! Started logfile: /vlbi/uf001/uva//J1045+1735_X_dfm.log on Mon Jan 14 01:00:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1045+1735_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1045+1735_X_uva.fits ! AN table 1: 87 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.831281 visibilities/baseline/integration-bin. ! Found source: J1045+1735 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 24300 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1045+1735_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.085482Jy sigma=20.359692 ! Fit after self-cal, rms=0.606412Jy sigma=10.898562 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6239 mas, bmaj=1.388 mas, bpa=-3.51 degrees ! Estimated noise=0.507744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32389 Jy ! Component: 100 - total flux cleaned = 0.394922 Jy ! Total flux subtracted in 100 components = 0.394922 Jy ! Clean residual min=-0.016416 max=0.025738 Jy/beam ! Clean residual mean=0.000013 rms=0.003825 Jy/beam ! Combined flux in latest and established models = 0.394922 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.394922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120767Jy sigma=1.854683 ! Fit after self-cal, rms=0.120757Jy sigma=1.854539 ! Inverting map ! Added new window around map position (2.6, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251675 Jy ! Component: 100 - total flux cleaned = 0.0310493 Jy ! Total flux subtracted in 100 components = 0.0310493 Jy ! Clean residual min=-0.015263 max=0.020117 Jy/beam ! Clean residual mean=0.000009 rms=0.003291 Jy/beam ! Combined flux in latest and established models = 0.425971 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.425971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116847Jy sigma=1.726457 ! Fit after self-cal, rms=0.116745Jy sigma=1.723144 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8012 mas, bmaj=1.645 mas, bpa=-1.63 degrees ! Estimated noise=0.253398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286259 Jy ! Component: 100 - total flux cleaned = 0.00499706 Jy ! Component: 150 - total flux cleaned = 0.00478677 Jy ! Component: 200 - total flux cleaned = 0.00439113 Jy ! Total flux subtracted in 200 components = 0.00439113 Jy ! Clean residual min=-0.016767 max=0.019621 Jy/beam ! Clean residual mean=0.000030 rms=0.004333 Jy/beam ! Combined flux in latest and established models = 0.430362 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.430362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114927Jy sigma=1.696037 ! Fit after self-cal, rms=0.114879Jy sigma=1.694753 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8012 x 1.645 at -1.63 degrees (North through East) ! Clean map min=-0.01614 max=0.4139 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.93 LA 0.93 MK 0.99 ! NL 1.11 OV 1.04 PT 0.94 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.92 LA 0.93 MK 0.98 ! NL 1.10 OV 1.02 PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.93 LA 0.93 MK 0.99 ! NL 1.11 OV 1.01 PT 0.93 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.94 LA 0.93 MK 0.98 ! NL 1.10 OV 1.03 PT 0.96 SC 1.01 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.91 LA 0.92 MK 0.98 ! NL 1.11 OV 1.04 PT 0.98 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.93 LA 0.92 MK 0.97 ! NL 1.12 OV 1.02 PT 0.93 SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.92 LA 0.94 MK 0.98 ! NL 1.10 OV 1.02 PT 0.93 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.92 LA 0.93 MK 0.99 ! NL 1.11 OV 1.03 PT 0.94 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.92 LA 0.94 MK 1.00 ! NL 1.10 OV 1.02 PT 0.95 SC 1.02 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.93 LA 0.92 MK 0.99 ! NL 1.09 OV 1.03 PT 0.94 SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.91 LA 0.93 MK 0.97 ! NL 1.11 OV 1.04 PT 0.94 SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.92 LA 0.93 MK 0.99 ! NL 1.09 OV 1.03 PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.114879Jy sigma=1.694753 ! Fit after self-cal, rms=0.108593Jy sigma=1.563659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8007 mas, bmaj=1.652 mas, bpa=-2.211 degrees ! Estimated noise=0.247969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00621862 Jy ! Component: 100 - total flux cleaned = -0.00807347 Jy ! Component: 150 - total flux cleaned = -0.00985122 Jy ! Component: 200 - total flux cleaned = -0.0106542 Jy ! Total flux subtracted in 200 components = -0.0106542 Jy ! Clean residual min=-0.013624 max=0.016424 Jy/beam ! Clean residual mean=0.000008 rms=0.003621 Jy/beam ! Combined flux in latest and established models = 0.419708 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.419708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107278Jy sigma=1.561406 ! Fit after self-cal, rms=0.107307Jy sigma=1.560935 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107307Jy sigma=1.560935 ! Fit after self-cal, rms=0.113602Jy sigma=1.231856 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.794 mas, bmaj=1.658 mas, bpa=-2.097 degrees ! Estimated noise=0.249563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00643845 Jy ! Component: 100 - total flux cleaned = -0.00660933 Jy ! Component: 150 - total flux cleaned = -0.00644976 Jy ! Component: 200 - total flux cleaned = -0.0063109 Jy ! Total flux subtracted in 200 components = -0.0063109 Jy ! Clean residual min=-0.004067 max=0.005702 Jy/beam ! Clean residual mean=0.000008 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.413397 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.413397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112927Jy sigma=1.208086 ! Fit after self-cal, rms=0.113121Jy sigma=1.206308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380137 Jy ! Component: 100 - total flux cleaned = 0.00395663 Jy ! Component: 150 - total flux cleaned = 0.00373661 Jy ! Component: 200 - total flux cleaned = 0.00334551 Jy ! Total flux subtracted in 200 components = 0.00334551 Jy ! Clean residual min=-0.003628 max=0.005389 Jy/beam ! Clean residual mean=0.000007 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.416743 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.416742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112796Jy sigma=1.195137 ! Fit after self-cal, rms=0.112772Jy sigma=1.194702 ! Inverting map ! Added new window around map position (4.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448369 Jy ! Component: 100 - total flux cleaned = 0.00521231 Jy ! Component: 150 - total flux cleaned = 0.00538147 Jy ! Component: 200 - total flux cleaned = 0.00530094 Jy ! Total flux subtracted in 200 components = 0.00530094 Jy ! Clean residual min=-0.003144 max=0.004202 Jy/beam ! Clean residual mean=0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.422043 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.422043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112520Jy sigma=1.187885 ! Fit after self-cal, rms=0.112488Jy sigma=1.187386 ! Inverting map ! Added new window around map position (1.8, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348197 Jy ! Component: 100 - total flux cleaned = 0.00456231 Jy ! Component: 150 - total flux cleaned = 0.00485527 Jy ! Component: 200 - total flux cleaned = 0.00479343 Jy ! Total flux subtracted in 200 components = 0.00479343 Jy ! Clean residual min=-0.002771 max=0.003256 Jy/beam ! Clean residual mean=0.000001 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.426837 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.426837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112317Jy sigma=1.182393 ! Fit after self-cal, rms=0.112309Jy sigma=1.182213 ! Inverting map ! Added new window around map position (-15.8, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243518 Jy ! Component: 100 - total flux cleaned = 0.00289177 Jy ! Component: 150 - total flux cleaned = 0.00329594 Jy ! Component: 200 - total flux cleaned = 0.0033483 Jy ! Total flux subtracted in 200 components = 0.0033483 Jy ! Clean residual min=-0.002528 max=0.003022 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.430185 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 0.430185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112212Jy sigma=1.179376 ! Fit after self-cal, rms=0.112210Jy sigma=1.179204 ! Inverting map ! Added new window around map position (-8, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197723 Jy ! Component: 100 - total flux cleaned = 0.00230716 Jy ! Component: 150 - total flux cleaned = 0.00247984 Jy ! Component: 200 - total flux cleaned = 0.00284907 Jy ! Total flux subtracted in 200 components = 0.00284907 Jy ! Clean residual min=-0.002513 max=0.002563 Jy/beam ! Clean residual mean=0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.433034 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 106 components and 0.433034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112103Jy sigma=1.176835 ! Fit after self-cal, rms=0.112105Jy sigma=1.176661 ! Inverting map ! Added new window around map position (-4.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196383 Jy ! Component: 100 - total flux cleaned = 0.000416263 Jy ! Component: 150 - total flux cleaned = 0.000293572 Jy ! Component: 200 - total flux cleaned = 0.000458237 Jy ! Total flux subtracted in 200 components = 0.000458237 Jy ! Clean residual min=-0.002382 max=0.002231 Jy/beam ! Clean residual mean=0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.433492 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.433492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112006Jy sigma=1.173937 ! Fit after self-cal, rms=0.112013Jy sigma=1.173829 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112013Jy sigma=1.173829 ! Fit after self-cal, rms=0.113754Jy sigma=1.171564 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7926 mas, bmaj=1.657 mas, bpa=-2.14 degrees ! Estimated noise=0.249595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239074 Jy ! Component: 100 - total flux cleaned = 0.000708347 Jy ! Component: 150 - total flux cleaned = 0.00112933 Jy ! Component: 200 - total flux cleaned = 0.00127246 Jy ! Total flux subtracted in 200 components = 0.00127246 Jy ! Clean residual min=-0.001773 max=0.001998 Jy/beam ! Clean residual mean=0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.434765 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 0.434765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113694Jy sigma=1.169929 ! Fit after self-cal, rms=0.113701Jy sigma=1.169876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 27.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133987 Jy ! Component: 100 - total flux cleaned = 0.0016637 Jy ! Component: 150 - total flux cleaned = 0.00200373 Jy ! Component: 200 - total flux cleaned = 0.00236104 Jy ! Total flux subtracted in 200 components = 0.00236104 Jy ! Clean residual min=-0.001697 max=0.001764 Jy/beam ! Clean residual mean=0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.437126 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 148 components and 0.437126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113658Jy sigma=1.168618 ! Fit after self-cal, rms=0.113654Jy sigma=1.168594 ! Inverting map ! Added new window around map position (-3.4, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155329 Jy ! Component: 100 - total flux cleaned = 0.00250674 Jy ! Component: 150 - total flux cleaned = 0.00312247 Jy ! Component: 200 - total flux cleaned = 0.00363571 Jy ! Total flux subtracted in 200 components = 0.00363571 Jy ! Clean residual min=-0.001572 max=0.001491 Jy/beam ! Clean residual mean=0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.440762 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 168 components and 0.440762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113619Jy sigma=1.167628 ! Fit after self-cal, rms=0.113617Jy sigma=1.167556 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113617Jy sigma=1.167556 ! Fit after self-cal, rms=0.113944Jy sigma=1.167263 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.826 mas, bmaj=2.74 mas, bpa=2.699 degrees ! Estimated noise=0.342494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141976 Jy ! Component: 100 - total flux cleaned = 0.002266 Jy ! Component: 150 - total flux cleaned = 0.00294393 Jy ! Component: 200 - total flux cleaned = 0.0035675 Jy ! Total flux subtracted in 200 components = 0.0035675 Jy ! Clean residual min=-0.001954 max=0.001936 Jy/beam ! Clean residual mean=0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.444329 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 189 components and 0.444329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113924Jy sigma=1.166920 ! Fit after self-cal, rms=0.113924Jy sigma=1.166869 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582628 Jy ! Component: 100 - total flux cleaned = 0.000948492 Jy ! Component: 150 - total flux cleaned = 0.00123487 Jy ! Component: 200 - total flux cleaned = 0.00150341 Jy ! Total flux subtracted in 200 components = 0.00150341 Jy ! Clean residual min=-0.001847 max=0.001858 Jy/beam ! Clean residual mean=0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.445833 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 200 components and 0.445833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113914Jy sigma=1.166696 ! Fit after self-cal, rms=0.113911Jy sigma=1.166681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7921 mas, bmaj=1.656 mas, bpa=-2.142 degrees ! Estimated noise=0.249501 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7921 x 1.656 at -2.142 degrees (North through East) ! Clean map min=-0.0081183 max=0.4093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6184 mas, bmaj=1.401 mas, bpa=-3.97 degrees ! Estimated noise=0.505907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316542 Jy ! Component: 100 - total flux cleaned = 0.385737 Jy ! Component: 150 - total flux cleaned = 0.407946 Jy ! Component: 200 - total flux cleaned = 0.415157 Jy ! Total flux subtracted in 200 components = 0.415157 Jy ! Clean residual min=-0.006263 max=0.008594 Jy/beam ! Clean residual mean=0.000002 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.415157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.415157 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7921 mas, bmaj=1.656 mas, bpa=-2.142 degrees ! Estimated noise=0.249501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842848 Jy ! Component: 100 - total flux cleaned = 0.0134273 Jy ! Component: 150 - total flux cleaned = 0.0150725 Jy ! Component: 200 - total flux cleaned = 0.0158748 Jy ! Total flux subtracted in 200 components = 0.0158748 Jy ! Clean residual min=-0.003324 max=0.003690 Jy/beam ! Clean residual mean=0.000001 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.431032 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.431032 Jy ! Inverting map ! Added new window around map position (-4.4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187271 Jy ! Component: 100 - total flux cleaned = 0.00252838 Jy ! Component: 150 - total flux cleaned = 0.00337708 Jy ! Component: 200 - total flux cleaned = 0.00382449 Jy ! Total flux subtracted in 200 components = 0.00382449 Jy ! Clean residual min=-0.002727 max=0.002850 Jy/beam ! Clean residual mean=0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.434857 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.434857 Jy ! Inverting map ! Added new window around map position (10, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153112 Jy ! Component: 100 - total flux cleaned = 0.0022326 Jy ! Component: 150 - total flux cleaned = 0.00278536 Jy ! Component: 200 - total flux cleaned = 0.0032216 Jy ! Total flux subtracted in 200 components = 0.0032216 Jy ! Clean residual min=-0.002200 max=0.002372 Jy/beam ! Clean residual mean=0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.438078 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 0.438078 Jy ! Inverting map ! Added new window around map position (8.8, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106449 Jy ! Component: 100 - total flux cleaned = 0.00147126 Jy ! Component: 150 - total flux cleaned = 0.00155247 Jy ! Component: 200 - total flux cleaned = 0.00169712 Jy ! Total flux subtracted in 200 components = 0.00169712 Jy ! Clean residual min=-0.001849 max=0.001854 Jy/beam ! Clean residual mean=0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.439776 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 84 components and 0.439776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.826 mas, bmaj=2.74 mas, bpa=2.699 degrees ! Estimated noise=0.342494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113389 Jy ! Component: 100 - total flux cleaned = 0.00157806 Jy ! Component: 150 - total flux cleaned = 0.00187659 Jy ! Component: 200 - total flux cleaned = 0.00201637 Jy ! Total flux subtracted in 200 components = 0.00201637 Jy ! Clean residual min=-0.001939 max=0.001954 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.441792 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116918 Jy ! Component: 100 - total flux cleaned = 0.00121462 Jy ! Component: 150 - total flux cleaned = 0.00113177 Jy ! Component: 200 - total flux cleaned = 0.000941633 Jy ! Total flux subtracted in 200 components = 0.000941633 Jy ! Clean residual min=-0.001700 max=0.001488 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.442734 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 120 components and 0.442734 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7921 mas, bmaj=1.656 mas, bpa=-2.142 degrees ! Estimated noise=0.249501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607647 Jy ! Component: 100 - total flux cleaned = 0.000784893 Jy ! Component: 150 - total flux cleaned = 0.000838169 Jy ! Component: 200 - total flux cleaned = 0.000936379 Jy ! Total flux subtracted in 200 components = 0.000936379 Jy ! Clean residual min=-0.001560 max=0.001499 Jy/beam ! Clean residual mean=-0.000000 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.44367 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.44367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113862Jy sigma=1.167230 ! Fit after self-cal, rms=0.113818Jy sigma=1.166682 wmodel J1045+1735_X_map.mod ! Writing 142 model components to file: J1045+1735_X_map.mod wobs J1045+1735_X_uvs.fits ! Writing UV FITS file: J1045+1735_X_uvs.fits wwins J1045+1735_X_map.win ! wwins: Wrote 15 windows to J1045+1735_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196782 Jy ! Component: 100 - total flux cleaned = -0.000298512 Jy ! Component: 150 - total flux cleaned = -0.000514459 Jy ! Component: 200 - total flux cleaned = -0.000744549 Jy ! Component: 250 - total flux cleaned = -0.00101134 Jy ! Component: 300 - total flux cleaned = -0.00118365 Jy ! Component: 350 - total flux cleaned = -0.00124647 Jy ! Component: 400 - total flux cleaned = -0.00132836 Jy ! Component: 450 - total flux cleaned = -0.00132799 Jy ! Component: 500 - total flux cleaned = -0.00134807 Jy ! Component: 550 - total flux cleaned = -0.00142555 Jy ! Component: 600 - total flux cleaned = -0.00146318 Jy ! Component: 650 - total flux cleaned = -0.00146301 Jy ! Component: 700 - total flux cleaned = -0.00149954 Jy ! Component: 750 - total flux cleaned = -0.00151726 Jy ! Component: 800 - total flux cleaned = -0.00153423 Jy ! Component: 850 - total flux cleaned = -0.00155127 Jy ! Component: 900 - total flux cleaned = -0.00156825 Jy ! Component: 950 - total flux cleaned = -0.00155118 Jy ! Component: 1000 - total flux cleaned = -0.00153478 Jy ! Component: 1050 - total flux cleaned = -0.00151821 Jy ! Component: 1100 - total flux cleaned = -0.00148612 Jy ! Component: 1150 - total flux cleaned = -0.00148618 Jy ! Component: 1200 - total flux cleaned = -0.00143913 Jy ! Component: 1250 - total flux cleaned = -0.00143942 Jy ! Component: 1300 - total flux cleaned = -0.00143937 Jy ! Component: 1350 - total flux cleaned = -0.00143948 Jy ! Component: 1400 - total flux cleaned = -0.00143946 Jy ! Component: 1450 - total flux cleaned = -0.00143955 Jy ! Component: 1500 - total flux cleaned = -0.00138176 Jy ! Component: 1550 - total flux cleaned = -0.00141038 Jy ! Component: 1600 - total flux cleaned = -0.00138218 Jy ! Component: 1650 - total flux cleaned = -0.00142407 Jy ! Component: 1700 - total flux cleaned = -0.0013966 Jy ! Component: 1750 - total flux cleaned = -0.00141049 Jy ! Component: 1800 - total flux cleaned = -0.00146458 Jy ! Component: 1850 - total flux cleaned = -0.00142441 Jy ! Component: 1900 - total flux cleaned = -0.00139803 Jy ! Component: 1950 - total flux cleaned = -0.00142418 Jy ! Component: 2000 - total flux cleaned = -0.00137201 Jy ! Component: 2050 - total flux cleaned = -0.00139779 Jy ! Component: 2100 - total flux cleaned = -0.00137236 Jy ! Component: 2150 - total flux cleaned = -0.00135989 Jy ! Component: 2200 - total flux cleaned = -0.00142256 Jy ! Component: 2250 - total flux cleaned = -0.00136057 Jy ! Component: 2300 - total flux cleaned = -0.00136052 Jy ! Component: 2350 - total flux cleaned = -0.00133621 Jy ! Component: 2400 - total flux cleaned = -0.00133625 Jy ! Component: 2450 - total flux cleaned = -0.00133608 Jy ! Component: 2500 - total flux cleaned = -0.00128874 Jy ! Component: 2550 - total flux cleaned = -0.00130053 Jy ! Component: 2600 - total flux cleaned = -0.00125401 Jy ! Component: 2650 - total flux cleaned = -0.00128865 Jy ! Component: 2700 - total flux cleaned = -0.00126581 Jy ! Component: 2750 - total flux cleaned = -0.00124325 Jy ! Component: 2800 - total flux cleaned = -0.00128812 Jy ! Component: 2850 - total flux cleaned = -0.00126585 Jy ! Component: 2900 - total flux cleaned = -0.00122166 Jy ! Component: 2950 - total flux cleaned = -0.00126571 Jy ! Component: 3000 - total flux cleaned = -0.00128742 Jy ! Component: 3050 - total flux cleaned = -0.00128739 Jy ! Component: 3100 - total flux cleaned = -0.00128751 Jy ! Component: 3150 - total flux cleaned = -0.00130863 Jy ! Component: 3200 - total flux cleaned = -0.00131908 Jy ! Component: 3250 - total flux cleaned = -0.00126682 Jy ! Component: 3300 - total flux cleaned = -0.00130843 Jy ! Component: 3350 - total flux cleaned = -0.00132899 Jy ! Component: 3400 - total flux cleaned = -0.00127789 Jy ! Component: 3450 - total flux cleaned = -0.00132867 Jy ! Component: 3500 - total flux cleaned = -0.00129842 Jy ! Component: 3550 - total flux cleaned = -0.00132843 Jy ! Component: 3600 - total flux cleaned = -0.00134836 Jy ! Component: 3650 - total flux cleaned = -0.00135826 Jy ! Component: 3700 - total flux cleaned = -0.00136796 Jy ! Component: 3750 - total flux cleaned = -0.00138745 Jy ! Component: 3800 - total flux cleaned = -0.00135846 Jy ! Component: 3850 - total flux cleaned = -0.00140652 Jy ! Component: 3900 - total flux cleaned = -0.00145428 Jy ! Component: 3950 - total flux cleaned = -0.00145423 Jy ! Component: 4000 - total flux cleaned = -0.00144474 Jy ! Component: 4050 - total flux cleaned = -0.0014353 Jy ! Total flux subtracted in 4096 components = -0.0014726 Jy ! Clean residual min=-0.000554 max=0.000565 Jy/beam ! Clean residual mean=-0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.442197 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 426 components and 0.442197 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1045+1735_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7921 x 1.656 at -2.142 degrees (North through East) ! Clean map min=-0.0023358 max=0.40652 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1045+1735_X_map.fits wmodel /vlbi/uf001/uva//J1045+1735_X_map.mod ! Writing 426 model components to file: /vlbi/uf001/uva//J1045+1735_X_map.mod wobs /vlbi/uf001/uva//J1045+1735_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1045+1735_X_uvs.fits wwins /vlbi/uf001/uva//J1045+1735_X_map.win ! wwins: Wrote 16 windows to /vlbi/uf001/uva//J1045+1735_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.406524 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156378 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115402 0.115402 0.230803 0.461606 0.923212 1.84642 3.69285 7.3857 14.7714 29.5428 59.0856 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.406 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2599.62 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1045+1735_X_dfm.log closed on Mon Jan 14 01:00:10 2019