+0432_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1050+0432_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J1050+0432_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.23213 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000158786 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.205211 0.205211 0.410423 0.820846 1.64169 3.28338 6.56677 13.1335 26.2671 52.5341
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.232 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1461.91 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1050+0432_S_a_dfm.log closed on Sun Jan 13 21:23:58 2019