! Started logfile: /vlbi/uf001/uvm//J1049-2231_X_a_dfm.log on Sun Jan 13 21:23:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1049-2231_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1049-2231_X_a_uvm.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! AN table 2: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.997638 visibilities/baseline/integration-bin. ! Found source: J1049-2231 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 50688 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1049-2231_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005335Jy sigma=20.740232 ! Fit after self-cal, rms=0.939784Jy sigma=19.354177 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5912 mas, bmaj=1.74 mas, bpa=-10.83 degrees ! Estimated noise=0.322141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457618 Jy ! Component: 100 - total flux cleaned = 0.0571332 Jy ! Total flux subtracted in 100 components = 0.0571332 Jy ! Clean residual min=-0.002997 max=0.005651 Jy/beam ! Clean residual mean=-0.000008 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0571331 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0571331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068464Jy sigma=1.310042 ! Fit after self-cal, rms=0.067485Jy sigma=1.290212 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00530868 Jy ! Component: 100 - total flux cleaned = 0.0078153 Jy ! Total flux subtracted in 100 components = 0.0078153 Jy ! Clean residual min=-0.002693 max=0.005360 Jy/beam ! Clean residual mean=-0.000007 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0649484 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.0649484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066845Jy sigma=1.273739 ! Fit after self-cal, rms=0.066846Jy sigma=1.273466 ! Inverting map ! Added new window around map position (-1.8, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528135 Jy ! Component: 100 - total flux cleaned = 0.00849077 Jy ! Total flux subtracted in 100 components = 0.00849077 Jy ! Clean residual min=-0.002481 max=0.003849 Jy/beam ! Clean residual mean=-0.000005 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0734392 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.0734392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066056Jy sigma=1.253563 ! Fit after self-cal, rms=0.065995Jy sigma=1.252217 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=2.251 mas, bpa=-10.78 degrees ! Estimated noise=0.157818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752302 Jy ! Component: 100 - total flux cleaned = 0.0122374 Jy ! Component: 150 - total flux cleaned = 0.0157708 Jy ! Component: 200 - total flux cleaned = 0.0184902 Jy ! Total flux subtracted in 200 components = 0.0184902 Jy ! Clean residual min=-0.002011 max=0.002782 Jy/beam ! Clean residual mean=-0.000007 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0919294 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 70 components and 0.0919294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065036Jy sigma=1.228506 ! Fit after self-cal, rms=0.064945Jy sigma=1.226149 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8266 x 2.251 at -10.78 degrees (North through East) ! Clean map min=-0.0018801 max=0.064181 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.97 HN 1.13 KP 0.96 ! LA 0.90 MK 1.05 NL 1.21 OV 1.01 ! PT 0.85 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.93 HN 1.07 KP 1.01 ! LA 0.97 MK 0.96 NL 1.02 OV 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.94 HN 1.20 KP 0.90 ! LA 0.96 MK 1.09 NL 1.12 OV 1.00 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.91 HN 1.04 KP 1.00 ! LA 0.96 MK 0.99 NL 1.03 OV 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.98 HN 1.08 KP 0.97 ! LA 0.95 MK 1.08 NL 1.15 OV 0.90 ! PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.98 HN 1.03 KP 1.02 ! LA 0.93 MK 0.99 NL 0.99 OV 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 1.14 KP 0.94 ! LA 0.94 MK 1.04 NL 1.17 OV 1.00 ! PT 0.89 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.96 HN 0.99 KP 1.02 ! LA 0.94 MK 1.04 NL 1.05 OV 0.90 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.18 KP 0.90 ! LA 0.99 MK 1.05 NL 1.15 OV 0.96 ! PT 0.89 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 1.00 KP 0.98 ! LA 1.00 MK 0.94 NL 1.00 OV 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.12 KP 0.95 ! LA 0.97 MK 1.09 NL 1.18 OV 0.94 ! PT 0.89 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.95 HN 1.09 KP 1.00 ! LA 0.99 MK 0.96 NL 1.02 OV 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 1.17 KP 0.99 ! LA 0.99 MK 1.05 NL 1.12 OV 0.95 ! PT 0.85 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.93 HN 1.06 KP 1.03 ! LA 0.95 MK 0.97 NL 1.01 OV 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.20 KP 0.94 ! LA 0.94 MK 1.05 NL 1.23 OV 0.94 ! PT 0.87 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.95 HN 0.99 KP 1.01 ! LA 0.99 MK 1.01 NL 0.99 OV 0.88 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.14 KP 0.97 ! LA 0.95 MK 1.07 NL 1.19 OV 0.91 ! PT 0.91 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.97 HN 1.01 KP 1.04 ! LA 0.91 MK 0.92 NL 1.06 OV 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.04 KP 0.91 ! LA 0.95 MK 1.09 NL 1.15 OV 1.03 ! PT 0.88 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.93 HN 0.99 KP 1.04 ! LA 0.92 MK 0.98 NL 1.02 OV 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.08 KP 0.94 ! LA 0.96 MK 1.05 NL 1.21 OV 0.96 ! PT 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 1.03 KP 1.02 ! LA 0.92 MK 1.01 NL 1.07 OV 0.85 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.10 KP 0.94 ! LA 0.93 MK 1.01 NL 1.20 OV 0.89 ! PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.93 HN 0.96 KP 1.02 ! LA 0.97 MK 0.91 NL 1.02 OV 0.89 ! ! ! Fit before self-cal, rms=0.064945Jy sigma=1.226149 ! Fit after self-cal, rms=0.064662Jy sigma=1.214996 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8407 mas, bmaj=2.26 mas, bpa=-10.48 degrees ! Estimated noise=0.153693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251806 Jy ! Component: 100 - total flux cleaned = 0.00394622 Jy ! Component: 150 - total flux cleaned = 0.00491617 Jy ! Component: 200 - total flux cleaned = 0.00534595 Jy ! Total flux subtracted in 200 components = 0.00534595 Jy ! Clean residual min=-0.001146 max=0.001453 Jy/beam ! Clean residual mean=0.000001 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.0972753 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 103 components and 0.0972753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064568Jy sigma=1.212299 ! Fit after self-cal, rms=0.064647Jy sigma=1.211456 ! Inverting map ! Added new window around map position (-20, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124329 Jy ! Component: 100 - total flux cleaned = 0.00176646 Jy ! Component: 150 - total flux cleaned = 0.00195514 Jy ! Component: 200 - total flux cleaned = 0.00203758 Jy ! Total flux subtracted in 200 components = 0.00203758 Jy ! Clean residual min=-0.001040 max=0.001106 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0993129 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 119 components and 0.0993129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064618Jy sigma=1.210771 ! Fit after self-cal, rms=0.064614Jy sigma=1.210700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064614Jy sigma=1.210700 ! Fit after self-cal, rms=0.064850Jy sigma=1.209777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8394 mas, bmaj=2.254 mas, bpa=-10.44 degrees ! Estimated noise=0.153756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000782585 Jy ! Component: 100 - total flux cleaned = 0.00112668 Jy ! Component: 150 - total flux cleaned = 0.00126579 Jy ! Component: 200 - total flux cleaned = 0.00132724 Jy ! Total flux subtracted in 200 components = 0.00132724 Jy ! Clean residual min=-0.000904 max=0.001143 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.10064 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 134 components and 0.10064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064837Jy sigma=1.209471 ! Fit after self-cal, rms=0.064846Jy sigma=1.209427 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111212 Jy ! Component: 100 - total flux cleaned = 0.00165888 Jy ! Component: 150 - total flux cleaned = 0.00188998 Jy ! Component: 200 - total flux cleaned = 0.00198331 Jy ! Total flux subtracted in 200 components = 0.00198331 Jy ! Clean residual min=-0.000828 max=0.000984 Jy/beam ! Clean residual mean=0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.102623 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 146 components and 0.102623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064824Jy sigma=1.208974 ! Fit after self-cal, rms=0.064820Jy sigma=1.208923 ! Inverting map ! Added new window around map position (13.8, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814654 Jy ! Component: 100 - total flux cleaned = 0.0012223 Jy ! Component: 150 - total flux cleaned = 0.00138795 Jy ! Component: 200 - total flux cleaned = 0.00149308 Jy ! Total flux subtracted in 200 components = 0.00149308 Jy ! Clean residual min=-0.000822 max=0.000836 Jy/beam ! Clean residual mean=0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.104116 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 168 components and 0.104116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064806Jy sigma=1.208616 ! Fit after self-cal, rms=0.064806Jy sigma=1.208590 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064806Jy sigma=1.208590 ! Fit after self-cal, rms=0.064889Jy sigma=1.207570 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8382 mas, bmaj=2.252 mas, bpa=-10.44 degrees ! Estimated noise=0.153509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496625 Jy ! Component: 100 - total flux cleaned = 0.000783747 Jy ! Component: 150 - total flux cleaned = 0.000911318 Jy ! Component: 200 - total flux cleaned = 0.000937504 Jy ! Total flux subtracted in 200 components = 0.000937504 Jy ! Clean residual min=-0.000759 max=0.000741 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.105054 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 182 components and 0.105054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064881Jy sigma=1.207424 ! Fit after self-cal, rms=0.064887Jy sigma=1.207370 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143081 Jy ! Component: 100 - total flux cleaned = 0.000156006 Jy ! Component: 150 - total flux cleaned = 0.000167937 Jy ! Component: 200 - total flux cleaned = 0.000155879 Jy ! Total flux subtracted in 200 components = 0.000155879 Jy ! Clean residual min=-0.000741 max=0.000711 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.10521 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 187 components and 0.10521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064882Jy sigma=1.207285 ! Fit after self-cal, rms=0.064881Jy sigma=1.207284 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064881Jy sigma=1.207284 ! Fit after self-cal, rms=0.064860Jy sigma=1.207269 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=5.121 mas, bpa=-2.418 degrees ! Estimated noise=0.190712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060318 Jy ! Component: 100 - total flux cleaned = 0.000689686 Jy ! Component: 150 - total flux cleaned = 0.000659282 Jy ! Component: 200 - total flux cleaned = 0.000649855 Jy ! Total flux subtracted in 200 components = 0.000649855 Jy ! Clean residual min=-0.000864 max=0.000739 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.10586 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 198 components and 0.10586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064859Jy sigma=1.207223 ! Fit after self-cal, rms=0.064859Jy sigma=1.207207 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114612 Jy ! Component: 100 - total flux cleaned = 0.00014326 Jy ! Component: 150 - total flux cleaned = 0.000134399 Jy ! Component: 200 - total flux cleaned = 0.000134494 Jy ! Total flux subtracted in 200 components = 0.000134494 Jy ! Clean residual min=-0.000837 max=0.000738 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.105994 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 208 components and 0.105994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064859Jy sigma=1.207192 ! Fit after self-cal, rms=0.064859Jy sigma=1.207190 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8376 mas, bmaj=2.251 mas, bpa=-10.42 degrees ! Estimated noise=0.153522 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8376 x 2.251 at -10.42 degrees (North through East) ! Clean map min=-0.00066808 max=0.062528 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5969 mas, bmaj=1.729 mas, bpa=-10.47 degrees ! Estimated noise=0.318407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456478 Jy ! Component: 100 - total flux cleaned = 0.0575613 Jy ! Component: 150 - total flux cleaned = 0.064089 Jy ! Component: 200 - total flux cleaned = 0.0690241 Jy ! Total flux subtracted in 200 components = 0.0690241 Jy ! Clean residual min=-0.002122 max=0.003076 Jy/beam ! Clean residual mean=-0.000005 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0690241 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0690241 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8376 mas, bmaj=2.251 mas, bpa=-10.42 degrees ! Estimated noise=0.153522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813392 Jy ! Component: 100 - total flux cleaned = 0.0135581 Jy ! Component: 150 - total flux cleaned = 0.0174711 Jy ! Component: 200 - total flux cleaned = 0.0205117 Jy ! Total flux subtracted in 200 components = 0.0205117 Jy ! Clean residual min=-0.001318 max=0.002172 Jy/beam ! Clean residual mean=-0.000005 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0895358 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 79 components and 0.0895358 Jy ! Inverting map ! Added new window around map position (-0.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256136 Jy ! Component: 100 - total flux cleaned = 0.00457697 Jy ! Component: 150 - total flux cleaned = 0.00622428 Jy ! Component: 200 - total flux cleaned = 0.00760577 Jy ! Total flux subtracted in 200 components = 0.00760577 Jy ! Clean residual min=-0.001026 max=0.001167 Jy/beam ! Clean residual mean=-0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.0971416 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 118 components and 0.0971416 Jy ! Inverting map ! Added new window around map position (4.2, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126964 Jy ! Component: 100 - total flux cleaned = 0.00231736 Jy ! Component: 150 - total flux cleaned = 0.00322922 Jy ! Component: 200 - total flux cleaned = 0.0040261 Jy ! Total flux subtracted in 200 components = 0.0040261 Jy ! Clean residual min=-0.000898 max=0.000829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.101168 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 151 components and 0.101168 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=5.121 mas, bpa=-2.418 degrees ! Estimated noise=0.190712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116744 Jy ! Component: 100 - total flux cleaned = 0.00200435 Jy ! Component: 150 - total flux cleaned = 0.00266288 Jy ! Component: 200 - total flux cleaned = 0.00318979 Jy ! Total flux subtracted in 200 components = 0.00318979 Jy ! Clean residual min=-0.000965 max=0.000807 Jy/beam ! Clean residual mean=0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.104357 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370599 Jy ! Component: 100 - total flux cleaned = 0.000526085 Jy ! Component: 150 - total flux cleaned = 0.000639861 Jy ! Component: 200 - total flux cleaned = 0.000732038 Jy ! Total flux subtracted in 200 components = 0.000732038 Jy ! Clean residual min=-0.000915 max=0.000782 Jy/beam ! Clean residual mean=0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.105089 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 208 components and 0.105089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8376 mas, bmaj=2.251 mas, bpa=-10.42 degrees ! Estimated noise=0.153522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.77676e-05 Jy ! Component: 100 - total flux cleaned = -3.25704e-05 Jy ! Component: 150 - total flux cleaned = -6.31279e-05 Jy ! Component: 200 - total flux cleaned = -9.16756e-05 Jy ! Total flux subtracted in 200 components = -9.16756e-05 Jy ! Clean residual min=-0.000799 max=0.000691 Jy/beam ! Clean residual mean=0.000000 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.104998 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 230 components and 0.104998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064845Jy sigma=1.207133 ! Fit after self-cal, rms=0.064834Jy sigma=1.207020 wmodel J1049-2231_X_a_map.mod ! Writing 230 model components to file: J1049-2231_X_a_map.mod wobs J1049-2231_X_a_uvs.fits ! Writing UV FITS file: J1049-2231_X_a_uvs.fits wwins J1049-2231_X_a_map.win ! wwins: Wrote 8 windows to J1049-2231_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000264565 Jy ! Component: 100 - total flux cleaned = -0.000405087 Jy ! Component: 150 - total flux cleaned = -0.000515206 Jy ! Component: 200 - total flux cleaned = -0.00059803 Jy ! Component: 250 - total flux cleaned = -0.000667294 Jy ! Component: 300 - total flux cleaned = -0.00067842 Jy ! Component: 350 - total flux cleaned = -0.000711566 Jy ! Component: 400 - total flux cleaned = -0.000733316 Jy ! Component: 450 - total flux cleaned = -0.000744037 Jy ! Component: 500 - total flux cleaned = -0.000796589 Jy ! Component: 550 - total flux cleaned = -0.000806817 Jy ! Component: 600 - total flux cleaned = -0.000837243 Jy ! Component: 650 - total flux cleaned = -0.000877385 Jy ! Component: 700 - total flux cleaned = -0.000897226 Jy ! Component: 750 - total flux cleaned = -0.000956 Jy ! Component: 800 - total flux cleaned = -0.00098495 Jy ! Component: 850 - total flux cleaned = -0.000994561 Jy ! Component: 900 - total flux cleaned = -0.00101359 Jy ! Component: 950 - total flux cleaned = -0.00106037 Jy ! Component: 1000 - total flux cleaned = -0.00105116 Jy ! Component: 1050 - total flux cleaned = -0.00111539 Jy ! Component: 1100 - total flux cleaned = -0.0011062 Jy ! Component: 1150 - total flux cleaned = -0.00115125 Jy ! Component: 1200 - total flux cleaned = -0.0011513 Jy ! Component: 1250 - total flux cleaned = -0.00117802 Jy ! Component: 1300 - total flux cleaned = -0.00123045 Jy ! Component: 1350 - total flux cleaned = -0.00123039 Jy ! Component: 1400 - total flux cleaned = -0.00126485 Jy ! Component: 1450 - total flux cleaned = -0.00128185 Jy ! Component: 1500 - total flux cleaned = -0.0012902 Jy ! Component: 1550 - total flux cleaned = -0.00129032 Jy ! Component: 1600 - total flux cleaned = -0.00134015 Jy ! Component: 1650 - total flux cleaned = -0.00134842 Jy ! Component: 1700 - total flux cleaned = -0.001373 Jy ! Component: 1750 - total flux cleaned = -0.00141346 Jy ! Component: 1800 - total flux cleaned = -0.00141342 Jy ! Component: 1850 - total flux cleaned = -0.00139748 Jy ! Component: 1900 - total flux cleaned = -0.00142933 Jy ! Component: 1950 - total flux cleaned = -0.0014372 Jy ! Component: 2000 - total flux cleaned = -0.0014216 Jy ! Component: 2050 - total flux cleaned = -0.00143714 Jy ! Component: 2100 - total flux cleaned = -0.00142941 Jy ! Component: 2150 - total flux cleaned = -0.00143702 Jy ! Component: 2200 - total flux cleaned = -0.00143705 Jy ! Component: 2250 - total flux cleaned = -0.00140676 Jy ! Component: 2300 - total flux cleaned = -0.00142173 Jy ! Component: 2350 - total flux cleaned = -0.00142166 Jy ! Component: 2400 - total flux cleaned = -0.00137715 Jy ! Component: 2450 - total flux cleaned = -0.00140668 Jy ! Component: 2500 - total flux cleaned = -0.00137003 Jy ! Component: 2550 - total flux cleaned = -0.00140652 Jy ! Component: 2600 - total flux cleaned = -0.00137743 Jy ! Component: 2650 - total flux cleaned = -0.00136304 Jy ! Component: 2700 - total flux cleaned = -0.00134873 Jy ! Component: 2750 - total flux cleaned = -0.00136306 Jy ! Component: 2800 - total flux cleaned = -0.00135592 Jy ! Component: 2850 - total flux cleaned = -0.00129236 Jy ! Component: 2900 - total flux cleaned = -0.00131349 Jy ! Component: 2950 - total flux cleaned = -0.00132047 Jy ! Component: 3000 - total flux cleaned = -0.00129957 Jy ! Component: 3050 - total flux cleaned = -0.0012927 Jy ! Component: 3100 - total flux cleaned = -0.00126522 Jy ! Component: 3150 - total flux cleaned = -0.00127895 Jy ! Component: 3200 - total flux cleaned = -0.00127209 Jy ! Component: 3250 - total flux cleaned = -0.00125854 Jy ! Component: 3300 - total flux cleaned = -0.00127203 Jy ! Component: 3350 - total flux cleaned = -0.00124527 Jy ! Component: 3400 - total flux cleaned = -0.00126527 Jy ! Component: 3450 - total flux cleaned = -0.00125859 Jy ! Component: 3500 - total flux cleaned = -0.00122555 Jy ! Component: 3550 - total flux cleaned = -0.00121901 Jy ! Component: 3600 - total flux cleaned = -0.00120589 Jy ! Component: 3650 - total flux cleaned = -0.00122553 Jy ! Component: 3700 - total flux cleaned = -0.00124504 Jy ! Component: 3750 - total flux cleaned = -0.00123852 Jy ! Component: 3800 - total flux cleaned = -0.00121282 Jy ! Component: 3850 - total flux cleaned = -0.00116797 Jy ! Component: 3900 - total flux cleaned = -0.00114883 Jy ! Component: 3950 - total flux cleaned = -0.00117423 Jy ! Component: 4000 - total flux cleaned = -0.00118684 Jy ! Component: 4050 - total flux cleaned = -0.00113014 Jy ! Total flux subtracted in 4096 components = -0.00113018 Jy ! Clean residual min=-0.000371 max=0.000390 Jy/beam ! Clean residual mean=0.000001 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.103868 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 552 components and 0.103868 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1049-2231_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8376 x 2.251 at -10.42 degrees (North through East) ! Clean map min=-0.00064198 max=0.062359 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1049-2231_X_a_map.fits wmodel /vlbi/uf001/uvm//J1049-2231_X_a_map.mod ! Writing 552 model components to file: /vlbi/uf001/uvm//J1049-2231_X_a_map.mod wobs /vlbi/uf001/uvm//J1049-2231_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1049-2231_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1049-2231_X_a_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J1049-2231_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0623595 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110282 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.530548 0.530548 1.0611 2.12219 4.24439 8.48877 16.9775 33.9551 67.9102 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.062 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 565.452 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1049-2231_X_a_dfm.log closed on Sun Jan 13 21:23:52 2019